Panasonic WZ-AESAD User Manual

Panasonic

Dual AES/EBU Output Card

Instructions

Model No. WZ-AESAD

u

Dual AES Output Card WZ*AESAD

1

iSC'l ;o'-‘ f

- AES€BS DIGITAL OUTPUT

Before attempitng to connect or ooeraie this product,

please read these instructions carefully and save this manual for future use

-----------------

••

D

Introduction

The WZ-AKSAD is an option card to be installed in the AD Converter WZ-AD
96 and WZ-AD96M.

This card supplies an 8-channet, 24 bit, 96 kHz signal to the connected
MTRs.

Warning!
The installation shown below should be made by qualified ser

vice personnel or system installers.

Installation

1. Plug off the power cord of the converter from an AC outlet.

2. Losen four screws as illustrated, then remove the
standard ARS/RBU output block from the rear par
of the AD Converter,

3. Place the option card into the opening, then push it
to the end.

4, Fasten the four screws to fix the option card.

Pin Assignment

AES B Hot
AES7'£oid

AES 6 Hoi
GNC

AES A Hot

^?Fip~

AES 3 Cold

AESg-HgL

GNp " “ .
AES 1 Cold
Not used

AES 8 Cold
AES 7 Hot
GND
AES 6 Cold

AES 4 Cold
AES 3 Hot
GND
AES 2 Cold
AES 1 Hot
GND

Recommended Cable

Panasonic part # DA/DB-XLRM (DB-25 to 8 Male XLR,Length 3m), AD
Output cable is recomended.

Specifications

Output Connector

Format
Signal Level
Channel Mode

Dimensions

DB25

A1:S/EBU (24 bit AES3-1992)

RS-422
8 ch, 24-bit, 44.1/48 kHz, Normal AES
8 ch, 24-bit, 88.2/96 kHz, Hi-Speed AES

8 ch, 24-bit, 88.2/96 kHz, Dual AES

108(W)x37(H)x62(D) mm

4-l/4(W) X l-7/l6(H) X 2-7/l6(D) inch

Weight

230 g (0.51 lbs)

Panasonic Broadcast & Television Systems Company

Professional Audio Division

3330 Cahuenga Boulevard. Los Angeles, CA 90068 Telephone [phone]

avM 1299-0 YWA8QA5357AN

Printed in Japan

© Matsushita Communication Industrial Co., Ltd. 1999