Panasonic TX-39ASW504, TX-42ASW504, TX-32ASW504, TX-50ASW504, TX-24ASW504 User Manual

TX-24ASW504
TX-32ASW504
TX-39ASW504
TX-42ASW504
TX-50ASW504
e
HELP
English
my Home Screen
my Home Screen
•Information 11
•How to use 12
•Settings 13
•OSD Colour 14
•Information 15
•How to use 15
•Settings 16
Watching
Basic
•Basic connection 17
•DVB-via-IP connection 20
•Selecting channel 21
•Information banner 23
•Option Menu 25
•Subtitle 27
•Last view 27
•Off Timer 28
•Energy saving functions 28
•Adjusting time 30
•Language 30
External equipment
•External connection 32
•Watching external input 35
•Operating with TV’s remote control 36
•HDMI features 38
•Terminal information 39
•Valid input signals 40
For best picture
•Viewing Mode 41
- 2 -
•Ambient Sensor 42
•Aspect 42
•Aspect Control Signal 43
•Basic settings 45
•Noise reduction settings 46
•Advanced Settings 46
•Option Settings 48
•Screen Settings 50
•Copy Adjustment 51
For best audio
•Sound mode 52
•Basic settings 53
•Volume settings 54
•Voice Guidance Settings 55
•Audio Description 56
•Advanced settings 57
TV Guide
•Using TV Guide 59
•Timer Programming 62
Teletext
•Viewing Teletext 64
•Teletext mode 66
•Teletext Character Set 67
Tuning and editing channels
•Setting menu 68
•Favourites Edit 68
•Channel List 70
•Auto Setup 71
•Manual Tuning 74
•Update Channel List 76
•New Channel Message 76
•Signal Condition 77
•Other settings 77
- 3 -
•Selectable satellites 78
Recording
USB HDD setup
•Preparations 79
•Setting for USB HDD 80
Recording current programme
•One Touch Recording 82
•REW LIVE TV 83
Timer Programming
•Setting Timer Programming 85
•Editing Timer Programming 87
•Note 88
Technical information
•USB HDD 89
Media Player
Using Media Player
•Information 90
•Selecting device / mode 91
•Network device 93
Photo mode
•Selecting file 94
•Viewing photo 95
•Sorting photos 95
•Using Slideshow 96
Video mode
•Selecting file 100
•Watching video 101
•Video Setup 102
•Audio output settings 103
Recorded TV mode
•Selecting content 105
- 4 -
•Watching recorded TV 106
•Grouping contents 107
•Deleting content 107
•Changing device 108
•Chapter List 108
•Audio output settings 109
Music mode
•Selecting file 110
•Playing music 110
•Music Setup 111
Technical information
•Device handling caution 112
•USB devices 112
•Photo format 113
•Video format 113
•Music format 116
Network
Internet content
•Information 117
•Selecting internet content 118
•Note 119
DLNA
•Information 120
•Using DLNA 123
Network connections
•Internet connection 124
•DLNA connection 125
•Note 127
Network settings
•Network Connection 128
•Custom - Wireless 129
•Custom - Wired 132
- 5 -
•Custom - Wireless Access Point 133
•Network Status 134
•my Home Cloud Settings 134
•VIERA Name 135
•TV Remote App Settings 135
•Network Link Settings 136
•File Sharing Settings 137
•Software Update 137
•New Software Message 137
Photos
•Selecting file 138
•Viewing photo 139
•Using Slideshow 139
Videos
•Selecting file 141
•Watching video 141
•Video Setup 143
•Audio output settings 144
Music
•Selecting file 145
•Playing music 146
•Music Setup 146
DIGA Recorder
•Controlling DIGA Recorder 147
Technical information
•Photo format 148
•Video format 148
•Music format 150
Functions
VIERA Link “HDAVI Control™”
•Summary of VIERA Link 152
•Preparations 156
- 6 -
•Easy playback 156
•Power on Link 157
•Power off Link 157
•Standby Power Save 157
•Intelligent Auto Standby 157
•VIERA Link Control 158
•Speaker Selection 159
•Note 160
Child Lock
•Using Child Lock 161
•PIN number 162
•Parental Rating 162
Data Service Application
•Using Data Service Application 163
•Cookie 163
•Note 164
Common Interface
•Caution 165
•Using Common Interface 166
Shipping Condition
•Shipping Condition 167
Updating the TV Software
•Information 168
•Auto update 168
•Manual update 169
Setting characters
•Using Numeric buttons 170
Keyboard
•Keyboard 171
- 7 -
Settings
Setting menu
•How to use 172
Picture
•Viewing Mode 174
•Basic settings 174
•Ambient Sensor 174
•Noise reduction settings 175
•Advanced Settings 175
•Option Settings 175
•Screen Settings 177
•Copy Adjustment 177
•Reset to Defaults 177
Sound
•Mode 178
•Basic settings 178
•Volume settings 178
•Voice Guidance Settings 179
•Audio Description 180
•Advanced settings 181
•Reset to Defaults 182
Network
•Network Connection 182
•Network Status 182
•my Home Cloud Settings 182
•VIERA Name 182
•TV Remote App Settings 182
•Network Link Settings 182
•File Sharing Settings 182
•Other settings 183
Timer
•Off Timer 184
•Timer Programming 184
- 8 -
•Time Zone 184
•Auto Standby 184
•No signal Power off 184
Setup
•Eco Navigation 185
•USB Device Setup 185
•Recording Setup 185
•Child Lock 185
•Tuning Menu 185
•Language 187
•Display Settings 188
•Common Interface 189
•VIERA Link Settings 189
•Data Service Application 190
•System Menu 191
•Other Settings 191
Support
FAQs
•Picture 192
•Digital TV 193
•Analogue TV 195
•Sound 195
•HDMI 196
•Network 197
•Other 198
Maintenance
•Care and Cleaning 200
Information
•Using Help menu 201
Optional accessories
•Communication Camera 202
•Wall-hanging bracket 202
- 9 -
Licence
•Licence 203
OK Letters enclosed in a box indicate remote control buttons.
Menu Letters in cyan indicate on-screen display items.
References in this eHELP
The images shown in this eHELP are for illustrative purposes only.
- 10 -

