Patriot PV770MRUMXGM-US User Manual
USB/AUDIO
PASS THROUGH PORT
AIRCRAFT GRADE
ALUMINUM CHASSIS
108 PROGRAMMABLE
MACRO KEYS
109 KEY ROLLOVER
ANTI-GHOSTING
FULL SPECTRUM RGB
16 .8 M ILLION COL ORS FOR
INDIVIDU ALLY CUST OMIZABLE
BACKL IT KEY S
LIGHT CONTROL
KEYS
5 LIGHTING
PROFILE KEYS
MULTIMEDIA KEYS
VOLUME/MUTE WHEEL
INTRODUCTION
Thank you for purchasing the Viper V770 gaming keyboard. The V770 uses quiet mechanical Kailh Red switches for smooth
linear feel and quick response times. Each key can be customized to 16.8 million colors using the Viper software. The keyboard features a 109 key layout with N-key rollover and anti-ghosting functions, and has 108 programmable macro keys with
5 dedicated macro keys on the side. The onboard controls give you access to light effects, multi-media controls, lighting pro-
les and a dedicated volume/mute wheel.
The V770 is built with an aluminum chassis and illuminated magnetic palm rest for durability and comfort during hours of
game play. Backed by Patriot’s award winning customer service and a two year warranty, the V770 is compatible with nearly
every Windows® operating system, including Windows® 10, Mac® OS X, or higher.
5 DEDICATED
MACRO KEYS
REMOVABLE MAGNETIC
LED PALM REST
SPECIFICATIONS
• 100% mechanical Kailh Red switches
• LED illuminated and removable magnetic palm rest
• Full spectrum RGB backlit keys,
individually customizable with 16.8 million colors
• 108 programmable macro keys
• 5 dedicated macro keys
• Aircraft grade aluminum chassis
• USB pass through port
• Audio pass through port
• Dedicated multimedia control keys
• Dedicated volume and mute wheel
• Dedicated light effect control keys
• Game mode
• N-key rollover anti-ghosting
• 5 Prole control key
• 10 level LED reaction management
• Multi-level LED backlit dimming
PACKAGE CONTENTS
• Viper V770 gaming keyboard
• Detachable magnetic palm rest
• Keycap remover
• 3.5mm Y-splitter
• Quick start guide
• Viper sticker
The Viper software adds the ability to program macro, set up custom lighting proles, and congure the keyboard’s settings.
(**Note Viper software is not compatible with MAC® OS).
HARDWARE INSTALLATION
INSTALLATION
HARDWARE INSTALLATION
Connect the keyboard to two available USB ports on the computer. Wait 5-10 seconds for the keyboard to be recognized by the
computer.
SOFTWARE INSTALLATION
Please download the Viper software from the product page at http://www.patriotmemory.com to be able to create and manage
macros, create lighting proles, adjust latency, response time, and more.
Once downloaded, double-click on the software to start the installation. Follow the onscreen instructions to nish the process.
**Viper software is not compatible with Mac® OS.
MULTI-MEDIA KEYS AND VOLUME WHEEL
KEYBOARD SHORTCUTS
Play/Pause
Stop
Next Screen
Previous Screen
Previous Track
Volume Up
Volume Down
Mute (press wheel)
Next Track
BACKLIGHT RECORDING MODES
Record and Save custom LED Proles
BACKLIGHT RECORDING MODES
Press FN+F12 for F1-F5 to enter a blinking
state in preparation to record a custom key
conguration. Once in this blinking state,
select any of the F1-F5 keys to assign a
conguration.
Press any key in recording mode to illuminate it,
When recording is complete, then press
making it part of your customized lighting prole.
FN+F12 again to save your customized
prole.
I.e. if keys WASD were selected, WASD will be illuminated, indicating that these keys were recorded
Repeat the previous steps as needed to
and assigned to the selected “F” key.
complete the recording of other customized
proles.
Press FN+F1 through F5 key to activate the
custom prole desired.
WAVE/SPOTLIGHT/RADAR MODES
Press FN+ -Continuously to alternate between modes
LIGHTING EFFECTS
FN+ -WAVE MODE
A wave of light will travel across the keyboard.
To change the direction of the wave pattern, press
FN + arrow key. The wave will travel from right to
left, left to right, top to bottom, or bottom to top
based on the arrow key you select.
FN+PgUp
Increases Speed of Wave Mode
FN+UpArrow
Increases Speed of Wave Mode
FN+UpArrow
Increases Speed of Wave Mode
FN+ X2-SPOTLIGHT MODE
Two patterns of light will travel across the keyboard intersecting in the middle. The LED will
change color constantly.
FN+ Any Arrow Key
Alternates the direction of the radar
clockwise or counter clockwise
FN+ X3-RADAR MODE
A pattern of light will revolve around the center of
the keyboard. To change the direction of the radar pattern, press FN + arrow key.
FN+ Any Arrow Key
Alternates the direction of the radar
clockwise or counter clockwise
FN+PgDn
Decreases Speed of Wave Mode
FN+DownArrow
Decreases Speed of Wave Mode
FN+DownArrow
Decreases Speed of Wave Mode
Loading...