Panasonic TX-P50VT30B, TX-P42VT30B Operating Instructions

QB0E2130

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this

product and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

English

UK and Ireland model

Model No.

TX-P42VT30B

TX-P50VT30B

Operating Instructions

Plasma Television

Features

Digital Switchover for Terrestrial broadcasts

Starting in late 2007 and ending in 2012, TV services in the UK will go completely digital, TV region by TV region.

If you have any questions, please call Digital UK on 08456 50 50 50 or visit www.digitaluk.co.uk

Digital Switchover will cover a period of several weeks. When it starts you will lose all Analogue TV

channels and some Digital TV channels will be missing.

You will need to retune your TV each time this happens to recover your digital channels. Analogue

channels are permanently turned off, it will not be possible to recover them.

•

To retune your TV [Auto Setup] in [DVB Tuning Menu]-DVB mode (p. 53)

Users of cable or satellite boxes should still retune the TV to continue to receive Freeview channels via

their aerial. (Your Analogue channel for viewing Cable or Satellite services will change to a new position.)

•

Due to the digital reception technologies involved, quality of the digital signals may be relatively low in

some cases, despite good reception of analogue channels.

3D technology -

Viewing 3D images on the Full HD panel

You can enjoy viewing 3D images on this TV by

wearing the 3D Eyewear.

RealD 3D

This TV and 3D Eyewear use the 3D technology of

RealD. RealD is one of the inventors in 3D technology.

freesat HD tuner built-in

This TV has a built-in freesat HD tuner. freesat

is a free digital TV service which broadcasts via

satellite so you can receive TV, radio, interactive

TV, and HD TV with crystal clear reception.

DVB-T tuner built-in

Receives DVB (Digital Video Broadcasting)

digital terrestrial broadcasts.

DVB-T2 tuner built-in

DVB-T2 is an advanced digital terrestrial system

for more efficient transmission.

Available DVB-T2 broadcasts will be tuned

automatically when you perform DVB Auto Setup.

GUIDE Plus+ (p. 24)

This TV supports the TV Guide services sent

from the GUIDE Plus+ system.

Sharp pictures and clear sound with HDMI

connection (p. 117)

Enjoy high definition digital picture and high

quality sound by using an HDMI cable.

Using USB devices

Enjoy recording and playback the digital TV

programmes to the USB HDD. (p. 74, 87)

Enjoy the photo, video and music in the USB

Flash Memory on Media Player. (p. 79)

Wireless LAN Adaptor for the network

connection. (p. 6, 12)

USB keyboard, gamepad, etc. are available. (p. 118)

Timer Programming (p. 26, 62)

Timer Programming enables you to use

functions such as programme reminder and

programme recording to the external recorder or

formatted USB HDD / SD Card.

SDXC Card

This TV supports SDXC Card. SDXC is the latest

standard of SD Card and a higher storage capacity card.

DLNA

DLNA is a standard that makes digital electronics

easier and more convenient to use on a home

network. (p. 98)

VIERA Connect - Enjoy great web

entertainment (p. 18, 101)

VIERA Connect allows you to access some

specific websites supported by Panasonic, and

enjoy internet contents such as photos, videos,

games, etc. from VIERA Connect home screen.

Link up and control the connected equipment

with “Q-Link” and “VIERA Link” (p. 102)

Q-Link and VIERA Link provide easy recording

and playback, creation of a home theatre without

complicated settings, etc.

VIERA TOOLS - Display special feature icons

for easy accessibility (p. 40)

Special features (such as VIERA Link and Media

Player) can be accessed easily by using the

VIERA TOOLS button.

Dolby Digital Plus / Dolby Pulse decoders

It is possible to decode Dolby Digital Plus / Dolby

Pulse multi-channel audio tracks and output as

Dolby Digital Bitstream (multi-channel sound

signal) from DIGITAL AUDIO OUT / HDMI2 (ARC

function) terminals.

CONEQ (p. 44)

CONEQ is a technology to transduce the sound

from speakers. You can enjoy sophisticated

sound true to the original one.

Owner ID (p. 68)

Owner ID is an anti-theft function. Entering the

PIN number and owner’s personal information

will help the Police to determine the owner in the

case of theft.

Supports Audio Description signal (p. 20, 45)

Audio Description (when broadcast) adds an

additional soundtrack to describe events on

screen (narration) and aids understanding and

enjoyment, particularly for visually-impaired

viewers.

Do not display a still picture for a long time

This causes the image to remain on the plasma

screen (“image retention”). This is not considered a

malfunction and is not covered by the warranty.

Typical still images

•

Channel number and other logos

•

Image displayed in 4:3 mode

•

Video game

•

Computer image

To prevent image retention, contrast is lowered

automatically after a few minutes if no signals are

sent or no operations are performed. (p. 121)

Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or

damage arising from operation and/or performance

from usage of such other maker’s peripheral devices.

The recording and playback of content on this or any

other device may require permission from the owner

of the copyright or other such rights in that content.

Panasonic has no authority to and does not grant

you that permission and explicitly disclaims any right,

ability or intention to obtain such permission on your

behalf. It is your responsibility to ensure that your use

of this or any other device complies with applicable

that legislation for more information on the relevant

laws and regulations involved or contact the owner of

the rights in the content you wish to record or playback.

This product is licensed under the AVC patent portfolio

license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the AVC

Standard (“AVC Video”) and/or (ii) decode AVC Video

that was encoded by a consumer engaged in a personal

and non-commercial activity and/or was obtained from a

video provider licensed to provide AVC Video. No license

is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

ROVI CORPORATION AND/OR ITS RELATED AFFILIATES

ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF

THE PROGRAM SCHEDULE INFORMATION PROVIDED BY

THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL ROVI

CORPORATION AND/OR ITS RELATED AFFILIATES BE

LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF

PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR

CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE

PROVISION OR USE OF ANY INFORMATION, EQUIPMENT,

OR SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.

http://www.europe.guideplus.com/

Notice for DVB / Data broadcasting / IPTV functions

This TV is designed to meet the standards (as of

August, 2010) of digital services.

•

The compatibility with future services is not guaranteed.

•

Check the latest information on the available

services at the following website.

http://panasonic.jp/support/global/cs/tv/

Contents

Be Sure to Read

Safety Precautions ·····································4

Quick Start Guide

Accessories / Options ·································6

Identifying Controls ·····································9

Basic Connection······································11

Auto Setup ················································13

Enjoy your TV!

