ParaBody 880, 881 User Manual

881 LEG PRESS ADAPTER KIT

FOR 880 GYM SYSTEM

WARNING:

Read and follow all directions for each step to insure proper assembly of this product.

CLASS H PART # 7168701 REV . C

USER’S GUIDE

Version: 881102 Revision: 3/08/02

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Parts list..........................4

Assembly Instructions.....5-26

Insert-Registration Card

IMPORTANT SAFETY INFORMATION

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions on the use of this machine. Use only for intended exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.

6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized ParaBody dealer.

7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.

8. Make sure all spring loaded pull pins are fully engaged in the adjustment position and fully tighten thumbscrew before use.

5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized ParaBody dealer.

9. Children must not be allowed near this machine. Supervise teenagers.

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

IMPORTANT NOTES

Please note:

* Thank you for purchasing the ParaBody 881 LEG PRESS ADAPTER KIT. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated.

T ools Required for Assembly

* 9/16” wrench * Ratchet with 9/16” socket and 6” Ratchet extension * Adjustable wrench * T ape measure

Bolt Length Ruler

NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH

BOL T LENGTH RULER:

1/2 1/2 1/2 1/2 1/2 1/2

345

PARTS LIST

1 2 3 4 5 6 7 8 9

PART #

7160008 7156001 7156102 3116201 3102501 3102802 3102924 3102922 3102905 3102935

DESCRIPTION

LEG PRESS ADAPTER

SHORT LEG PRESS CABLE

LONG LEG PRESS CABLE

3-1/2” PULLEY

3/8” WASHER

3/8” LOCKNUT 3/8 X 1-3/4” BOLT 3/8 X 2-3/4” BOLT 3/8 X 3-3/4” BOLT 3/8 X 4-1/2” BOLT

NOTE: The LEG PRESS ATTACHMENT (100102) must be assembled before

connecting it to the PARABODY 880 GYM SYSTEM

QTY

1 1 1 9 7 8 4 2 3 5

KEY

11 12 13 14 15 16 17 18 19

PART #

6533501 3102807 6122701 6480301 7242408 7245008 6995708 3102904 3102955

DESCRIPTION

CABLE CLIP

3/8” LOW HEIGHT LOCK NUT

3/8 X 1” SPACER

3/8” FLANGE SP ACER

PULLEY BRACKET

PULLEY L-BRACKET

PULLEY PLATE

3/8 X 3”BOLT

3/8” X 4-1/4” BOLT

QTY

2 6 6

1 1 1 2 2

KEY

• NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM without SECOND ST ACK OPTION , please refer to PAGE 5.

• NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM with SECOND ST ACK OPTION , please r efer to PAGE 18.

• NOTE: It is recommeded that the SECOND STACK OPTION is assembled before the LEG PRESS OPTION.

3/8”

LOCK

NUT

3/8 X 1”

3/8 X 3-3/4”

BOL T

SP ACER

THREADED

HOUSING

FIGURE 1

STEP 1:

• NOTE: Follow these steps if assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM without SECOND STACK OPTION, otherwise if the SECOND STACK OPTION is assembled please refer to PAGE 18.

• REMOVE the LAT CABLE, THREADED HOUSING, 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from

the 880 GYM SYSTEM. See FIGURE 1. Save the LAT CABLE if you ever plan to purchase the SECOND ST ACK OPTION. Discard the 3/8 X 1” SPACERS. (NOTE: Remove pulleys for ease of removal.)

1/2 1/2 1/2 1/2 1/2 1/2

345

PEC ST A TION P AD

3/8 X 2-3/4”

3/8” WASHER

FRAME

FIGURE 2

STEP 2:

• Remove the PEC STATION PAD from the FRAME, then discard the two 3/8 X 2-3/4” BOLTS. See FIGURE 2.

PEC ST A TION P AD

18 3/8 X 3”

FRAME

FIGURE 3

STEP 3:

• SECURELY assemble the PULLEY BRACKET (15) and the PEC ST ATION PAD to the FRAME using two 3/8 X 3” BOL TS (18). See

FIGURE 3.

1/2 1/2 1/2 1/2 1/2 1/2

345

REAR UPRIGHT

3/8 X 4” BOLTS

FIGURE 4

STEP 4:

• Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in

FIGURE 4. Discard the 3/8 X 4” BOLTS.

FIGURE 5

19 3/8 X 4-1/4”

STEP 5:

• SECURELY assemble the PULLEY L-BRACKET (16) to the REAR UPRIGHT using two 3/8 X 4-1/4” BOLTS (19), four

previously removed 3/8” WASHERS and two previously removed 3/8” LOCK NUTS as shown in FIGURE 5.

REAR UPRIGHT

BOOM

BRACKET

FRAME

FIGURE 6

STEP 6:

• Route the SHORT LEG CABLE (2) through the FRAME and BOOM BRACKET as shown in FIGURE 4. (NOTE: Remove pulleys for ease of installation.)

1/2 1/2 1/2 1/2 1/2 1/2

345

+ 18 hidden pages