.............................................................................................................................................3Usage and storage
.............................................................................................................................................7Recharging the battery
.............................................................................................................................................8Installing the battery
.............................................................................................................................................8Checking the battery charge of the iPhone
.............................................................................................................................................10Connecting the iPhone to the Wi-Fi network of the
AR.Drone
.............................................................................................................................................10Using the AR.Drone with several iPhones
.............................................................................................................................................11System LED
.............................................................................................................................................14Checking the IP address of the AR.Drone
.............................................................................................................................................15Forgetting the Wi-Fi network
.............................................................................................................................................16Erasing the pairing memory of the AR.Drone
.............................................................................................................................................16Restarting the AR.Drone
Free flight
Before you begin
Taking off
Piloting
Landing
Switching cameras
Status icons
Disconnections during the flight
.............................................................................................................................................17Positioning the iPhone
.............................................................................................................................................18Hand positions on the iPhone
.............................................................................................................................................18Colours of the LED lights
.............................................................................................................................................22Interrupting the application
Warning
Warranty
Changes to this User Guide
Disposal of this product at the end of its life
Declaration of Conformity
FCC Compliance Statement
Copyright
Registered trademarks
Safety instructions
Caution: Exposure to Radio Frequency Radiation
Important safety instructions
Read the following warning before you or your child play with the AR.Drone. Failing to do so may cause
injury.
Seizure warning
Some people (about 1 in 4000) may have seizures or blackouts triggered by light flashes or patterns,
such as while watching TV or playing video games, even if they have never had a seizure before;
Anyone who has had a seizure, loss of awareness, or other symptom linked to an epileptic condition
should consult a doctor before playing a video game.
Parents should watch when their children play video games. Stop playing and consult a doctor if you
or your child have any of the following symptoms: convulsions, eye or muscle twitching, loss of
awareness, altered vision, involuntary movements, disorientation.
To reduce the likehood of a seizure when playing video games:
- Sit or stand as far from the screen as possible.
- Play video games on the smallest available television screen.
- Do not play if you are tired or need to sleep.
- Play in a well-lit room (indoor) or area (outdoor).
- Take an 10 to 15 minute break every hour.
Repetitive motion injuries and eyestrain
Playing video games can make your muscles, joint, skin or eyes hurt after a few hours. Follow these
instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or eyestrain;
- avoid excessive play. It is recommended that parents monitor their children for appropriate
play ;
- take a 10 to 15 minute break every hour, even if you don’t think you need it ;
- if your hands, wrists, arms or eyes become tired or sore while playing, stop and rest them for
several hours before playing again ;
- if you continue to have some hands, wrists, arms or eyes during or after paly, stop playing and
see a doctor.
Health and safety precautions1
Magnets
Not suitable for children under the age of 14. This product contains small magnets. If swallowed, the
magnets may stick together in the intestines and cause serious injury. Consult a doctor immediately if the
magnets are swallowed.
Use and maintenance
AR.Drone is not suitable for use by children under 14 years of age.
To fly the AR.Drone indoors install the hull in order to protect the AR.Drone in case of collision
with any object.
You should keep the Parrot AR.Drone in sight at all times when operating it, in order, among
others, to avoid injuries or damages to people, animals or property.
The use of the AR.Drone is some public areas (for instance train stations, trains, airports,
aircrafts, etc.) may be prohibited. You should check whether the use of the Parrot AR.Drone is
permitted before using it in public areas or public transport.
Always use your Parrot AR.Drone bearing in mind other people’s privacy.
When rotating, the propellers of the Parrot AR.Drone could cause injury to people, animals and
property. You should not touch the Parrot AR.Drone when propellers are rotating and should wait
until the propellers have completely stopped before handling the Parrot AR.Drone.
You should ensure that no-one is standing nearer than 1 meter (1 yard) from the Parrot AR.Drone
when in operation and that at all times you keep a sufficient distance between the propellers and
any person, animal or property.
You must keep the Parrot AR.Drone away from high voltage power lines, trees, buildings and any
other potentially dangerous or hazardous areas.
