Panasonic WA-BA240N, WA-MA240N, WA-MA120N User Manual

Mixing Power Amplifiers

WA-MA120N
WA-MA240N

All-in-One Mixer and Amp

From the simplest to the most complex public address needs,
the WA-MA120N and WA-MA240N have what it takes. These

The Public Address System Made it Easy.

2 line inputs, 3 mic/line inputs, 1 remote mic input, 1 telephone paging input, and 1 emergency broadcast input allow
connection to all of the equipment a public address system or emergency broadcast system requires.

mixing power amplifiers combine multiple inputs with assigned priorities
and call signs to provide the flexibility required
for applications ranging from schools and business facilities,
factory, office and religious buildings. To ensure more
efficient and reliable communication, options including
program broadcasting and troubleshooting.

Select Call Sign
(1) Rising 4 sounds, (2) Falling
4 sounds, (3) Two sounds, one time

Emergency
Equipment

Connect Telephone
Paging

Switch to on for 2-channel
Broadcast from Input 1

CD/MD Player or Other Background Music Source Backup Battery in Case of Power Failure

Up to four (4) Remote Microphones

Surveillance Unit Slot

Attenuator Override

Low Impedance Speaker

High Impedance Speaker

DC+24V

This handy system is ideal for public announcements in all sorts of facilities.

at schools at Public facilities at Residential neighborhoods

at Department stores at Ski resorts at Museums and convention centers, and more

2

Basic Example

Priority Broadcast Feature Priorities are as
follows.

(1) Emergency announcement

(2) Telephone paging, input 1, message

from Sound Message Unit

(3) Remote microphone

(4) input 2, 3 and Line 1, 2

Higher priority broadcasts preempt lower
priority broadcasts.

*When (2) and (4) occur simultaneously and inputs
compete, mixing occurs. Sound level can be adjusted.

OTHER FEATURES

High impedance speaker output can be

•

switched easily between 100V and 70V
to adapt to system size.

Fully equipped with recording output, line

•

output, insertion input, through, and
regular output.

OPERATE ON/OFF allows remote

•

control from an external source.

Simultaneous broadcast can bypass an

•

external attenuator. Emergency
broadcasts can thus be heard even when
transmission to a particular area is
restricted by an attenuator.

Connecting the 24V battery allows

•

broadcasts to continue during power
outages.

ZONE 3

[F3 Restaurants Floor]

ZONE 2

[F2 Apparel Floor]

ZONE 1

[F1 Grocery Floor]

Reliable Cooling

Cooling fan control is provided by two
thermal sensors monitoring temperatures
inside the case.

Energy Saving Design

This mixing power amplifier uses Class-H
amplifier technology developed by RAMSA,
the Panasonic Professional Audio Group, to
minimize power consumption.

3

The mixing power amp for every broadcast objective

Taking Public Address to the Next Level.

2-channel Broadcast

Background music and announcement
transmission can be transmitted independently
to any of three zones, with background music
transmitted to one zone and announcements
transmitted to another zone.

*2-channel broadcast requires the optional WA-BA240N
Booster Power Amplifier

Broadcast
Simul

taneous

ly To

Multiple Remote Areas

For example, facilities with multiple buildings
can have a WA-MA120N or WA-MA240N
installed in each building. Via the simultaneous
broadcast BUS I/O connector, broadcasts can
be directed to selected all buildings at once.