my Home Screen

my Home Screen

Information

“my Home Screen” is a gateway to the TV, applications, and more.
It provides easy access to special features such as Media Player, videos, games, communication tools, etc. as shown below (example).
HOME
OK
OK HOME
Home Screen
Selected content screen (TV, application, etc.)
Home Screen Selection
– Your preferred Home Screen can be selected or added.
- 11 -

How to use

Home Screen provides access to special features such as Media Player, TV, internet content, data services, communication tools, etc.
1. Display Home Screen with HOME. (Example)
The last viewed Home Screen is displayed when the TV is turned on.
Press again to select or add your preferred Home Screen layout.
my Home Screen > my Home Screen > Settings
2. Select a feature with / / / and press OK to access.
To watch full-screen TV
1) Select the TV viewer with
/ / / .
(Example)
2) Press OK to watch. (Example)
Also refer to Tutorial from the tool guide.
- 12 -

Settings

Select the setup menu from the tool guide on the top of the screen. (Example)
■ Home Screen Selection
1. Display Home Screen Selection with HOME. (Example)
2. Select the screen with / and press OK to set.
Full Screen TV:
Displays full-screen TV.
TV Home Screen:
To make your TV experience more convenient and comfortable
Lifestyle Screen:
Displays the TV with useful information and services for everyday life.
Info Screen:
Enjoy internet content while watching TV.
■ Settings
You can customise any Home Screen. (For example, changing the wallpaper, renaming freely, editing applications, setting the screen launched when the TV is turned on, etc.)
1. Select Settings from the tool guide.
2. Follow the on-screen instructions.
- 13 -
■ Search
You can search the content from various features.
1. Select Search from the tool guide.
2. Follow the on-screen instructions.
= Note =
To change the colour type of on-screen displays, set OSD Colour.
my Home Screen > my Home Screen > OSD Colour
To use this function fully, you need a broadband network environment. Ensure the network connections and network settings are completed.
Network > Network connections
Network > Network settings
Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use my Home Screen. You can update the software later manually.
Network > Network settings > Software Update

