Patton electronic 2211 User Manual

E
thernet continues to be the predomi-
nant office networking infrastructure.
Now, Ethernet has made its way from
the office to the shop floor. Traditional serial
environments require the use of multi-port
serial cards, expensive cables, and the per-
Model 2211 Single-Port Device Server pro-
vides a quick, inexpensive, and hassle-free
nals and devices to a local area network
(LAN).
The Model 2211 links legacy serial RS-232
devices to the network by encapsulating
serial data into IP packets for transport over
the wireless LAN. Using TCP or TELNET, the
Model 2211 can connect to any user-defined
IP address and port. Once connected to the
remote host, data is passed transparently
end-to-end. The built-in DHCP Client allows
the Model 2211 to dynamically obtain an IP address and a subnet mask from a master server. COM Port Redirector is included with Patton’s 2211 enabling companies to use their existing COM/TTY-based software, pre­venting the hassle and expense of investing in additional software.
Physical layer-connectivity is provided via an RS-232 serial port and a 10BaseT Ethernet port. Configure the serial port’s data rate, ranging from 1200bps to 115.2 kbps, and choose from a variety of connector types including DB9 or DB25 male or female.
Patton’s Model 2211 offers the lowest transi­tion cost in turning your serial infrastructure
to IP.
Visit www.patton.com for more
information.
Best, most cost-effective method to control, monitor, and collect data from your RS-232 serial devices over a wire­less local area network.
EtherBITS™ Wireless Device Server
Model 2211
Device Servers
Control and Monitor Serial Device
Control and monitor your serial asynchronous terminals and devices over the local area network
Connects Directly to the Wireless LAN
802.11b WiiFi 10Base-T LAN connection via built-in WiFi module; 64-bit WEP security
Standard TCP/IP Protocols Supported
ARP, ICMP, TCP, DHCP client, Telnet
Supports a Wide Range of Data Rates
User-selectable async data rates up to 115.2 kbps
Special Rates
Available
Call for Details
COM Port Redirector Software Included
Windows- Tactical COM Port Redirector Linux­vtty drivers
EtherBITS…Connect with confidence.
Built-in Patton know­how. We have been build­ing interface conversion devices since 1984!
LEDs for monitoring Ethernet link and activity
DIN Rail Kit Available
Serial RS-232:
• DB-9 Male or Female
• DB-25 Male or Female via cable
• Async data rates up to 115 kbps
10Base-T 802.11b Wireless LAN con­nects to wireless Ethernet hub/switch
Locking style barrel con­nector provides secure power connection
07M2211-DS3
Patton is a registered trademark, and TrinityAE and Visuality are trademarks of Patton Electronics Company in the United States and other countries.
Specifications
Typical Applications
Mechanical Interface
Serial: DB-9M/F; DB-25M/F; Ethernet:
WiFi 802.11b
Serial Transmission
RS-232 Rates from 1200 bps to 115
kbps
Ethernet Transmission
802.11b Wireless Ad Hoc/Infrastructure Modes; 10Base-T Ethernet
Management
Monitoring, control, and diagnostics via serial port or TELNET session
LED Indicators
Power, Ethernet Link and Activity
Power
External AC: 9–30 VDC, 300mA at 9 VDC
Compliance
EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
Environment
Temperature: 40–122°F (5–50°C); Humidity: Up to 90% non-condensing
Dimensions
4.5L x 3.2W x 1.0H in.
(9.0L x 5.3W x 1.9H cm)
Weight
Packaged: 0.66 lbs (300 g)
Unit Only: 0.55 lbs (250 g)
Model 2211
Model 2211
Ad Hoc Mode
PBX
console
port
PC
serial port
Model 2211
Model 2211
Router
Price scanner
Wireless access points
Host computer
POS
Infrastructure Mode
The Model 2211 Single-Port Device Server is used to
connect various RS-232 serial devices to the Local Area
Network through their serial control ports. The 2211
enables monitoring, control, and data collection from
this equipment by remote computers located anywhere
on the local or wide area network. Both Ad hoc and
Infrastructure mode is supported on the 2211.
COM Port redirector is provided for users who choose to
use their existing serial communication application pro-
grams. Utilizing the COM Port redirector software pro-
vided on the Patton Model 2211 allows existing
COM/TTY-based software to be preserved, thus no addi-
tional investment is required on additional software.
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Switzerland
Phone
++4411 ((3311)) 998855 22 55 2255
Fax
++4411 ((3311)) 998855 22 55 2266
E-mail
ssaalleess@@iinnaallpp..ccoomm
Web
wwwwww..iinnaallpp..ccoomm
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
USA
Phone
++11 330011 997755 11000000
Fax
++1
1 330011 886699 99229933
E-mail
ssaalleess@@ppaattttoonn..ccoomm
Web
wwwwww..ppaa ttttoonn..ccoomm
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone
++9911 44 44 4455 44 99 00 33 99 55// 66 // 77
Fax
++9911 44 44 4455 44 99 ..00339944
Email
ssaall ee ss @@p
paatt tt oonn .. cc oo.. ii nn
Web
wwww ww .. pp aa tttt oonn..ccoo.. ii nn
An Associate of
Electronics Co., USA
Loading...