Basic Features

Using “VIERA Connect” ····························18

Watching TV ·············································19

Using TV Guide ········································23

Viewing Teletext ········································28

Watching External Inputs ··························31

Viewing 3D images ···································33

How to Use VIERA TOOLS ······················40

How to Use Menu Functions ····················41

Advanced Features

Retuning from Setup Menu·······················52

Tuning and Editing Channels ···················54

Timer Programming ··································62

Child Lock ·················································64

Input Labels ··············································66

Shipping Condition ···································67

Owner ID ··················································68

Using Common Interface ··························69

Updating the TV Software ························70

Multi Window ············································71

Advanced Picture Settings ·······················72

USB HDD / SD Card Recording ···············74

Using Media Player ··································79

Using Network Services

(DLNA / VIERA Connect / freesat) ············91

Link Functions (Q-Link / VIERA Link) ·····102

External Equipment ································ 110

FAQs, etc.

Technical Information······························ 113

FAQs·······················································121

On screen messages······························124

Maintenance ···········································127

Glossary ·················································127

Index ·······················································128

Licence ···················································129

Specifications ·········································130

Safety Precautions

Warning

■ Mains plug and lead

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:

•

This TV is designed to operate on AC 220-240 V, 50 / 60 Hz.

•

Insert the mains plug fully into the socket outlet.

•

Ensure that the mains plug is easily accessible.

•

Remove the mains plug when cleaning the TV.

•

Do not touch the mains plug with a wet hand.

If you detect anything unusual,

immediately switch off the mains supply

switch and remove the mains plug.

•

Do not damage the mains lead.

AC 220-240 V

50 / 60 Hz

• Do not place a heavy

object on the lead.

• Do not place the

lead near a high

temperature object.

• Do not pull on the

lead. Hold onto the

mains plug body when

disconnecting the plug.

• Do not move the TV with the lead plugged into a socket outlet.

• Do not twist the lead, bend it excessively or stretch it.

• Do not use a damaged mains plug or socket outlet.

• Ensure the TV does not crush the mains lead.

•

Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.

• An apparatus with CLASS I construction shall be connected to a mains socket outlet with a

protective earthing connection.

IMPORTANT: THE MOULDED MAINS PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 10

amp fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the

replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark on the body of the fuse.

If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is

replaced.

If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.

A replacement fuse cover may be purchased from your local dealer.

Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this TV.

The supplied mains lead and moulded plug are designed to be used with this TV to avoid

interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified

electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an

authorized dealer.

WARNING: – THIS TV MUST BE EARTHED.

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

Safety Precautions

Warning

■ Take care

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:

•

Do not remove covers and never modify the TV yourself as live parts are

accessible when they are removed. There are no user serviceable parts inside.

•

Do not expose the TV to rain or excessive moisture. This TV must

not be exposed to dripping or splashing water and objects filled with

liquid, such as vases, must not be placed on top of or above the TV.

•

Do not expose the TV to direct sunlight and other sources of heat. To

prevent fire never place any type of candle or naked flame on top or

near the TV.

•

Do not place the TV on sloped or unstable surfaces, and ensure that

the TV does not hang over the edge of the base.

•

Do not insert foreign objects into the TV through the air vents.

•

Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic

dealer to perform the setup or installation of approved wall-hanging brackets.

•

Do not apply strong force or impact to the display panel.

To prevent the spread of fire, keep candles or other

open flames away from this product at all times

■ Small object

This product contains possibly dangerous parts that can be breathed in or swallowed by young children accidentally.

•

Keep the dangerous parts out of reach of young children.

•

Do not allow children to handle SD Card. As with any small object, the

SD Card could be swallowed by young children. Please remove SD Card

immediately after use and store out of reach of young children.

Caution

■ Ventilation

Allow sufficient space around the TV in order to help prevent excessive

heat, which could lead to early failure of some electronic components.

Minimum distance

10 7

(cm)

•

Ventilation should not be impeded by covering

the ventilation openings with items such as

newspapers, tablecloths and curtains.

•

Whether you are using the pedestal or not, always ensure the vents

in the bottom of the TV are not blocked and there is sufficient space

to enable adequate ventilation.

■ Moving the TV

Before moving the TV, disconnect all cables.

•

The TV is heavy. Move the TV with at least two people. Support as

shown to avoid injury by the TV tipping or falling.

•

Transport only in upright position. Transporting the TV with its display panel

facing upward or downward may cause damage to the internal circuitry.

■ When not in use for a long time

This TV will still consume some power even in the Off mode, as long as the mains plug is still

connected to a live socket outlet.

•

Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.

■ Excessive volume

Do not expose your ears to excessive volume from the headphones.

Irreversible damage can be caused.

Accessories / Options

Quick Start Guide

Accessories / Options

Standard accessories

Remote Control

•

N2QAYB000593

Batteries for the

Remote Control (2)

•

(p. 7)

Pedestal

TX-P42VT30B :

•

TBL5ZX0063

•

TXFBL5Z0007

•

TXFBL5Z0017

(p. 7)

TX-P50VT30B :

•

TBL5ZX0067

•

TXFBL5Z0009

•

TXFBL5Z0019

Clamper

•

TMME289

(p. 11)

Wireless LAN Adaptor

and exclusive stand

•

N5HBZ0000055

•

K2KYYYY00132

(p. 12, 92)

3D Eyewear set (2)

•

N5ZZ00000223

(p. 34)

Ferrite core (2)

(Large size)

•

J0KG00000014

(p. 12, 111)

Ferrite core

(Small size)

•

J0KG00000011

(p. 112)

Use the Ferrite cores to comply with the EMC

standard.

Operating Instructions Product Registration Leaflet

Terminal adaptors

Satellite adaptor

•

K1TYYYY00158

(p. 11, 110)

RF adaptor

•

K1TYYYY00159

(p. 11, 12, 110)

SCART adaptor

•

K1HY20YY0008

(p. 11, 12, 110)

COMPONENT adaptor

•

K2KYYYY00137

(p. 110)

Composite adaptor

•

K2KYYYY00136

(p. 110, 111)

Audio adaptor

•

K2KYYYY00138

(p. 111)

Optical digital audio adaptor

•

K7CXGYC00001

(p. 111)

•

Accessories may not be placed all together. Take care not to throw them away unintentionally.

•

This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or

swallowed by young children accidentally. Keep these parts out of reach of young children.

Optional accessories

Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For

additional details, please refer to the manual of the optional accessories.

3D Eyewear set

(Battery type) (Rechargeable type)

•

TY-EW3D10E

•

TY-EW3D2LE

•

TY-EW3D2ME

•

TY-EW3D2SE

•

If you need 3D Eyewears additionally, please purchase this

optional accessory.

