Panasonic VW-BN2PP User Manual

Operating Instructions

DVD Burner

Model No. VW-BN2PP

Before connecting, operating or adjusting this product, please read the instructions completely.

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assi stan ce, please call: 1-800-561-55 05 or visit us at www.panasonic .c a

LSQT1571 A

Things You Should Know

Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your DVD Burner. Be sure to retain this manual as your convenient unit information source.

¬ Information for your safety

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUC T THE VENTILATION VENTS.

THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

LSQT1571 (ENG)

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

VW-BN2PP

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desi gned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, us es, and can ra diate rad io frequ ency energ y and, if not ins talled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whic h can be determin ed by t urnin g the equ ipmen t off and on, the us er is encouraged to try to correct the interference by one or more of t he following measures:

≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from th at to which the receiver

is connected.

≥ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the attached installation instructions

and use only shielded interface cable when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to opera te this equipment.

This device complies with Part 15 of t he FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause har mful interfe rence, and (2) this device mus t accept any interference received, including interf erence that may cause undesired operation.

Declaration of Conformity Trade Name: Panasonic Model No.: VW-BN2PP

Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

LSQT1571(ENG)

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V. But ≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power

supply only.

≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug

adaptor to suit the AC outlet configuration.

≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is

suited to the voltage of the AC supply and the rated current of the AC adaptor.

≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug

adaptor or AC cord set.

Product Identification Marking is located on the bottom of units.

-If you see this symbol-

Information on Disposal in other Countries out s ide the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

LSQT1571 (ENG)

(Inside of product)

¬ Contents

Information for your sa fety ............... ....2

Features..................................................5

Before use.................... ............. ............ ..5

About the disc........................................6

Accessories............................................8

Parts identificat ion and handling.........8

Power supply........................................ ..9

Inserting/removing a disc.......... ............9

Copying from a Camcorder to a DVD

disc....................................................10

Playing back a copied DVD disc on a

Camcorder........................................11

Connec t in g t o a P C.............................11

Cautions for Use ..................................13

Troubleshooting...................................15

Specifications.......................................17

Request for Service Notice (USA and

Puerto Rico Only).............................18

Limited Warranty (United States and

Puerto Rico)...................... ............ ....19

Customer Services Directory (United

States and Puerto Rico) Warranty (For Canadian Customers)

.....................21

..... 22

¬ Features

≥

This is a portable device with a thin, lightweight and compact design. If you connect this unit and a compatible Panasonic Camc order, th en the mo tion video/pictures recorded on the connected Camcorder can be easily copied to a DVD disc even at your travel destination.

≥ You can also play back DVD discs

created on this unit if you connect this unit and a compatible Panasonic Camcorder.

≥ If you connect this unit and a PC

using the supplied compatible Panasonic Camcorder, you can copy edited on a PC etc. to a DVD disc.

≥

Operation i s not guar anteed f or a ny kin d of

uses other than these mentioned above.

USB cable with a

motion video/pictures

¬ Before use

∫ Handling this unit

This unit is a high-precision device that is not built to withstand vibration, shock or dust. Depending on the environment and handling of the unit, some content may be damaged and in the worst case reading the disc may no longer be possible. In particular, do not subject this unit to vibration and/or shock or disconnect the AC cable during use. ≥ Panasonic will not be liable for any

damages sustained directly or indirectly from the use or failure of this product. Panasonic will also not be liable for any losses of data caused by this product.

≥ Injury or material damage resulting

from any kind of use that is not in accordance with the operating Instructions are the sole responsibility of the user.

∫ When placing this unit

Place this unit on a flat, level surface while using it.

≥ You cannot use this unit if it is placed

vertically.

∫ Carefully observe copyright laws

Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights.

∫ Pages for reference

Pages that you should refer to are shown as (P00).

LSQT1571(ENG)

≥ Microsoft®, Windows®, Windows Vista®

and DirectX trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

≥ IBM and PC/AT are registered

trademarks of International Business Machines Corporation of the U.S.

≥ Intel

are registered trademarks or trademarks of Intel Corporation in the United States and other countries.

≥ Microsoft product screen shot(s)

reprinted with permission from Microsoft Corporation.

≥ Other names of systems and products

mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned.

are either registered

, Core™, Pentium® and Celeron®

¬ About the disc

∫

Discs that can be used on this unit

Discs that can be used for copying when you connect this unit to a compatible Panasonic Camcorder are 12 cm (5z) non-cartridge type DVD-RAM, DVD-RW, DVD-R, DVD-R DL (dual layer on single side), +RW, +R, +R DL (dual layer on single side), CD-RW and CD-R.