SPECIFICATIONS

Model No. WA-MA120N WA-MA240N
Power Source
Power Non-operation mode (standby) 11 W 14 W
Consumption Under normal operating conditions 95 W 175 W
(AC) according to IEC60065

With rated output signal 330 W 680 W
Current Non-operation mode (standby) 0.1 A 0.1 A
Consumption Under normal operating conditions 4 A 8 A
(DC) according to IEC60065

With rated output signal 10 A 20 A
Rated Output 120 W 240 W
Frequency Response 50 Hz - 15 kHz, -3 ±3 dB
Distortion Less than 1 % at 1 kHz rated output
Signal- to-Noise Ratio More than 60 dB
Tone Control Bass : ±10 dB at 100 Hz, Treble : ±10 dB at 10 kHz
Volume EMG 0 dB to -20 dB
Control Others 0 dB to ∞ (off)
Audio Input INPUT 1-3 Audio MIC : -65 dBV / LINE : -22 dBV (selectable)

Control No-voltage make contact input, open voltage : +5 V DC,

LINE 1,2 -22 dBV, 10 kΩ unbalanced, RCA pin jack x 2 (monaural)

RM Audio RM : -22 dBV / MIC : -65 dBV (selectable) 10 kΩ electronically balanced*

(Remote Control
Microphone

Input) (3) ALL CALL (activation control of all-zone announcement)

TEL PAGING Audio -22 dBV, 10 kΩ electronically balanced*

(Telephone Paging Control

Input) Connector Push-in terminal*

EMG Audio 0 dBV, 10 kΩ electronically balanced

(Emergency Control
Equipment Input) Connector Push-in terminal*

INS IN (Insertion Input) 0 dBV, 100 kΩ unbalanced, RCA pin jack

ZONE 1 CALL IN 100 V or 70 V balanced, M3 screw terminal*

(for 2-channel Announcement)
Audio Output ZONE 1-3, Output Voltage 100 V / 83 Ω (changeable to 70 V / 42 Ω)

DIRECT OUT / Impedance

SP4 Ω Impedance 4 Ω

(Low Impedance Connector M3 screw terminal*
Loudspeaker)

4

(Only INPUT 1) short-circuit current : under 1 mA, Push-in terminal*

Power Supply DC +24 V, 180 mA max. (Up to 4 Remote Microphones [WR-210E] can be connected)
Connector Push-in terminal*

Connector M3 screw terminal*

AC : 110 V - 120 V or 220 V - 240 V (selectable), 50/60 Hz DC : +24 V, M3 screw terminal*

5 kΩ electronically balanced*

No-voltage make contact input, open voltage : +5 V DC, short-circuit current : under 1 mA
(1) CALL (2-channel announcement select) (2) BC (activation control of announcement)

(4) Z1 (zone 1 select) (5) Z2 (zone 2 select) (6) Z3 (zone 3 select)

No-voltage make contact input, open voltage : +5 V DC, short-circuit current : under 1 mA

No-voltage make contact input, open voltage : +5 V DC, short-circuit current : under 1 mA

1

, XLR-3-11 type connector (female)

4

4

4

3

3

Up To Four Remote
Microphones

Up to four (4) WR-210AE remote
microphones can be used to broadcast from
remote locations. These remote
microphones can be used for individual,
group, all-at-once or simultaneous
broadcast.

Program Broadcast

With the optional WU-ZM001E Sound
Message Unit, an SD memory card can be
used to store MP3 data to be broadcast for
a week at specified days and times. The SD
memory card holds 100 messages.

Add Up To 30 Zones

Depending on scale of application systems
may include up to ten (10) WA-MA120N or
WA-MA240N mixing power amplifiers for
expansion to up to 30 zones.

Audio Output LINE OUT 0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack

2

Audio In / Out ALL CALL BUS Audio -20 dBV balanced
for Expansion IN / THRU Control Activation control of all-zone announcement

Call Tone Control Input (CALL SIGN CNT) No-voltage make contact input, open voltage : +5 V DC,
(Activation of built-in call tones) short-circuit current : under 1 mA, Push-in terminal*

Operation On/Off Control No-voltage make contact input, open voltage : +5 V DC,
(OPERATE ON / OFF) short-circuit current : under 1 mA, M3 screw terminal*
Operation Link Control Open collector output, withstand voltage : +30 V DC,
(OPERATE LINK) operating current : under 50 mA, M3 screw terminal*
External Attenuator Control In/Out No-voltage make contact output (transfer type relay),

