Before attempting to connect or install this product,
please read these instructions carefully and save this manual for future use.
Extend Card (Character)
Model No. WJ-PB85D01
Caution
Hold this board only by its edges. Otherwise components on the board may be damaged by static electricity.
■ Preface
The WJ-PB85D01 Character Board is an optional board installed on the WJ-PB85X08 Camera Input Board to enable display of the time and date and camera number through the Video Output Port on the Camera Input Board.
■ Appearance
CN1
CN2
-1-
■ Installation
The following installation should be made by qualified service personnel or system installers.
● Installing a Character Board
Note: Before installing a Character Board, make sure to set jumper connectors (CN103, CN203, CN303, CN403, CN503, CN603, CN703, AND CN803) on the Camera Input Board to the specified positions. For board setting, refer to the instructions of the Camera Input Board.
To install the WJ-PB85D01 Character Board on the WJPB85X08 Camera Input Board, follow the procedure shown below.
1.Insert the connectors of the Character board into the specified connectors (CN102, CN202, CN302, CN402, CN502, CN602, CN702, and CN802) on the Camera Input board.
2.Place the Character board on the Camera Input board and plug in the boards.
3.Fix both boards with the two supplied screws (M3x6) as shown below.
-2-
Loading...