Panasonic VW1 User Manual

Page 1
Expand Your Factory Radio
add
add
iPod
iPod
®
®
R
VW1 Owner’s Manual
Neo Gateway
Page 2
Table of Contents
Pages
1. Introduction 1
2. Precautions 1
3. Compatibility Notes 1
4. Dipswitch Settings 2
5. Installation 2
6. iPod Operation 4
Panasonic Radio Operation Delphi Radio Operation
7. HD Radio Operation 6
(if equipped)
Panasonic Radio Operation Delphi Radio Operation
8. Selecting AUX Input 7
9. Selecting Factory Satellite 7
(if eqipped)
10. Troubleshooting 8
11. Warranty Information 9
Page 3
Neo Gateway & Optional Add-ons
Factory Radio
Not Included
iPod
Not Included
Neo Gateway Harness
Neo Gateway
11Ft. iPod Cable
Antenna Adapter
* Required for most vehicles. (sold seperately)
HD Radio
3Ft. HD Radio Cable
TM
Tuner
Page 4
1. Introduction
Thank you for purchasing the ® Neo Gateway. The Neo Gateway is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your HD Radio tuner or iPod performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the Neo Gateway. The Neo Gateway allows connectivity for iPod and HD Radio (HDRT sold separately), enabling full control of these devices from the factory installed radio. It also retains original system features such as Satellite Radio (if equipped).
2. Precautions
UPDATING iPod FIRMWARE
For proper operation of the Neo Gateway, your iPod must be updated with the
most recent version of rmware from Apple. This is done on your computer.
To update the software on the iPod go to: http://www.apple.com/ipod/download/. Follow the directions on the website to complete the download. There is no charge for this update.
PREVENTING DAMAGE TO YOUR VEHICLE OR iPod.
Some installations require you to make wiring connections. To eliminate the risk of an electrical short, we recommend disconnecting the vehicle’s battery prior to installation. If you do not feel comfortable making these connections, we suggest you seek professional installation. We recommend that the iPod be disconnected from the interface when the vehicle is not in use.
PROPER MOUNTING LOCATION
Securely install the interface in a location free from; heat, humidity, moving parts, sharp metal edges or direct sunlight. We recommend securing the interface to a suitable location using; double sided tape, VelcroTM or zip-ties.
3. Compatibility Notes
2006-2008 VW Jetta, Rabbit, Passat, Eos, and GTI
Radio must be Non-Navigation and have a button labeled “SAT” to be
compatible
1
Page 5
4. Dipswitch Settings
After removing the radio from the vehicle, identify the manufacturer of the
radio. Two companies make the radios featured in these VW vehicles. If the model number sticker is on the side of the radio it is a Delphi brand radio. If the model number sticker is on the top of the radio it is a Panasonic brand radio.
For Delphi radios all dip switches must be in the OFF position (up) for the Neo Gateway to function.
For Panasonic radios only dipswitch #2 needs to be turned ON (down), the rest must be OFF (up) for the Neo Gateway to function.
5. Installation
Before installing the Neo Gateway, be sure you have correctly set the dipswitches according to section four.
NOTE: DO NOT disconnect the wiring from the “passenger airbag light” on the dash bezel. Disconnecting this harness will cause an airbag light to illuminate in the gauge cluster which needs to be reset by a Volkswagen dealership.
1. When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation.
2. Carefully remove the radio from the dash of the vehicle. We recom­mend the use of Part # GET (when applicable) to remove the radio from
the dash. These tools are specically designed to be used to remove
Volkswagen radios. This will provide access to the factory radio connec­tors where you will connect the Neo Gateway harness.
3. Disconnect the factory harness from the back of the radio. Disconnect the antenna connector from the radio.
4. Connect the 8-Pin iPod docking cable into the rst port on the Neo
Gateway furthest away from dipswitches. Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example; the glove box or center console). This location
2
Page 6
may vary based on the vehicle, and customer’s preference. When running this cable through the dash, be sure to secure it away from moving parts or sharp metal edges that may damage the cable.
