07M2172R- DS4
Patton is a registered trademark of Patton
Electronics Company in the United States
and other countries.
Workgroup Ethernet Extension Application
Specifications*
CopperLink line interface: RJ-45 (pin 4
= ring; pin5=tip); two position terminal block
Ethernet interface: 8-position shielded
RJ-45. Auto-sensing 10/100Base-T with
half or full-duplex operation. DIP switch
capable of disabling 100-Mbps fullduplex for equipment that does not
support 802.3X (Pause Packets)
Protocol: Transparent to high layer protocol. Supports 802.1Q VLAN tagging
Modulation: Quadrature Amplitude
Modulation (QAM) 4-band
Duplexing Method: FDD (Frequency
Division Duplexing)
Frequency Range: CopperLink:
0–12 MHz
Transmission: CopperLink line rate: Up
to 100 Mbps full duplex
Surge suppression: CopperLink line transient peak surge maximum: 200A
(8/20µs)
Front Panel Indicators: Power, Link,
Ethernet
Power Supply: External AC and DC
options: 120VAC, and universal input
(UI)—100–240 VAC, or optional -48
VDC, -24 VDC, or -12 VDC
Compliance: FCC Part 15A, CE Mark,
EMC Directive 89/336/EEC, Low-Voltage
Directive 73/23/EEC
Temperature
Standard: -10 to 70°C
Conformal Coated: -10 to 80°C
Humidity
Standard: Up to 90% non-condensing
Conformal Coated: 85% condensing
humidity from -10 to 35°C
Dimensions: 1.12H x 5.57W x 3.57D in.
(2.84H x 14.15W x 9.07D cm) with
brackets
1.12H x 4.44W x 3.57D in. (2.84H x
11.28W x 9.07D cm) without brackets
Weight: 0.4 lbs (0.18 kg) without
power supply
* Specifications subject to change without notice.
The Model 2172R multi-rate Ethernet Extenders are ideal for delivering
Ethernet links to remote buildings that are beyond the 328-foot (100-meter)
distance limit of Ethernet. The 100 Mbps throughput eliminates bandwidth
concerns previously experienced with other copper wired transmission technologies. By utilizing existing voice grade copper pairs the expense and hassle of installing low capacitance or fiber cable is no longer required.
Extend 10/100Base-TX Ethernet to reach
beyond its natural limitations
Up to 800 feet (243 meters) at 100 Mbps full
duplex over voice-grade twisted-pair
Pick &
place machine
Office
Model 2172
Model 2172R
Asymmetrical Line Rates
Line Rates (AWG 24/0.5 mm)
Distance in ft (m)
6,000 (1,830)
4,000 (1,200)
2,000 (610)
1
1
2
4
16
50
Upstream in Mbps Downstream in Mbps
Symmetrical Line Rates
Line Rates (AWG 24/0.5 mm)
Distance in ft (m)
10
25
50
10
25
50
Upstream in Mbps Downstream in Mbps
4,000 (1,200)
2,000 (610)
800 (245)
EnviroNET™models
also available
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Switzerland
Phone +41 (31) 985 25 25
Fax +41 (31) 985 25 26
E-mail sales@inalp.com
Web www.inalp.com
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
USA
Phone +1 301 975 1000
Fax +1 301 869 9293
E-mail sales@patton.com
Web www.patton.com
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone +91 44 45490395/6/7
Fax +91 44 4549.0394
Email sales@patton.co.in
Web www.patton.co.in
An Associate of
Electronics Co., USA