®
OPERATION MANUAL
®
PROFESSIONAL AUDIO & SOUND
Procast50
Portable Sound System
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE
CAUTION !
Manual
REV. 1.3
OM 218
THIS APPLIANCE TO RAIN OR MOISTURE
CUSTOMER SERVICE
REPAIR SERVICE
REPLACEMENT PARTS
Repair service for out of warranty Paso products may be
obtained form your local Paso distributor or any other
Please provide complete information when you request
replacement parts from either the Factory or a Paso Authorized
qualified repair station.
In warranty repairs must be returned to the Factory.
Prior authorization must be obtained from the Factory.
Distributor. Be certain to include the Part Number and Description
as it appears on the parts list, the Model Number of the unit and if
possible the Serial Number and the date of purchase of the unit.
Replacement parts inventory is maintained specifically to repair
Products received without authorization will be refused by
our Receiving Department.
Paso products. Part sales for other reasons or applications will be
declined.
IN WARRANTY REPAIR SERVICE
ORDERING FROM THE FACTORY
®
Call or write the Factory to obtain an authorization to
return
the product for repairs.
Pack the equipment in the original carton or in a strong
carton with at least THREE INCHES of resilient packing
material on all sides, top and bottom. Seal the carton with
reinforced tape and mark it FRAGILE on at least two
sides. Remember, the Carrier will not accept liability for
shipping damages if the unit is improperly packed.
EQUIPMENT RECEIVED IN DAMAGED CONDITION
DUE TO POOR PACKING WILL BE REFUSED AND
THE WARRANTY COVERAGE IS AUTOMATICALLY
VOIDED.
The Paso Sound Limited Warranty provides:
The examination of the returned product must disclose in
our judgement, a manufacturing defect. The warranty
does not extend to any product that has been subject to
misuse, neglect, accident, improper installation or where
the serial number of the product has been removed or
defaced.
Ship via insured prepaid United Parcel Service or Parcel
Post to:
PASO SOUND PRODUCTS, INC.
4750 Goer Drive - Building F
CHARLESTON, SC 29406
ATTN. SERVICE DEPARTMENT
The equipment will be returned freight prepaid after
repairs.
Be sure to include the following:
- Your name and address
- Date of purchase and copy of invoice
- A brief description of the difficulty
- A return address shipping label-OUT OF WARRANTY REPAIR SERVICE
Follow return instructions as per in warranty repair
service. Prior to performing all necessary repairs, you will
be advised of the charges and at that time a written
authorization by you will be required including
authorization to return the equipment COD for the service
and shipping charges. This will avoid unnecessary delays
Manual
REV. 1.3
OM 218
PROFESSIONAL AUDIO & SOUND
Paso Sound Products, Inc.
Web site: http://www.pasosound.com E-mail: info@pasosound.com
4750 F Goer Drive - Charleston, South Carolina 29406 / TEL: 1-800-231-3034 FAX: 843-308-0904
Print all information on a purchase order form and mail to:
PASO SOUND PRODUCTS, INC.
4750 Goer Drive - Building F
CHARLESTON, SC 29406
Be sure to include the following:
- Paso part number
- Part description
- Quantity required
- Model number of the unit
- Serial number of the unit
- Your payment or your authorization for COD shipment for parts
not covered by the Warranty or if your company has a current
account with the factory
RETAIN ORIGINAL PARTS (IN WARRANTY) UNTIL YOU
RECEIVE REPLACEMENTS. DEFECTIVE PARTS THAT
SHOULD BE RETURNED TO THE FACTORY WILL BE LISTED
ON YOUR PACKING SLIP.
For your convenience replacement parts are also available through
Paso Authorized Distributors and Dealers nation wide. Obtain a
location list directly from the Factory or your regional Paso
Representative.
TECHNICAL CONSULTATION
- Need help with your installation ?
- Need help with the operation of the unit ?
- Need help with a repair ?