4

1

1

3

100 V / 42 Ω (changeable to 70 V / 21 Ω)

(ATT OVERRIDE) withstand voltage : 30 V DC, 250 V AC, contact current : under 3 A (DC / AC)

Announcement Priority Control Priority 1 : EMG / Priority 2 : TEL PAGING, INPUT 1 / Priority 3 : RM /
(Input Priority at 1-Channel Announcement) Priority 4 : INPUT 2, 3, LINE 1, 2
Priority Indicator EMG, TEL, RM
Level Meter 5 points, -30 / -20 / -15 / -8 / 0
Other Functions • 2-channel announcement by Remote Microphone or paging microphone.

Phantom Power Supply for INPUT 1-3 +16 V, on / off selectable individually
Power Supply for External Equipment DC +24 V, 0.8 A max., M3 screw terminal*
Cooling Fan 3 modes, Stop / Low speed / High speed
Operating Temperature 0 ºC - 45 ºC
Dimensions 420 mm (W) x 146 mm (H) x 404 mm (D)

Weight (Approx.) 14 kg 15.5 kg
Finish Panel : Gun Metallic painting (ABS Resin)

Accessories AC power cords (x 2), Spare fuses, Rack mounting brackets, Operating instructions
Optional Products • Remote Microphone : WR-210AE / WR-201E

0 dBV = 1 V *1 Can be transformer-balanced with the addition of an optional input transformer.
*2 Barrier distance : 8.12 mm, Suitable cable gauge : AWG 18 ~ 14 (Solid) / AWG 14 (Stranded)
*3 Barrier distance : 6.27 mm, Suitable cable gauge : AWG 22 ~ 14 *4 Suitable cable gauge : AWG 22 ~ 14

Mixing Power Amplifiers

WA-MA120N [120W]
WA-MA240N [240W]

Troubleshooting

The optional WU-ZS001E Surveillance
Unit checks at preset intervals (or 24­hours a day) for overheating and sound
and speaker irregularities.

DIMENSIONS

WA-MA120N / WA-MA240N

420

REC OUT 0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack x 2 (monaural)
INS OUT (Insertion Output) 0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack
INS THRU (Insertion Through Output)
INPUT D-OUT (Input Direct Output)

Connector 9-pin female D-sub connector x 2 (in / through)

Through output from INS IN, unbalanced, RCA pin jack
0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack
(Output for 2-channel announcement from INPUT 1 or RM)

(1) from EMG (2) from TEL / INPUT 1 (3) from RM

4

1:4-Tone (Up), 2:4-Tone (Down), 3:2-Tone (Down)
One-shot make : single playback, at make : repeat playback

M3 screw terminal*

• Zone output extension by connecting plural units. (up to 30 zones by 10 units)

• All-zone announcement in various operating areas. (up to 10 areas)

[Height includes rubber feet and depth includes projections such as rear protect cover.]

Case : brack painting, Munsell N1 or equivalent (steel plate)

• Booster Power Amplifier : WA-BA240N (240W)

3

,

3

3

2

29

132

14 375

Unit: mm

Addition of Booster Power Amplifier enables 2-channel
broadcast with separate transmissions delivered to different zones.

2-channel
Broadcast

For example, a business-related message is transmitted
only to Zone 1 while background music continues to be
played throughout the building. Background music
continues in Zone 2 and Zone 3.

2-channel Broadcast Circuit Diagram

WA-MA120N / 240N

Mixer

Amplifier

BGM

WR-210AE

WA-BA240N

(BGM)

(BGM)

Attention ...

Up to 10 units can be connected to increase capacity to 30 zones.

Add Up To 30 Zones

Each WA-MA120N (or WA-MA240N) can drive three
output channels. As indicated in the diagram on the right,
a system in which a single source drives up to 30 Zones
can be constructed.

Loop through connections using the simultaneous broadcast BUS
I/0 connector allows you to transmit through multiple independent
units to all areas simultaneously.

