Pandigital DPF56-2, DPF701, DPF80-2, DPF90-2, DPF92-2 Quick Start Manual

Pandigital Quick Start Guide

Initial Setup

1

Remove the plastic insert
before using the Remote
Control.

2 3 4

Plug the power adapter
into a wall outlet and DPF.

Extend the stand on the
back of the frame to the
desired viewing angle.

Power ON the DPF
(switch is on the side
of DPF).

View Slideshow from your Memory Source

1

2 3 4

5

A slideshow will begin
displaying the photos
stored in the DPF’s
internal memory.

5

Insert your memory
card or USB Flash Drive
into the appropriate
media slot on the side
of the DPF.

A slideshow will begin
displaying the photos
stored on your memory
source.

To select a different memory
source, press EXIT until the
HOME screen is displayed,
and then press SETUP.

Access HOME Screen

1 2 3

Power ON the DPF. The slideshow will

automatically begin
displaying the photos
stored on the selected
memory source.

Use arrows to highlight
Select Media, and then
press ENTER.

Press the EXIT button
on the remote control
or DPF top-back panel
until the HOME screen
is displayed.

Use arrows to highlight
the desired memory source,
(i.e., Internal Memory), and
then press ENTER.

Note: Sources not present
in DPF will not be available
for selection.

Updated documentation is available on our website: http://www.pandigital.net

CUSTOMER SUPPORT

Call us toll free: 1-800-715-5354

Pandigital Quick Start Guide

Copy Images from Memory Card into Internal Memory

1

Power OFF the DPF. Insert your memory card

2

into the appropriate media
slot on the side of the DPF.

3 4

Power ON the DPF. Press EXIT until the

5 6 7 8

Use arrows to highlight
PHOTOS, and then
press ENTER. The photo
thumbnails screen is
displayed.

Press SETUP; use the
arrows to highlight
Copy Photo, and then
press ENTER.

Use arrows to highlight
ALL, press ENTER, and
then select Yes to confirm
the copy request.

HOME screen is
displayed.

Press EXIT to return
to the HOME screen.

Copy Images from Computer into Internal Memory

1 2 3 4

Example

Power ON the DPF. Connect the USB cable

to the DPF (small end)
and your PC (large end).

6

Example

7

Safely Remove Hardware

When the PC recognizes
the DPF, a pop-up
window opens; select

‘Open folder to view
files’ and click OK.

8

Safely Remove USB Mass
Storage Device - Drive (F:)

Example

A window opens with all
drives connected to your
PC listed. Locate the
drive titled ‘PANDIGITAL’.

9

5

Example

Locate the folder
containing your photo
files you want to copy
into the DPF.

Select, then drag and
drop the file(s) into the
‘PANDIGITAL’ drive.

To safely disconnect the
USB cable, click the
hardware removal icon
in your task bar.

Click the ‘Safely remove

USB Mass Storage device’

message associated
with the ‘Pandigital’ drive.

When prompted,
disconnect the USB
cable from the DPF
and PC.

PanQSG_1108