Parkside KH 3053 SOLDERING GUN, PLP 100 Operation And Safety Notes
PLP 100
SOLDERING GUN
Operation and Safety Notes
6
GB / IE / CY Operation and Safety Notes Page 5
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions
of the device.
1 2
3
4
5
6
10
7
8
9
5 GB/IE/CY
Introduction .....................................................................Page 6
Proper use ..............................................................................Page 7
Description of parts and features .........................................Page 8
Included items ........................................................................Page 8
Technical data ........................................................................Page 8
Safety advice
1. Workplace safety ..............................................................Page 9
2.
Electrical safety .................................................................Page 10
3. Personal safety ..................................................................Page 11
4. Careful handling and use of electrical power tools .......Page 12
Original accessories / attachments ......................................Page 13
Use
Switching on and off .............................................................Page 13
Replacing a soldering tip ......................................................Page 14
Maintenance and cleaning ................................. Page 14
Service centre ................................................................Page 14
Warranty ...........................................................................Page 15
Disposal ............................................................................... Page 16
Declaration of conformity / Producer ........Page 16
Table of contents
6 GB/IE/CY
Introduction
The following pictograms are used in these operating
instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock! Danger to life!
Risk of explosion!
Risk of fire!
Warning - Hot surfaces!
V
~
Volt (AC)
W
Watts (Effective power)
Wear a breathing / dust mask, protective glasses,
gloves and clothing.
Keep children away from electrical devices!
For indoor use only!
Check that the device, mains lead and plug are in
good condition!
Do not smoke!
7 GB/IE/CY
Introduction
Do not eat!
Do not drink!
Dispose packaging and appliance in an
environmentally-friendly way!
Soldering gun PLP 100
Introduction
Please make sure you familiarise yourself fully with the way
the device works before you use it for the first time and that
you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes
and if necessary pass them on to a third party.
Proper use
The device is intended for soldering tasks in a DIY environment. Soft
soldering takes place at temperatures below 450 C°. Suitable solders
have typical melting temperatures around 200 C°. Use the device only
as described and for the indicated purposes. The device is not intended for commercial use. Any other use or modification to the device shall
be considered as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for loss or damage
arising from improper use.
Loading...