Panasonic TY-WK5P1SW User Manual

Fitting Instructions

Plasma TV wall-hanging bracket (Vertical mounting type)

Before commencing work, carefully read these Instructions and the Manual for the plasma TV
to ensure that fitting is performed correctly.
(Please save these instructions. You may need them when maintaining or moving the
bracket.)

English

Anleitung zur Anbringung

Wandhalterung zum Anbringen des Plasma-Fernsehers (Typ für vertikale Anbringung)

Vor der Ausführung lesen Sie bitte diese Anleitung und die Bedienungsanleitung für das
Plasma-Fernseher sorgfältig durch, damit die Anbringung richtig ausgeführt wird.
(Bitte bewahren Sie diese Anleitung auf. Sie kann bei der Wartung oder der erneuten
Anbringung der Halterung benötigt werden.)

Deutsch

Montage-instructies

Muurbevestigingssteun voor plasmatelevisie (voor verticale montage)

Lees deze installatiehandleiding en de bedieningshandleiding voor de plasmatelevisie zorgvuldig
door voordat u begint, zodat de montagewerkzaamheden op de juiste wijze worden uitgevoerd.
(Bewaar deze handleiding. U hebt de handleiding weer nodig wanneer u de
bevestigingssteun verwijdert of verplaatst.)

Nederlands

Istruzioni per il montaggio

Supporto per il montaggio a parete del televisore al plasma (tipo per montaggio verticale)

Prima di iniziare il montaggio leggere attentamente queste istruzioni ed il manuale dello
televisore al plasma per poter procedere al montaggio in modo corretto.
(Conservare poi queste istruzioni che si renderanno necessarie per la manutenzione e
l’eventuale spostamento della staffa.)

Italiano

Instructions de montage

Applique de fixation au mur du téléviseur à plasma (type pour montage vertical)

Avant de commencer le travail, lisez attentivement ces instructions ainsi que le mode
d’emploi de téléviseur à plasma de manière à réaliser un montage convenable.
(Conservez soigneusement les présentes instructions. Vous pouvez en avoir besoin pour
effectuer un entretien ou si vous désirez déplacer l’applique.)

Français

Instrucciones de instalación

Soporte para colgar el televisor de plasma en una pared (Tipo de montaje vertical)

Antes de empezar el trabajo, lea atentamente estas instrucciones y el manual de el televisor
de plasma para asegurar una instalación correcta.
(Guarde estas instrucciones. Podrá necesitarlas cuando haga trabajos de mantenimiento o
mueva el soporte.)

Español

Instruções de montagem

Suporte de instalação na parede do televisor com ecrã de plasma (Montagem vertical)

Antes de começar a trabalhar, leia com atenção estas instruções e o manual do televisor com
ecrã de plasma, para ter a certeza de que a montagem é feita correctamente.
(Guarde estas instruções. Pode precisar delas quando fizer a manutenção ou deslocar o
suporte.)

Português

Monteringsanvisningar

Väggupphängningshållare för plasmatelevision (vertikal monteringstyp)

Innan arbetet påbörjas ska du noga läsa dessa anvisningar och bruksanvisningen som
medföljer plasma-TV:n för att försäkra att arbetet utförs på rätt sätt.
(Bevara dessa anvisningar. Du kan behöva anlita dem på nytt för underhåll eller flyttning av
hållaren.)

Svenska

Opsætningsinstruktioner

Vægophæng til plasma-tv (Type til lodret montering)

Før arbejdet påbegyndes, skal De omhyggeligt læse disse instruktioner og
betjeningsvejledningen til plasma-tv'et for at sikre at opsætningsarbejdet udføres korrekt.
(Gen disse instruktioner. De kan få brug for dem ved vedligeholdelse, eller hvis ophænget
skal flyttes.)

Dansk

ɂɧɫɬɪɭɤɰɢɹɩɨɭɫɬɚɧɨɜɤɟ

Ʉɪɨɧɲɬɟɣɧɞɥɹɧɚɫɬɟɧɧɨɝɨɤɪɟɩɥɟɧɢɹɲɢɪɨɤɨɮɨɪɦɚɬɧɨɝɨɩɥɚɡɦɟɧɧɨɝɨ

ɬɟɥɟɜɢɡɨɪɚ (Ⱦɥɹɜɟɪɬɢɤɚɥɶɧɨɝɨɦɨɧɬɚɠɚ)

ɉɟɪɟɞɩɪɨɜɟɞɟɧɢɟɦɪɚɛɨɬɜɧɢɦɚɬɟɥɶɧɨɩɪɨɱɢɬɚɣɬɟɷɬɭɂɧɫɬɪɭɤɰɢɸɢɊɭɤɨɜɨɞɫɬɜɨɞɥɹ

ɩɥɚɡɦɟɧɧɨɝɨɞɢɫɩɥɟɹ, ɱɬɨɛɵɭɛɟɞɢɬɶɫɹɜɬɨɦ, ɱɬɨɭɫɬɚɧɨɜɤɚɜɵɩɨɥɧɹɟɬɫɹɩɪɚɜɢɥɶɧɨ.

