For assistance, please visit http://www.panasonic.com/phonehelp
4
Introduction
For assistance, please visit http://www.panasonic.com/phonehelp
5
Preparation
For best performance
Location
This unit communicates using radio
waves.
For maximum distance and noisefree operation, we recommend the
following:
L�Placing the product away from
electrical appliances.
L�Raising the antenna vertically.
Environment
L�Keep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
L�The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
L�The product should not be exposed
to direct sunlight.
L�Do not place heavy objects on top
of the product.
L�When you leave the product unused
for a long period of time, disconnect
the product from the computer.
L�The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not
be placed in rooms where the
temperature is less than 5 °C
(41 °F) or greater than 40 °C
(104 °F). Damp basements should
also be avoided.
L�The maximum data transferring
distance may be shortened when
the product is used in the following
places: Near obstacles such as
hills, tunnels, underground, near
metal objects such as wire fences,
etc.
L�Operating near 5.8 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
Connections
L�Connect the USB adaptor to a USB
port on your computer. For optimum
performance, do not connect more
than one USB adaptor to a single
computer or the USB adaptor to
your computer via a hub.
L�The USB adaptor may not turn
off and may consume electricity
regardless of whether your
computer is turned off or in sleep
mode. By connecting/disconnecting
the USB adaptor from an active
computer, the USB adaptor will turn
on/off. We recommend when you
are not using the USB adaptor or
computer, that you disconnect the
USB adaptor from your computer.
Routine care
L�Wipe the outer surface of the
product with a soft moist cloth. Do
not use benzine, thinner, or any
abrasive powder.
Controls
A
B
C
A Antenna
B Status indicator
C USB plug
Status indicator
The status indicator indicates the USB adaptor status.
Indicator Status
Light on Adaptor is on. (Receiving power)
Light off Adaptor is off. (Not receiving power)
Flashing
Transmission between the adaptor and base unit is not established.
Symbols and screen shots used in these
operating instructions
Symbols used for operations
Symbol Meaning
Example: “Contacts
”
Press {^} or {V} to select the words in quotations
shown on the display.
Example: {MENU} The words in the brackets indicate button names
including soft key names on your handset and base
unit.
Example: [OK] The words in the brackets indicate button names on
your computer.
i
Proceed to the next operation.