Page 1
Operating Instructions
Extension Software
Model No. WV-XAE100W
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Page 2
CONTENTS
Preface ....................................................................................................................................................................3
Features...............................................................................................................................................................3
About the user manuals ...................................................................................................................................... 3
System requirements ..........................................................................................................................................3
Trademarks and registered trademarks ..............................................................................................................3
Abbreviations ......................................................................................................................................................3
Before using this product ........................................................................................................................................ 4
Operations flow ....................................................................................................................................................... 5
How to obtain and register the Registration Key ....................................................................................................6
How to obtain and register the Registration Key ................................................................................................6
About the Vehicle Incident Detection function ........................................................................................................9
About setup page of the Vehicle Incident Detection function when vehicle detection is activated .................... 9
Enable the Vehicle Incident Detection function [Alarm].....................................................................................10
Configure the Vehicle Incident Detection function [Vehicle Incident Detection] ...............................................11
2 3
Page 3
Preface
The Extension Software WV-XAE100W (hereinafter, this product) is designed to enhance the usefulness of
optional network cameras. After registering the software, it is possible to use the Vehicle Incident Detection
function.
Important:
• Refer to the following URL for details.
http://security.panasonic.com/kms/
Features
Vehicle Incident Detection function: A function to detect vehicle stop or reverse travel can be added.
About the user manuals
This PDF manual contains how to register this product in network cameras, how to configure the required settings before starting running the software and how to operate the software.
This product is intended for the use after the registration in network cameras. Be sure to refer to the operating
instructions of the network cameras in use together with this manual.
The illustrations of the screens of the network camera used in these operating instructions may be different
depending on the network camera in use.
Adobe® Reader® is required to read these operating instructions (PDF) on the provided CD-ROM.
When the Adobe Reader is not installed on the personal computer (hereinafter, PC), download the latest Adobe
Reader from the Adobe web site and install it.
System requirements
For further information about the system requirements for the operation from the PC, refer to the operating
instructions of the network cameras in use.
Trademarks and registered trademarks
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
• All other trademarks identied herein are the property of their respective owners.
Abbreviations
The following abbreviations are used in these operating instructions.
Network disk recorders are described as recorders, and network cameras as cameras.
Page 4
Before using this product
• The motion detection function will not effectively work in the following situations or may sometimes be malfunctioning.
• There is no difference in luminance level between the moving object and background.
• Luminance level of image is too low (During nighttime, etc.)
• Movement of object is too fast or too slow.
• Object is too big or too small.
• Luminance level of shooting area is subject to change (outdoors, by the window, etc.)
• Outside light (sunlight, headlights, etc.) enters the shooting area.
• Fluorescent light is ickering.
• Depth of object is too long.
• Dirt, drip, or splash is on the dome cover of camera.
• The subject is moving directly toward the camera.
• Too many objects are moving.
• Camera is shaking.
• Weather condition is extremely poor.
• Several people are crossing with each other.
• The detection area is blocked with shadows.
• For 1 minute after the power is turned on, the camera settings are changed or the angular eld of view is
changed for the camera, false detection may occur.
• In no event shall Panasonic Corporation be liable to any party or any person for any problem, consequential
inconvenience, or loss or damage, arising out of this setting.
• This function is not intended for preventing theft or re.
• In no event shall Panasonic Corporation be liable to any party or any person for any accidents or loss.
4 5
Page 5
Operations flow
Before
purchasing
z
x
c
Check the compatible models and software versions in the following
URL when registering the Extension Software.
http://security.panasonic.com/kms/
Install the Extension Software
☞ page 6
Obtain the Registration Key
☞ pages
Register the Registration Key
☞ page 7
6-7
Register the Registration Key
obtained in Step x in the cameras.
v
Configure the Vehicle Incident Detection function
☞ pages 8-14
Start operations
Configure the Vehicle Incident
Detection function.
Page 6
How to obtain and register the Registration Key
This product needs to be activated by "Registration Key" issued by Key Management System before you start
using.
The registration of the Registration Key is only operable by users whose access level is [1. Administrator].
Refer to the operating instructions of the camera for how to configure the access level.
How to obtain and register the Registration Key
Step 1
Install the Extension Software.
