Panasonic WV-CP210, WV-CP212 User Manual
Specifications and Main Features
- Pick-up Device: Sony 1/3 inch color interline transfer ccd
- Scanning Area: The area of 1/3" pick up tube is equal to: 4.8(H) x 3.6(V) mm
- Synchronization: Internal, line Locked or multiplexed VD2.
- Scanning System: 2: 1 Interlace.
- Scanning:
- Horizontal: 15.734 KHz
- Vertical: 59.94 Hz
- Horizontal Resolution: 330 lines.
- Video Output: 1.0 Vp - p composite 75 ohms / BNC connector.
- Signal-to-Noise Ratio: 46 dB (AGC OFF, weight ON).
- Electronic Light Control: 1/15,700 sec.
- Minimum Illumination: 0.06 footcandle (0.6 lux) at F0.75 [Equivalent of 0.2 footcandle (2 lux) at F1.4]
- Gain Control: Selectable AGC ON (+12 dB) or OFF
- White Balance: Selectable ATW ON or OFF (AWC)
- Detail Level: Selectable SHARP or SOFT
- Lens Mount: CS-mount
- Ambient Operating Temperature: 14°F to 122°F (-10°C to +50°C)
- Ambient Operating Humidity: 90% ~ 90%
- Power Source:
- WV-CP210: 120V AC 60 Hz
- WV-CP212: 12V DC
- WV-CP214: 24V AC 60 Hz
- Power Consumption:
- WV-CP210: 2.6W
- WV-CP212: 0.2A
- WV-CP214: 2.4W
- Dimensions (without lens):寸法：2-5/8" (W) x 2-9/16" (H) x 4-5/8" (D) (67 (W) x 65 (H) x 118 (D) mm
- Weights (without lens):
- WV-CP210: 1.4 lbs. (620g)
- WV-CP212: 0.9 lbs. (420g)
- WV-CP214: 1.0 lbs. (470g)
---
Frequently Asked Questions
Q1: What type of lenses can be used in the WV-CP210 series camera?
A1: The camera can be used with standard C-mount lenses with the use of the optional lens mount converter (C-mount adaptor) WV-AD20.
Q2: What is the lowest level of light that the WV-CP210 camera can work with?
A2: WV-CP210 has an operating light level of as low as 0.06 foot candle which is 0.6 lux at F0.75 or 0.2 foot candle 2lux at F1.4 or above.
Q3: Is it feasible to operate the camera in a moist environment?
A3: Yes, the camera is designed for working in an environment in which the humidity does not exceed 90%.
Q4: What voltage range would be fed to the WV-CP212 model?
A4: The WV-CP212 model operates with 12V DC with a recommended maximum of 16V and minimum of 10.5V.
Q5: What is the procedure to alter the white balance?
A5: The camera possesses a certain attribute that allows users to select and turn on or off automatic tracing white balance ATW control.
User Manual
Loading...