The Parrot AR.Drone’s performance may be affected or significantly reduced and your Parrot AR.
Drone irreversibly damaged if:
you use the Parrot AR.Drone in unfavourable meteorological conditions (including but not limited to
rain, wind, snow, fog, etc) or if visual conditions are not sufficient (e.g. operation of the Parrot AR.
Drone by night);
- you use the Parrot AR.Drone in wet conditions (e.g. you should not land the Parrot AR.Drone on
water or on a wet surface);
- you allow sand or dust to penetrate the Parrot AR.Drone;
- you obstruct the engine’s air vents;
- you use spare parts and accessories other than those specified by Parrot, or
- you use the Parrot AR.Drone near strong magnetic fields, radio waves or areas with strong
radiations (this may prevent the camera of the Parrot AR.Drone from operating correctly). You
should also avoid using your Parrot AR.Drone in areas subject to Wi-Fi® networks (such as for
instance internet Wi-Fi routers or boxes etc.). This may create interferences that could reduce
the performance of the Parrot AR.Drone.
2Health and safety precautions
Warnings concerning the use of the battery
Lithium Polymer batteries are extremely hazardous and liable to cause serious injuries to persons or
property. The user accepts liability for the use of a Lithium Polymer battery. As the manufacturer and
the distributor cannot ensure the battery is used correctly (charging, discharging, storage, etc.), they
cannot be held liable for damages caused to persons or property.
In the event of battery leakage, avoid the liquid coming into contact with skin and eyes. In case of
contact with the skin, wash copiously with soap and water. In case of contact with the eyes, rinse
copiously with cold water and consult a doctor. If you notice a suspicious smell or noise or observe
smoke around the charger, disconnect it immediately.
Non-compliance with the instructions below could result in gas being given off, fire, electric shock or
an explosion.
Charging
The Parrot battery shall only be used together with the Parrot charger. Examine the charger regularly
for damage to the cord, plug, enclosure or other parts. Never use a damaged charger. Never charge
a swollen battery, a leaky battery or one which has been damaged. Do not use the AR.Drone charger
to charge any other battery than the provided rechargeable battery.
Do not overcharge the battery. When the battery is fully charged, disconnect it from the charger. Do
not put the device back in the charger once charging has finished. You risk causing overheating.
Do not charge the battery near inflammable materials or on an inflammable surface (carpet, wooden
flooring, wooden furniture, etc.) or conducting surface. Do not leave the battery unattended during
charging.
Never charge the device immediately after use while it is still hot. Let it cool down to room
temperature. Do not charge the battery while it is still connected to the AR.Drone.
Batteries are only to be charged under adult supervision.
Do not cover your product or its charger while the battery is charging.
Exhausted batteries are to be removed from the item. Rechargeable batteries are to be removed
from the item before being charged. Non-rechargeable batteries are not to be recharged.
Recharge the battery at a temperature of between 0°C and 40°C.
Usage and storage
Do not use the battery if the plastic cover has been torn or compromised in any way. Do not insert or
remove the battery while the power is on. Do not expose the battery to excessive physical shock.
Never use a swollen battery or a leaky battery, or one which is damaged or giving off a unusual
odour.
Keep the battery out of the reach of children.
Do not expose the battery to heat or dispose of a fire. Do not allow the battery to come into contact
with any kind of liquid. Do not leave your device out in the rain or near a source of moisture. Do not
Health and safety precautions3
put the battery in a microwave oven or in a pressurised container.
If you purchased a spare battery or if you are uncertain about its genuineness, make sure
your battery contains this label, with 2 codes (different on each battery): one 6 digit code
and one 10 digit code.
Do not attempt to dismantle, pierce, distort or cut the battery and do not attempt to repair the
battery. Do not place any heavy objects on the battery or charger. Avoid dropping the battery.
Do not clean the charger with a solvent, denatured alcohol or other inflammable solvents.
It is essential to avoid short circuits. Avoid direct contact with the electrolyte contained within the
battery. The electrolyte and electrolysis vapours are harmful to health.
Keep your device at ambient temperature. Do not expose your device to extreme temperatures. Do
not subject your device to large temperature variations. Do not place your product near a source of
heat.
