Pandigital PANSCN04 Quick Start Manual
Scanner Quick Start Guide
Stand-Alone Scanning (scan to memory card)
1
Scanner
Wall outlet
Plug in
2 3
Insert memory card Power on
(press for 2 seconds)
4
It is recommended to use
the plasc sheath for old
photos or for those that
may be slightly curled
Connect to PC (access scanned images on memory card)
1 2 3
Scanner
OR
PC
5
Align photo at le edge
and then insert photo
gently into feed slot
4
6
Wait for
blinking to stop
before inserng
another photo
Indicator light will
flash as scan is
processed
a. Insert memory card
b. Power on
NOTE:
To avoid changing Windows Explorer sengs on your PC,
scan all photos before connecng USB cable to PC to complete transfer.
Connect USB cable Windows Vista
Select “Always do
this...” and “Open
folder to view files”
Windows XP
Select “Open folder
to view files...”
Scan To PC Manager Software (scan directly to PC)
System
requirements:
Windows XP,
Vista, Windows 7
32-Bit
(Scan To PC is not
supported on
Macintosh)
10MB free
hard disk space
Log in as
Administrator
QSG-E-PANSCN04_v1.0_07-09
1 2 3
Scanner
PC
a. Insert Pandigital
SD card (included)
b. Power on
Connect USB cable
A Windows Explorer
window will open
In Windows Explorer,
locate Pandigital/
Ulity/ScanToPC_xxxx
folder, and then doubleclick the Setup.exe file.
In the Windows Explorer
window, double-click on
the drive associated with
the scanner (i.e., PDSCAN),
and Photo1 folder which
contains the scanned images.
4
Scan To PC Manager
window opens.
Select Scan To PC,
set locaon to save
scanned images,
and then click Apply.
5
Scan your photos.
The scanned images
will be saved in
Photo1 folder on
the SD card.
NOTE: Complete User Guide is on the SD card
Located in the Documentaon folder
CUSTOMER SUPPORT - Check our website,
http://www.pandigital.net/support,
for Customer Support telephone number
Loading...