•

For more information :

http://panasonic.net/avc/viera/3d/eu.html

Communication Camera

•

TY-CC10W

Caution

•

This camera can be used on VIERA Connect (p. 18, 101).

•

Please also read the manual of the camera.

•

Depending on the area, this optional accessory may not be available.

For details, consult your local Panasonic dealer.

Accessories / Options

Wall-hanging bracket

•

TY-WK4P1RW

•

Tilting angle for this TV : 0 (vertical) to 20 degrees

Rear of the TV

Holes for wall-hanging bracket installation

400 mm

Depth of screw : minimum 10 mm,

maximum 16 mm

Diameter : M8

300 mm

(View from the side)

Screw for fixing the TV onto the wall-hanging

bracket (not supplied with the TV)

Warning

•

Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk

of personal injury and product damage. In order to maintain the unit’s performance and safety, be

absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any

damage caused by installing without a qualified installer will void your warranty.

•

Carefully read the instructions accompanying optional accessories, and be absolutely sure to take

steps to prevent the TV from falling off.

•

Handle the TV carefully during installation since subjecting it to impact or other forces may cause

product damage which will void your warranty.

•

Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or

pipes in the wall before hanging bracket.

•

To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use for an

extended period of time.

Installing / removing remote’s batteries

Pull open

Hook

Caution

•

Incorrect installation may cause battery leakage and

corrosion, resulting in damage to the remote control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such as alkaline and

manganese batteries).

•

Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or break up batteries.

Batteries must not be exposed to excessive heat such as

sunshine, fire, etc.

•

Do not disassemble or modify the remote control.

Note the correct

polarity (+ or -)

Attaching / removing the pedestal

To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and

cautions below :

Warning

•

Do not disassemble or modify the pedestal.

Caution

•

Do not use any pedestal other than the one provided with this TV.

•

Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your

nearest Panasonic dealer immediately.

•

During setup, make sure that all screws are securely tightened.

•

Ensure that the TV does not suffer any impact during installation of the pedestal.

•

Ensure that children do not climb onto the pedestal.

•

Install or remove the TV from the pedestal with at least two people.

Quick Start Guide

Accessories / Options

Quick Start Guide

Assembly screw (4)

(silver)

•

XYN5+F20FN

M5 × 20

Assembly screw

(black)

•

XSB4+8FNK

M4 × 8

Base

•

TBL5ZX0063

(TX-P42VT30B)

•

TBL5ZX0067

(TX-P50VT30B)

Cover

•

TBL5ZB3045-1

(TX-P42VT30B)

•

TBL5ZB3054-1

(TX-P50VT30B)

Assembly screw (4)

(black)

•

THEL087N

(TX-P42VT30B)

•

THEL088N

(TX-P50VT30B)

M5 × 25

Pole

•

TBL5ZA3055

(TX-P42VT30B)

•

TBL5ZA3065

(TX-P50VT30B)

Assembling the pedestal

Use the assembly screws

to fasten the

pole

to the base

securely.

•

Make sure that the screws are securely tightened.

•

Forcing the assembly screws the wrong

way will strip the threads.

Securing the TV

Use the assembly screws

to fasten securely.

•

Tighten the four assembly screws loosely at

first, then tighten them firmly to fix securely.

•

Carry out the work on a horizontal and level surface.

Hole for

pedestal

installation

(View from the bottom)

Arrow mark

Front

Attach the cover

with assembly screw

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws

from the TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screw

from the cover.

4 Pull out the cover.

5 Remove the assembly screws

from the pole.

Adjusting the panel to your desired angle

•

Do not place any objects within the full rotation range.

(View from the top)

: 15°

(TX-P42VT30B)

: 10°

(TX-P50VT30B)

Identifying Controls

Remote Control

1 Standby On / Off switch

•

Switches TV On or Off

standby

2 3D button (p. 38)

•

Switches to the viewing

mode between 2D and 3D

3 [Main Menu]

(p. 41)

•

Press to access Picture,

Sound, Timer and Setup

Menus

4 Aspect

(p. 22)

•

Changes aspect ratio

5 Light

•

Lights the buttons

(numeric, sound mute, last

view, volume, channel) for

about 5 seconds

6 [VIERA Link Menu]

(p. 106)

7 Information (p. 20)

•

Displays channel and

programme information

8OK

•

Confirms selections and

choices

•

Press after selecting

channel positions to

quickly change channel

•

Displays the Channel List

9 [Option Menu]

(p. 21)

•

Easy optional setting for

viewing, sound, etc.

10 Teletext (p. 28)

•

Switches to teletext mode

11 Subtitles (p. 22)

•

Displays subtitles

12 Numeric buttons

•

Changes channel and

teletext pages

•

Sets characters

•

When in Standby mode,

switches TV On (Press for

about 1 second)

13 Sound Mute

•

Switches sound mute On

or Off

14 Volume Up / Down

15 Input mode selection

•

TV - switches freesat /

DVB / Analogue /

Other Sat. / Satellite mode

(p. 19)

•

AV - switches to AV input

mode from Input Selection

list

(p. 31)

Quick Start Guide

16 Direct TV Recording

(p. 104, 106)

•

Records programme

immediately in DVD

Recorder / VCR with

Q-Link or VIERA Link

connection

17 TV Guide

(p. 23)

18 [VIERA Connect]

(p. 18, 101)

•

Displays VIERA Connect

home screen

19 VIERA TOOLS

(p. 40)

•

Displays some special

feature icons and accesses

easily

20 Exit

•

Returns to the normal

viewing screen

21 Cursor buttons

•

Makes selections and

adjustments

22 Return

•

Returns to the previous

menu / page

23 Coloured buttons

(red-green-yellow-blue)

•

Used for the selection,

navigation and operation of

various functions

24 Hold

•

Freeze / unfreeze picture

(p. 21)

•

Holds the current teletext

page (teletext mode)

(p. 29)

25 Index (p. 30)

•

Returns to the teletext

index page (teletext mode)

26 Last view

(p. 20)

•

Switches to previously

viewed channel or input

mode

27 Channel Up / Down

28 Connected equipment

operations

(p. 32, 78, 80, 98, 108)

Identifying Controls

9 10 11 8

Using the On Screen Displays - Operation guide

Many features available on this TV can be accessed via the On Screen Display menu.

Operation guide

Operation guide will help you to operate

by using the remote control.