Remove the battery when you are not using the device.
Disconnect the charger when you are not charging the battery.
Battery disposal
Discarding batteries in your general household waste can be harmful to the environment. Damaged or
unusable batteries must be disposed of in a container specially reserved for this purpose. When disposing
of the battery, follow appropriate local guidelines and regulations. For further information contact your local
solid waste authority.
Extra batteries – protection against counterfeiting
Using a counterfeit Lithium Polymer battery which does not meet the quality requirements defined by Parrot
can cause irreversible damages to the AR.Drone as well as serious injuries to persons or property.
Domestic animals
Avoid using the AR.Drone around domestic animals, particularly pet dogs. The AR.Drone incorporates an
ultrasound altimeter (emission frequency: 40kHz). Ultrasonic waves are known to disturb certain domestic
animals, most especially dogs. Using the AR.Drone in the company of a dog may lead to it behaving
erratically or perhaps even dangerously.
4Health and safety precautions
Before you begin
Note: The iPod touch, iPhone and iPad will collectively be referred to as an "iPhone" in this manual.
AR.Drone
Hull with guard rings
(for indoor use)
Hull without guard
rings
(for outdoor use)
Battery
Charger
Adaptors
Stickers
Contents of the packaging
Remove the protective adhesive covers from the AR.Drone, the camera and the 2 hulls.
Keep the provided stickers. You will need to stick them on the indoor hull at the locations indicated
with the small markings before playing the AR.FlyingAce multi-player game.
Before you begin5
Downloading the applications
AR.Free Flight
AR.Free Flight is the core application. It allows you to pilot the AR.Drone using your
iPhone.
It is designed to help you learn how to perform the basic flight movements (climbing,
descending, turning, reversing, advancing, etc.).
AR.FlyingAce
The AR.FlyingAce application brings you into a world of epic aerial dog-fights against
another AR.Drone on the same Wi-Fi network. This application will be made available
soon.
Login to the App Store and download the free applications for the AR.Drone.
6Before you begin
Getting Started
Warning: Do not insert the adaptor into the transformer by force.
Note: The charging time for the battery is 1 hour 30 minutes. The LED status light will turn green when
charging is complete.
Battery
Recharging the battery
1. Select the adapter corresponding to your country and place it on the transformer. It is essential that
you hear the sound that confirms a firm connection.
2. Connect the battery to the charger.
3. Connect the power cable to the transformer and then plug it into the mains power supply.
Getting Started7
Installing the battery
1. Insert the battery into the appropriate compartment.
2. Make sure that it is correctly secured by using the
attachment mechanism.
3. Connect it to the AR.Drone.
Checking the battery charge of the iPhone
In order to use the AR.Drone under optimal conditions, make sure that your iPhone's battery is fully
charged. A weak or medium battery charge can lead to poorer performance of the AR.Drone
(responsiveness to commands, quality of the video feed, etc.).
Indoor usage
Avoid flying the AR.Drone close to young children, domestic animals or fragile objects.
Install the hull with the guard rings in order to protect the AR.Drone if it collides with another object.
Place the AR.Drone in the middle of a room (4m x 4m minimum) without obstacles. Step back to a
distance of 1 metre behind the device (the front of the device is easy to identify because of the
camera).
In the Settings panel of the AR.Free Flight application, deactivate the Outdoor Shell and Outdoor
Flight options.
8Getting Started
Outdoor usage
Note: Keep in mind that the wind strength that you encounter where you are piloting the AR.Drone may
well be different from the wind strength where the AR.Drone is actually flying. This may explain any
unexpected changes in trajectory.
For improved ease of use, we recommend that you configure your
iPhone to run in flight mode. To do so, simply select Settings >
Airplane mode.
Do not use the AR.Drone in unfavourable meteorological conditions (rain, strong wind, snow) or if
visibility conditions are inadequate (at night).
Although the automatic pilot can compensate for some turbulence caused by wind, avoid flying the
AR.Drone in wind conditions of over 15 km/h.
Install the hull without the guard rings.