Broadcast
Simultaneously
To Multiple
Remote Areas

In the illustration to the right, buildings A, B and C are each
equipped with its own Mixing Power Amplifier. Even so, an
emergency message can be transmitted simultaneously to
all three buildings.

ZONE 3

(BGM)

ZONE 2

(BGM)

ZONE 1

(BGM)

ZONE 3 (BGM)

ZONE 2 (BGM)

ZONE 1 (BGM)

WR-210AE

(up to 4 units)

WR-210AE

2-channel Broadcast

ZONE 3

(BGM)

ZONE 2

(BGM)

ZONE 1

(Message)

Attention ...

Message for ZONE 1 only, and BGM continues for ZONE 2 and 3.

1-channel Broadcast

ZONE 3 (BGM)

ZONE 2 (BGM)

ZONE 1 (Message)

Attention ...

Message for ZONE 1 only, BGM is stopped at ZONE 2 and 3.

NO.1(Master)

NO.2

NO.10

building B

building C

building A

WR-201E

(Master)

BUS Line

Background

music

continue

1

2

3

4

5

6

28

29

30

ZONES

WR-201E

5

       

2-channel Broadcast &

Cable Extension

Booster Power Amplifier

WA-BA240N

Output Power : 240W

Input : Line/100V

Output : 100V/70V

This 240W monaural amplifier delivers 100V/70V to drive high-impedance speakers and can also be used with low­impedance speakers and is equipped for both line and 100V input. Addition of this one unit is all that is required for
2-channel broadcast. It can also be used as a booster amplifier in cable extension applications.

Addition of an Booster Power Amplifier permits cable extension to deliver sound to distant locations.

Cable Extension

When you need to broadcast to distant locations, the optional Booster Power Amplifier allows you to extend the
speaker cable as far as necessary.

WA-MA120N

ZONE1

WA-BA240N

WA-MA240N

ZONE2

ZONE3

Major Operating Controls & Terminals

Front/Side

OPERATE indicator

OPERATE switch

SPECIFICATIONS

Model No. WA-BA240N
Power Source AC : 110 V - 120 V or 220 V - 240 V (selectable), 50 / 60 Hz

Power Non-operation mode (standby) 14 W
Consumption Under normal operating conditions 175 W
(AC) according to IEC60065

With rated output signal 680 W
Current Non-operation mode (standby) 0.1 A
Consumption Under normal operating conditions 8 A
(DC) according to IEC60065

With rated output signal 20 A
Rated Output 240 W
Frequency Response 50 Hz - 15 kHz, -3 ±3 dB
Distortion Less than 1 % at 1 kHz rated output
Signal- to-Noise Ratio More than 60 dB
Volume Control LINE IN 0 dB to ∞ (off)
Audio Input LINE IN 0 dBV, 100 kΩ electronically balanced, Tip-Ring-Sleeve (TRS) phone jack

100V Input 100 V balanced*1, M3 screw terminal*
Audio Output LINE THRU Through output from LINE input, balanced, Tip-Ring-Sleeve (TRS) phone jack

SP100 V Output Voltage 100 V / 42 Ω

SP70 V Output Voltage 70 V / 21 Ω

SP4 Ω Impedance 4 Ω

(Low Impedance Connector M3 screw terminal*

Loudspeaker Output)
Operation On/Off Control (OPERATE ON / OFF) No-voltage make contact input, open voltage : +5 V DC,

Operation Link Control (OPERATE LINK) Open collector output, withstand voltage : +30 V DC,

Level Meter 5 points, -30 / -20 / -15 / -8 / 0
Cooling Fan 3 modes, Stop / Low speed / High speed
Operating Temperature 0
Dimensions 420 mm (W) x 146 mm (H) x 394 mm (D)

Weight (Approx.) 15 kg
Finish Panel : Gun Metallic painting (ABS Resin)