Example : [Owner ID]

* * * *

Please enter new PIN

Owner ID

EXIT

PIN entry

Operation guide

How to use remote control

Open the main menu

Move the cursor / select the menu item /

select from a range of options

Move the cursor / adjust levels /

select from a range of options

Access the menu / store settings after

adjustments have been made or options

have been set

Return to the

previous menu

Exit the menu system

and return to the

normal viewing screen

Auto power standby function

The TV will automatically go to Standby mode in the following conditions:

• no signal is received and no operation is performed for 30 minutes in Analogue TV mode

• [Off Timer] is active in the Timer Menu (p. 21)

• no operation is performed for the period selected in [Auto Standby] (p. 45)

•

This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch

Recording.

Quick Start Guide

1 CI slot (p. 69)

2 SD Card slot

(p. 74, 79)

3 USB 3 port

(p. 74, 112)

4 HDMI1 - 4 terminal

(p. 112)

unction select

•

[Volume] / [Contrast] / [Brightness] / [Colour] /

[Sharpness] / [Tint] (NTSC signal) / [Bass]

∗

[Treble]

∗

/ [Balance] / [Auto Setup] (p. 52, 53)

∗

[Music] or [Speech] mode in the Sound Menu

6 Channel Up / Down, Value change (when

using the F button), Switching the TV On

(press either button for about 1 second when

in Standby mode)

7 Changes the input mode

8 Mains power On / Off switch

•

Use to switch the mains power.

If you turned the TV Off during Standby

mode by the remote control last time, the TV

will be in Standby mode when you turn the

TV On with Mains power On / Off switch.

9 Remote control signal receiver

•

Do not place any objects between the TV remote

control signal receiver and remote control.

10 C.A.T.S. (Contrast Automatic Tracking

System) sensor

•

Senses brightness to adjust picture quality when

[C.A.T.S.] in the Picture Menu is set to [On]

(p. 42)

11 Power and Timer LED

•

Red : Standby

Green : On

Orange : Timer Programming On

Orange (flash) :

Recording of Timer Programming,

Direct TV Recording or One Touch

Recording in progress

Red with orange flash :

Standby with Timer Programming On, Direct

TV Recording or One Touch Recording

•

The LED blinks when the TV receives a

command from the remote control.

12 Infrared transmitter for 3D Eyewear

•

Do not place any objects between the

transmitter and 3D Eyewear.

Basic Connection

Quick Start Guide

Basic Connection

External equipment and cables shown are not supplied with this TV.

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

There are some restrictions on placement for viewing 3D images. For details (p. 33, 37)

Example 1 Connecting dish or aerial

TV only

To ensure your satellite dish is correctly installed, please consult your local dealer.

•

Also please consult the received satellite broadcasting companies for details.

•

The freesat channel uses Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East satellites. To ensure your

satellite dish is correctly installed please consult your freesat registered dealer.

Aerial input terminal

Rear of the TV

Terrestrial aerial

AC 220-240 V

50 / 60 Hz

Mains lead

RF cable

•

For digital satellite

broadcasts

Satellite dish

Satellite cable

Satellite adaptor

(supplied)

RF adaptor

(supplied)

•

For digital terrestrial and analogue

broadcasts

■ Clamper (Standard accessory / Attached with the mains lead)

Attach the clamper Bundle the cables

To remove from the TV:

To loosen:

hole

Insert the

clamper in a

hole

hooks

Set the

tip in the

hooks

Keep pushing

both side

snaps

knob

Keep

pushing the

knob

•

Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image).

•

Fix cables with clampers as necessary.

•

When using the optional accessory, follow the option’s assembly manual to fix cables.

Example 2 Connecting DVD Recorder / VCR and Player

TV, DVD Recorder / VCR and Player

RF IN

RF OUT

Rear of the TV

Terrestrial

aerial

AC 220-

240 V

50 / 60 Hz

Mains lead

RF cable

RF adaptor

(supplied)

RF cable

DVD Recorder or

VCR

Player /

3D-compatible player

Fully wired SCART cable

Fully wired HDMI

compliant cable

SCART adaptor

(supplied)

Aerial input terminal

HDMI

Basic Connection

Quick Start Guide

Example 3 Connecting DVD Recorder / VCR and Cable TV Box

TV, DVD Recorder / VCR and Cable

RF IN

RF OUT

RF OUT RF IN

Rear of the TV

Terrestrial

aerial

Mains lead

AC 220-

240 V

50 / 60 Hz

Fully wired HDMI

compliant cable

Fully wired

SCART cable

Fully wired

SCART cable

RF adaptor

(supplied)

SCART adaptor

(supplied)

Cable TV Box

DVD Recorder or VCR

cable

RF cable

AV 2

Recorder/AV

HDMI

AV 1

RF cable

Cable

Aerial input

terminal

■ Connecting to the network environment (Network connections)

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a

broadband network environment.

•

If you do not have any broadband network services, please consult your retailer for assistance.

•

Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).

•

Setup of the network connection will start after the tuning (when first using the TV) (p. 14, 15)

Internet

environment

Internet

environment

Wired connection

Wireless connection

Access point

LAN cable

Wireless LAN Adaptor and exclusive stand

“Standard accessories” (p. 6)

•

Insert the Wireless LAN Adaptor to the stand

straightly and completely.

•

Connect to the USB 1 or 2 port.

Rear of the TV

Less

than

10 cm

Less

than

10 cm

Ferrite core - Large size (supplied)

Installing the Ferrite core

Pull back the tabs

(in two places)

Wind the cable

twice

Press the cable

through and close

•

For more information of the network connections (p. 92)

Note

•

To watch 3D contents (p. 33)

•

Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link (p. 104).

•

For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 /

HDMI4) by using HDMI cable (p. 110).

•

Q-Link and VIERA Link connection (p. 102, 103)

•

Please also read the manual of the equipment being connected.

•

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

Auto Setup

Search and store TV channels automatically.

•

These steps are not necessary if the setup has been completed by your local dealer.

•

Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before

starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.

Plug the TV into mains socket and switch On

•

Takes a few seconds to be displayed.

•

If the red LED shows on the TV, press the Standby On / Off switch

on the remote control for at least 1 second to turn the TV On.

Select your country

Country Selection

United Kingdom Ireland

set

select

Example : Example :

freesat Auto Setup

Signal Quality

Searching

Signal Strength

TV Channels Found

Radio Channels Found

Data Channels Found

Channels found, creating channel list.

CH 21 68

CBBC Channel

BBC Radio Wales

62 10Cartoon Nwk

29 -

33 -BBC1

Searching

CH Channel Name Type

Free TV

Analogue

Quality

Free TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2

Auto Setup - DVB and Analogue

DVB Scan

Analogue Scan

This will take about 6 minutes.