Set the AR.Drone on a flat dry surface in an area without any obstacles. Step back to a distance of 1
metre behind the device (the front of the device is easy to identify because of the camera).
In the Settings panel of the AR.Free Flight application, activate the Outdoor Shell and Outdoor
Flight options.
Connecting the iPhone to the AR.Drone
Activating airplane mode
Getting Started9
Connecting the iPhone to the Wi-Fi network of the AR.Drone
1. Connect the AR.Drone's battery. Wait until the system
LED is green.
2. On your iPhone, select Settings > Wi-Fi.
> The list of available Wi-Fi devices will be displayed.
3. Select ardrone_parrot.
Note: The name by which the AR.Drone is known by your iPhone
and other Wi-Fi devices can be modified. Please refer to the
section on Basic settings for more information.
4. Wait until the network name is checked.
> The Wi-Fi logo will appear on the iPhone screen.
Note: Once the connection between your iPhone and the AR.Drone has been established, the two devices
are automatically paired. Only the iPhone that you have used to make the connection can be used with
that AR.Drone.
To use the AR.Drone with another iPhone, please refer to the Erasing the memory of the AR.Drone
section.
Using the AR.Drone with several iPhones
If you wish to use your AR.Drone with another iPhone, you must erase the memory of the AR.Drone.
Please refer to the section on Erasing the memory of the AR.Drone for more information.
Meanings of the LED colours
The LED lights (light emitting diodes) are the little red or green lights on the device. There are 2 types of
LED on the AR.Drone:
- the 4 motor LEDs located close to the propellers
- the system LED located on the belly of the AR.Drone.
10Getting Started
Motor LEDs
LED behaviour
Meaning
The 4 LEDs are red
Power is connected
Each LED flashes red, one after the
other
The motors are starting up.
The 4 LEDS flash green
The AR.Drone is currently taking off or landing.
The 2 front LEDs are green
The 2 rear LEDs are red
The AR.Drone is currently flying. These colours make it easy for
you to distinguish the front and the rear of the AR.Drone (when at
a distance from the device).
The 4 LEDS flash red and green
The memory of the AR.Drone has just been erased by pressing
on the Unpair button.
Note: Avoid turning the AR.Drone upside down when you check the colour of the system LED. It is better
to simply raise it high enough to look underneath.
Button
Used for ...
Checking the modified settings
Resetting the initial central value to 0. Make sure that the AR.Drone is settled
on a flat surface before pressing this button.
Restoring the factory settings
System LED
Wait for 20 seconds after having connected the battery to the AR.Drone, then check the colour of the
system LED.
If the LED is green, you can take off.
If after 20 seconds the LED is either red or orange, disconnect then reconnect the battery.
Settings
Press on the icon to access the settings menu for the AR.Drone.
Getting Started11
Basic settings
Option
Used for ...
Selecting the player profile.
Depending on your skills with the AR.Drone, select either the
Beginner mode or Ace mode (experienced).
When using Beginner mode, you have a joystick and
the navigation button. 2 hands are necessary for
controlling the AR.Drone.
When using Ace mode, the joystick and navigation
button are combined together. You can control the AR.
Drone with just a single hand.
Select the colour of your enemies when you are playing the
AR.FlyingAce game.
Modify the name by which the AR.Drone will be known as by
your iPhone and other Wi-Fi peripherals.
Note: You must exit the application, restart the AR.Drone,
and re-establish the connection with the iPhone for the new
name to be taken into account.
Restricting the maximum altitude of the AR.Drone.
If the option is activated, the AR.Drone will not be able
to exceed an altitude of 3 metres.
If the option is deactivated, the AR.Drone will be able to
climb as high as your Wi-Fi signal strength allows.
When the AR.Drone is on the point of exceeding that
limit, it will automatically redescend to a height of about
6 metres.
Note: We recommend that you keep this option activated
when your make your first flights with the AR.Drone.
Select the hull currently installed on the AR.Drone. Activate this
option if you have installed the outdoor hull (without guard
rings) on the AR.Drone.
Select the type of flight that you wish to make with the AR.
Drone.
