Patton electronic 1058 User Manual
USER
MANUAL
MODEL 1058
VLINK Modem
An ISO-9001Certified
Company
Part# 07M1058-B
Doc# 058091UB
Revised 6/10/02
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
1.0 Warranty Information ................................................................. 3
1.1 Radio and TV Interference............................................................ 3
1.2 CE Notice...................................................................................... 3
1.3 FCC Part 68 (1058DV Only)......................................................... 4
1.4 Industry Canada Notice................................................................ 5
1.5 Service.......................................................................................... 5
2.0 General Information.................................................................... 6
2.1 Features........................................................................................ 6
2.2 Description.................................................................................... 6
3.0 Installation................................................................................... 8
3.1 Standalone unit installation........................................................... 8
3.2 Rack card installation.................................................................... 8
3.3 Connecting the Twisted-Pair Line Interface................................ 10
3.4 Connecting the 10/100Base-T Ethernet Interface ...................... 11
Connecting the 10/100Base-T Ethernet Port to a Hub............... 11
Connecting the 10/100Base-T Ethernet Port to a PC (DTE)...... 12
3.5 Connecting the POTS/ISDN line................................................. 12
3.6 Connecting Power ...................................................................... 13
4.0 Operation................................................................................... 14
4.1 Power Up.................................................................................... 14
4.2 Front Panel LED Status Monitors............................................... 14
A Specifications ........................................................................... 16
A.1 LAN Connection .......................................................................... 16
A.2 Transmission Line ....................................................................... 16
A.3 VDSL Line Rate ........................................................................... 16
A.4 Actual Data Rate ......................................................................... 16
A.5 VDSL Distance ............................................................................ 16
A.6 VDSL Surge Suppressor ............................................................. 16
A.7 LED Status Indicators ................................................................. 16
A.8 Power Supply .............................................................................. 16
A.9 Temperature Range .................................................................... 16
A.10 Humidity ...................................................................................... 16
A.11 Dimensions ................................................................................. 16
B Model 1058 Series Factory
Replacement Parts and Accessories...................................... 17
C Model 1058 Series Interface Pin Assignment ........................ 19
C.1 10/100Base-T Interface .............................................................. 19
RJ-45.......................................................................................... 19
C.2 VDSL Interface ............................................................................ 19
RJ-45.......................................................................................... 19
Terminal Block............................................................................ 19
C.3 POTS/ISDN Interface .................................................................. 19
RJ-45.......................................................................................... 19
2
1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 1058 components to be free from
defects, and will—at our option—repair or replace the product should it
fail within one year from the first date of the shipment.
This warranty is limited to defects in workmanship or materials, and does
not cover customer damage, abuse or unauthorized modification. If this
product fails or does not performs as warranted, y our sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics
be liable for any damages incurred b y the use of this
product. These damages include, but are not limited to, the follo wing: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product.
Patton Electronics
specifically disclaims all other warranties, expressed or implied, and the
installation or use of this product shall be deemed an acceptance of
these terms by the user.
Note
Conformity documents of all Patton products can be viewed
online at www.patton.com under the appropriate product page.
1.1 RADIO AND TV INTERFERENCE
The Model 1058 generates and uses radio frequency energy, and if not
installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television reception. The Model 1058 has been tested and found to comply with the limits
for a Class A computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable
protection from such interference in a commercial installation. However,
there is no guarantee that interference will not occur in a particular installation. If the Model 1058 does cause interference to radio or television
reception, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the follo wing measures: moving the computing equipment away from the receiver,
re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and
receiver are on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is
in compliance with the Electromagnetic Compatibility (EMC) directive
and the Low Voltage Directive (LVD) of the European Union (EU). A Certificate of Compliance is available by contacting Technical Support.
3
1.3 FCC PART 68 (1058DV ONLY)
The Model 1058D is not intended to be connected to the
public telephone network.
Caution
The VLINK port is not intended to be connected to the
public telephone network. The 1058DV contains a
POTS/ISDN connection that can be connected to the
public telephone network.
Caution
This equipment complies with Part 68 of the FCC Rules. Please note the
following:
1. You are required to request service from the telephone company
before you connect the Model 1058DV to a network. When you
request service, you must provide the telephone company with the
following data.
— The required Universal Service Order code (USOC) jack: RJ-
11C
— The make, model number, Ringer Equivalence Number (REN),
and FCC Registration number of the Model 1058DV.
The REN helps you determine the number of devices you can connect to your telephone line and still have all of those devices ring
when your number is called. In most, but not all, areas, the sum of
the RENs of all devices should not exceed fiv e (5.0). To be certain of
the number of devices you can connect to your line, you should call
your local telephone company to determine the maximum REN.
— The Facility Interface Code:
— The Service Order Code(s) (SOC):
— REN No.:
2. Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper functioning of your equipment. The telephone company will notify in
advance of such changes to give you an opportunity to maintain
uninterrupted telephone service.
0.2
02LS2
9.0F
4
3. If your Model 1058DV causes harm to the telephone network, the
telephone company may temporarily discontinue your service. If
possible, they will notify you in advance, but if advance notice is not
practical, you will be notified as soon as possible and will be
informed of your right to file a complaint with the FCC.
4. If you experience trouble with the Model 1058DV, please contact
Patton Electronics Company for service or repairs. Repairs should
be performed only by Patton Electronics Co.
5. You are required to notify the telephone company when you discon-
nect the Model 1058DV from the network.
1.4 INDUSTRY CANADA NOTICE
NOTICE: This equipment meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed b y the registr ation
number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of conformity
indicating that Industry Canada technical specifications were met. It does
not imply that Industry Canada approved the equipment.
1.5 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
• Tel: +1
• Email:
• URL:
Note
(301) 975-1007
support@patton.com
http://www.patton.com
Packages received without an RMA number will not be
accepted.
5
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
• Easy to install standalone VLINK modems—
no configuration required
• Auto-sensing full or half-duplex Ethernet
• Auto-sensing 10/100Base-T
• Extends network connections up to 4,652 ft (1,418 m) over 2-wire 24-
AWG unconditioned lines
• 12.5 Mbps symmetric line rate; 10 Mbps data rate
• POTS/ISDN splitter on board
• Transparent operation
• LED indicators for Pow er , Ethernet Link & Activity, VLINK & Quality of Line
(QOL)
• Surge suppression up to 20 kA (8/20 µs)
• Available in rack-mount or standalone configurations
• Made in the USA
2.2 DESCRIPTION
The Patton Electronics Model 1058/CO* and 1058/CP VDSL* modems
provide high-speed LAN connections between peered Ethernet LANs,
remote PC’s, or any other network enabled 10/100Base-T device.
Operating in pairs, a Model 1058/CO (central office) located at one end of
the LAN extension and a Model 1058/CP (customer premise) at the other
end, these units can automatically forward LAN broadcasts, multicasts,
and frames across a 2-wire voice-grade twisted-pair link. The data is
passed transparently (that is, unmodified) through the 1058s. The 1058s
* Only Models 1058DV/CO and 1058DV/CP have POTS/ISDN split-
ters on board.
6
Loading...