OSD Colour

1. Display the menu with MENU.
2. Select Setup > Display Settings > OSD Colour with to access.
3. Set with
/ and press OK to store.
OSD Colour
(Jet black / Pale grey / Organic brown / Sand beige)
Selects the preferred colour type of on-screen displays.
This function is available for the information banner, menu screen, Home Screen, etc.
/ and press OK
- 14 -

APPS List

Information

Various applications (internet contents, network contents, Media Player, etc.) can be accessed easily from APPS List.
■ APPS List
(Example)
= Note =
APPS List is subject to change without notice.

How to use

You can access special features such as internet contents, network contents, Media Player, etc. from APPS List.
1. Display APPS List with APPS. (Example)
To exit APPS List
EXIT
2. Select an icon of the features with
Internet contents
Network > Internet content
/ / / and press OK to access.
Media Player
Media Player > Using Media Player > Selecting device / mode
Recorded TV
Media Player > Recorded TV mode
Media Server
Network > DLNA > Using DLNA
- 15 -
VIERA Link
Functions > VIERA Link “HDAVI Control™”

Settings

You can customise APPS List (screen settings, etc.).
1. Display APPS List with APPS.
2. Select the icon for settings on APPS List with to access.
3. Follow the on-screen instructions.
= Note =
Setup menu items may be changed without notice.
/ / / and press OK
- 16 -

Watching

Basic

Basic connection

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables.
■ Satellite dish
Satellite terminal
Satellite cable
Satellite dish
For DVB-S
To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
Selectable satellites and dish alignment to tune DVB-S channels
Watching > Tuning and editing channels > Selectable satellites
■ Aerial
Terrestrial / cable terminal
RF cable
Terrestrial aerial / Cable
For DVB-C, DVB-T, Analogue
- 17 -
■ DVD Recorder / VCR
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial / Cable
AV1 (SCART) terminal
SCART cable
- 18 -
■ DVD Recorder (VCR) / Set top box
HDMI terminal
HDMI cable
Set top box
Cable
AV1 (SCART) terminal
SCART cable
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial
= Note =
For VIERA Link connections
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
External equipment and cables shown are not supplied with this TV.
Please also read the manual of the equipment being connected.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor, otherwise distortion of image / sound may occur or operation of other equipment may be affected.
Use a fully wired HDMI compliant cable.
Use a fully wired SCART cable.
Check the terminal type and cable plugs are correct when connecting.
- 19 -

DVB-via-IP connection

It is recommended to connect DVB-via-IP server with the LAN cable.
■ Wired connection
ETHERNET terminal
LAN cable (Shielded)
Use the Shielded Twist Pair (STP) LAN cable.
DVB-via-IP server
Satellite dish / Terrestrial aerial
■ Wireless connection
Built-in wireless LAN (Rear of the TV)
Access point
DVB-via-IP server
Satellite dish / Terrestrial aerial
= Note =
External equipment and cables shown are not supplied with this TV.
Check the terminal type and cable plugs are correct when connecting.
DVB-via-IP function may not work properly depending on the network environment.
- 20 -
To confirm the current network settings
Network > Network settings > Network Status
For details of the connections, read the manual of the DVB-via-IP server.
Additional information for the servers may be found on the following website.
http://panasonic.net/viera/support (English only)