Activate this option if you wish to use the AR.Drone outdoors,
especially if there is any wind.
12Getting Started
Advanced settings
We recommend that you not modify these settings during your
first flights with the AR.Drone. Wait until you are sufficiently
experienced before you make piloting of the AR.Drone more
responsive.
Before starting to modify these settings, make sure you fully
understand the 3 types of movement described in the adjacent
diagrams: Pitch, Roll and Yaw.
Option
Used for ...
Defining the sensitivity of the iPhone accelerometer.
If this value is high, a large tilting of the iPhone will be
necessary to control the AR.Drone.
If this value is low, then only a slight tilting will be
necessary to control the AR.Drone.
Define the maximum tilting that the AR.Drone will assume
when moving forwards or backwards.
If this value is high, the pitch of the AR.Drone will be
larger.
If this value is low, the pitch of the AR.Drone will be
smaller.
Note: This setting influences the acceleration behaviour. If the
pitch is large, the AR.Drone will gain speed much faster.
Define the speed of rotation
of the AR.Drone.
Slide the cursor to the right
to increase this speed.
Getting Started13
Define the vertical climb and descend
speed of the AR.Drone. Slide the cursor
to the right to increase this speed.
Adjust the neutral command position for the AR.Drone.
Select the Auto option for this setting to be set
automatically.
Select the Manual option to modify this setting
manually.
- the higher the Trim Pitch value, the higher will
be the neutral position for pitch.
- the higher the Trim Roll value, the higher will
be the neutral position for roll.
In the event of problems
An IP address starting with 192.168.1.X should appear in the IP field.
If the IP address starts with 169, connection between the iPhone and the
AR.Drone will not be possible.
Problem
Corrective action
The iPhone and the AR.Drone are
too far apart
1. Move closer to the AR.Drone
2. Deactivate Wi-Fi mode.
3. Restart the AR.Drone.
4. Reconnect the iPhone with the AR.Drone.
Checking the IP address of the AR.Drone
Check the IP address of the AR.Drone after establishing the connection. To do so, simply select Settings
> Wi-Fi then press on the right arrow on the “AR.Drone” network line.
Such an incorrect IP address may be caused by 3 problems:
14Getting Started
The Wi-Fi signal is interrupted
1. Make sure you are not using the AR.Drone in an area
subject to many Wi-Fi networks (such as internet Wi-Fi
routers or boxes etc.). This may create interferences
that could reduce the performance of the AR.Drone.
2. Deactivate Wi-Fi mode.
3. Restart the AR.Drone.
4. Reconnect the iPhone with the AR.Drone.
The AR.Drone has already been
used with another iPhone
1. Erase the pairing memory of the AR.Drone.
2. Deactivate Wi-Fi mode.
3. Reconnect the iPhone with the AR.Drone.
The AR.Drone is already currently
connected to another iPhone
1. Deactivate Wi-Fi mode on the other connected iPhone.
2. Erase the pairing memory of the AR.Drone.
3. Connect the new iPhone to the AR.Drone.
Note: If you have several AR.Drones, think about changing the names by which they are recognised by
other Wi-Fi peripherals.
Forgetting the Wi-Fi network
Select the Wi-Fi network generated by the AR.Drone then press on Forget this network.
Getting Started15
Deactivating Wi-Fi mode
To restart the AR.Drone, just disconnect and
reconnect the battery.
Deactivate and then reactivate Wi-Fi on your iPhone.
Erasing the pairing memory of the AR.Drone
1. Press the Unpair button using a fine-tipped object. You should hear a little "click".
> The 4 LEDs located on the motors will flash alternately red and green.
2. On the 1st connected iPhone, turn the Wi-Fi off and back on.
> You can now connect the 2nd iPhone to the AR.Drone.
Restarting the AR.Drone
16Getting Started
Free flight
Warning: Make sure that you have securely connected the AR.Drone battery and that the motor LEDs are
green before connecting your iPhone to the Wi-Fi network of the AR.Drone and before starting a flight
application.
Beyond a certain threshold point (~90°
compared to horizontal), movements are not
recognised by the iPhone's accelerometer.