≥ The discs that can be used with this

unit will differ depending on the Camcorder that is connected. Read the operating instructions of the Camcorder for details.

Import an t N o tice

If you copy motion video recorded in AVCHD format to a disc, do not insert this disc in the devices which do not support AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on the devices that do not support AVCHD format.

≥ You cannot record or play continuously

from one side of the disc to the other when using a double sided disc. You will need to eject the disc and turn it over.

≥ Discs inserted in a holder, cartridge, or

caddy case cannot be used. Always remove bare discs from these containers prior to use.

LSQT1571 (ENG)

≥ It is recommended that you use

Panasonic discs. Usually discs compatible with the DVD standard can be used for recording and playback with no problems. However, some commercially available discs do not meet the DVD standard for quality and performance. If you use one of these discs, you may not be able to record or play back normally.

≥ Discs recorded on this unit may not

be playable on other products. In

such cases, play back the disc on this

unit instead. ≥ When using DVD-RW, DVD-R, DVD-R

DL, +RW, +R or +R DL do not perform

the following as it may make the disc

unusable.

–Record on a disc with other products

after recording on it with this unit.

–Record on a disc with this unit after

recording on it with other products.

–Insert an un-finalized disc in any other

products.

∫ About DVD-R DL/+R DL

DVD-R DL or +R DL discs have two layers of recording and playback surface on one side. If a scene does not fit on the first layer (L0), recording continues on the second layer (L1) so one scene is recorded across two layers. This unit automatically switches layers during disc playback so you can play the whole disc continuously like a normal disc. However, the image or the sound may momentarily stop at the point where the layers switch.

∫ Examples of discs that c annot be

used on this unit

≥ Discs other than those with a 12 cm (5z)

diameter (You cannot use 8 cm (3z)

discs even if you insert them in a

commercially available adaptor.) ≥ 6X–12X high speed recording

compatible DVD-RAM

≥ BD media, etc. ≥ HD DVD media, etc.

∫ How to hold a disc

Do not touch the recorded surface.

∫ When inserting/removing a disc

Do not allow fingerprints or dirt to get on the recording/playback side of the disc. ≥ If there are scratches or dirt (e.g. dust or

fingerprints) on the recording/playback side of the disc, normal recording/ playback may not be possible and the following may occur: –Recording/playback is not possible. –The image or the sound is interrupted

or stops momentarily.

–Noise may appear on the image and/or

the sound.

∫ If there is dirt on the disc

≥ Clean it with the commercially available

disc cleaning cloth. Wipe the disc from the center to the outer edge to remove the dirt. Do not use force when wiping the disc as it may scratch it. Also, do not use solvents (thinner, water, antistatic agent, detergent etc.).

LSQT1571(ENG)

∫ Handling precautions

23 41

≥ Be careful about scratches and dirt. ≥ Do not attach labels or stickers to discs.

(This may cause disc warping and un-balanced rotation, rendering it unusable.)

≥ Write on the label side of the disc only

with a soft, oil-based felt pen. Do not use ballpoint pens or other hard writing implements.

≥ Do not use record cleaning sprays,

benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Do not use scratch-proof protectors or

covers.

≥ Do not drop, stack, or impact discs. Do

not place objects on them.

≥ Do not use the following discs:

–Discs with expose d adhesive from

removed stickers or labels.

–Dis cs that are badly warped or

cracked.

–Irregularly shaped discs, such as heart

shapes.

≥ Do not place in the following areas:

–In direct sunlight. –In very dusty or humid areas. –Near a heater. –Locations susceptible to significant

difference in temperature (condensation can occur).

–Where static electricity or

electromagnetic waves occur.

≥ To protect discs, return them to their

cases when you are not using them.

¬ Accessories

Check the accessories before using this unit.

AC adaptor

VSK0691

AC cable

K2CA2CA00029

K2CA2CA00025

Mini AB USB Connectio n C a ble

K2KZ59B00002

¬ Parts identification and

handling

1 Eject button [<] 2 Access lamp [ACCESS] (P10) 3 Disc insertion slot 4 Power lamp [POWER] 5 USB terminal [ ] 6 DC input terminal [DC/C.C.IN 5.0 V]

≥ Do not use any other AC adaptors

except the supplied one.

LSQT1571 (ENG)

+ 16 hidden pages