Call or write for assistance. You will find our Technical Dept. eager
to help or assist you with any technical problem you may have
encountered except “`Customizing'' for a unique application.
The effectiveness of our consultation service depends on
the accuracy of the information you furnish.
Be sure to tell us:
- The Model and Serial number of the unit
- The date of purchase
- An exact description of the difficulty
- All trouble-shooting done in attempting to correct the problem
Call our toll-free phone number:
1-800 231 3034
Printed in USA 2006
®
PROFESSIONAL AUDIO & SOUND
PASO Procast50®
®
PROFESSIONAL AUDIO & SOUND
PASO Procast50®
Max. 50/30W (RMS) / 4 Load
<0.5%
MHz
Infra-Redreceiver/Wireless receiver/
UHF 750
MP3
CD/ / Wired Mic / Line In
6 1/2" full range speaker
Built-in Battery
12V / 2.9Ah about 4 hours
UHF Band model and Infrared model
Paso or other compatible brand
MW223-MW226-MIW333-MIW335
Speaker/ Line out
313, 220, 215
5.5
1
Black , steel gray
®
Item Specification
PROFESSIONAL AUDIO & SOUND
Max. Power Output
Distortion
Frequency Range
Input
Speaker System
Power Supply
Charging Time
Receiver Module
Wired microphone
Wireless microphone
Output
Dimension (H, W, D, mm)
Weight (Basic unit)(kg)
PROCAST50 OPERATION MANUAL
Specification
Color
PAGE INTENTIONALLY LEFT BLANK
28
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules .These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
¡Reorient or relocate the receiving antenna.
¡Increase the separation between the equipment and receiver.
¡Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
¡Consult the dealer or an experienced radio/TV technician for help.:To assure continued compliance,(example-use only shielded interface cables when connecting to
FCC Caution
computer or peripheral devices).Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions(1)This device may not cause harmful interference, and (2)this device must accept any
27
interference received, including interference that may cause undesired operation.
P
F
TREBLE
E
N
DC IN
12-15V4A
K
MUTE
C D
B
A
MIC AUX WR1/IR1 WR2/IR2 BASS
®
PASO Procast50®
Q
O
3A 250V
OPENOPEN
M
L
MIC
AUX
IR1/ WR1
IR2/ WR2
BASS
TREBLE
MIC IN
AUX IN
AUX OUT
WR1 CHANNEL SELECTOR
WR2 CHANNEL SELECTOR
DC INPUT
FUSE
VOICE PRIORITY
M
NOP
POWER SWITCH
BATTERY COMPARTMENT RELEASE BUTTON
Q
2
J
EXT SPKR
I
Q
H
G
MIC IN AUX IN AUX OUT
ABCDEFG
EXTERNAL SPEAKER
HIJKL
UHF
Version
PROFESSIONAL AUDIO & SOUND
WPCS50
VHF/ IR
6
O
9
5
4
8
3
2
7
1
P
F
TREBLE
O
E
N
DC IN
12-15V4A
M
K
L
MUTE
C D
J
B
I
H
A
MIC AUX WR1/IR1 WR2/IR2 BAS S
G
PASO Procast50®
Q
3A 250V
OPENOPEN
MIC
AUX
IR1/ WR1
IR2/ WR2
BASS
TREBLE
MIC IN
AUX IN
AUX OUT
WR1 CHANNEL SELECTOR
WR2 CHANNEL SELECTOR
DC INPUT
FUSE
VOICE PRIORITY
M
NOP
POWER SWITCH
BATTERY COMPARTMENT RELEASE BUTTON
Q
P
I
EXT SPKR
ABCDEFG
EXTERNAL SPEAKER
HIJKL
3
Q
MIC IN AUX IN AUX OUT