We recommend that the iPhone be held in a
position close to horizontal in order to avoid an
uncomfortable or ineffective position if you
should need to move the AR.Drone backwards
quickly.
The position of the iPhone at the moment when
you press on the left button is taken as its
reference position.
Run the AR.Free flight application to use the AR.Drone in free flight mode.
> The motor LEDs will flash red, one after the other.
> The video feed from the AR.Drone's forward-facing camera will appear on the screen of your iPhone.
Before you begin
Positioning the iPhone
Free flight17
Hand positions on the iPhone
The position of your hands on the iPhone may have an effect on the strength of the Wi-Fi signal.
Colours of the LED lights
Check the colour of the system LED located on the bottom side of the AR.Drone.
Settings
Press the button then:
a. Make sure that the AR.Drone is settled on a flat surface and press Flat trim.
b. Select the hull that is currently installed on the AR.Drone and then the type of flight that you
wish to make.
c. Press OK.
Taking off
Press the key.
The motors will start and the AR.Drone will automatically position itself at an altitude of between 50 cm and
1 m.
18Free flight
Piloting
Slide the joystick (bottom right) to the right / left to make the AR.Drone pivot to the right / left.
Slide the joystick (bottom right) up / down to make the AR.Drone climb / descend in increments of 10 cm.
Press and hold the joystick in the up / down position to make the AR.Drone continuously climb / descend.
Press and hold the bottom left button and tilt the iPhone to the right / left to move the AR.Drone to the right
/ left.
Free flight19
Press and hold the bottom left button and tilt the iPhone forwards / backwards to move the AR.Drone
forwards / backwards.
Landing
Make sure that the AR.Drone is directly above a flat, dry and unobstructed surface and then press on the
button .
Switching cameras
Press the button to switch between the front camera and vertical camera.
20Free flight
Status icons
Note: Until such time as you accept or refuse an incoming phone call, the AR.Drone will remain blocked
on its last command.
The icon indicates the Wi-Fi signal strength between the AR.Drone and the iPhone. The number of bars
displayed is proportional to the signal strength.
The icon indicates the remaining battery charge of the AR.Drone.
Disconnections during the flight
Distance
If the distance between the AR.Drone and the iPhone becomes too large (approximately over 50 metres,
depending on the Wi-Fi environment), then the two devices may disconnect from each other. If this
happens, do not close the application on the iPhone but move closer to the AR.Drone.
If the AR.Drone finds itself at an altitude greater than 6 m when it disconnects, the automatic pilot will
reposition the AR.Drone at an altitude lower than 6 m.
Battery
The battery charge indicator on the iPhone screen indicates the remaining charge on the AR.Drone
battery. The indicator will display red when the battery is weak. Battery life is around 12 minutes.
When the battery charge is too weak, you are invited to land the AR.Drone. If you do not, the AR.Drone
will land itself automatically. In order to avoid inadvertent contact of the AR.Drone with any person,
domestic animal or other object, we recommend that you manually land the AR.Drone as soon as the
battery charge indicates a low level of charge.
Phone calls / SMS
If you receive a phone call or an SMS while you are using the AR.Drone, the AR.Drone will automatically
land.
- If you accept the phone call or open the SMS, the flight application will close.
- If you refuse the call or do not open the SMS, you may continue using the AR.Drone.
Calendar events
Check the calendar on the iPhone before using the AR.Drone. If you receive a reminder about an event
programmed on your iPhone calendar while you are piloting the AR.Drone, then the AR.Drone will
automatically land.
Free flight21
Interrupting the application
Warning: Only press on the Emergency button in a genuine emergency. The motors will immediately cut
out and the AR.Drone will fall from whatever height it is currently at. In most scenarios, simply landing the
AR.Drone is enough to resolve any problems.
If you press on the Home button of the iPhone while piloting the AR.Drone, it will stabilise itself. Restart the
application to take back control over the AR.Drone.
In the event of problems
The Emergency button
In the event of any problems while piloting the AR.Drone, just press the Emergency button.
The Reset button
A message on the iPhone may indicate that it is necessary to re-initialise the AR.Drone. In this case, press
the Reset button.