Accessories AC power codes (x 2), Rack mounting brackets, Operating instructions

0 dBV = 1 V
*1 Can be transformer-balanced with the addition of an optional input transformer.
*2 Barrier distance : 8.12 mm, Suitable cable gauge : AWG 18 ~ 14 (Solid) / AWG14 (Stranded)
*3 Barrier distance : 6.27 mm, Suitable cable gauge : AWG 22 ~ 14

/ Impedance
Connector M3 screw terminal*

/ Impedance
Connector M3 screw terminal*

PA OUTPUT LEVEL meter

DC : +24 V, M3 screw terminal*

short-circuit current : under 1 mA, M3 screw terminal*

operating current : under 50 mA, M3 screw terminal*

ºC

- 45

ºC

[Height includes rubber feet and depth includes projections such as rear protect cover.]

Case : brack painting, Munsell N1 or equivalent (steel plate)

2

2

3

3

3

3

3

*While there are no restrictions on attaching a WA-BA240N
to your network, sound quality may deteriorate at distant
locations.

Back

LINE THRU jack LEVEL knob

LINE IN jack

Cooling fan

ADJUSTING INPUT VOLUME

(WA-MA120, MA240, etc.)

for High-Impedance Loudspeakers

Pre-amplifier, etc

Line-level equipment, etc.

DIMENSIONS

WA-BA240N

WA-BA240N

VOLTAGE SELECTOR switch

100V, 0V terminals

Audio/operation on/off control in/out terminals DC +24 IN terminals

Power Amplifier

POWER switch AC power supply inlet

100 V OUT

LINE OUT

29

132

420

14 365

LEVEL Knob

Unit: mm

Program Broadcast

For regularly repeated messages.

Sound Message Unit

WU-ZM001E

Inserted into the main unit, the Sound Message Unit allows
up to 100 messages to be broadcast at regular intervals
from Monday to Sunday. Timing and message content can
be fine tuned with programs with up to 999 steps from a
Personal Computer.

Register sound files to MSG Register steps to a schedule pattern

DIMENSIONS

WU-ZM001E

Assign schedule pattern to
weekly schedule

MESSAGE EMG
2

12

31

MENU ENTER

CANCEL

PHONES LEVELREC

SCHEDULE

RESET

CLK ADJ.

SD CARD

194
206

45

PHONESREC IN

WU-ZM001

(8)

22.5

Troubleshooting

For regular maintenance

Surveillance Unit

WU-ZS001E

*The lamp that signals amp or speaker circuit
anomalies is located on the front.

Inserted into the main unit, the
Surveillance Unit tests at preset
intervals for internal amplifier
problems and speaker circuit
anomalies (short circuits, breaks,
grounding) and lights a warning LED
if problems are detected. Since the
cause is known immediately, repairs
can be undertaken immediately.

DIMENSIONS

WU-ZS001E

808153

150

Unit: mm

123

Unit: mm

WU-ZM001E in WA-MA240N

SPECIFICATIONS

Power Requirements

Frequency characteristics

Distortion factor
Audio signal input and
output

MSG Control Input/Output

Controls

Storage media

Audio signal format

Scheduled announcements

Emergency message

Setting support software

Operating temperature range
Dimensions
Weight (Approx.)
Finish

Rated Voltage
Consumption Current
Line system
Microphone system

Recording input
[REC IN]

Monitor output
[PHONES]

EMG1 message execute
input [EMG1]
EMG2 message execute
input [EMG2]
Regular announcement
execute input [MSG]
Clock compensation input
[CLK ADJ.]
Emergency message
Regular announcements
Menu controls

Volume adjustment

Playback

Recording

SPECIFICATIONS

Power
Requirements
Fault
Detection

Indicator
Operation

Other I/F

Ambient Temperature

Dimensions
Weight (Approx.)