5. If connecting the HD Radio tuner (HDRT sold separately) Plug the 3 foot HD Radio cable (8-Pin mini-din to 8-Pin mini-din) into the second port (closest to the dipswitches) on the Neo Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the factory WHITE antenna cable into the antenna connection on the HD Radio tuner (HDRT). For
best performance of the HDRT use an amplied antenna adaptor to make this connection. We recommend the use of a Best Kits BAADIN22
or equivalent. If the Tan connector is connected into the HDRT it will not
receive any AM reception.
6. Plug the male connector on the VW1 harness into the port on the back of the radio. Next, connect the factory harness into the female connector
on the VW1 harness. Be sure to make a rm connection but do not force it. Plug the black micro-t 24-pin connector on the VW1 harness into the
Gateway Neo Gateway box.
7. To complete the installation secure the Neo Gateway (Gateway) and HD Radio tuner (HDRT) into the cavity behind the dash. Be sure that the cables and interface modules are not near moving parts or sharp metal edges as they may damage the cables. To prevent rattling noises inside the dash, use zip ties, or electrical tape, or other fasteners to mount the interfaces to the factory wiring or installed audio components (for example under the factory Satellite tuner (if present).
8. With all connections made, reconnect the vehicle’s battery, insert the key into the ignition, and turn the vehicle on. Check for proper operation of the Neo Gateway and HD Radio tuner before reinstalling the factory dash panels.
9. When rst powering up the vehicle with the radio reconnected, “CODE”
may appear on the screen. This is a safety feature of the VW radio. If you see this message, DO NOT enter a code, simply let the radio sit on this screen for about 10 seconds, then turn the vehicle off. Disconnect the gateway harness from the vehicle. Reconnect the gateway harness to the vehicle. Normal operation should resume.
10. NOTE: The rst time that you access the Gateway, your radio may display “DEV INIT” while the device is initializing. If this is displayed, please wait one minute the cycle the ignition off and on. Access “SAT”
mode again to begin normal gateway operation.
3
Page 7
6. iPod Operation
The Neo Gateway is accessed by pressing the “SAT” button to switch the
radio to the Satellite radio source. In the Satellite Radio source, you will
have access to all the available Neo Gateway sources. Press the “CAT FLDR” button, ▲ or ▼ button to cycle through the Neo Gateway sources. (AM, FM, IPOD, AUX input, SAT) when the desired option is displayed on
the screen, wait 3 seconds and the radio will select the displayed option.
Press the “CAT FLDR” or “▲” button until “IPOD” is displayed. Wait 3 sec­onds, the radio will automatically enter the iPod mode.
PANASONIC Radio Controls
Next Track
Turn the Tune knob Clockwise to skip to the next track.
Previous Track
Turn the Tune knob Counter-clockwise to go back to the previous track.
Enter Browse menu / make a selection
To enter the Browse menu, press in the tune knob. While in the Browse
menu press the “CAT FLDR” or “▲” “▼” buttons to cycle through Browsing options. (Playlist, Artist, Album, Genre and Composer) when the desired
Browsing method is displayed, press in the tune knob to select that option.
When the radio displays “TR:” you are about to select a track to play, when
you press in the tune knob and select a track, the iPod will play that song through the audio system.
Menu back
Press “Seek ▼” to move back one folder in the menu. This allows you
to change the Browsing method. For example if you select to Browse by
album, and you decide to Browse by artist instead, press the “SEEK ▼”
button to go back.
Panasonic Steering Wheel controls
The Multifunction display in the gauge cluster must be in “Audio mode” for
the steering wheel controls to operate the Neo Gateway.
Next track
Press the “▲” button on the SWC to advance to the next track.
Previous track
Press the “▼” button on the SWC to go back to the previous track.
Enter Browse menu / make a selection
4
Page 8
Press the “OK” button on the SWC to enter the Browse menu. Press “OK”
to select the displayed option in the Browse menu.
While in the Browse menu, change your browsing method by pressing the
“▲” and “▼” buttons on the steering wheel controls.
Delphi Radio Controls
Next Track
Turn the Tune knob Clockwise to skip to the next track.