22Free flight
General information
Warning
You should use the Parrot AR.Drone safely and responsibly at all times, so as to avoid any damage or
harm being caused to any person, animal or property next to which you are flying the Parrot AR.Drone. In
this respect you should ensure that you always operate the Parrot AR.Drone in compliance with this Quick
Start Guide and our Safe Use of the Parrot AR.Drone instructions. Parrot also reminds you that you should
not use the Parrot AR.Drone for any unauthorised or unlawful purposes, as you will otherwise be fully liable
for any loss or damage caused as a result of such unauthorised use.
In particular, you should comply with any applicable data protection laws and refrain from operating the
Parrot AR.Drone in any way that could interfere with any other person’s privacy.
PARROT shall not be responsible for any consequences arising from the use of the product or the use of
this guide, nor shall Parrot be responsible for any damage or accidental loss of data resulting directly or
indirectly from the use of the product or the information contained in this guide.
Warranty
Without prejudice to any applicable statutory warranty, Parrot warrants that the Parrot AR.Drone will be free
from defects in material and workmanship for a period of 12-months from the initial date of purchase
(excluding consumables which are warranted during 6 months from the initial date of purchase) upon
presentation of proof of purchase to the retailer or to Parrot (including the date and place of purchase,
product serial number). Return to retailer is not applicable in the USA - return shall be made to Parrot.
During the contractual warranty period, any defective product should be returned in its original packaging to
the retailer’s or Parrot’s after-sales service. After inspection of the product, Parrot will, at its sole discretion,
either repair or replace the defective part or product, excluding any other indemnification of any nature.
Parrot’s warranty does not cover:
- defects due to damage caused by an accidental collision or fall;
- defects due to abnormal use of the product or if spare parts have been installed without
following the recommendations and instructions provided by Parrot in this guide or on www.
parrot.com or if the Parrot AR.Drone has been customised by the end-user;
- defects caused by repairs carried out by the end-user or an unauthorised third party, except
spare parts provided by PARROT;
- defects due to the use of spare parts not provided by PARROT in the original packaging.
- the use of spare parts not approved by Parrot, in particular, the use of batteries not approved
by Parrot (genuine Parrot batteries can be identified by their hologram);
- defects caused by any reason other than a defect in material or workmanship
- the gradual power loss of the Parrot rechargeable battery (086x) over time, which does not
constitute as a defect in material or workmanship,
If upon technical tests being carried out any product is found non defective (in particular an analysis of the
flight data from the last 30 seconds of flight - results available upon request) we reserve the right to return
such product to the sender at the sender’s cost and to levy a charge to cover Parrot’s technical test fees.
General information23
Upon expiration of the 12-month warranty period or if the defect is not covered by the warranty, any
defective product can be returned to Parrot’s after-sales service (see www.parrot.com for instructions) in
order to be repaired or for a defective part to be replaced at the sender’s costs. Repair will be carried out
only after acceptance of the corresponding quotation.
Except in relation to consumables, spare parts are subject to a 12 month warranty and are subject to the
same terms and conditions as those described above.
The warranty does not cover: damage to non Parrot products, including devices used to operate the AR.
Drone.
Changes to this User Guide
The explanations and specifications in this guide are given for information only and may be modified at any
time without prior notice. The latest version of this Quick Start Guide will however be available from our
website at www.parrot.com. The explanations and specifications contained in this guide are deemed to be
correct at the time of printing.
Although the utmost care has been taken when writing this guide, in order to provide you with information
which is as accurate as possible. Parrot shall not be held responsible for any consequences resulting
directly or indirectly from the use of the information herein.
Parrot reserves the right to amend or improve the product design or user guide without any restrictions and
without any obligation to notify users. As part of our ongoing objective to upgrade and improve our
products, the product that you have purchased may therefore differ slightly from the model described in
this guide.
Disposal of this product at the end of its life
At the end of this product’s life, please do not dispose of this product in your general household waste.