Rated Voltage
Consumption Current
Line

Amplifier

SW

LED

SW

Parallel

Time Adjustment

24 V DC (supplied internally by amplifier)
Approximately 220 mA
50 Hz to 15 kHz ±2 dB
100 Hz to 10 kHz ±2 dB
1 % or less (1 kHz standard)
Input level: Microphone -65 dBV/Line -12 dBV alternating, input level is
adjustable
Input impedance: 10 KΩ unbalanced
S/N quotient: 70 dB or higher (Line)
Monaural: 3.5 ø mini-jack
Output level: -12 dBV, output level is adjustable
Output impedance: 32 Ω unbalanced (load impedance: 32 Ω or higher)
S/N quotient: 70 dB or higher
Stereo: 3.5 ø mini-jack
Open voltage +5 V DC ; Short circuit current 1 mA
(on back of Amplifier)
Open voltage +5 V DC ; Short circuit current 1 mA
(on back of Amplifier)
Open voltage +5 V DC ; Short circuit current 1 mA
(on back of Amplifier)
Open voltage +5 V DC ; Short circuit current 1 mA
(on back of Amplifier)
EMG 1-2 switches [EMG1] and [EMG2]
MESSAGE 1-3 switches [MESSAGE1-3]
LCD: 16 characters x 2 lines
MENU switch [MENU], ENTER switch, CANCEL switch [CANCEL],
SELECT dial [SELECT], SCHEDULE switch [SCHEDULE], CLK ADJ
switch [CLK ADJ.]
REC knob [REC]
PHONES knob [PHONES]
LEVEL knob [LEVEL]
SD memory card (Panasonic cards are recommended)
*Up to a maximum of 2 GB
WAV format: 44.1 kHz, 16 bit, MONO
MP3 format: 44.1 kHz, 128 kbps, STEREO
* STEREO audio signals are played back mixed on both channels.
WAV format: 44.1 kHz, 16 bit, MONO
* Maximum continuous recording time is 10 minutes.
Schedule pattern assigned to day of the week
9 types of schedule patterns
999 steps possible for each pattern
100 types of messages or combined messages can be set for each
step
2 types of messages, EMG1 message and EMG2 message can be
written to the internal memory
Each message has a signal tone (10 seconds) and a message (20
seconds)
Computer software provided (compatible with Windows 2000 and XP)
Supported languages: English and Simplified Chinese
0 ˚C to +40 ˚C
206 mm (W) x 45 mm (H) x 130 mm (D) * Excluding protrusions.
665 g
Panel: Gun metal coating

24V DC (supplied internally by amplifier)
Approximately 100 mA
Short (When impedance is -50 % of reference
impedance value)
Disconnect (When impedance is +50 % of reference
impedance value)
Grounding (When ground impedance value is 50 kΩ
or less)
Audio fault (When audio that is greater than the pilot
signal level cannot be detected by the amplifier circuit.)
Abnormally high temperature (When transformer
temperature is +100 ˚C or greater)
Speaker line check trigger/Impedance reference
value acquisition trigger
Impedance reference value setting/Speaker line
check status indicator (amber/green)
Line short/disconnect indicator: ZONE 1-5 (red/amber)
GROUND FAULT indicator (red)
Line check trigger/Impedance reference value
acquisition trigger
External I/F
Input 2 (Tr input): Open circuit voltage 5 V; Short cir­cuit current 1 mA Output 17 (open collector output):
No-voltage make contact, control voltage 30 V max.,
control current 50 mV max. Connector: D-sub 25-pin
Input (Tr input): Open circuit voltage 5 V; Short cir­cuit current 1 mA
Rated Temperature: +5 ˚C to +35 ˚C
Operating Temperature: 0 ˚C to +45 ˚C
150 mm (W) x 18 mm (H) x 88 mm (D)
80 g

6

7

OPTIONAL COMPONENTS & ACCESSORIES

Remote Control Microphone

WR-210AE

• This Remote Microphone is designed for

use with public address (PA) systems. It
supports both separate zone
announcement (10 broadcasts) and all­zone announcement capabilities.

