Panasonic WR-X22NH User Manual

A UDIO MIXERS

Compact Audio Mixer

WR-X22NH

Dimensions

Block Diagram

144

480

221

465

146

Frequency Response 20Hz ~ 20kHz, +0.5dB, –1.0dB (Stereo input)

20Hz ~ 20kHz, +0.5dB, –2.5dB (Mono input with a built-in HPF off)

T.H.D 1% or less (Mono input)
Crosstalk –70dB or less 1kHz (between adjacent input channels)
Maximum Voltage Gain 30dB±3dB (Mono input mic)

60dB±3dB (Mono input line)
30dB±3dB (Stereo input)

Equalizer high : peaking type 4kHz±6dB

low : shelving type 70Hz±15dB

Maximum Input Level +10dB or more (Mono input mic)

+20dB or more (Stereo input)

Maximum Output Level +24 or more
Equivalent Input Noise –125dB or less (Source impedance 150Ω AUDIO BAND FILTER)
Residual Noise –90dB or less (AUDIO BAND FILTER)
Power Consumption 35W (30kcal)
Power Supply AC220 ~ 240V, 50Hz
Dimensions 480 (W) x221 (H) x144 (D) mm
Weight (approx.) 7.5 kg

SPECIFICATIONS

•

For medium-size conference rooms and multi-purpose audio and video rooms, 8 mono inputs and 4 stereo inputs, 2 main
stereo outputs.

•

Ch7-8 of these systems are equipped with phantom power source(48V) for using microphones.

•

One-touch access to 8 different pre-registered acoustic fields.

•

Easy-to-use and prevending operation mistakes.

•

The 5U body design makes flexible setup possible.

•

Several WR-X22 units under a single integrated control

Pattern Control Input
Pattern Control Output
Power Control Output

Make Contact Input
Make Contact Output
Make Contact Output

8
8
1

D-SUB 15 pin
D-BUS 15 pin
6 pin connector

Built-in diode for protection
Photo coupler open collector output
Power control unit connection

XLR3-32 type
XLR3-32 type
Combined (unbalanced)
RCA pin jack

+4
+4
+4

–10

600Ω (unbalanced)
600Ω (balanced)
10kΩ (unbalanced)
10k (unbalanced)

2
2
1
1

Main Output
Sub Output
Send Output
Rec Output

10kΩ (balanced)

5kΩ (balanced)
10kΩ (unbalance)
10kΩ (unbalanced)
10kΩ (unbalanced)

6

2
4
1
1

XLR3-31 type (balanced)

XLR3-31 type (balanced)
RCA pin jack
Combined (unbalanced)
Combined (unbalanced)

–60~–20dB Mics
–30~+10dB Lines
–60~10dB
+10/0/–10dB
+4dB
+4dB

Mono Input1~6

Mono Input 7,8
Stereo Input 1~4
Return Input
Sub Input

Input Characteristics

Output Characteristics

Control Input / Output

Control Input / Output Formula Control

numbers

Connectors Remarks

Output Characteristics Connector Nominal Level Adapted Impedance

Numbers

Input Characteristics Connectors Nominal Level Actual Impedance Numbers

XLR-F type connecter

XLR-M type connecter

Un-Balanced phone JK
RCA Pin JK

SAME AS ABOVE

SAME AS ABOVE

SAME AS ABOVE

SAME AS ABOVE

SAME AS ABOVE

1

1

2
3
4

SAME AS ABOVE

SAME AS ABOVE

SAME AS ABOVE

2
3
4

5
6

MONO
INPUT

MIC -60~-10dB 5kΩ
LINE -40~+10dB 10kΩ

+10/0/-10dB 10kΩ

+4dB 10kΩ

+4dB 10kΩ

PAD

MIC
LINE

INPUT

MIC/LINE

SIGNAL/PEAK

HPF(70Hz)

EQ

Lo Hi

MAIN 1
MAIN 2

SUB 1
SUB 2

SEND

SAME AS ABOVE

7

8

MONO
INPUT

STEREO
INPUT

RTRN INPUT

SUB INPUT

-60~-10dB 5kΩ

PHANTOM

INPUT

INPUT

SIGNAL/PEAK

SIGNAL/PEAK

HPF

EQ

Lo Hi

MAIN 1
MAIN 2

SUB 1
SUB 2

MAIN 1

MAIN 2

SUB 1
SUB 2

MAIN 1

MAIN 2

SUB 1

SUB 2

SEND

MIC

L

R

RTRN

OUTPUT LEVEL

BTL

MAIN 1
OUT PUT

REC
OUT PUT

L

BTL

R

4dB
600Ωadapted

OUTPUT LEVEL

OUTPUT LEVEL

BTL

MAIN 1
OUT PUT

L

BTL

BTL

R

4dB
600Ωadapted

SUB 1
OUT PUT

4dB
600Ωadapted

SUB 2
OUT PUT

4dB
600Ωadapted

+4dB 10kΩ

SEND
OUT PUT

PATTERN CONTROL

+4dB 10kΩ

L

R

OUTPUT LEVEL

BTL

IN

OUT

REMOTE

AC

PT

reg

POWER

POWER

SIGNAL GND

PATTEN SELECTOR

MAIN 1/L BUS

MAIN 1/R BUS

MAIN 2/L BUS

SUB 1 BUS

SUB 2 BUS

SEND BUS

MAIN 2/R BUS

Rear Panel

Unit: mm

PUBLIC ADDRESSRAMSA