Instead, in order to prevent possible harm to the environment or human health from uncontrolled waste
disposal, please dispose of this product separately in accordance with your local laws and regulation. For
more information on the separate collection systems for waste electrical and electronic equipment that are
available for consumers, near your home, free of charge, please contact your local municipality authority.
You can also contact the retailer from which you purchased your Parrot AR.Drone – he might have put in
place recycling services or he may be part of a specific recycling scheme.
This product will be then treated in an environmentally sound manner at a licensed recycling plant and its
components will be recovered, recycled or reused in the most efficient manner, in compliance with the
requirements of the Directive on Waste Electrical and Electronic Equipment (2002/96/EC) of 27 January
2003 (as subsequently amended or replaced).
Declaration of Conformity
Parrot SA, 174 quai de Jemmapes, 75010 Paris, France, declare under their sole responsibility that the product
described in this user guide complies with technical standards EN 301489-17, EN300328, EN71-1, EN71-2,
EN71-3, EN62115 following the provision of the Radio Equipment, Telecommunication Equipment directive
(1999/5/EC R&TTE), and of the General Safety directive (2001/95/EC).
24General information
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This equipment may not cause harmful interference.
This equipment must accept any interference received, including interference that may cause undesired
operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this
device.
Parrot and the Parrot logo are registered trademarks of PARROT SA ; AR.Drone is a trademark of Parrot SA;
iPhone ® is a trademark of Apple Inc, registered in the USA and in other countries.
The Wi-Fi Alliance Member Logo is a logo of the Wi-Fi Alliance. Wi-Fi ® is a registered trademark of the WiFi Alliance.
All other trademarks mentioned in this guide are protected and are the property of their respective owners.
Safety instructions
CAUTION: To reduce the risk of fire, do not expose this device to rain or dampness.
1. Read these instructions.
2. Keep these instructions.
3. Pay attention to all warnings.
4. Follow all instructions.
General information25
5. Do not install the device near a source of heat. Radiators, ovens or other devices (including amplifiers)
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
An equilateral triangle, is intended to alert the user to the presence of uninsulated «dangerous
voltage» within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
which produce heat.
6. Do not change the polarised connectors.
7. Only use attachments/accessories specified by the manufacturer.
Warning
Read the entire instruction sheet included with this battery. Failure to follow all instructions could cause
permanent damage to the battery and its surroundings, and cause bodily harm.
NEVER use anything EXCEPT a LiPo approved charger.
ALWAYS use a LiPo cell balancing charger or a LiPo cell balancer.
NEVER charge through the discharge lead.
NEVER trickle charge, or allow to discharge below 2.5V per cell.
NEVER allow the battery temperature to exceed 140°F (60°C).
NEVER disassemble or modify pack wiring in any way or puncture cells.
NEVER place on combustible materials or leave unattended during charge.
ALWAYS charge in a fireproof location.
ALWAYS set charger’s output volts to match battery volts.
ALWAYS KEEP OUT OF REACH OF CHILDREN.
IMPROPER BATTERY USE MAY RESULT IN A FIRE, EXPLOSION OR OTHER HAZARD.
Caution: Exposure to Radio Frequency
Radiation
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does
not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.
Important safety instructions
1. This apparatus shall not be exposed to dripping or splashing and no object filled with liquid, such as
vases, shall be placed on the apparatus.
2. The AC/DC adaptor which provides disconnection from mains supply shall remain readily operable.
Unplug this apparatus when unused for long periods of time.
3. Read these instructions.
4. Keep these instructions.
5. Heed all warnings.
6. Follow all instructions.
7. Do not use this apparatus near water.
8. Clean only with dry cloth.
9. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
10. Do not install near any heat as radiators. Heat registers, stoves or other apparatus (including amplifiers)
that produce heat.
11. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
26General information
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects
filled with liquids, such as vases, should not be placed on this apparatus.. This apparatus is designed for
indoor use only.
Do not expose the frame to outside temperatures
below 5°C or above 40°C. The system could be damaged or the cabinet warped. Avoid
placing the system near a source of heat or
exposing it to sunlight (even through a window).
Similarly, excessively low temperatures and humidity could damage the device.
General information27
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.