(ɋɨɯɪɚɧɢɬɟ, ɩɨɠɚɥɭɣɫɬɚ, ɷɬɭɢɧɫɬɪɭɤɰɢɸ. Ɉɧɚɦɨɠɟɬȼɚɦɩɨɧɚɞɨɛɢɬɶɫɹɞɥɹ

ɬɟɯɧɢɱɟɫɤɨɝɨɨɛɫɥɭɠɢɜɚɧɢɹɢɥɢɩɟɪɟɦɟɳɟɧɢɹ.)

Ɋɭɫɫɤɢɣ

ȱɧɫɬɪɭɤɰɿʀɡɜɫɬɚɧɨɜɥɟɧɧɹ

ɇɚɫɬɿɧɧɢɣɤɪɨɧɲɬɟɣɧɞɥɹɩɥɚɡɦɨɜɨɝɨɬɟɥɟɜɿɡɨɪɚ (Ⱦɥɹɜɟɪɬɢɤɚɥɶɧɨɝɨɦɨɧɬɚɠɭ)

ɉɟɪɟɞɩɨɱɚɬɤɨɦɪɨɛɿɬɭɜɚɠɧɨɩɪɨɱɢɬɚɣɬɟɰɿɿɧɫɬɪɭɤɰɿʀɬɚɿɧɫɬɪɭɤɰɿʀɡɟɤɫɩɥɭɚɬɚɰɿʀ

ɩɥɚɡɦɨɜɨɝɨɞɢɫɩɥɟɹ, ɚɛɢɡɚɛɟɡɩɟɱɢɬɢɩɪɚɜɢɥɶɧɢɣɦɨɧɬɚɠ.

(Ɂɛɟɪɟɠɿɬɶɰɿɿɧɫɬɪɭɤɰɿʀ, ɨɫɤɿɥɶɤɢɜɨɧɢɦɨɠɭɬɶɡɧɚɞɨɛɢɬɢɫɶȼɚɦ, ɤɨɥɢɜɢɧɢɤɧɟ

ɧɟɨɛɯɿɞɧɿɫɬɶɭɬɟɯɧɿɱɧɨɦɭɨɛɫɥɭɝɨɜɭɜɚɧɧɿɚɛɨɜɫɬɚɧɨɜɥɟɧɧɿɤɪɨɧɲɬɟɣɧɚɜɿɧɲɨɦɭɦɿɫɰɿ.)

ɍɤɪɚʀɧɫɶɤɚ

ᏠᎧົ፜ངಖ༚

םࣅ໮ଙ৩ġĩۖፊ՗ᎧᄲĪ

኷՗Ꭷ໚ࢗፇ෇ˈขႚכไጡኡޚׁངಖ༚݃୰Ꮚმ໯ධܿ໪ቂངಖ༚ˈ኷ۨনھፇຢጸฬ

ݓᄵ໚ࢗȃ

኷ဵڈ՗Ꭷ໚ࢗፇˈขׁངಖ༚Ꭱࢍࢾ૴ˈขࢾ૴ไጡኡޚဢၓ֦࣏ȃ

ĩሓၓ኷࢑࡙՗Ꭷၤ፜ডၕᅃፇ໢ˈ૰೙ঐᅍᇋׁངಖ༚ȃĪ

፩ၭ

Hѭӟng dүn lҳp ÿһt

Giá ÿӥ treo tѭӡng TV Plasma (loҥi treo thҷng ÿӭng)

Hăy ÿӑc cҭn thұn nhӳng hѭӟng dүn dѭӟi ÿây và tham khҧo sách chӍ dүn TV plasma trѭӟc

khi tiӃn hành lҳp ráp nhҵm ÿҧm bҧo cho công viӋc lҳp ráp ÿѭӧc thӵc hiӋn chính xác.

(Hăy lѭu nhӳng chӍ dүn này lҥi vғ bҥn có thӇ dùng ÿӃn chúng khi bҧo trғ hoһc dӏch chuyӇn

giá ÿӥ.)

TiӃng ViӋt

TY-WK5P1SW

Model No.

TQZJ091

2

Safety precautions

WARNING

Ensure that the installation location is strong enough to support long-term use.

• If its strength becomes insufficient over the course of long-term use, the plasma TV may drop, possibly causing
injury.

Fitting work and connection equipment expansion should never be done by any other than a qualified
installation specialist.

• Incorrect fitting may cause equipment to fall, resulting in injury.

Include a safety factor when considering the strength of the proposed fitting location.

• If strength is not sufficient the equipment may fall, resulting in injury.

Do not fit at a location that cannot bear the load.

• If the fitting location lacks sufficient strength the equipment may fall.

Do not disassemble or modify the wall-hanging bracket.

• Otherwise the unit may be dropped and become damaged, and personal injury may result.

CAUTION

Do not use any television and displays other than those given in the catalogue.

• Otherwise the unit may be dropped and become damaged, and personal injury may result.

