Pandigital PANSCN08 Quick Start Manual
Quick Start Guide
Handheld Wand Scanner
PANSCN08
Package contents:
Handheld Wand Scanner Calibration Sheet USB Power Adapter USB Cable
Cleaning Cloth microSD card Storage pouch
Quick Start Guide User Guide PageManager Software (on microSD card)
Insert and Charge the battery
1
Before the first time use, make sure the battery
is installed as shown.
Charge the battery until the red LED turns green.
Connect to computer or Connect to USB Power Adapter
Insert microSD card
2
Insert an unlocked (writable) microSD card into
the memory card slot.
Calibrate the scanner
3
a. Lay the calibration sheet on a flat surface, printed side up.
b. Place the scanner on the white area of the calibration sheet.
c. Press and hold both the Scan and PDF JPG buttons for 3
seconds to turn on and enter the calibration mode.
d. When C01 appears on the LCD and the red LED flashes, slide the
scanner down across the white area of the calibration sheet.
e. When the first scan is finished, C02 appears on the LCD.
f. Slide the scanner back up over the white area.
g. When the calibration is complete, 777/888 appears on the LCD,
and then the scanner automatically turns o.
h. Carefully place the calibration sheet back into the plastic sleeve and store until next use.
Turn scanner on
4
Press and hold the Scan button for 2 seconds.
Wait until both green and red LEDs turn o.
Customer Support: http://www.pandigital.net/support
Continued
Quick Start Guide
Choose Scan settings
5
a. Press STD HQ to choose desired resolution
b. Press Color BW to choose document color (Color=color, BW=grayscale)
c. Press PDF JPEG to choose your desired file format.
Scan your document
6
a. Be sure a microSD card is inserted into the scanner.
b. Place document on flat surface. If book, hold firmly with one hand.
c. Hold scanner in your hand, press Scan
d. Place the scanner horizontally on document, lining up the
start-scanning position marked on the sides of the scanner with
the left edge of your document.
e. Hold the scanner and glide it gently over the surface of the page.
f. To obtain an optimal scanned image, keep your speed at SP0.
g. After scanning, press the Scan button. If the page scanned
successfully, 001 appears on the LCD.
(STD=300dpi, HQ=600 dpi)
(SP0 appears on the LCD).
Page Two
View or Download scanned images
7
A. Remove microSD from scanner and insert into card reader connected to your computer
OR
B. Connect the scanner to your computer via USB cable.
Computer System Requirements
Operating system: Windows XP Pro SP3+, Windows Vista, Windows 7
Mac 10.5 or later (Intel based) (Mac can only be used for USB file transfer)
USB Port: USB 2.0 or USB 1.1
After Successful Connection
An additional drive is titled Removable Disk [drive leer] or the personalized title you may
have previously assigned to your memory card.
File Naming Convention
Your scanned images are stored in a folder on your microSD card:
JPG files are stored in a sub folder titled DCIM/100PHOTO
PDF files are stored in a sub folder titled DCIM/200DOC
Each scanned image is given a file name with the prefix PDI_ followed by a 4-digit
sequential number in the order the images are stored, i.e., PDI_0001.jpg, PDI_0002.jpg, etc.
Turn scanner o
8
Press & hold the Scan button for 3 seconds.
The scanner automatically turns o if left idle for 3 minutes.
Customer Support: http://www.pandigital.net/support
QSG-E_PANSCN08_v1.0_01-11
Loading...