LCD Display
REPEAT
1
1
2
A<->B
3
STOP
PLAY / PAUSE
598
4
PROG
6
SKIP
EJECT
7
SCAN / SEARCH
26
®
PAGE INTENTIONALLY LEFT BLANK
PROFESSIONAL AUDIO & SOUND
PAGE INTENTIONALLY LEFT BLANK
25
Fig. 6
6
9
5
4
8
3
2
7
1
®
PROFESSIONAL AUDIO & SOUND
e
d
c
b
POWER/MUT
p
a
i
l
VOL
DELETEREPEAT/EQSTOPMODE/A>B
h
VOL
k
g
j
REC
f
MP3 RECORDER/PLAY
P
F
o
VOCMP3
n
USB
m
q
TREBLE
O
E
N
DC IN
12-15 V 4 A
M
K
L
MUTE
C D
J
B
I
H
A
MIC AUX WR1/IR1 WR2/IR2 BASS
G
PASO Procast50®
Q
3A 250V
MIC
AUX
IR1/ WR1
IR2/ WR2
BASS
TREBLE
MIC IN
AUX IN
AUX OUT
WR1 CHANNEL SELECTOR
WR2 CHANNEL SELECTOR
DC INPUT
FUSE
VOICE PRIORITY
M
NOP
POWER SWITCH
BATTERY COMPARTMENT RELEASE BUTTON
Q
4
EXT SPKR
OPEN OPEN
ABCDEFG
EXTERNAL SPEAKER
HIJKL
Q
MIC IN AUX IN AUX OUT
RESET
POWER
MODE
STOP
REPEAT/EQ
DELETE
REC.
VOL
VOL
USB
Mp3
VOC
LCD Display
abcde
i
f
j
h
k
g
CF Card Slot
l
q
o
p
n
m
l
i
e
k
d
c
b
o
j
n
g h
f
m
q
p
a
P
F
TREBLE
E
DC IN
12-15 V 4 A
K
MUTE
C D
B
A
MIC AUX WR1/IR1 WR2/IR2 BASS
PASO Procast50®
Q
O
3A 250V
N
L
M
K
MIC
AUX
IR1/ WR1
IR2/ WR2
BASS
ABCDEFG
TREBLE
MIC IN
AUX IN
AUX OUT
HIJKL
WR1 CHANNEL SELECTOR
EXTERNAL SPEAKER
VOICE PRIORITY
WR2 CHANNEL SELECTOR
M
DC INPUT
FUSE
NOP
POWER SWITCH
BATTERY COMPARTMENT RELEASE BUTTON
Q
5
L
I
J
EXT SPKR
P
I
H
Q
G
MIC IN AUX IN AUX OUT
POWER
MODE
STOP
REPEAT/EQ
DELETE
REC.
RESET
abcde
VOL
VOL
USB
Mp3
VOC
LCD Display
i
f
j
h
k
g
CF Card Slot
l
q
o
p
n
m
UHF
24
®
PAGE INTENTIONALLY LEFT BLANK
PROFESSIONAL AUDIO & SOUND
23
Operating procedures
After unpacking the unit for the first time, please charge the unit for about 4 5 hours before any
operation. This is absolutely necessary as the built-in rechargeable battery might have been discharged
naturally due to long shipment and storage time, even though it has been fully charged in the factory
prior to shipment.
To charge the battery, just plug in the DC end of the switch mode power supply into the DC IN of the unit
and charging will start automatically. During the charging process, the charging indicator LED will flash
GREEN. When GREEN LED stays glow permanently, battery is then fully charged and normal operation
could now be started.
To operate this portable sound unit, switch on the main POWER switch, which will glow GREEN.
However, the main POWER switch does NOT switch on the IR or WR module and Tape / CD / MP3 player
as each of them has dedicated Power / Volume control switch indicated by IR1/WR1, IR2/WR2 and CD /
TAPE. MP3 has its own power switch on its panel. To operate each of them, you must switch them on
LED next to it will glow. Switch on the corresponding transmitter ( RF or IR type ). Rotate the volume
control knob clockwise and amplified sound could be heard if voice is spoken into the transmitter.
nd
To use the 2 wireless or IR microphone, switch on IR2 / WR2 power cum volume control switch and
repeat the same operation as above.