Previous Track
Turn the Tune knob Counter-clockwise to go back to the previous track.
Enter Browse menu / make a selection
To enter the Browse menu, press Preset # 2. While in the Browse menu
press the “CAT FLDR” or “▲” “▼” buttons to cycle through Browsing options. (Playlist, Artist, Album, Genre and Composer) when the desired
Browsing method is displayed, press Preset # 2 to select that option.
When the radio displays “TR:” you are about to select a track to play,
when you press Preset # 2 and select a track, the iPod will play that song through the audio system.
Menu back
Press Preset # 1 to move up one folder in the menu. This allows you to change the Browsing method. For example if you select to Browse by album, and you decide to Browse by artist instead, press Preset # 1 to go back.
Exit Browse Menu
Press Preset # 3 to exit the Browse menu and continue playing the current song.
Rewind
Press Preset # 5 to fast forward, press Preset # 5 again to play.
Fast Forward
Press Preset # 6 to fast forward, press Preset # 6 again to play.
Random modes
Press Preset # 4 to toggle between the random modes (Song, Album, Off.)
7. HD Radio Operation
5
Page 9
(if equipped)
Press the “CAT FLDR” or “▲” button until “HD-AM” or “HD-FM” is dis­played. Wait 3 seconds, the radio will automatically enter the HD Radio mode.
PANASONIC Radio Controls
Seek Up
Press the ”SEEK▲” button to seek up to next available station.
Seek Down
Press the ”▼SEEK” button to seek down to the next available station.
Manually Tune
Turn the Tune knob to manually tune. Clockwise will tune up, Counter­clockwise will tune down.
Storing stations into preset memory
Press in the tune knob to access the preset memory menu.
Use the “CAT FLDR” button to cycle through the preset locations (1-18FM, or 1-6 AM)
Press in the tune knob to store the current station into the location dis­played on the radio, for example PRE1.
Recall a station from preset memory
Press in the tune knob to access the preset memory menu.
Use the “CAT FLDR” button to cycle through the preset locations. When
the desired preset is displayed, wait 3 seconds, the radio will auto select the station.
Panasonic Steering Wheel controls
The Multifunction display in the gauge cluster must be in “Audio mode” for
the steering wheel controls to operate the Neo Gateway.
Seek Up
Press the “▲” arrow on the steering wheel controls to seek up.
Seek Down
Press the “▼” arrow on the steering wheel controls to seek down.
Storing stations into preset memory
Press “OK” access the preset memory menu.
Use the “▲” and “▼” buttons to cycle through the preset locations (1-18FM, or 1-6 AM)
Press “OK” to store the current station into the location displayed on the
radio, for example PRE1.
6
Page 10
Recall a station from preset memory
Press “OK” to access the preset memory menu. Use the “▲” and “▼” buttons to cycle through the preset locations. When
the desired preset is displayed, wait 3 seconds, the radio will auto select the station.
Delphi Radio Controls
Seek Up
Press the ”SEEK▲” button to seek up to next available station.
Seek Down
Press the ”▼SEEK” button to seek down to the next available station.
Manually Tune
Turn the Tune knob to manually tune. Clockwise will tune up, Counter­clockwise will tune down.
Storing stations into Preset memory
Tune to a station you wish to save into Preset memory. Press and hold the Preset button (1-6) where you want to store the preset. Holding the preset button for two seconds will store the station into memory.
Recall a station from Preset memory
Press the preset button (1-6) to recall the station stored in that location.
8. Selecting AUX
Press the “CAT FLDR” or “▲” button until “AUX” is displayed. Wait 3 sec­onds, the radio will automatically enter the Auxiliary audio input mode.
9. Selecting Factory Satellite Radio (if equipped)
Press the “CAT FLDR” or “▲” button until “SAT” is displayed. Wait 3 sec­onds, the radio will automatically enter the Satellite Radio mode.
For instructions on the operation of the factory installed Satellite Radio tuner, please reference the owner’s manual supplied with the vehicle.
