PARADIGM Décor 1C (до 74 дюймов), Décor 1SC (до 74 дюймов), Décor 2SC (90-130 дюймов), Décor 2S (90-130 дюймов), Décor 1SC (90-130 дюймов) paradigm-decor-custom-collection-spec-sheet-online.pdf
...
Pa
Shown: Décor 2S / 1C
Custom-length speakers fit any television,
turn any installation into a custom home theater,
and deliver Paradigm high-performance sound.
Customers want a balanced, well-designed home theater
installation. For some, traditional soundbars are too short,
or too long. Or look cobbled-together or mismatched.
Paradigm has the solution, with high-performance, low-profile
speakers that are Custom Crafted in Canada to match the size
of any wall-mounted flat-panel television.
Features Include:
• Rigid, resonance-free enclosures
are constructed of anodized
extruded aluminum with
heavy-duty MDF baffles.
• Enclosures hang just 2-inches
off wall (with grille), making
Décor Custom Collection
speakers one of the thinnest highperformance speakers available.
• Handmade grilles are handstretched with acoustically
transparent cloth, and can be
customized with an optional TV
contour cut-out.
• Three mounting bracket options
to choose from.
082517
Shown: Décor 2SC
2.06”
Only
2.06” Deep
Paradigm Décor Custom Collection loudspeakers
are available in an array of driver formats, with up
to three audio channels in a single enclosure. Use
one, or combine them, to build a slim, stylish high
performance audio system that’s tailored to the
TV Contour Issue
Some TVs have IR sensors, cameras,
or logos at the bottom edge of the
TV, preventing speakers from
mounting perfectly flush.
TV Contour Matching (Optional)
Paradigm can customize the grille to
compensate for this “bump out” which
allows for a perfectly flush aesthetic
when installed next to the TV.
length and height of absolutely any television.
Innovative Technology:
• S-PAL™ Satin-Anodized Pure-Aluminum Dome Tweeters with
™
exclusive Perforated Phase-Aligning (PPA
protects the delicate pure-aluminum tweeter dome and acts as a
Phase Plug, boosting output and blocking out-of-phase frequencies
for smoother, extended high frequency response with incredible detail.
• High-Performance Anodized Unibody Bass/Midrange Cones with
durable Nitrile-Butadiene Rubber Surrounds.
• Integrated Wire Management Channel eliminates wire pinching and
allows the speaker to sit nearly flush against the wall.
• Audiophile-Quality Recessed Terminal Connections provide secure,
flush-fitting wire connections.
• Specially Designed Driver Motor Structures, featuring 1.5” high-temp
voice coils and super-efficient shallow-depth extruded aluminum heatsinks, for a long life of high-performance in the thinnest possible space.
) Tweeter Lens, that
Paradigm Décor Custom Collection Models
Soundbar (Flush horizontal speakers)
Décor 1C
Center
Left / Right (Flush vertical speakers)
Décor 2S
Stereo
Décor 1S
Stereo
Décor 2SC
Stereo + Center
Décor 1SC
Stereo + Center
Left / Center / Right (Flush horizontal and vertical speakers)
Décor 2S / 1C
Stereo + Center
Specifications
Décor 1C Décor 1S Décor 1SC Décor 2S Décor 2SC
Design
Crossover
Application Center (Soundbar) Stereo (Soundbar)
High Frequency
Driver
Midrange / Bass
Low Frequency
Extension*
Frequency
Response
(On-Axis)
Frequency