By default, when the system is equipped with one WR / IR receiver module only, it is always control via
IR1 / WR1 switch, IR2 / WR2 is then redundant.
To operate the UHF version, which comes with 16 preset frequencies, please ensure that the channel
HIGH POWER
LOW POWER
setting on the wireless microphone and WPCS50 receiver module are the same before operation. Then
perform the same procedure as above.
CH A (2.08MHz)
The above operation is only valid with WPCS50 version with built-in wireless receiver (WR) / IR
CH B(2.54 MHz)
module(s). Otherwise, the IR / WR controls are redundant.
MT:GainControl
st with
accordingly.
When the Charging / Battery Status Indicator glows RED, it means the built-in rechargeable battery is
weak and a recharge is necessary. While charging, the unit could also be operated simultaneously.
Operating the built-in Wireless ( WR ) / Infrared ( IR ) receiver modules
In the WPCS50 control panel, there are two designated power switch / volume control knob for the built-
in Wireless Receiver (WR) / Infrared (IR) receiver modules. They are indicated by IR1 / WR1 and IR2 /
WR2 .
To use the 1 wireless or IR microphone, switch on the IR1 / WR1 power volume control switch, Red
( Fig.2)
Mic clip
On/Offswitch
Battery compartment
1.Volume control2.3.4.5.6.7.
Compartment
6
®
Tie-Clip IR emitter (PIR33)
Charging contacts
5
6
Correct Ways of wearing the tie-clip type IR emitter
7
( Fig.1)
PROFESSIONAL AUDIO & SOUND
Bodypack IR Transmitter ( MIW333 )
4
MIW 333 uses 2 pieces of " AA" size batteries (Alkaline battery is recommended ).To install or
remove the batteries, press the release buttons at the edges of the transmitter to open or close
the cover as illustrated ( Fig.1). When installing the batteries with the cover open toward you,
the cover might block your hand. It is thus recommended that while inserting or removing the
batteries please hold the transmitter in such a way that the cover opens away from you. (
Antenna
Battery weak / audio mute indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Mini USB port
Cover release button
Charging contacts
Lavalier microphone
10
Mic clip
11
SETUPDOWN
13
12
14
12
13
Fig.2
14
7
BELT-PACK TRANSMITTER MW233 UHF
11
Fig.1
9
8
MW 233 uses 2 pieces of " AA" size batteries (Alkaline battery is recommended ).To install or remove
the batteries, press the release buttons at the edges of the transmitter to open or close the cover as
illustrated ( Fig.1 ). When installing the batteries with the cover open toward you, the cover might
block your hand. It is thus recommended that while inserting or removing the batteries please hold the
INSTALLATION OF BATTERIES
transmitter in such a way that the cover open away from you. ( Fig.2 )
22
®
PROFESSIONAL AUDIO & SOUND
Operating the dynamic wired microphone
There is a MIC IN jack with dedicated volume control for this portable sound unit. To use a cable
microphone ( dynamic only ), just plug in the end with a phone jack plug into MIC IN . Rotate the volume
control knob clockwise and amplified sound could be heard when voice is spoken into the cable
microphone.
This operation is valid for version of WPCS50 with built-in CD player.
Operation of system with CD player module.
To operate, turn on the CD / TAPE power cum volume control switch a little until LED next to it glow. The
LCD panel on the CD player will be lighted up and normal operation is ready. To insert a CD, just push it
into the CD slot and the mechanism will suck it in automatically.
Rotate the TAPE / CD volume control knob to adjust the volume of the CD player. For Bass and Treble
setting, adjust the TONE control. Clockwise from center line of the TONE control is to boost Treble and
counterclockwise direction from center line is to boost Bass.
Warning :
For more details, please refer to the explanation on CD controls and functions.
There are two versions of CD player in offer, namely the normal CD player and the second is the CD cum
MP3 player.