Selecting channel

1. Display TV Selection with TV.
2. Select the mode with
/ and press OK to set.
DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue
The selectable modes vary depending on the channels stored.
You can also select the mode pressing TV repeatedly.
If TV Selection is not displayed, press TV to switch the mode.
3. Select a channel with Channel Up / Down or Numeric buttons.
Press Numeric buttons to select a channel position with 2 or more-digit (e.g. 399, press ).
■ To select a channel from the channel list
1. Display the channel list with OK.
2. Select a channel from the list with
/ and press OK to watch.
To sort channel names in alphabetical order
(red)
To change the category
(blue)
■ To select a channel using information banner
1. Display information banner with if it is not displayed.
2. Select a channel with displayed.
Watching > Basic > Information banner
/ and press OK to watch while the banner is
- 21 -
■ To select a channel using TV Guide
1. Display TV Guide with GUIDE.
2. Select the current programme with access.
– The current programme is displayed on the top left of the screen.
3. Select View with
Watching > TV Guide > Using TV Guide
The postcode entry or update may be required depending on the country you select. Follow the on-screen instructions.
/ and press OK to watch. (DVB)
/ / / and press OK to
■ To watch pay-TV
For information of the encrypted channels
Functions > Common Interface > Using Common Interface
Consult the operator / broadcaster or CI module manufacturer for more information and conditions of the services.
- 22 -

Information banner

Display information banner with .
Also appears when changing a channel. (Example)
Channel position and name
Channel type (Radio, HDTV, etc.) / Encrypted channel ( ) / TV mode ( ,
, , , )
Programme
Start time / End time (except Analogue)
Channel position, etc. (Analogue)
Progress time indicator of the selected programme (except Analogue)
Category
To change the category (DVB)
1) Display the category list with
2) Select the category with
/ and press OK to change.
(blue).
Current time
Features available / message meanings
Bad signal:
Poor quality TV signal
Dolby D+, Dolby D, HE-AAC:
Dolby Digital Plus, Dolby Digital or HE-AAC audio track
AD:
Audio Description service available
This function can aid visually-impaired viewers by adding an additional audio track to describe events on screen.
Watching > For best audio > Audio Description
:
Subtitle service available
- 23 -
:
Teletext service available
:
Multiple audio available
:
Multiple video available
:
Multiple audio and video available
Stereo, Mono:
Audio mode
:
Data service (Hybrid Broadcast Broadband TV application) available
Functions > Data Service Application > Using Data Service Application
190:
Off Timer remaining time
Watching > Basic > Off Timer
To confirm another tuned channel
/
To watch the channel listed in the banner
OK
Information on the next programme (DVB)
To hide the banner
EXIT
Extra information (DVB)
– Press again to hide the banner.
To adjust banner timeout, set Banner Display Timeout.
1) Display the menu with MENU.
2) Select Setup > Display Settings > Banner Display Timeout with
and press OK to access.
3) Set with
/ and press OK to store.
- 24 -
/
To change the colour type of on-screen displays, set OSD Colour.
my Home Screen > my Home Screen > OSD Colour
To display the introduction banner for the internet service
1) Display the menu with MENU.
2) Select Setup > Display Settings > Smart Banner with
/ and press
OK to access.
3) Select On / Off with
/ and press OK to set.

Option Menu

Confirm or change the current status.
1. Display the option menu with OPTION.
2. Select one of the following items with
Voice Guidance Settings / Multi Video / Audio Type / Multi Audio / Dual Audio / Sub Channel / Subtitle Language / Teletext Character Set / Teletext Language / MPX / Volume Correction
The function items vary depending on the TV mode and country you select.
3. Set with
/ / / and press OK to store.
Voice Guidance Settings
/ and press OK to access.
Guidance settings for visually impaired users
Watching > For best audio > Voice Guidance Settings
Multi Video
Selects from a group of multiple videos (if available).
This setting is not memorised and it will return to the default setting once you exit the current programme.
For DVB
Audio Type
Set to Audio Description if the programme has Audio Description service, then you will hear an additional audio track to describe events on screen (if available).
For DVB
To adjust the volume for Audio Description
Watching > For best audio > Audio Description
- 25 -
Multi Audio
Selects between alternative language or Audio Description for sound tracks (if available).
This setting is not memorised and it will return to the default setting once you exit the current programme.
For DVB
Dual Audio
Selects stereo / monaural (if available).
For DVB
Sub Channel
Selects the multifeed programme - sub channel (if available).
For DVB
Subtitle Language
Selects the language for subtitles (if available).
For DVB
Teletext Character Set
Sets the teletext language font.
Watching > Teletext > Teletext Character Set
Teletext Language
Selects between alternative languages for teletext (if available).
For DVB
MPX
Selects multiplex sound mode (if available).
Watching > For best audio > Advanced settings
For Analogue
Volume Correction
Adjusts the volume of each individual channel or input mode.
- 26 -

