Panasonic WV-CP160 User Manual
Colour CCTV Camera
S
u
p
e
r D
y
n
am
ic
Operating Instructions
(Lens Option)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Model No.
WV -CP160E
N0300-0 YWV8QA5394AN Printed in Japan
N 19
We declare under our sole responsibility that the product
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directive EEC/89/336.
Dichiariamo sotto nostra esclusiva responsabilità che il
prodotto a cui si riferisce la presente dichiarazione è conforme agli standard o altri documenti normativi ottemperanti alle disposizioni della direttiva CEE/89/336.
Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijn 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med standarder eller andre normative dokumenter i følge
bestemmelserne i direktiv 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt
till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa
dokument som framställs i EEC-direktiv nr. 89/336.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivin 89/336/EEC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktiv 89/336/EEC.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
PREF ACE
Panasonic's WV-CP160E colour digital camera introduces a new level of high picture quality
and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having
752 horizontal pixels (picture elements), and digital signal processing LSIs. This model
offers cutting-edge technology for advanced video surveillance. This VP multiplex camera
can be connected with specified monitor by single coaxial cable.
PRECAUTIONS
Super Dynamic
Super Dynamic
W
V
-
G
P
1
6
0
GP160
q t
y
!3
!0
o
u
i
w
r
e
!5
!8
!1
!2
MONITOR OUT
NC
MIC OFF-ON
SOFT-SHARP
LOCK
!6
!7
!4
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
FEATURES
1. The following functions are built in.
(1) Auto Light Control (ALC)/Electronic Light Control (ELC)
(2) The SUPER-D2 function eliminates interference by strong background lighting
which makes the camera picture dark, such as a spotlight.
Dynamic range of 48 dB.
(3) Auto/Manual White Balance Function
(4) Electronic Shutter Function
2. Signal-to-noise ratio of 50 dB
3. Minimum illumination of 0.8 lx (0.08 footcandle) with F1.4 lenses.
4. Minimum illumination of 0.4 lx (0.04 footcandle) with Panasonic aspherical high speed
(F0.75) lenses.
5. 480 lines of horizontal resolution
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Open the panel to the upper left until it stops by rotating counterclockwise.
q Auto Iris Lens Connector
This connector is used to connect the auto iris lens. It supplies power and DC control
signal to the auto iris lens.
w Flange-back Adjusting Ring
This ring is used to adjust the back focal length or picture focus by rotating it.
e Lens (Option)
r Camera Mounting Screw Hole
This hole is used to mount the camera onto a mounting bracket.
t Focus Fixing Screw
y Down Button ( )
This button is used to move the cursor downward. It is also used to select items in the
CAM SET UP menu.
u Right Button ( )
This button is used to move the cursor to the right. It also selects the mode and can be
used to adjust some levels.
5. Clean the CCD faceplate with care.
Rear Panel
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
7. Do not operate the camera beyond the specified temperature or humidity.
Use the camera under conditions where temperature is between –10°C - +50°C (14°F 122°F), and humidity is below 90%.
6. High quality picture:
(a) 2H type vertical enhancer for greater picture sharpness
(b) Chroma averaging circuit for better colour signal-to-noise ratio
(c) Minimum of aliasing on fine objects
(d) Expanded dynamic range by use of knee circuit
(e) Highlight aperture correction for greater picture detail of bright objects
7. Ability to shoot indoor scenes with fixed iris lens by use of Electronic Light Control (ELC)
function.
8. Sound around the camera can be monitored by built-in microphone.
i Left Button ( )
This button is used to move the cursor to the left. It also selects the mode and can be
used to adjust some levels.
o Up Button ( )
This button is used to move the cursor upward. It is also used to select items in the
CAM SET UP menu.
!0 Set Button ( )
This button is used to activate an item selected in the CAM SET UP menu.
!1 Selector (NC)
This selector is not used on this camera.
!2 Detail Level Selector (SOFT-SHARP)
This selector is used to select the detail / aperture level as follows.
SOFT: When a quad system is connected to this camera, select this position.
SHARP: Select this position usually.
!3 Microphone Selector (MIC OFF-ON)
Select ON or OFF as needed.
!4 Microphone
!5 Power indicator
This indicator lights up when the power of this camera is on.
!6 Monitor Output Connector (MONITOR OUT)
This connector is used to connect with the video input connector of the monitor.
!7 Video Output Terminal
This terminal is used to connect with the video input connector of the monitor.
!8 Rear Cover
The rear cover can be removed to gain access to the terminal.
CONNECTIONS
Super Dynamic
Super Dynamic
Super Dynamic
Super Dynamic
Colour Monitor
WV-CM143
(Rear Panel)
Coaxial Cable
Coaxial Cable
Coaxial Cable
Coaxial Cable
Cameras
4 3 2 1
CAMERA INPUT
VIDEO OUT VIDEO IN
AUDIO OUT AUDIO IN
OUT
TIMING SELECT
IN
REMOTE OUT
ALARM
CONTROL
SPOT MONITOR CONTROL IN
4321
RESETGNDALL
MODE
STDBY
4321
GNDRECOVER
CAMERA
EXTENSION IN
FOCUS
CAMERA POWER
ON
OFF
Caution: Keep the POWER switch of the specified monitor, Camera Extension Unit and
Camera Drive Unit in OFF position while making connections. If the power of these units
is ON during connections, the camera does not function due to the built-in protection
circuit which protects it against wrong connections.
Basic System
Connect the coaxial cables between the camera and CAMERA IN connector of the
specified monitor or Camera Drive Unit. The approximate maximum cable length is as
follows:
Coaxial Maximum DC R/300 m (1 000 ft) of
Cable Type Cable Length Inner Conductor
RG-59/U 200 m (660 ft) Less than 30 Ω
RG-6/U 500 m (1 650 ft) Less than 12 Ω
The maximum DC resistance between the camera and these unit is 20 Ω.
Mounting the Lens
Caution:
Before you mount the lens, loosen the screw on the side of the camera, and rotate the
frange-back adjusting ring clockwise until it stops. If the ring is not at the end, the inner
glass or CCD image sensor may be
damaged.
1. Mount the lens by turning it clockwise
on the lens mount of the camera.
Screw
Flange-back
Adjusting Ring
2. Connect the lens cable to the auto iris
lens connector on the side of the camera.
ALC Connector
Caution for Mounting the Lens
The lens mount should be a CS-mount (1”-32UN) and the lens weight should be less than
450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by
using the supporter.
The protrusion at the rear of the lens should be as shown below:
CS-mount: Less than 8 mm (5/16”)
FOCUS OR FLANGE-BACK ADJUSTMENT
The following adjustment should be made by qualified service personnel or system
installers.
1. Loosen the screw on the side of the
camera.
2. Turn the flange-back adjusting ring to
the desired position.
Caution: Do not rotate the ring coun-
terclockwise by force after it stops.
If the ring is rotated by force, the
inner lens or CCD image sensor
may be damaged.
3. Tighten the screw on the side of the
camera.
Cautions:
Screw
• Tightening the screw by force will cause damage to the screw or deviation of
focus.
• To use the C-mount lens, the Lens Mount Converter (C-mount adapter) WV-AD20
should be used with the camera.
Flange-back
Adjusting Ring
Loading...