For the normal CD player, it only accepts commercially recorded CD with normal recording format. CD-
R, CD-RW and MP3 format which are recorded or downloaded from your computer will not be accepted
and the no CD or Read Error will be shown in LCD.
For CD cum MP3 player, it reads commercially recorded CD as well as CD recorded in MP3 format.
Operation of MP3 module.
For details, please refer to explanation of MP3 player controls and functions.
Simple Trouble-shooting :
No sound when one speaks to the wireless microphone
Please verifythe followings:
1.Main power switch ofthe system should be ON. When poweron LED not lighting up, it means that the
battery iseither weak or not charged. Please plugin theAC cable to Charge the battery. The rechargeable
battery hasa life span of about 2 years.If the batteries have reached their life expectancy, please change to
a freshpair.
2.The power switch ofthe corresponding receiver module should be putto ON. This is indicated by the lighted
power LED.When two wireless microphones are used, bothpower switches of the receiver modules must
be ON.
microphone operatingmanual ).
3.Wireless microphone should beswitched to ON and verify that thebattery is okay. ( pleaserefer to wireless
4.Please verify that thefrequency on the wireless microphone and the corresponding built-in wireless
receiver moduleare exactly the same frequency group andchannel.
5.Master volume control ofthe system should be turned on.
.
21
socket of the charger.
Operation:
1.connect the DC plug of the adapter to the DC
2.When charging , the indication lamp is (Red).
3.Press each charge/discharge button for
discharge (yellow)and press one more time
that will be back to charging (Red).
4.When fulls charge , Green LED and sounded.
5.When connect the charging plug to the ring
output socket of the charger, the right
charger's trough could be an external charge.
6.The full charge capacity is 700mAH.
1.Connect the Adapter to a wall outlet.
2.Insert infrared Wireless Microphone to charger.
charging. Charging time will be
3.The red LED of charger will light up during
approx. 3.5 hours.
4.When charging is completed, the green LED
indicator will turn on and red LED
turn off.
attached only. When other type
of battery is installed in microphone, you can not
charger the battery.
5.Rechargeable battery to be exactly same type as
8
®
DISCHARGE
PROFESSIONAL AUDIO & SOUND
Desktop BATTERY CHARGER ( HC-10 ) FOR IR
CHARGE INDICATOR LED
INDICATOR LED
RECHARGE ABLE
BATTERY
HC10 ADAPTOR
8V / 1500mA
HANDHELD MIC CHARGER (HC-20)
HC20 ADAPTOR
9V/700mA
INDICATOR LED
battery. Do not use any battery and battery charger other than specified.
NOTE: Be sure to use specified battery only. You can not charge other type of
socket of the charger.
Operation:
1.connect the DC plug of the adapter to the DC
2.When charging , the indication lamp is (Red).
3.Press each charge/discharge button for
discharge (yellow)and press one more time
that will be back to charging (Red).
4.When fulls charge , Green LED and sounded.
5.When connect the charging plug to the ring
output socket of the charger, the right
charger's trough could be an external charge.
6.The full charge capacity is 700mAH.
DISCHSRGE
INDICATOR LED
1.Connect the Adapter to a wall outlet.
2.Insert infrared Wireless Microphone to charger.
charging. Charging time will be
3.The red LED of charger will light up during
approx. 3.5 hours.
4.When charging is completed, the green LED
indicator will turn on and red LED
turn off.
attached only. When other type
of battery is installed in microphone, you can not
5.Rechargeable battery to be exactly same type as
charger the battery.
9
Desktop Belt Pack Transmitter Battery Charger ( HC-37 ) FOR IR and UHF
CHARGE INDICATOR LED
RECHARGE ABLE
BATTERY
HC20 ADAPTOR
9V/700mA
INDICATOR LED
battery. Do not use any battery and battery charger other than specified.