0% 100%

Satellite Auto Setup

Satellite

Checking Satellite

Progress

This will take up to 5 minutes.

0% 100%

ETV

BBC TES 2

BBC TES 3

910BBC FOUR

10 10CBBC Channel

11 10CBeebies

Searching

Satellite Auto Setup

Satellite

Astra1

Progress

This will take up to 30 minutes.

No. Channel Name Type

Free TV

Quality

Free TV: 11 Pay TV: 0 Radio: 0

CH 5 69

CBBC Channel

BBC Radio Wales

62 10Cartoon Nwk

CH29 -

CH33 -BBC1

CH 1 99 41H: 21

Searching

CH Channel Name Type

Free TV

Analogue

Quality

Free TV: 8 Pay TV: 0 Radio: 0 Analogue: 2

Auto Setup - DVB and Analogue

DVB Scan

Analogue Scan

This will take about 6 minutes.

Search Mode

Free Channels All Channels

start

select

Auto Setup will start to search for

TV channels and store them.

•

Actual number of channels may

differ due to channel duplication.

0% 100%

Sending Preset Data

Please wait!

Remote control unavailable

If Q-Link or similar technology (p. 104)

compatible recorder with analogue tuner

is connected, analogue channel setting is

automatically downloaded to the recorder.

(Digital channel setting is not downloaded.)

•

If downloading has failed, you can download later through the Setup Menu.

“Q-Link Download” (p. 46)

Enter your postcode

.!:#

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Enter Postcode for local channels including space

Postcode

•

Your postcode is required to receive

local services and sort the channel order.

Please ensure to include a space

when entering your postcode.

•

If you skip this step, the default

postcode (central London) will be set.

■ How to enter the postcode

Set characters

Exit to go to next step

select

set

(green)

•

You can set characters by

using numeric buttons.

“Characters table for

numeric buttons” (p. 117)

Quick Start Guide

Auto Setup

Setup the network connection

Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 18, 101).

•

To setup the wireless connection, use the Wireless LAN Adaptor (supplied). (p. 17)

Please note that this TV does not support wireless public access points.

•

Ensure the network connections (p. 12) and network environment are completed before starting setup.

Select the network type

Network Setup

Select Wired or Wireless

Wired Wireless Set later

[Wired] “Wired connection” (p. 12)

[Wireless] “Wireless connection” (p. 12)

access

select

•

To setup later on or skip this step

Select [Set later] or

■ [Wired]

1. Select [Auto]

Check network cable connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection for VIERA Connect.

Connection Test

: succeeded

The test is

successful and the

TV is connected to

the network.

: failed

Check the settings

and connections. And

then select [Retry].

Acquire IP Address

Auto Manual

access

select

Automatically setup is done and the test of the

network connection starts.

•

To set manually, select [Manual] and set

each item. For details (p. 94)

2. Go to the next step

(Press twice)

■ [Wireless]

Select the connection type

Connection Type

Please select network connection type.

Search for access point

WPS(Push button)

access

select

[Search for access point]

Access points found automatically are listed.

1. Select your desired access point

Access Point A

SSID

Access Point B

Access Point C

11n(2.4GHz)

11n(5GHz)

Available Access Points

No. Wireless type Encrypt Reception

access

select

: Encrypted access point

•

To search access points again

(yellow)

•

For the information of the

highlighted access point

•

To set manually (p. 97)

(red)

2. Access the encryption key input mode

Encryption Key Setting

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

Please input the encryption key.

Encryption key

•

If the selected access point is not encrypted, the

confirmation screen will be displayed. It is recommended

to select the encrypted access point.

3. Enter the encryption key of the access point

.!:#

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #

a b c d e f g h i j k l m n o p q r s t

u v w x y z ( ) + - . * _

Access Point Settings

Encryption key

Set characters Store

select

set

•

You can set characters by

using numeric buttons.

“Characters table

for numeric buttons”

(p. 117)

Quick Start Guide

Auto Setup

4. Select [Yes]

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select 'Yes' to confirm.

Select 'No' to change.

Yes

set

select

•

To re-enter the encryption key, select [No].

•

If the connection has failed, check the encryption key,

settings and positions of your access point. And then,

follow the on screen instructions.

5. After the access point setting is finished, perform the connection test

Check access point connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection for VIERA Connect.

Connection Test

: succeeded

The test is successful and the TV is connected

to the network.

: failed

Check the settings and connections. And then

select [Retry].

•

To set manually, select [Manual] and set

each item. For details (p. 94)

6. Go to the next step

(Press twice)

[WPS(Push button)]

1. Press the WPS button on the access point until the light flashes

2. Connect the Wireless LAN Adaptor and the access point

1) Please press the ‘WPS’ button on the access

point until its light flashes.

2) When the light is flashing select ‘Connect’ on

TV.

If you are unsure, please check the instruction

manual of the access point.

WPS(Push button)

Connect

•

Ensure that your access point supports WPS for this

setup.

•

WPS : Wi-Fi Protected Setup™

•

If the connection has failed, check the settings and

positions of your access point. And then, follow the on

screen instructions.

3. After the access point setting is finished, perform the connection test

Check access point connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection for VIERA Connect.

Connection Test

: succeeded

The test is successful and the TV is

connected to the network.

: failed

4. Go to the next step

Check the settings and connections. And then

select [Retry].

•

To set manually, select [Manual] and set

each item. For details (p. 94)

(Press twice)

Input Owner ID

* * * *

Please enter new PIN

Owner ID

Please enter your own choice of PIN number, name, etc. to

help the police to crack crime.

•

Make a note of the PIN number in case you forget it. The PIN number cannot be reset.

•

You can input or change the Owner ID later. [Owner ID] (p. 68)

•

To skip this step

•

This step will be skipped in the Auto Setup after [Shipping Condition] (p. 67) is performed.

Quick Start Guide

Auto Setup

■ How to input Owner ID

1 Enter the PIN number (4 digits)

* * * *

Please enter new PIN

Owner ID

•

Enter the PIN number twice at first setting.

2 Select the item (NAME / HOUSE NO / POSTCODE)

* * * *

NAME

HOUSE NO

POSTCODE

Owner ID-Data Entry

access

select

3 Enter your name, house number and postcode

Set characters

.!:#

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #

a b c d e f g h i j k l m n o p q r s t

u v w x y z ( ) + - . * _

User input

NAME

select

set

Return to select other items

•

You can set characters by

using numeric buttons.

“Characters table for

numeric buttons” (p. 117)

•

Select the next item and

repeat the operations.

