
Installation Manual
Expandable Digital Cordless Handset
Model No.
Thank you for purchasing a Panasonic cordless telephone.
This handset is an accessory handset for use with Panasonic base units
KX-TG1032/KX-TG1033/KX-TG1034. You must register this handset
with your base unit before it can be used.
This installation manual describes only the steps needed to register and
begin using the handset. Please read the base unit’s operating
instructions for further details.
Charge the batteries for 7 hours before initial use.
Please read this Installation Manual before using the unit and save for
future reference.
For assistance, visit our website:
http://www.panasonic.com/help for customers in the U.S.A. or Puerto
Rico.
KX-TGA101
PQQX15792ZA FC0107FF0

Accessory information
Included accessories
Accessory item Order number Quantity
Charger PQLV30053ZS 1
AC adaptor for charger PQLV209V 1
Battery HHR-55AAABU 2
Handset cover
*1 The handset cover comes attached to the handset.
Sales and support information
LTo order replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-1277.
*1
PQYNTG1032SR 1
Setting up the handset
Connecting the charger
(120 V AC, 60 Hz)
Note:
LUse only the included Panasonic AC adaptor PQLV209.
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become disconnected.
2 For assistance, please visit http://www.panasonic.com/help
Bottom of the charger
Hooks
Hooks
Fasten the AC adaptor cord to
prevent it from being disconnected.

Battery installation
1 Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
2 Insert the batteries negative (T)
terminal first. Close the handset
cover.
Important:
LUse only Ni-MH batteries AAA (R03)
size.
LDo not use alkaline/manganize/Ni-Cd
batteries.
LInstall the batteries in proper order
(S, T), matching the correct polarity .
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the charger for 7
hours before initial use.
Charge
contacts
Note:
LIf you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
LTo ensure that the batteries charge
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Panasonic battery performance
Operation Operating time
While in use
(talking)
While not in use
(standby)
Note:
LThe handset can be left on the
charger without any ill effect on the
batteries.
LThe battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the charger and let charge
for 7 hours.
Up to 17 hours
Up to 7.5 days
For assistance, please visit http://www.panasonic.com/help 3

Registration
Register the handset to a KX-TG1032/
KX-TG1033/KX-TG1034 base unit.
1 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
LAfter the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
2 Handset:
Press {OK}, then wait until a beep
sounds.
Changing the display
language
{MENU}
1
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Display settings” i
{OK}
4 {V}/{^}: “Change language” i
{OK}
5 {V}/{^}: Select the desire d setting.
6 {OK} i {OFF}
Headset (optional)
Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using a
Panasonic KX-TCA60/KX-TCA86/KXTCA88HA/KX-TCA92/KX-TCA93/KXTCA94/KX-TCA95 headset. See 2 for
ordering information.
LHeadset shown is KX-TCA86.
4 For assistance, please visit http://www.panasonic.com/help