Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
Refer to the Operating Instructions (PDF) for further information.
List of setup menu
Setup item Description
CAMERA Performs the camera operation settings.
CAMERA ID This item specifies the camera title. The camera title that indicates the cam-
era location and other information about the camera is created with alphanu-
meric characters and symbol, and displayed on the screen.
ALC/MANUAL Performs settings Light control.
SHUTTER Specifies the electronic shutter speed.
AGC Specifies gain adjustment.
SENS UP Specifies electronic sensitivity enhancement.
SYNC Specifies the synchronization type.
WHITE BAL Specifies white balance adjustment.
MOTION DET Performs settings Motion Detector.
DNR Selects the level of the digital noise reduction function.
RESOLUTION Selects the resolution NORMAL or HIGH.
BW MODE Perfor m s each setting regarding the black-and-white mode such as
Switching between color and black-and-white images.
PRIVACY ZONE Hides undesired portions in the camera shooting area.
AF MODE Select setting auto focus mode.
ZOOM LIMIT A limitation is provided to prohibit the ZOOM operation in the direction of
TELE, exceeding the preset value.
UPSIDE-DOWN The video image is reversed upside down during ON setting.
MIRROR The video image is reversed to the right and left during ON setting.
PRESET POSITION Performs settings preset position.
PRESET Select the position number. The preset setting menu appears on the monitor
screen.
MAP The PRESET NUMBER SET menu appears on the monitor screen.
HOME POSITION To set a position number for the home position
SELF RETURN Set up the time needed to return to the home position automatically.
IMAGE HOLD The camera picture remains as a still image on the monitor screen until the
camera reaches the preset position.
SPECIAL
CHROMA GAIN Setting the Chroma Level.
AP GAIN Setting the Aperture Level.
PEDESTAL Setting the Pedestal Level.
PIX OFF This setting can assign a blemish position and compensate the blemish.
ZOOM INVERSE The TELE/WIDE operation from the lens control terminal or the UP and
DOWN buttons is reversed during ON setting.
FOCUS INVERSE The FAR/NEAR operation from the lens control terminal or the UP and DOWN
buttons is reversed during ON setting.
REFRESH The Refresh operation is started.
CAMERA RESET The camera is reset to the factory default settings.
COMMUNICATION Select RS485 or COAX or COAX (RCV).
PASSWORD LOCK Performs settings password lock.
SETUP MENU
4