NOTE: Be sure to use specified battery only. You can not charge other type of
20
®
PAGE INTENTIONALLY LEFT BLANK
PROFESSIONAL AUDIO & SOUND
19
Operating the CD player
To begin operation, first switch on the CD Power switch , after switch on the main switch
When this key is pushed during CD stop, play will start after track search.
When this key is pushed during CD is playing, then it is changed to pause.
PLAY/PAUSE
SET
PWR
When this key is pushed during CD is pausing, then it is changed to play.
When CD is not stop, if this key is pushed then CD will stop.
Press the [skip] button to select the desired track.
When CD is playing , if this key is pushed then track is searched to forward
STOP
-SKIP-
SCAN/
REPEAT OFF ¡ REPEAT 1 TRACK ¡ REPEAT ALL TRACK
or backward .
If this key is pushed, [repeat] mode is changed cyclically shown below.
SEARCH
REPEAT
When this key is pushed, door is moved out -----moved in cyclically.
Set to programming mode.
EJECT
PROG
When programming mode, [stop] key is pushed then program is all cleared.
When this key is pushed during CD is playing, the time display will change
REMAIN (option)
to remain time of the whole CD.
When this key is pushed during CD is playing, the set will mute the output.
Push again, will recovery the output .
MUTE (option)
When this key is pushed, the set will play each track for ten second.
When this key is pushed, it will becomes random play mode.
INTRO (option)
RANDOM (option)
Power SW of the set .
When this key is pushed , the volume will decrease by 2dB per step , the min.
POWER (option)
VOL.- (option)
volume is 0dB.
When this key is pushed, the volume will increase by 2dB per step , the max.
volume is 80dB.
VOL.+ (option)
When this key is pushed , there are four second empty before each track.
When this key is pushed in any status, the set will play from the beginning.
When this key is pushed during play, the beginning is marked . push this key
one more time , the end is also marked , and the set will play from the
SPACE(option)
TOP(option)
A<->B
beginning to the end cyclically . push this key again will delete the function.
Rotate the volume control knob of the CD control panel to adjust the volume of the CD player. For Bass
and Treble setting , adjust TONE control.
Clockwise from center line is to boost Treble and counter-clockwise direction from center line is to boost
Bass.
This CD player does not accept CD-R and 8cm diameter CD. Either one will cause
malfunction to this CD player.
Caution:
10
MW226 (UHF)
®
PROFESSIONAL AUDIO & SOUND
MW226 microphone requires 2 pieces of " AA " size batteries to
operate. Please insert the batteries according to the correct
polarity asindicated.
Many batteries areknown tohave leakage problem ofconductive and corrosive liquid.Please observe therule to
remove the batteries iftheyare not tobe usedfora longer period.
Due to various unstandardized sizes ( diameters ) of "AA " batteries, this battery compartment is designed to
accommodate the most commom Alkaline batteriesonly.
5
13
11
Handheld IR Transmitter (MIW 335)
-
charging terminal( )
charging terminal(+)
3
2
4
enough
r to c
1
1.Grille cover
2.Low battery indicator
green LED shows the battery in full power.
red LED shows the battery is weak. Recharge the battery.
Slide to turn microphone on.
3.Power switch
Transmitting the infrared ray which carry voice.
4.Infrared emission source
distance is approx. 20M and at Hi position approx. 30M.
This switch changes transmitting power of infrared ray. At Lo position transmitting
5.Power Selector Switch (Lo/Hi)
If transmission system may pick up some noise at Lo position.
Factory setting is Lo position.
It means the transmitting distance may be insufficient. Set the switch to Hi position.
At Hi power operation, operating time is approx. 4 hours.
Turn the battery cove ounterclockwise and pull out.As shown in ( Fig.1 ).
Make sure the power switch is in the OFF position when replacing battery.
REPLACEMENT OF BATTERY
Make sure the battery polarity is correction when installation of new battery.
