Panasonic WV-CP214 User Manual

Color CCTV Cameras

WV-CP210/WV-CP212/WV-CP214

- - r

Operating

Infractions

n C

О

'■J

i

\W-CP210

V.V-CP212

r

I .

в

Panasonic

Цб'-эг« etten&t nfi connect or cooraio (hia oroduc:

p;ee$o 'вас :heee ineicuciicria conoH^eiy

WVCP214

(Lenit: opfton}

<B>

CAUTION

RISK OF ELECTRIC SHOCK

A

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK), NO USER SER
VICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PER
SONNEL

A

SA 1965

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

DO NOT OPEN

The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the pres
ence of uninsulated "dangerous volt
age" within the product's enclosure that
may be of sufficient magnitude to con
stitute a risk of electric shock to per
sons.

The exclamation point within an equi
lateral triangle is intended to alert the
user to the presence of important oper
ating and maintenance (servicing)

instructions in the literature accompa
nying the appliance.

A

-------------------------------------------------------------ForU.S.A—,

Warning: I
This equipment generates and uses radio frequency energy
and if not installed and used properly, i,e„ in strict accor
dance with the instruction manual, may cause harmful
interference to radio communications. It has been tested
and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection
against such interference when operated in a commercial
environment.

----------------------------------------------------------------------------

This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department
of Communications.

The serial number of this product may be found on the bot
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.

Model No.

Serial No. -______________________________j

___________________________________________

For CANADA—I

____________

CONTENTS

PREFACE .........................................................................................................................................^..............................2

FEATURES ......................................................................................................................................................................2

PRECAUTIONS.............................................................................................................................................:

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS.......................................................................................4

CONNECTIONS ..............................................................................................................................................................7

LENSES.................................................................................................................... :.....................................................10

INSTALLATION OF CAMERA .......................................................................................................................................16

FOCUS OR FLANGE-BACK ADJUSTMENT .
PREVENTION OF BLOOMING AND SMEAR
LENS MAINTENANCE AND CLEANING

SPECIFICATIONS ........................................

STANDARD ACCESSORY
OPTIONAL ACCESSORIES

..........................

........................

......

..................

3

17
17
17
18
19
19

- 1 -

PREFACE

FEATURES

Panasonic's WV'CP210 Series camera introduce a new
low end color camera through the use of 1/3 inch inter*
line transfer CCD.
Minimum illumination is achieved 0.06 footcandle (0,6
lux) with the use of newly developed aspherical high
speed lenses.
In addition, ability to shoot indoor scenes with a fixed
iris lens by use of Electronic Light Control (ELC) func
tion.

Minimum illumination of 0.06 footcandle (0.6 lux) at
E0.75 [equivalent 0.2 footcandle (2 lux) at FI .4]

and Signal-to-Noise ratio of 46 dB by employing a

1/3 inch interline transfer CCD image sensor with
512(H)x492 (V) pixels.
330 lines of horizontal resolution
Optional C-mount lens can be used together with
optional Lens Mount Converter (C-rhount adaptor)
WV-AD20.
Selectable internal sync (INT), line-locked sync
(LL) or Multiplexed Vertical Drive (VD2) for WV­CP210/WV-CP214.
Selectable automatic gain control (AGC) ON (+12
dB) or OFF.
Selectable automatic tracing white balance control
(ATV/) or automatic white balance control (AWC).
Adjustable auto iris control level or electronic light
control level.

-2-

PRECAUTIONS

Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws
or cover. There are no user-serviceable parts
inside.
Refer servicing to qualified service personnel.

Handle the camera with care.

Do not abuse the camera. Avoid striking or shak
ing it. The camera could be damaged by improp
er handling or storage.

Do not expose the camera to rain or moisture,
or try to operate it in wet areas.

Do take immediate action if ever the camera do
becomes wet. Turn power off and refer servicing
to qualified service personnel. Moisture can dam
age the camera and also create the danger of
electric shock.

Never face the camera toward the sun.

Whether the camera is in use or not, never face it
toward the sun. Do use caution when operating
the camera in the vicinity of spot lights or other
bright lights and light reflecting objects.

Do not operate the camera beyond its
temperature, humidity or power source ratings.

Do not use the camera in an extreme environment
where high temperature or high humidity exist.
Use the camera under conditions where tempera
tures are within 14°F - 122°F {-10°C - -f-50°C), and
humidity is beiow 90%, The input power source is

120V AC 60 Hz for WV-CP210, 12V DC for WV-

CP212 or 24V AC 60 Hz for WV-CP214.

Caution;

To prevent fire or shock hazard, the UL list
ed wire VW-1, style 1007 should be used for

DC 12V or AC 24V Input Terminal.

-3-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

(1) Auto Iris Lens Connector

This 4-pin connector supplies the power and DC
control signal to the auto iris lens.

(6) AC Power Cord

(7) Power Indicator (POWER)

(2) Flage-back Adjusting Ring

This ring is used to adjust the back focal length or

picture focus by rotating this ring.

(3) Lens (Option)

See page 10, 11, 12, 13 and 14 for details on lens

selection. Standard C-mount lens can be used
with the camera by use of optional lens mount
converter (C-mount adaptor) WV-AD20.

(4) Camera Mounting Screw Hole

This threaded hole (1/4* - 20) is used to mount the
camera onto a mounting bracket or tripod.

(5) Video Output Connector (VIDEO OUT)

A 1.0 Vp-p / 75 ohms composite video signal is

provided at this connector.
Whenever the multiplexed vertical drive (VD2) sig

nal is supplied to this connector, the camera syn

chronization mode is automatically set to Vertical

Drive Lock.

(8) Sync Selection Switch (LL/INT) (WV-CP210/

WV-CP214)

This switch is used to select the camera synchro
nization mode.

INT: The camera synchronization mode is set to

internal 2 ; 1 interlace.

LL: The camera synchronization mode is set to

Line-lock.

(9) AGC ON/OFF Switch (AGC, ON/OFF)

This switche is used to select the gain of the video
amplifier as follows.

ON: When the lens iris is fully opened under a low

light condition, a clear picture is obtained by
automatic increase of the gain.

OFF: A natural and low-noise picture is obtained

under a low light condition.

-5-