Response
(30 Degrees
O-Axis)
Sensitivity —
Room
Sensitivity —
Anechoic
Maximum
Input Power
Impedance
Suitable Amp
Power Range
Cabinet Extruded aluminum Extruded aluminum Extruded aluminum Extruded aluminum Extruded aluminum
Bae
Grille
Warranty
‡
§
3-driver; acoustic
suspension
2nd-order electro-
acoustic at 2.6kHz
One 1" (25mm)
S-PAL™ dome,
ferro-fluid damped /
cooled, Perforated
Phase-Aligning
(PPA™) Tweeter Lens
Two 4.5” (114mm)
anodized aluminum
unibody cones, 1.5”
high-temp voice coils
80 Hz (DIN) 80 Hz (DIN) 80 Hz (DIN) 80 Hz (DIN) 80 Hz (DIN)
±3 dB from
140 – 21kHz
O-Axis:
±3 dB from
140 – 17kHz
92 dB 92 dB 92 dB 92 dB 92 dB
89 dB 89 dB 89 dB 89 dB 89 dB
70 Watts 70 Watts 70 Watts 70 Watts 70 Watts
Compatible with
8 ohms
15 – 130 Watts 15 – 130 Watts 15 – 130 Watts 15 – 130 Watts 15 – 130 Watts
Machined MDF —
vinyl wrapped
Machined MDF; cloth
wrapped; magnetic
5 years 5 years 5 years 5 years 5 years
6-driver; acoustic
suspension
2nd-order electro-
acoustic at 2.6kHz
Two 1” (25mm)
S-PAL™ dome,
ferro-fluid damped /
cooled, Perforated
Phase-Aligning
(PPA™) Tweeter Lens
Four 4.5” (114mm)
anodized aluminum
unibody cones, 1.5”
high-temp voice coils
±3 dB from
140 – 21kHz
O-Axis:
±3 dB from
140 – 17kHz
Compatible with
8 ohms
Machined MDF —
vinyl wrapped
Machined MDF; cloth
wrapped; magnetic
9-driver; acoustic
suspension
2nd-order electro-
acoustic at 2.6kHz
Stereo + Center
(Soundbar)
Three 1” (25mm)
S-PAL™ dome,
ferro-fluid damped /
cooled, Perforated
Phase-Aligning
(PPA™) Tweeter Lens
Six 4.5” (114mm)
anodized aluminum
unibody cones, 1.5”
high-temp voice coil
±3 dB from
140 – 21kHz
O-Axis:
±3 dB from
140 – 17kHz
Compatible with
8 ohms
Machined MDF —
vinyl wrapped
Machined MDF; cloth
wrapped; magnetic
6-driver; acoustic
suspension
2nd-order electro-
acoustic at 2.6kHz
Stereo (Left/Right)
Two 1” (25mm)
S-PAL™ dome,
ferro-fluid damped /
cooled, Perforated
Phase-Aligning
(PPA™) Tweeter Lens
Four 4.5” (114mm)
anodized aluminum
unibody cones, 1.5”
high-temp voice coils
±3 dB from
140 – 21kHz
O-Axis:
±3 dB from
140 – 17kHz
Compatible with
8 ohms
Machined MDF —
vinyl wrapped
Machined MDF; cloth
wrapped; magnetic
10-driver; acoustic
suspension
2nd-order electroacoustic at 2.6kHz
Stereo + Center
(Left/Right)
Four 1” (25mm)
S-PAL™ dome,
ferro-fluid damped /
cooled, Perforated
Phase-Aligning
(PPA™) Tweeter Lens
Six 4.5” (114mm)
anodized aluminum
unibody cones, 1.5”
high-temp voice coils
±3 dB from
140 – 21kHz
O-Axis:
±3 dB from
140 – 17kHz
†
†
Compatible with
8 ohms
Machined MDF —
vinyl wrapped
Machined MDF; cloth
wrapped; magnetic
* DIN 45 500. Indicates -3 dB in a typical listening room. † With both center channels in parallel. ‡ With typical program source provided the amplifier clips no
more than 10% of the time. § Custom orders begin production immediately after payment is received or credit is granted, and are built to your submitted
specifications. Product cannot be returned due to inaccurate measurements being submitted.
To learn more and order, visit:
Copyright © Paradigm Electronics Inc. All rights reserved. We reserve the right to
change specifications and/or features without notice as design improvements are
incorporated. www.paradigm.com.
02-01-18
design.paradigm.com
Loading...