(1) Access the following URL to download the
Extension Software and save it onto the PC.
http://security.panasonic.com/kms/
(2) Access the camera, and display the setup menu -
the "Maintenance" page - the [Upgrade] tab by
clicking the corresponding buttons and tab.
(4) Click the [Execute] button.
The installation of the Extension Software will
start.
Important:
• Use the le (with an ".ext" extension) specied by
Panasonic when installing the Extension Software.
• Do not turn off the power of the camera when installing the software. Do not perform any operations until the installation is completed.
Step 2
Obtain the Registration Key.
(3) Click the [Ext. software >>] button and display the
"Ext. software" window.
Then, click the [Browse...] button and designate
the downloaded Extension Software.
(1) Check the MPR ID, Activation Key No. and
Registration ID.
Access the camera, and display the setup menu -
the "Maintenance" page - the [Upgrade] tab by
clicking the corresponding buttons and tab.
Click "Registration of application" -
"Registration>>" to display the "Entry information
of the key management system" page, and check
the MPR ID.
* The MPR ID can also be checked on the product
package.
The Activation Key No. and Registration ID are
shown on the Activation Key Card.
(2) Please access and login to the following URL
"Key Management System" from your PC or
Mobile Phone.
For PC: https://kms.business.panasonic.net/
ipkms/pc/home.htm
Temporary User ID: kmsadmin_reg
6 7
Page 7
Password: hpynBaxb
* If this temporary User ID and password does not
work, go to the above URL to check the latest
temporary User ID and password.
For mobile: https://kms.business.panasonic.net/
cgi-bin/ipkms/m-key/license.cgi?MODE=key_
login (To issue the "Registration Key" only.)
* Certain mobile phone are not compatible with
"Key Management System".
* You may not access "Key Management System"
for server maintenance without notice.
(3) Please create your User ID and password, if it is
the first time to access this system.
Login as a temporary user using the User ID and
password written on the web page.
Register required information and create your
account.
(4) Enter the registered User ID and password on the
"Key Management System" for login.
(5) Enter "MPR ID", "Installation Site Information",
"Activation Key No." and "Registration ID" by following the instructions displayed on the monitor.
Step 3
Register the Registration Key.
Access the camera, and click the [Ext. software >>]
(1)
button in the [Upgrade] tab from the setup menu the "Maintenance" page.
(2) Click the [Registration >>] button and display the
"Registration of application" window.
(6) The Registration Key will be issued.
Note it down on the Activation Key Card, and
keep the card so as not to lose.
Important:
• Be careful not to mistake the combination of MPR
ID, Activation Key No. and Registration ID used
for the camera. (Once the Registration Key has
been issued for an Activation Key No., the
Registration Key cannot be issued again in combination with another MPR ID.)
• To issue the Registration Key for another camera,
perform (5) and (6) in Step 3.
• If registering the multiple Registration Keys for
one camera, it is possible to issue the Registration
Keys by entering the multiple Activation Key Nos.
and Registration IDs in Step 3.
Page 8
(3) Enter the Registration Key obtained in Step 2 in
the "Registration Key" field, and click the [Set]
button.
After the Registration Key is registered, the
Extension Software will be validated.
Enter the Registration Key without the hyphens (-).
* Check the compatible models in the following
URL when registering the application.
http://security.panasonic.com/kms/
* Uninstall can be performed by pressing the
[Uninstall] button.
8 9
Page 9
About the Vehicle Incident Detection function
When the application for the Vehicle Incident Detection function is added, it becomes possible to use the
Vehicle Incident Detection function, which is one of the image recognition functions.
● Stopped vehicle
An alarm notification will be provided if a stopped vehicle is detected in the preset lane.
The stop time of a vehicle can be set in the menu.
● Wrong-way vehicle
An alarm notification will be provided if a vehicle that runs wrong way is detected in the preset lane.
The moving direction of vehicles can be set in the menu.
About setup page of the Vehicle Incident Detection function when vehicle detection is activated
q Alarm occurrence indication
q Alarm occurrence indication
Lights up when stopped vehicle or vehicle going
wrong way is detected.
Page 10
Enable the Vehicle Incident Detection function [Alarm]
To use the Vehicle Incident Detection function, select "4:3" for "Image capture mode" in advance, and configure the VMD function type on the [Alarm] tab of the "Alarm" page.
[Function type]
Select either function, the conventional VMD function
or the Vehicle Incident Detection function.
