Panasonic WX-SA250P, WX-ST200P, WX-ST400P, WX-SR202P, WX-SZ200P Instruction Manual
Specifications
June 2019
WX-SA250P
Wireless
Power source
Antenna field selection
Display (indicator)
Operating ambient temperature
Dimensions
Weight
Finish
Installation
Waterproof performance
Frequency used
Antenna
Connector
Compatible cables
Power source
WX-SR202P
Power source
Power consumption
Channel output
Audio input
Mixing output
Antenna
connection
Indicator (display)
Operating ambient temperature
Finish
Dimensions
Weight
No. of circuits
Connector
Output characteristics
S/N
Frequency response
Distortion
Connector
Input characteristics
Frequency response
Distortion
Connector
Output
characteristics
S/N
Frequency response
Distortion
No. of connectors
Connector
Compatible cables
Wiring distance
Common
Per channel
1920 MHz to 1930 MHz
Internal antenna
RJ45
CAT5 / CAT5e / CAT6 straight cable
Receiver WX-SR202P
Three-step switching (set at receiver (WX-SR202P),
operation support software of PC connected
to receiver
Power
-10 °C to +50 °C (14 °F to +122 °F)
Approx. 185 mm (W) × 160 mm (H) ×32 mm (D)
{7-9/32 inches (W), 6-19/64 inches (H), 1-17/64 inches (D)}
Approx. 400 g {0.88 lbs}
Sail white (color approximate to Munsell N9.3)
Ceiling, Wall, Microphone stand
IPX4 equivalent
AC120 V 60 Hz
39 W
2
Euroblock
-10 dBV balanced 600 Ω
70 dB or greater
50 Hz to 15 kHz
3% or less
Euroblock
-10 dBV balanced 600 Ω
50 Hz to 15 kHz
3% or less
Euroblock
-10 dBV
balanced 600 Ω
64 dB or greater
50 Hz to 15 kHz
3 % or less
8
RJ45
CAT5 / CAT5e / CAT6 straight cable
Up to 200 m{656 feet}
Power, Antenna 1 to 8, Sync, Main,
Remote
RF level (5-level display), Audio level/mute,
Microphone battery, Register
0 °C to 45 °C (32 °F to +113 °F)
Black coating (approximate to Munsell N1)
420 mm(W), 44 mm(H), 250 mm(D)
{16-17/32 inches (W), 1-47/64 inches (H),
9-27/32 inches (D)}
(excluding rubber feet, levers, etc.)
Approx. 2.8 kg {6.17 lbs}
WX-ST200P
Wireless
Microphone used
Frequency response
Low cut filter
Device
interface
Batteries type
Battery runtime
In continuous use at 25 °C(77 °F)
Using Panasonic batteries
Display (indicator)
Operating ambient temperature
Dimensions
Weight
Finish
Frequency used
Antenna
Connector terminal
for external input
WX-ST400P
Wireless
Microphone used
Frequency response
Device
interface
Batteries type
Battery runtime
In continuous use at 25 °C(77 °F)
Using Panasonic batteries
Display (indicator)
Operating ambient temperature
Dimensions
Weight
Finish
Frequency used
Antenna
Connector terminal
for microphone input
Connector terminal
for external input
Main unit
Microphone part
Main unit
Microphone part
1920 MHz to 1930 MHz
Internal antenna
Unidirectional electret condenser microphone
100 Hz to 15 kHz
200 Hz, 6 dB/oct
Three-contact 3.5 mm jack (Monaural mixing)
(1) Stereo L
(2) Stereo R
(3) GND
Rechargeable: AA Ni-MH battery x 1
Dry cell: AA alkaline battery x 1
Approx. 8 hours
(
AA Ni-MH battery BK-3MCCA)
Approx. 6 hours
(AA alkaline battery LR6PA)
Power, Charge
5 °C to 35 °C (41°F to +95 °F)
Maximum diameter ø48 mm, Length 222 mm
{ø1-57/64 inches, 8-47/64 inches}
Approx. 180 g {0.40 lbs} (including battery)
Black coating (approximate to Munsell N1)
1920 MHz to 1930 MHz
Internal antenna
Unidirectional electret condenser microphone
100 Hz to 15 kHz
Two-contact 2.5 mm jack
(1) Signal (Bias DC 2.5 V)
(2) GND
Three-contact 3.5 mm jack (Monaural mixing)
(1) Stereo L
(2) Stereo R
(3) GND
Rechargeable: AA Ni-MH battery x 1
Dry cell: AA alkaline battery x 1
Approx. 8 hours
(
AA Ni-MH battery BK-3MCCA)
Approx. 6 hours
(AA alkaline battery LR6PA)
Power, Charge
5 °C to 35 °C (41 °F to +95 °F)
60 mm(W)× 97 mm(H) × 20 mm(D)
{2-23/64 inches (W), 3-13/16 inches (H), 25/32 inches (D)}
Maximum diameter 13 mm{33/64 inches},
Length 22 mm{55/64 inches},
Cable length between microphone and
main unit 1000 mm{3 feet 3-3/8 inches}
Approx. 95 g {0.21 lbs} (including battery)
Approx. 20 g {0.04 lbs}
Black coating (approximate to Munsell N1)
1.9GHz digital wireless
microphone system
Clear and uninterrupted sound
Stable digital communications with high sound quality
Perfect for school Auditoriums and lecture halls, company conference rooms, etc.
Trademarks and registered trademarks
– All other trademarks identified herein are the property of their respective owners.
Important
– Safety Precaution : Carefully read the Important Information, Installation Guide and
operating instructions before using this product.