4 Exit to go to next step

Select [Home]

Select [Home] viewing environment (highlight [Home] in yellow) to use in your home environment.

Please select your viewing environment.

Home Shop

set

select

■ [Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main features of this TV.

Select [Home] viewing environment to use in your home environment.

•

You can return to viewing environment selection screen at the stage of Shop confirmation

screen and Automatic Demo Off / On selection screen.

1 Return to viewing environment

selection screen

2 Select [Home]

Please select your viewing environment.

Home Shop

set

select

Shop

You have selected shop mode

Automatic Demo

Off

To change viewing environment later on, you will need to initialise all settings by accessing

Shipping Condition. [Shipping Condition] (p. 67)

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the Satellite cable, RF cable, and then, follow the on

screen instructions.

•

To check channel list at-a-glance “Using TV Guide” (p. 23)

•

To edit or hide (skip) channels “Tuning and Editing Channels” (p. 54 - 61)

•

To retune all channels [Auto Setup] (p. 52, 53, 60)

•

If you wish to tune in other satellite channels [Auto Setup] in [Other Sat. / Satellite Tuning Menu] (p. 60)

•

To initialise all settings [Shipping Condition] (p. 67)

Quick Start Guide

Auto Setup

Wireless LAN Adaptor

Caution

Be aware of the following limits before using the supplied Wireless LAN Adaptor.

•

To use the Wireless LAN Adaptor, an access point needs to be obtained.

•

Do not use the Wireless LAN Adaptor to connect to any wireless network (SSID

∗

) for which you do not

have usage rights. Such networks may be listed as a result of searches. However, using them may be

regarded as illegal access.

∗

SSID is a name for identifying a particular wireless network for transmission.

•

Do not subject the Wireless LAN Adaptor to high temperatures, direct sunlight or moisture.

•

Do not bend, or subject the Wireless LAN Adaptor to strong impacts.

•

Do not disassemble or alter the Wireless LAN Adaptor in any way.

•

Do not attempt to install the Wireless LAN Adaptor in any incompatible device.

•

Do not remove the Wireless LAN Adaptor from the TV’s USB port during operations.

•

Data transmitted and received over radio waves may be intercepted and monitored.

•

To avoid malfunctions caused by radio wave interface, keep the TV away from the devices such as

other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when

using the Wireless LAN Adaptor.

•

When noises occur due to the static electricity, etc., the TV might stop operating for the protection of

the devices. In this case, turn the TV Off with Mains power On / Off switch, then turn it On again.

•

Depending on the area, this Wireless LAN Adaptor may not be available.

•

Additional information for Wireless LAN Adaptor and access point may be on the following web site.

http://panasonic.jp/support/global/cs/tv/

If you connect the Wireless LAN Adaptor later on, the confirmation

screen will be displayed for the setup.

Wireless LAN adaptor connected, do you want to

set it up?

No - Exit

Current network type : Wireless

Wireless LAN adaptor connection

Yes

•

To setup the wireless connection (p. 95 - 97)

Wireless LAN Adaptor

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in compliance with

the essential requirements and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact in the EU: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

This product is intended to be used in Ireland and United Kingdom.

This product is intended for general consumer. (Category 3)

The WLAN feature of this product shall exclusively be used inside buildings.

This product on purpose to connect to access point of 2.4 GHz or 5 GHz WLAN.

Quick Start Guide

Using “VIERA Connect”

VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA

CAST features greatly.

VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy

internet contents such as photos, videos, games, etc. from VIERA Connect home screen.

•

This TV has no full browser function and all features of websites may not be available.

Turn power on

•

Press for about 1 second

•

Mains power On / Off switch should be

On. (p. 10)

Every time you turn on the TV, VIERA Connect

introduction banner appears. The banner is

subject to change.

Enjoy selected internet content with VIERA Connect.

Simply press the OK / INTERNET button

Access VIERA Connect

While the banner is displayed

•

The button marking

varies depending on the

remote control supplied

with your TV.

Example :

Welcome to VIERA Connect™

VIERA Connect™ home screen is subject to change without notice.

The services through VIERA Connect™ are operated by their respective service providers, and service may

be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no

warranty for the content or the continuity of the services.

All features of websites or content of the service may not be available.

Some content may be inappropriate for some viewers.

Some content may only be available for specific countries and may be presented in specific languages.

ENTER

Don’t show this message again

•

Depending on the usage conditions, it may

take a while to read all the data.

•

Messages might be displayed before

VIERA Connect home screen.

Please read these instructions carefully and

follow the on screen instructions.

Example : VIERA Connect home screen

BACK

•

To go to the next level

[MORE]

•

To back to the previous level

[BACK]

■

To exit from

VIERA Connect

•

To set the VIERA

Connect instruction

banner display off

[VIERA Connect

Banner] (p. 47)

■ How to operate VIERA Connect (current as of January, 2011)

•

To move the cursor / select the item

•

When the key words are displayed on colour bar

(red) (green) (yellow) (blue)

•

To access

•

When options with

numbers are displayed

•

To return to the previous screen

•

To return to VIERA Connect

home screen

•

Video communication (ex. Skype™) requires an exclusive Communication Camera TY-CC10W.

“Optional accessories” (p. 6)

For details, read the manual of the Communication Camera.

•

You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.

You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features.

For more information

“USB connection” (p. 118)

Note

•

If you cannot access VIERA Connect, check the network connections (p. 12) and settings (p. 14, 15).

•

For more information of VIERA Connect (p. 101)

Watching TV

Volume

Turn power on

•

Press for about 1 second

•

Mains power On / Off switch should be On. (p. 10)

■ VIERA Connect introduction banner appears

You can access to VIERA Connect and enjoy the various contents. (p. 18)

•

To remove this banner, leave for about 5 seconds or press

any buttons (except the buttons to access VIERA Connect).

•

To set this banner display off [VIERA Connect Banner] (p. 47)

Select the mode (freesat, DVB, Analogue , Other Sat. or Satellite)

•

The selectable modes vary depending on the selected country

and stored channels (p. 13).

TV Selection

freesat

DVB

Analogue

Other Sat.

Satellite

Displayed if [Other Satellite Auto Setup]

(p. 60) is completed.

access

select

BBC ONE WALES

Coronation Street

20:00 - 20:55

20:35

Now Info

All DVB Channels

Select favourites

•

Also possible to select the mode pressing

the TV button repeatedly on the remote

control or side panel of the TV (p.10).

Information banner (p. 20)

Select a channel

down

freesat channel position numbers run in the

ranges 100 - 999 and 0100 - 0999.