DIMENSIONS

WR-210AE

360 50

Panasonic

Remota Microphone WR-210A

5

4

3

2

1

SPECIFICATIONS

General

Power Supply
Ambient Temperature
Dimensions

Weight

Unit: mm

250

BUSY ON AIR

OPERATE

LINE ALL CALL

10

9

8

7

6

CALL

SING

MIC ANNOUNCE

50 (5)

155

46 (5)

Finishing

Audio-signal Input/Output

Frequency Characteristic
Distortion
Microphone Input

S/N Ratio
LINE IN

S/N Ratio
Audio Output

Record Output

Control Output (Quick connection terminal panel)

Control Capacity
Announcement Control
Zone Control
All-Zone Control
Call Sign Control
Priority Control

Other

Operation Buttons
Indicators
Extension I/F Connector

24 V DC, 45 mA or less (connection terminal)
0 °C - +45 °C
250 (W) mm x 55 (H) mm x 155 (D) mm (excluding projections and flexible
microphone)
Approx. 740 g {1.63 lbs}
Top case : OA ivory color (Munsell value 5.5Y7.5/0.3 approximate color)
Bottom case: Gray color (Munsell value N5.5 approximate color)

Line: 50 Hz-15 000 Hz -3±2 dB
1 % or less (at 1 000 Hz)
Unidirectional ECM microphone length: 350 mm
Input Sensitivity: -49 dBV (-44 dBV at factory)
50 dB minimum

ø

6.3 mm tip sleeve phone jack unbalanced
Input Sensitivity: -12 dBV (-2 dBV at factory)
Input impedance 10 kΩ
70 dB minimum
Connection terminal H,C, COM (0 V) balance
Output Level:0 dBV, matching load impedance 600 Ω

ø

6.3 mm tip sleeve phone jack unbalanced
Output Level:0 dBV, matching load impedance 10 kΩ

Max: 30 V DC, 80 mA DC
1 channel
1-10 channel
CK0 one channel
Rising, falling, 1 channel each
Priority input, priority output 1 channel each

Individual, microphone, channel, all-zone, call sign up/down, announce
OPERATE, ON AIR, BUSY
1

Remote Microphone

WR-201E

• Designed the MIC and LINE buttons allow
you to select mic audio or line audio for
announcement.

DIMENSIONS

WR-201E

360 50

107

Panasonic

Remota Microphone WR-210E

155

Unit: mm

50 (5)

46 (5)

SPECIFICATIONS

General

Power Supply
Ambient Temperature
Dimensions

Weight
Finishing

Audio-signal Input/Output

Frequency Characteristic
Distortion
Microphone Input

S/N Ratio
LINE IN

S/N Ratio
Audio Output

Call Sign

Control Output

Announcement Control
Call Sign Control

Other

Operation Buttons
Indicators

24 V DC, 45 mA or less(connection terminal)
0 °C - +45 °C
107 (W) mm x55 (H) mm x155 (D) mm
(excluding projections and flexible microphone)
Approx. 400 g
Top case : OA ivory color (Munsell value 5.5Y7.5/0.3 approximate color)
Bottom case: Gray color (Munsell value N5.5 approximate color)

Line : 50 Hz-15,000 Hz ±3 dB
1 % or less (at 1 000 Hz)
Unidirectional ECM microphone
Input Sensitivity : -49 dBV (-44 dBV at factory)
50 dB minimum

ø

3.5 mm stereo mini jack
Input Sensitivity : -12 dBV (-2 dBV at factory)
Input impedance 10 kΩ
70 dB minimum
Connection terminal H,C, balance
Output Level : 0 dBV, matching load impedance 600 Ω
2-tone signal

1 channel, connection terminal, max DC 30 V, DC 20 mA
1 channel

Microphone line, call sign
OPERATE, ON AIR

Trademarks and registered trademarks

– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

Important

– Safety Precaution: carefully read the operating instructions and installation manual before using this product.

DISTRIBUTED BY:

• All TV pictures are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• These products may be subject to export control regulations.

http://panasonic.net/pss/pa/

Printed in Japan (1N-750C)