It is impossible to use both the VMD function and
Vehicle Incident Detection function simultaneously.
VMD: Enables the conventional VMD function.
Vehicle Incident Detection: Enables the Vehicle
Incident Detection function.
Default: VMD
Note:
• When "Vehicle Incident Detection" is selected, it is
required to switch "Image capture mode" for
"4:3".
[VMD/Vehicle Incident Detection]
When clicking the [Vehicle Incident Detection >>] button, the [Vehicle Incident Detection] tab will be displayed.
This tab is displayed when "Vehicle Incident
Detection" is selected for "Function type".
10 11
Page 11
Configure the Vehicle Incident Detection function [Vehicle Incident Detection]
Click the [Vehicle Incident Detection] tab on the "Alarm" page.
In the setup page of the Vehicle Incident Detection function, camera height, lane, type of detection, running
direction of vehicles, detection time of stopped vehicle, and the night mode can be set.
[Camera height]
Select a camera height from the following.
2.5m(8.5ft)/ 2.75m(9.0ft)/ 3.0m(10.0ft)/
3.25m(11.0ft)/ 3.5m(11.5ft)/ 3.75m(12.5ft)/
4.0m(13.5ft)/ 4.25m(14.0ft)/ 4.5m(15.0ft)/
4.75m(16.0ft)/ 5.0m(16.5ft)/ 5.5m(18.5ft)/
6.0m(20.0ft)/ 6.5m(21.5ft)/ 7.0m(23.5ft)/
7.5m(25.0ft)/ 8.0m(26.5ft)/ 8.5m(28.5ft)/
9.0m(30.0ft)/ 9.5m(31.5ft)/ 10.0m(33.5ft)/
12.0m(40.0ft)/ 14.0m(46.5ft)/ 16.0m(53.5ft)/
18.0m(60.0ft)/ 20.0m(66.5ft)/ 22.0m(73.5ft)/
24.0m(80.0ft)/ 26.0m(86.5ft)/ 28.0m(93.5ft)/
30.0m(100.0ft)
If the [Auto] button is clicked, the distance from the
ground to the camera will be measured and set automatically by using the internal function of the camera.
Default: 2.5m(8.5ft)
Important:
• The distance to the imaging vehicle will be calculated automatically by the "Camera height". To increase the accuracy, set the "Camera height" correctly.
• The auto-setup function may not be able to measure the distance correctly depending on the camera setup position or the installation place. In such
a case, set the "Camera height" manually.
Page 12
[Traffic lane setup]
Specifies the target traffic lane (detection area). Up to
four lanes can be set.
After selecting the lane number, draw traffic lanes on
the screen to define the target area for detection.
The "Traffic lane setup" is available for each camera
preset position.
The traffic lane can be set when the camera preset
position is registered in advance and the camera is
moved to the preset position. (☞ Page 13)
To delete the set traffic lane, select the lane and click
the [Clear] button.
To delete all the lanes, click the [All clear] button.
Lane 1/ Lane 2/ Lane 3/ Lane 4
Default: Lane 1
[Detection type]
Specifies the detection type for the lane 1 to 4.
If the traffic lane is set after setting up the detection
type, all the detection items will be enabled automatically.
Wrong-way vehicle: An alarm notification will be pro-
vided if a vehicle that runs wrong way is detected.
Stopped vehicle: An alarm notification will be pro-
vided if a stopped vehicle is detected.
Default: Off
[Moving direction]
Specifies the moving direction of the vehicles in the
traffic lane 1 to 4.
,
Default:
[Night mode]
Selects the image quality for detecting the vehicle.
Priority to monitoring: Automatically adjusts the
image quality to provide better look even at
night.
The accuracy of vehicle detection may drop
affected by the head light and others.
Priority to Detection: The darker image will be pro-
vided at night. It is possible to lower the effect
of the head light or the like and improve the
detection accuracy.
Default: Priority to monitoring
• The [Alarm occurrence indication] button will be
displayed in the following cases:
• Motion is detected with the Vehicle Incident
Detection function
• Alarm is input to a terminal alarm
• Command alarm is input
• Depending on the network environment, the notication may be delayed even when "Real time" is
selected for "Status update mode" in the [Basic]
tab of the "Basic" page.