•

To select a three or four-digit channel position

number, e.g. 0246

DVB and Other Sat. / Satellite channel position

numbers run from 1 onwards.

Analogue channel position numbers run in the

ranges 0 - 99.

•

To select a two or three-digit channel position

number, e.g. 399

■ Select a channel using Information banner (p. 20)

It is possible to confirm the channel name and programme information by using the Information banner

before changing channels.

Display Information banner if it is not displayed

While the banner is displayed, select the channel

watch

select channel

■ Select a channel using TV Guide (p. 23)

It is possible to confirm the channel and programme information by using the TV Guide (EPG) before changing channels.

Display TV Guide

2 Select a current

programme or channel

3 Select [View] (DVB mode)

Eastender

19:30- 20:00

View

Timer Programming

watch

select

access

Note

•

To watch pay-TV “Using Common Interface” (p. 69)

Watching TV

Other useful functions

Display Information banner

•

Also appears when changing a channel

ZDF

Coronation Street

HDTV

20:00 - 20:55

Mute STTLAD TEXTMulti Audio

20:35

Now

All DVB Channels

Select favouritesInfo

Bad signal

Example : DVB

23 6 745

Channel position and name

Channel type ([Radio], [Data], [HDTV],

etc.) / Encrypted channel ( ) /

TV mode ( , , , )

Programme

Current time

Programme Start / Finish time

(except Analogue)

Channel number, etc. (Analogue)

Progress time indicator of the selected programme

(except Analogue)

[All DVB Channels] , [freesat Channel List], [All

Other Sat. Channels], [All Satellite Channels] or

[Favourites1-4] (p. 57)

•

To switch (DVB or Other Sat. / Satellite)

(blue)

Features available / Message meanings

[Mute]

Sound mute On

[Bad signal]

Poor TV signal quality

[Also in

]

Same programme available as HD broadcast

•

To display the extra information for details

[AD]

Audio Description service available

•

This function can aid visually-

impaired viewers by adding

an additional audio track to

describe events

on screen.

•

For settings (p. 45)

[STLL]

Subtitle service available

[TEXT]

Teletext service available

[Multi Audio]

Multiple audio available

[Stereo], [Mono], [NICAM]

Audio mode

1 - 90

Off Timer remaining time

•

For settings (p. 21)

•

To confirm another tuned

channel name

•

To watch the channel listed in

the banner

•

Information on the next

programme (except Analogue)

•

To hide

•

Extra information (except Analogue)

•

To set display timeout

(Press again to hide the

banner)

[Banner Display Timeout]

(p. 47)

•

[AD], [STTL], [TEXT], [Multi Audio] indications are displayed

as available on particular programmes, but may not be

available for all individual programmes being broadcast.

Display the extra information to confirm availability of these

functions.

Example :

BBC ONE WALES

Coronation Street

20:00 - 20:55

20:35

Now

All DVB Channels

Select favourites

[AD]

Last view

Switch to previously viewed channel or input mode easily

•

Press again to return to the present view.

Note

•

Switching channel is not available while the recording of Timer Programming, Direct TV Recording or

One Touch Recording is in progress.

•

Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.

Watching TV

Hold

Freeze / unfreeze picture

Display the selectable settings for the current status

Check or change the current status instantly

•

To change

access

select

select / change

store

[Multi Audio / AD]

(freesat mode)

Allows you to select between

alternative language or Audio

Description for sound tracks

(if available)

•

Set Audio Description [Auto]

in the Sound Menu (p. 45) to

select the audio description

sound track. In freesat mode,

Audio Description cannot be

controlled separately from the

audio description sound track.

•

This setting is not memorized

and it will return to the default

setting once you exit the

current programme.

[Audio Description]

(DVB mode)

Set to [Auto] if the programme

has Audio Description service,

then you will hear an additional

audio track to describe events

on screen

•

To adjust the volume for Audio

Description

[Audio Description Menu]

(p. 45)

[Multi Audio]

(DVB, Other Sat.

or Satellite

mode)

Allows you to select between alternative

language for sound tracks (if available)

•

This setting is not memorized

and it will return to the default

setting once you exit the current

programme.

[Monaural Audio]

(except Analogue mode)

Allows you to select stereo /

monaural (if available)

•

This setting is not memorized and it

will return to the default setting once

you exit the current programme.

[Sub Channel]

(Other Sat.

or Satellite mode)

Allows you to select the multifeed

programme - sub channel (if available)

[Subtitle Language]

(except Analogue mode)

Allows you to select the language

in which subtitles should appear

(if available)

•

This setting is not memorized and it

will return to the default setting once

you exit the current programme.

[Teletext Character Set]

Sets the teletext language font

[Setup Menu] (p. 46)

[Teletext Language]

(DVB or Satellite mode)

Allows you to select between

alternative language for teletext

(if available)

[NICAM]

(Analogue mode)

Switches NICAM sound

(if available)

[Sound Menu] (p. 44)

[Volume Correction]

Adjusts volume of individual

channel or input mode

[Safely remove USB]

Takes this operation to remove

the connected USB device

safely from the TV

Off Timer

Turn the TV off automatically after a fixed period (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)

1 Display the menu 2 Select [Timer]

Main Menu

Picture

Sound

Timer

Setup

access

select

3 Select [Off Timer] and set the time

Off

minutes

Timer Programming

Off Timer

Auto Standby

minutes

access

select

[Off Timer]

store

select the time

•

To cancel Set to [Off] or turn the TV off.

•

To display the remaining time “Display Information banner” (p. 20)

•

When the remaining time is within 3 minutes, the remaining time

will flash on the screen.

Watching TV

Aspect

Change the aspect ratio (image size)

Enjoy viewing the image at its optimum size and aspect.

Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV

will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 113).

■ If you would like to change the aspect ratio manually

1 Display Aspect Selection list 2 While the list is displayed, select the mode

Aspect Selection

Auto

16:9

14:9

4:3

Zoom1

Zoom2

Zoom3

Select

EXIT

RETURN

Change

Aspect Selection list

store

select

•

You can also change the mode

only using the ASPECT button.

(Press repeatedly until you

reach the desired mode)

[Auto]

The best ratio is chosen and the image expanded to fill the screen.

For details (p. 113)

[16:9] [Zoom1]

Directly displays the image at 16:9

without distortion (anamorphic).

Displays a 16:9 letterbox or 4:3

image without distortion.

[14:9] [Zoom2]

Displays the image at the

standard 14:9 without distortion.

Displays a 16:9 letterbox

(anamorphic) image full-screen

without distortion.