– Panasonic cannot be responsible for the performance of the network and/or
other manufacturers' products used on the network.
• Masses and dimensions are approximate. • Specifications are subject to change without notice.
DISTRIBUTED BY :
WX-SZ200P
Power source
Power consumption
Number of charge ports
Charging time
Indicator (display)
Operating ambient temperature
Dimensions
Weight
Finish
Main unit
AC adaptor
Main unit
AC adaptor
Main unit
AC 120 V 60 Hz
(AC adaptor for accessories (DC12 V) used)
Up to 5 W
2
Approx. 6 hours (at ambient temperature of 25 °C(77 °F),
using AA Ni-MH battery BK-3MCCA)
Power, Charging error (per charge port)
5 °C to 35 °C (41 °F to +95 °F)
200 mm(W), 90 mm(H), 106 mm(D)
{7-7/8 inches (W), 3-35/64 inches (H), 4-11/64 inches (D)}
(excluding protrusions)
110.5 mm(W), 32.2 mm(H), 52.5 mm(D)
{4-11/32 inches (W), 1-17/64 inches (H), 2-1/16 inches (D)}
(excluding DC cable and power cord)
Approx. 450 g {0.99lbs}
(excluding AC adaptor and power cord)
Approx. 166 g {0.37 lbs}
(excluding power cord)
Black coating (approximate to Munsell N1)
This series has the system expandability to handle spaces from small to large with high sound
quality, and connection of up to 8 antennas.
PRODUCTS LINE UP
These new products further strengthen Panasonic’s product line for commercial-use sound systems,
thereby enabling us to support the increasingly diversified range of customer requirements.
Key characteristics
1. Clear sound achieved with a wide frequency band and noise suppression technology
• Using high-compression-ratio voice codec, this system achieves
a wide frequency band of 100 Hz to 15 kHz.
Newly developed noise suppression technology makes clear voice
reproduction possible.
In addition, the WX-ST200P wireless microphone has an internal
low cut filter switch so it is possible to enhance speech sound clarity
by attenuating low frequencies.
800 MHz band analog
wireless
1.9 GHz band digital
WX-SR200 Series
Normal-conversation voices
5 kHz
10 kHz
15 kHz 100 Hz
2. Large spaces handled with connection of up to 8 antennas
• The inclusion of a handover function*1 as a wireless microphone conforming to the 1.9 GHz band DECT*2 standard
means it is possible to expand the communication area by installing multiple wireless antennas.
Up to 8 antennas can be connected, giving this system the expandability to support not only small spaces but also
large spaces such as gymnasiums and auditoriums.
3. High level of privacy and confidentiality secured with pairing registration
• For wireless receivers and microphones, pairing registration can be easily done with just button operations on the
devices being paired. Since transmissions are only possible between pair-registered wireless receivers and microphones,
there are no worries of inter-system interference and eavesdropping, unlike 800 MHz band analog communication systems.
Microphone
Hand-held Type
WX-ST200P
< 1 AA battery included >
<Microphone adaptor included>
<4 colored microphone rings included>
• External input function
(connection to PC, music player, etc.)
• Operation time approx. 8 hours with
AA Ni-MH battery BK-3MCC or
AA alkaline battery LR6NJ and approx.
6 hours with AA alkaline battery LR6XJ
• Includes microphone rings in 4 colors
Microphone
Lavalier Type
WX-ST400P
< 1 AA battery included >
• External input function (connection to PC, music player, etc.)
• Operation time approx. 8 hours with
AA Ni-MH battery BK-3MCC or
AA alkaline battery LR6NJ and approx.
6 hours with AA alkaline battery LR6XJ
Receiver
WX-SR202P
< Rack mount fittings included >
• 2-channel tuner as standard equipment
• Can connect up to 8 WX-SA250P units
Antenna
WX-SA250P
• Diversity reception system
• Ceiling/wall installation.
Can also be mounted on microphone stand
(mounting screws PF1/2 or W3/8).
• IPX4 (JIS C 0920 conformity/splash-proof type)
4. Stable operation realized with a diverse range of functions.
• Stable communication achieved with an automatic interference avoidance function and diversity reception
*2
∙ DECT
an automatic interference avoidance function that continuously monitors channel usage status and selects safe channels.
∙ The wireless antenna (WX-SA250P) performs diversity reception with multiple internal antennas. In addition,
when multiple wireless antennas are installed, sound with good reception status is selected by the handover
function
from the position in which the microphone is held.
• Battery trouble avoided through the use of size AA batteries and wireless charging
∙ For the microphone battery, a commercially available size AA nickel-hydrogen battery
charging can be done with the rechargeable battery still in the microphone.
In addition, a size AA alkaline battery (1 battery) can also be used so you have an emergency backup if you forget
to recharge.
∙ The recharger is the wireless (non-contact) type so you get reliable operation without contact problems caused by dust,
chalk powder, soiling, etc.
*1: The act of switching transmission antennas while moving.
*2: DECT : The acronym for Digital Enhanced Cordless Telecommunications.
*3: Recommend battery: Panasonic size AA nickel-hydrogen battery (Eneloop) product number BK-3MCC.
conformity has made public address amplification without interference possible through the use of
*1
. There are also two antennas installed in the microphone so stable transmissions are possible without impact
*3
(1 battery) can be used and
*IPX4: Resistant to water splashes from any direction.
Charger
WX-SZ200P
• WX-ST200P and WX-ST400P dedicated charger
• Non-contact type
• Charges 2 microphones simultaneously
• Full charge in approx. 6 hours
(when using AA Ni-MH battery BK-3MCC)
Loading...