![](/html/d7/d748/d7482e90ffec132d157fe94fdd9d946cc61a952d76465106ba5ab2c4ba8e23d9/bg1.png)
Ideal for classrooms,
lecture rooms,
and conference rooms!
Infrared Wireless
Powered Speaker Kit
Infrared Wireless Powered Speaker
WX-LP100
Infrared Wireless Microphone
(Pendant Type) WX-LT310
Infrared Wireless Microphone
(Hand Held Type) WX-LT100
All-in-one portable speaker instantly creates
an environment where everyone can concentrate
The Panasonic WX-LP100 Infrared Wireless Powered Speaker incorporates 2ch infrared receiver, infrared sensor,
amplifier and speaker in its compact unit. With high quality sound and versatile multimedia capability,
the WX-LP100 changes teaching, learning and presenting environment all at once. It is an advanced educational
and business tool made possible by Panasonic’s world renowned audio technology.
Plug and Play
Plug in the WX-LP100 to power
Infrared Wireless Powered
Speaker Kit with versatile
multimedia capability.
2 microphones and 2 multimedia
inputs can be used at a time.
With an external input terminal,
the microphone can transmit
an audio signal from any
multimedia source to the
WX-LP100. (The microphone cannot be
used when connected to an external input.)
Benefits
School • Improves classroom management
Laptop
CD
Player
MP3 Player
Laptop CD Player MP3 Player
• Increases students’ interest and zeal
• Helps students achieve better results
• Reduces stress on small voice students
and on whom trying to hear them
Easy to carry
With compact, lightweight and rugged
design, the WX-LP100 can be placed
wherever you like.
Easy to use
The power ON/OFF and 4 volume
controls including 2 microphones and
2 multimedia inputs can easily be made
on the front panel.
Plus, the pendant type microphone
WX-LT310 is equipped with volume
control buttons for own/other
microphone and any multimedia source.
Business • High privacy by infrared wireless technology
to prevent interception
•
Increases concentration and reduces voice fatigue
• Providing both hands free is so convenient
• No need for costly mounting or installation
![](/html/d7/d748/d7482e90ffec132d157fe94fdd9d946cc61a952d76465106ba5ab2c4ba8e23d9/bg2.png)
Key Features (WX-LP100)
• Integrated dual channel infrared wireless receiver
• 2 audio multimedia inputs
•
Remote control of wireless microphones and multimedia sources
• Wide horizontal dispersion for even coverage
•
Compact, lightweight and rugged design for flexible placement
• Interference/interception-free made possible by infrared
wireless technology
• Front panel controls for easy access
• Adjustable output for recording
• Adjustable output for assistive listening devices
Specifications (WX-LP100)
Amplifier/Receiver Unit
Power Source 24 V DC (Using the attached AC adaptor unit)
Power Consumption 450 mA
Infrared Sensor Input 75 Ω F type connector (with Sensor WX-LS100)
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Receiving System TRF (Tuned Radio Frequency)
Squelch Level 24 dBµV (including Sensor)
Tone Squelch Frequency 32.768 kHz
Line Input 1, 2
Line Output 0 dBV, unbalanced, ø3.5 mini jack
Volume Control* changeable microphone volume by the 2 dB step
Speaker Type 12 cm Full Range Bass Reflex
Rated Output 6.3 W (4 Ω), Max: 10 W (4 Ω)
SPL 93 dB SPL, 1 m, 1 W
Distortion Less than 1 %
Frequency Response 100 Hz ~ 15 kHz (Line input ~ Speaker output)
Operating Temperature +5 °C ~ +35 °C
Dimensions 187 (W) x 309 mm (H) x 209 mm (D)
Weight approx. 3.7 kg
Finish AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT310
Infrared Sensor (attached)
Power Source 22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption 20 mA
Infrared Ray Wavelength 850 nm
Sensor Output 75 Ω F type connector
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Dimensions Max. ø113.5 mm x 34.5 mm (H)
Weight approx. 0.2 kg
Finish Black color / Infrared ray transmission acrylic resin
-
12 dBV, unbalanced, ø3.5 mini jack
(L and R mixing for stereo input)
(Monaural audio output for L and R)
-
16 dB) (Reset by power OFF/ON)
(+6 dB ~
(excluding a projection for F type connector)
Part Names and Functions (WX-LP100)
Front Panel
OPERATE
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control
Rear Panel
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
Appearance (WX-LP100)
20965244
187
Unit: mm
Infrared Wireless Powered Speaker Kit Optional Accessory
Infrared Wireless
Powered Speaker
WX-LP100
All-in one portable speaker
incorporating 2ch receiver,
sensor, amplifier and speaker.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
Infrared Wireless Microphone
(Pendant Type)
WX-LT310
Hands-free pendant-style.
Equipped with volume
control buttons. Ideal for
teachers’ or presenters’ use.
* Shipped with
strap attached.
Infrared Wireless Microphone
(Hand Held Type)
WX-LT100
Light weight, simple and
basic design.
Ideal for students’
or audiences’ use.
Battery Charger
WX-LZ110
Direct connection.
Allows simultaneous charging
of two microphones.
Can also serve as power cord
for the charger stand.
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Charger Stand
WX-LZ10
Can charge batteries in approx.
seven hours. Two microphones
can be charged at the same time.
* Comes with two
WX-LT100 adaptors.
Photo shows adaptor
attached on left side.
Microphones;
option
DISTRIBUTED BY:
http://panasonic.net/pss/irw/
Printed in Japan (1N-790)