NOTE: when in Factory Satellite radio mode, to change to another source,
iPod, HD Radio, etc. Press in the Tune knob twice (2X) then use the “CAT FLDR” or “▲” and”▼” buttons to cycle through the available Neo Gateway
sources.
7
Page 11
10. Troubleshooting
Symptom Cause Remedy
Radio shows iPod not connected
iPod cable is not connected to iPod or Gateway.
Verify the docking cable is connected to the Neo Gateway, and the iPod
I can not correctly control the iPod through the radio.
I have updated my
iPod’s rmware
and still have control issues
I don’t see iPod artist or song information on the screen
I can’t use my iPod’s click wheel to select music
The Neo Gateway does not recognize the HD Radio tuner (HDRT)
Radio shows
“DEV INIT”
When I listen to
the factory AM or
FM radio there is only static, no audio.
No AM or FM
reception using the HD Radio source
HD Radio station
quality uctuates
or is lost randomly
I receive FM but
no AM stations
The iPod rmware may be out of date.
Sometimes the iPods needs to be reset
The radio is displaying a different
text eld
The iPod is in external control mode. This allows text to be displayed on the radio screen
The HD tuner was not properly connected when the Gateway was
rst connected and
initialized.
Gateway device is initializing
Factory antenna cable is connected to the HD Radio tuner.
Factory antenna cable is not connected to the HD Radio tuner (HDRT)
The HD Tuner is temporarily losing reception of the Digital HD Radio broadcast signal
Poor antenna connection
Update iPod rmware for free at http://www.apple.com/ipod/download
Press and hold the click wheel (center button) and the menu button for 10 seconds. This will reboot the iPod.
YOU WILL NOT LOSE MUSIC on the
iPod by doing this reset
Press the Text / Scan button to see text
Press the Aux / Sat button and select AUX 2 source to control the iPod
manually using the click wheel
HDRT must be connected before the Gateway is powered on. Disconnect the Gateway from the vehicles harness for 5 minutes. Verify the 8 pin DIN HDRT cable is securely connected at both ends before reconnecting the vehicle harness.
This only occurs the rst time the
Gateway is powered on. Wait one minute, cycle ignition off and on then
enter SAT Mode.
Use Gateway to access HD Radio source. This will provide all AM and
FM reception for your vehicle.
Remove from factory radio, connect into HDRT module. Note* We
recommend a Best Kits BAADin22
This is expected performance. The Digital HD Radio playback will resume in areas of higher broadcast signal strength.
Verify that the WHITE antenna connector is connected to the HDRT,
using a BAADin22 or equivalent
adapter.
8
Page 12
11. Warranty Information
One Year Limited Warranty
The quality controls used in the manufacture of this product will ensure your sat­isfaction. This warranty applies only to the original purchaser of this product from an authorized Elecronics dealer. This warranty covers any supplied or manufac­tured parts of this product that, upon inspection by authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses. Attempting to service or modify this unit, op­erating this unit under conditions other than the recommended voltage will render this
WARRANTY VOID. Unless otherwise prescribed by law, shall not be liable for any personal injury, property
damage and or any incidental or consequential damages of any kind (including water dam­age) resulting from malfunctions, defects, misuse, improper installation or alteration of this
product. All parts of this product are guaranteed for a period of 1 year as follows: Within the rst 12 months from date of purchase, subject to the conditions above, will repair
or replace the product at their discretion, if it is defective in material or workmanship provid-
ing it is returned to an Authorized Neo Car Audio Dealer, with PROOF OF PURCHASE from
an authorized Elecronics dealer.
Warning:
This equipment may be reset by unintentional electrostatic discharge during operation. Ex­posure to direct sunlight or extreme heat may cause damage or malfunction.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener­ates, uses, and can radiate radio frequency energy and, if not installed and used in ac­cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recption, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorientate or relocate the receiving antenna.
2. Increase the separation between the equipment and reciever.
3. Connect the equipment into an outlet on a circuit differant from that of which the reciever is connected.
4. Consult the dealer or an experienced radio / television technical for help.
Notice : The changes or modications not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
Loading...