[4:3] [Zoom3]

Displays the image at the

standard 4:3 without distortion.

Displays a 2.35:1 letterbox

(anamorphic) image full-screen

without distortion. At 16:9, displays

the image at its maximum (with

slight enlargement).

Note

•

Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.

•

Aspect cannot be changed in teletext service and 3D mode (except for [2D 3D] mode in [3D Mode

Selection] (p. 38)).

•

Aspect mode can be memorized separately for SD (Standard definition) and HD (High definition)

signals.

Display subtitles

•

Subtitles may not be displayed properly in 3D images.

■ freesat, DVB or Other Sat. / Satellite mode

Display / hide subtitles (if available)

•

To change the language for DVB (if available)

[Preferred Subtitles] (p. 46)

■ Analogue mode

Display subtitles Hide subtitles

Note

•

This is the same as switching to Analogue teletext service and selecting “P888” (subtitle service). (p. 30)

•

You cannot change the channel when this function is active.

Using TV Guide

TV Guide−Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently

broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters).

•

When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take

some time before TV Guide is completely shown.

(freesat)

■

To return to TV

Select freesat

(p. 19)

Display the Channel Genre selection list

Select the genre and view TV Guide

Channel Genre Selection

All Channels

Children

Entertainment

News & Sport

Movies

Lifestyle

Music

Special Interest

Favourites

Radio

Shopping

Gaming & Dating

Interactive

Regional

Example :

select

view

GUIDE

Eastender DIY SOS The Bill

19:30 20:00 20:30 21:00 21:30

The Bill

Red Cap

Good bye

Hot Wars Holiday Program

Pepsi Char.

Emmerdal.

10 O’ clock News BBC

CoastSpring watchPanorama

NewsPop IdolI’m A Celebrity

The Bill

Cinema

Drama

Shop

Sports15 To 1Rugby

20:00 - 20:30 DIY SOS : We open in the Battersbys

1 BBC ONE

BBC 2W

BBC NEWS

BBCi

BBC THRE

BBC FOUR

BBC Radio

BBC ONE101

102

103

104

105

106

107

Coronation Street

Time:

TV Guide Wed 27 Oct 2010 10:46

Wed 27 Oct 2010 Search All Channels

Select channel

View / Timer Prog.

EXIT

Select programme

RETURN

-24 hours +24 hours Search Channel Genre

Info

RETURN

Page up

Also in

Page down

Example :

56 1

Enter Channel

Current date and time

TV Guide time

Channel position and name

TV Guide date

Some programmes may

also be broadcast in HD

•

You can select HD or

SD broadcast before

viewing or setting

Timer Programming.

6 Programme

•

There might be some programmes displayed as greyed-out in TV

Guide. These are the Off-Air programmes (non-running programmes).

■ To change the layout of TV Guide [TV Guide View] (p. 45)

■ To watch the programme

Select a current

programme or channel

2 Select [View]

Eastender

19:30- 20:00

View

Timer Programming

•

If a programme exists in both HD and SD

broadcasts, the [View Options] screen will be

displayed to select HD or SD broadcast.

select

access

101 BBC ONE 19:30-20:00 Wed 27 Oct 2010

119 BBC HD 19:30-20:00 Wed 27 Oct 2010

View Options

DIY SOS

watch

select

watch

select

•

To use Timer Programming

(p. 26)

■ To the previous day ■ To view a channel list of the selected genre

(red)

(blue)

Channel Genre

All Channels

Entertainment

News & Sport

Favourites

•

To list favourite

channels (p. 54)

(Channel Genre list)

■ To the next day

(green)

■ View details of the programme

Select the programme

2 View details

select

•

Press again to

return to TV Guide.

Using TV Guide

(DVB or Analogue)

•

This TV supports the GUIDE Plus+ system.

•

The Rovi branding partner will supply the rating information in the programme information and the

recommended group in the Search list.

•

DVB and Analogue channels are displayed on the same TV Guide screen. [D] means DVB channel

and [A] means Analogue channel. There will be no programme listings for Analogue channels.

■

To return to TV

Select DVB or Analogue

(p. 19)

View TV Guide

GUIDE

OPTION

Das Erste DIY SOS Holiday News

19:30 20:00 20:30 21:00

The Bill

Good bye

Hot Wars Holiday Program

Pepsi Char.

Emmerdal.

10 O’ clock News BBC

CoastSpring watchPanorama

NewsPop IdolI’m A Celebrity

Sports15 To 1Rugby

BBC ONE

20:00 - 20:30 DIY SOS : We open in the Battersbys

1 BBC ONE

BBC THREE

BBC FOUR

BBC 2W

BBCi

BBC Radi

105

719

Coronation Street

Time:

TV Guide

Wed 27 Oct 2010

10:46

Wed 27 Oct Search All Channels

Select channel

Timer Programming

EXIT

Select programme

RETURN

-24 hours +24 hours Search Category

Info

RETURN

Select Advert

Page up

Page down

Also in

Enter Channel

Example :

678 9

Current date and time

TV Guide time

[D] : DVB

[A] : Analogue

Channel position

and name

TV Guide date

Some programmes may also be broadcast in HD

•

You can select HD or SD broadcast before viewing or setting Timer Programming.

8 Programme

Logo of the Rovi branding partner

■ To change the layout of TV Guide [TV Guide View] (p. 45)

■ To watch the programme

Select a current

programme or channel

2 Select [View] (DVB mode)

Eastender

19:30- 20:00

View

Timer Programming

watch

select

•

If a programme exists in both HD and SD broadcasts,

the [View Options] screen will be displayed to select

HD or SD broadcast. (DVB mode)

select

access

101 BBC ONE 19:30-20:00 Wed 27 Oct 2010

119 BBC HD 19:30-20:00 Wed 27 Oct 2010

View Options

DIY SOS

watch

select

•

To use Timer Programming (p. 26)

■

To search programme types and view a channel list of the searched programmes

(yellow)

(Search list)

Search Titles...

Movie

News and Factual

view

select type

■ To search programme titles and view a list of the searched programmes

(yellow)

(Search list)

Search Titles...

Movie

News and Factual

Select

[Search Titles...]

2 Set characters

(maximum: 19 characters)

3 Start

[Search]

•

All the programme

titles including the word

you set will be listed.

•

Searching without

any characters will

list all programmes

including current

programmes.

(green)

access

select

set

•

To use numeric buttons

“Characters table for

numeric buttons” (p. 117)

Using TV Guide

■ To the previous day (DVB mode) ■

To view a channel list of the selected category

(red) (blue)

■ To the next day (DVB mode)