Subtitle

Display / hide subtitles (if available) with STTL.
To select the preferred language for DVB subtitles (if available), set
Preferred Subtitles.
Watching > Basic > Language
To select the preferred subtitle type
1) Display the menu with MENU.
2) Select Setup > Display Settings > Preferred Subtitle Type with
/
and press OK to access.
3) Select Standard / Hard of Hearing with
/ and press OK to set.
– Hard of Hearing provides aids in understanding and enjoyment with
DVB subtitles (depending on the broadcaster).
Preferred Subtitles 1 / 2 in Language are given priority.
Watching > Basic > Language
= Note =
If you press STTL in Analogue, the TV switches to teletext service and calls up a favourite page. Press EXIT to return to TV mode.

Last view

Switch to a previously viewed channel or input mode easily with LAST VIEW.
Press again to return to the current view.
= Note =
Switching channel may not be available depending on the condition.
Watching less than 10 seconds is not reflected in the previously viewed channel or input mode.
- 27 -

Off Timer

Turn the TV Standby mode automatically after a fixed period with
OFF TIMER.
Press repeatedly until desired time appears.
0 / 15 / 30 / 45 / 60 / 75 / 90 (minutes)
To cancel, set to 0 or turn the TV off.
The remaining time displays on the information banner.
Watching > Basic > Information banner
When the remaining time is less than 3 minutes, the remaining time will flash on the screen.
You can also set the time from Off Timer in the Timer Menu.
1) Display the menu with MENU.
2) Select Timer > Off Timer with
3) Select the time in 15-minute increments with
/ and press OK to access.
/ and press OK to
set.
90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)
– To cancel, set to Off or turn the TV off.

Energy saving functions

The TV can be eco-friendly using energy-saving functions.
The TV will automatically go into Standby mode in the following conditions:
Eco Navigation is set to Set to Eco.
Off Timer is active.
Watching > Basic > Off Timer
No operation is performed for 4 hours while Auto Standby is set to On.
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
= Note =
This function does not affect the recording.
- 28 -
■ Auto Standby
1. Display the menu with MENU.
2. Select Timer > Auto Standby with
3. Select On / Off with
Auto Standby
(On / Off)
Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours.
Automatic input switching with the connected equipment affects this function and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
/ and press OK to set.
/ and press OK to access.
■ No signal Power off
1. Display the menu with MENU.
2. Select Timer > No signal Power off with
/ and press OK to access.
3. Select On / Off with
No signal Power off
(On / Off)
Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes.
The notification message will appear 3 minutes before going into Standby mode.
/ and press OK to set.
■ Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select Set to
Eco to set them to the energy-saving settings at once.
1. Display the menu with MENU.
2. Select Setup > Eco Navigation with
3. Select Set to Eco with
Auto Standby and No signal Power off are active when Eco Navigation is
set to Set to Eco.
/ and press OK to set.
/ and press OK to access.
- 29 -
■ Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is selected.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Radio Mode with to access.
3. Select the time with
20 / 15 / 10 / 5 / Off (seconds)
The sound is active even if the screen turns off. This function is effective in reducing power consumption when listening to a radio channel.
Press any buttons except Standby On / Off switch, Volume Up / Down and
MUTE to turn the screen on.
Not valid in Analogue
/ and press OK to set.
/ and press OK

Adjusting time

Adjusts the time data.
1. Display the menu with MENU.
2. Select Timer > Time Zone with
3. Set with
The time data will be corrected based on GMT.
/ and press OK to store.
/ and press OK to access.

Language

1. Display the menu with MENU.
2. Select Setup > Language with
3. Select one of the following items with
OSD Language / Preferred Audio 1 / 2 / Preferred Subtitles 1 / 2 / Preferred Teletext
4. Set with
OSD Language
Changes language for on-screen displays.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio (depending on the broadcaster).
/ / / and press OK to store.
/ and press OK to access.
/ and press OK to access.
- 30 -
Loading...
+ 176 hidden pages