18
®
PAGE INTENTIONALLY LEFT BLANK
PROFESSIONAL AUDIO & SOUND
TREBLE
DC IN
12-15 V 4 A
MUTE
P
3A 250V
EXT SPKR
PASO Procast50®
4Ω
17
SPKR IN
PASS50 AUXILIARY SPEAKER SYSTEM CONNECTIVITY
MIC AUX WR1/IR1 WR2/IR2 BASS
PASO Procast50®
MIC IN AUX IN AUX OUT
Specification
8 MB~512MB compact flash card
MP3 encoder/decoder & ADPCM
Mp3:128 Khz, 80 Khz, 32 Khz
ADPCM: 8Khz
MP3, Voice, and USB cord attached
8~14 V DC/170mA
8charactersx2lines with backlight
Aluminum
CF/I card socket
MP3 encoder/decoder & ADPCM
20Hz~14 KHz
148.7mm , 43.7 , 130
390
12
®
Item
PROFESSIONAL AUDIO & SOUND
Expansible memory
Voice Recording Format
Resolution
Input cord
Work voltage
Display
Case
Memory Socket
Voice Recording Format
Frequency Range
Dimensions (W,H,D,mm)
Weight(Basic unit)(kg)
Operating the MP3 Player
Features:
Memory capacity: Build in 64MB
Record time: 68 minutes (128 KHz), 108 minutes (80 KHz), 272 minutes (32 KHz)
Analog recording terminals enable direct recording from a microphone or CD player.
Function: Repeat, EQ, mute, record,A->B, delete.
More than 1000K record cycles presents high reliability.
Specification
General information
The module adopts the compact flash memory card which has the highest "Value/Cost" in the world now. CF
card is generally available for digital camera and PC. The resolutions of the sound are 128 KHz, 80 KHz,
and 32KHz. MP3 record /player can record Mp3 files for approximately 68 minutes in resolution of 128 KHz
by built-in 64MB flash memory, or 108 minutes in 80 KHz, or 272minuntes in 32 KHz. The memory of CF
card ranged from 8MB to 512MB is applied to this system.
Start:
Please Press the "POWER" for 2 seconds to turn on the power.
There are three way to download MP3 files to this module. First way is to use the USB cable. You can insert
USB cable into USB connect for down/up load mp3 file. The second way is insert the CF Card. You can insert
Instruction
CF card into CF card slot to down load mp3 file. The third way is VOC input. You can plug 3.5mm mini plug
into VOC input in the panel. So, you can input sound sources from for CD player or tuner. (Fig A1)
If you didn't insert CF card, the module will play the music from build-in memory. It will show "MEM" (Fig A1)If
you insert the CF card , the module will choose the CF card first ant it will show "CF". (FigA2) Meanwhile, you
can also store audio files to build-in memory or CF card.
Stop mode:
You can select "VOC" mode which record for mat is ADPCM. This mode is for recording signals from 3.5mm
13
mini plug or microphone. You can select Mp3 mode which record format is MP3. You can press "MODE" to
select while in stop mode. (Fig A2, Fig A3)
As Fig A2, 01 00:04 means the total minutes of first song is four seconds in VOC mode.
As Fig A3, 01 03:06 means the total minutes of first song is three minutes six seconds in MP3 Mode.
CF: It means the Mp3 file is from CF card.
MEN: It means the Mp3 file is from built-in memory.
You can press " " to select next MP3 file or " " to select previous MP3 file in stop mode. Then you can
Press " " to play the selected MP3 files. (Please see Fig.A3)
Play Mode:
Please press" "to play next MP3 files or press and hold " " to for ward the playing MP3 files at 10
times speed. Press" "to play the previous MP3 files or press and hold " "to rewind the playing files at
10 times speed. You can adjust sound lever by press "VOL+"or "VOL" to increase or decrease the volume
output level. (Fig.A4)
Pause mode:
Press the" "to pause current file and press it again to release the pause mode. It will continue playing the
paused file. If you press"STOP", it will return to stop mode and will not play again file.(FigA5)
TREBLE
3A 250V
1) Procure an audio cable having a 1’4” Phono Plug attached
on one end and an RCA audio plug on the other.