Do not fit at any locations subject to humidity, dust, smoke, steam or heat.

• This may have an adverse effect on the plasma TV and cause fire or electric shock.

The work of fitting or removing the plasma TV must be performed by at least two people.

• The plasma TV may fall and cause injury.

Do not fit facing upwards, sideways or upside down.

• This may cause heat to build up inside the plasma TV unit, resulting in a fire.

Leave clearances all around the plasma TV of at least 10 cm (39.3 inches) above, at least 10 cm (39.3 inches)
on the left, at least 15 cm (59.1 inches) on the right and at least 10 cm (39.3 inches) below. Ensure that the
space between the back of the plasma TV and the wall behind is not blocked.

• The plasma TV unit has air blow holes on the top, and air suction holes on the bottom and rear. Covering these
may result in a fire.

Install the plasma TV by taking only the steps which are specified in these instructions: Do not install it in
any other way.

• Otherwise the unit may be dropped and become damaged, and personal injury may result.

Install the mounting screws and power cable in such a way that they will not make contact with the inside
parts of the wall.

• Electric shocks may result from contact with any metal objects inside the wall.

For installation, use the special-purpose constituent parts.

• Otherwise, the plasma TV may fall off the wall, possibly causing injury.

Remove the product that will not be used any longer.

• Otherwise the product may fall down and personal injury may result.

Requests regarding handling

1) Exercise care when selecting the location for the TV because it may discolor or deform due to light or heat if
it is placed where it is exposed to direct sunlight, or near a heater.

2) Clean the wall-hanging bracket by wiping it with a soft, dry cloth (such as cotton or flannel). If the bracket is
very dirty, remove the dirt using a neutral detergent diluted in water, and then wipe it clean with a dry cloth.
Do not use benzene, thinner, or furniture wax as this may cause the coating to peel.
(For information on cleaning the display unit, see the display unit’s instruction manual. If using a chemically­treated cloth, follow the instructions supplied with the cloth.)

3) Do not affix adhesive tape or stickers to the product. Doing so may dirty the surface of the wall-hanging
bracket. Do not allow long-term contact with rubber, vinyl products or the like. (Doing so will cause
deterioration.)

4) Take care during installation as shocks can cause ‘panel cracks’ to the plasma TV unit.

Caution:

This bracket is intended for only Panasonic plasma TV models (See back cover).
Use with other apparatus is capable of resulting in instability causing possible injury.

PROFESSIONAL INSTALLATION IS REQUIRED.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH
RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.

English

3

English

TY-WK5P1SW Wall-hanging bracket (Vertical mounting type)

Parts used to assemble the wall-hanging bracket

ヂBase upper and lower

fittings (2)

ッBracket base left fitting

(1)

ツBracket base right fitting

(1)

ヅM5x10 screws for

assembling the
fixture (4)

Parts used for installation

View of fully assembled fixtur

㇙M8×24 Allen head

countersunk screws (4)

㇜Positioning stickers (2)

㇚Dished toothed washers (4) ㇝Long bolt for securing the unit (1)

㇞Screw M6 x 50 for securing

the unit (1)

㇛ Insulation spacers (4)

㇟Allen wrench (included tool) (1)

Please note the following before proceeding with installation:

ƇThe plasma TV unit which will be attached to the wall-hanging bracket consists of the display unit,

tuner unit and speakers.

Precautions for wall-hanging bracket fitting

ƇThe wall-hanging bracket is for use in attaching a plasma TV unit to a vertical wall for viewing. Do not fit to

any surface other than a vertical wall.

Ƈ To ensure correct plasma TV performance and prevent trouble, do not fit at any of the following locations.

• Near sprinklers or fire/smoke detectors

• Where there is a risk of exposure to vibration or impact

• Near high-voltage wires or dynamic power supplies

• Near sources of magnetism, heat, water vapor or soot

• Locations exposed to air blown from heating equipment

• Where droplets of condensation from an air conditioner or other unit may form.

Ƈ Fit using techniques suited to the structure and materials of the fitting location.

ƇUse commercially available screws with a nominal diameter of 6 mm (0.2 inches) that are suited to the wall

material (wood, steel frame, concrete etc.) you are fitting the bracket to.

Ƈ For the TV power supply plug, use a power supply outlet that can be reached easily.

ƇEnsure good air flow so that the equipment ambient temperature does not exceed 40 °C (104 °F). Failure to

do this may cause heat to build up inside the plasma TV, resulting in malfunction.

ƇSpread a soft blanket or cloth over the floor so that the plasma TV and floor will not be marked or scratched

during the assembly and installation work.

ƇWhen screwing down the parts, ensure that the screws are neither insufficiently tightened nor over tightened.

ƇTake sufficient care to ensure safety around you when performing the assembly and installation work or while

moving about during the course of the work.

ƇDo not install the Plasma TV underneath ceiling lamps (spotlights, halogen lamps, etc.). Otherwise, the

cabinet may be bent or damaged by high heat.

Components

[The images shown in this manual are for illustrative

purpose only.]