• The detection area may be deviated if "Image
capture mode" is changed after setting up the detection area of the vehicle detection. When
"Image capture mode" is changed, make sure to
check the detection area setting.
• The Vehicle Incident Detection function is not intended for preventing theft, re, or the like. In no
event shall Panasonic Corporation be liable to any
party or any person for any accidents or loss.
[Detection time of Stopped Vehicle]
Specifies the time for judging the vehicle stop for the
"Stopped vehicle".
5s - 15s
Default: 10s
Step 1
Set up the preset positions in the [Image/Position]
page, and move to a preset position.
Setting for lanes, detection type, moving direction,
detection time of stopped vehicle, and night mode
will become available.
Note:
• If changing the camera direction is required after
moving to a preset position, it is possible to reset
the preset position after adjusting the position
with the zoom, focus, and other operations in the
[Vehicle Incident Detection] tab.
Step 2
Set the "Camera height".
Set the camera height manually or automatically.
12 13
Page 13
Step 3
Select a lane in "Traffic lane setup", and draw a line
by dragging the mouse on the screen.
Step 5
Set the "Moving direction".
Set the normal moving direction of the vehicles.
Note:
• The moving direction may not be accurate depending on the angle or position of the lane. In
such a case, make adjustment by changing the
angle or preset positions.
Step 6
Set "Detection time of Stopped Vehicle".
It can be set from 5 to 15 seconds.
Set the shorter time if you wish to obtain a quick
alarm notification when the vehicle is stopped.
Otherwise, set the longer time.
A traffic lane can be drawn by connecting the 5 lines
at maximum.
First, draw the line q. Left-click to set the starting
point, drag the mouse, and then release the mouse to
set the end point. Only the horizontal line can be
drawn. Next, draw the line w. The edge point of the
line q and w will be automatically connected.
If the lane is curved, draw more of e to t to draw
along the lane.
Note:
• Once the lines are drawn, it is possible to extend/
shorten or move the line of q to t by clicking.
Make ne adjustment according to the lane.
• The red line on the screen indicates the detection
limit. The detection limit moves according to the
tilt angle and zoom ratio. The lane can be set
above the limit line, but the accuracy of vehicle
detection will drop.
Step 4
Set the detection type of each lane (Wrong-way
/
vehicle
If the traffic lane is set after setting up the detection
type, all the detection items will be enabled automatically. When "Wrong-way vehicle" and "Stopped vehicle" are both disabled, the lane will be displayed with
a dotted line.
Stopped vehicle) in "Detection type".
Step 7
Set the "Night mode".
Select either "Priority to monitoring" that prioritize the
image quality at night or "Priority to Detection" that
prioritize the vehicle detection.
Step 8
Perform the operation check.
The function of Vehicle Incident Detection can be
checked with the image displayed in the setup window.
The following image will be superimposed on the
actual image.
• The vehicle being tracked is framed in blue.
• When the vehicle being tracked is moved, the trail
of the vehicle will be drawn with the green line.
• If the vehicle going wrong-way or being stopped
is detected, the vehicle will be framed in red.
Since the image recognition data will be initialized
immediately after the preset position is moved or
reset, it may take two to four minutes to start the
Vehicle Incident Detection function.
Page 14
• When Vehicle Incident Detection is started, make
sure that the vehicles passing in the preset lane
are framed and their trails are correctly displayed.
• If those are not properly displayed, adjust the
width or slope of the lane. (The allowable range of
slope is vertical to 45 degrees. Between vertical
to 45 degrees is recommended. The smaller slope
angle will provide better detection accuracy.)
Note:
• When the "Priority to monitoring" is selected, the
image quality will be maintained, but the accuracy
of vehicle detection may drop due to head light
effect or other environmental conditions.
• When the "Priority to Detection" is selected, the
darker and lower quality of image will be provided.
It is due to the adjustment to be made for avoiding the effect by the head light in order to improve
the detection accuracy. Select the either one according to the current situation.
14
Page 15
For U.S. and Canada:
For Europe and other countries:
Panasonic System Communications Company of North America,
Unit of Panasonic Corporation of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
(905)624-5010
www.panasonic.ca
© Panasonic Corporation 2017 N0417-0 PGQP2472ZA
Panasonic Corporation
http://www.panasonic.com
Panasonic Corporation
Osaka, Japan
Authorised Representative in EU:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Loading...