2) Connect the cable to the AUX OUT of the WPCS50 and the
LOW LEVEL INPUT R Jack of the Subwoofer.
3) Adjust the SW150 GAIN and FREQ Controls to mid
position.
4) Turn Subwoofer to ON or to AUTO.
5) Turn the WPCS50 On and play a track on the CD Player (if
equipped).
6) Re-adjust the GAIN and FREQ Controls on the SW150 for
DC IN
12-15 V 4 A
VOICE PRIORITY
WPCS50 REAR PANEL
®
MIC AUX WR1/IR1 WR2/IR2 BASS
PASO Procast50®
EXT SPKR
TO AUX OUT
MIC IN AUX IN AUX OUT
the individual preference.
TO LOW LEVEL INPUT
®
R
OUTPUT
POWERED
LOW LEVEL
INPUT
R
NORM
PHASE
REV
SW150
OFF
)))))
AUTO
ON
paso
FREQ
PWR/PRT
GAIN
L
L
TO SPEAKERS
HI - LEVEL OUT
LR
R
40 HZ 180 HZ
FROM AMPLIFIER
HI - LEVEL IN
MAX
L
+ - - + + - - +
MIN
120 VAC
175 WATTS
60 HZ
RISK OF FIRE
REPLACE FUSE
AS MARKED
3 A 250 V
LINE FUSE
MOUNTING
NOT SUITABLE FOR IN WALL
E205870
S150PTH
16
PROFESSIONAL AUDIO & SOUND
SW150 POWERED SUB-WOOFER CONNECTIVITY
15
You can decide to save MP3 file saved in CF card or build- in memory by pressing " "button.(Fig D4,D5)
The please press "REC" again and start to record.
CF: It means Mp3 file will be saved in CF card
Men: It mean Mp3 file will saved in Built-in memory.
You can press "STOP" to cancel the record operation of the current MP3 file.
You can press MODE/A->B to set A->B mode while playing music. Press once to set start point (A), (Fig.E1)
A->B mode:
then press once to set end point(B).(Fig E2). Then press this button again to release this mode and the
module will continue to play music. This functions is designed for particularly language learning.
Delete Mode:
You can press the" "or " " to select the next or previous file to delete. Then press "DELETE" to delete
selected file. The LCD will appear "ERASED OK?" (Fig F1)You can press"DELETE" again to delete this file
or press "STOP" to cancel the delete operation and return to stop mode. (Fig F2)
If some errors happen, you can use a paper clip to inset the "RESET" hole to shut off the module, and then
press the "Power" to start the module again.
Shut Off:
You can press the "EJECT" button to remove the CF card from CF card Slot. Or plug out USB cable. Then
press the "POWER " for two second to shut off this module.
14
®
PROFESSIONAL AUDIO & SOUND
Record Mode:
Please press "Record" to set VOC or MP3. Please for 1 second for ADPCM format; It will show as "VOC".
Press for 3 second for MP3 format; It will show as "MP3". Please press "mode" to set the solutions of record.
Repeat/EQ mode:
Please press"REPEAT/EQ" once to set repeat mode. You can set no repeat, repeat1 or repeat all. (FigB1,
B2,B3)
Press "REPEAT/EQ" for two seconds to set EQ mode. You can set normal, pop, classic, rock, and jazz.(Fig
B4,B5,B6,B7,B8)
Please press"STOP' return to stop mode.
Mute Mode:
You can press "Power ON/OFF" to the Mute mode and this module will play music with lowest sound.
(Fig.C1)Then press the button again to release Mute mode. The sound will restore to the previous sound
level, and the figure in LCD display will indicate the sound level. (Please see Fig.C2)
There are 128 Kbps, 80 Kbps, 32 Kbps. (Fig D1, D2, D3 )
Loading...