PANASONIC TX-26LXD70, TX-32LXD70 User Manual

Operating Instructions

LCD Television

English

Please read these instructions before operating your set and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

U.K. Standard

Printed in Czech Republic

Model No. TX-26LXD70

TX-32LXD70

Information on Disposal for Users of Waste Electrical & Electronic Equipment

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Trademark Credits

•

DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).

•

VGA is a trademark of International Business Machines Corporation.

•

Macintosh is a registered trademark of Apple Computer, USA.

•

S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.

•

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.

•

HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.

Licence

(private households)

This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative

on

effects
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

human health and the environment which could otherwise arise from inappropriate

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.

GUIDE

OK

MENU

ASPECT

OPTION

132

465

798

0

VCR

TEXT STTL INDEX HOLD

REC

PROGRAMME

TV

INPUT

DIRECT TV REC

VCR DVD

EXIT

RETURN

7

2

3

Viewing Advanced FAQs, etc.Quick Start Guide

Contents

Turn your living room into a home theatre!

Experience an amazing level of multi-media excitement

•

Safety Precautions ······································ 4

(Warning & Caution)

•

Notes ··························································· 5

•

Maintenance ··············································· 5

Be Sure to Read

Advanced Features

•

How to Use Menu Functions ····················· 21

(picture, sound quality, etc.)

•

DVB Settings (DVB) ·································· 26

(pay-TV, software update)

•

Editing Channels ······································· 28

•

Tuning Channels ······································· 30

•

Restore Settings ······································· 32

•

Owner ID ··················································· 33

•

Input Labels ·············································· 34

•

Displaying PC Screen on TV ····················· 35

•

Recording Controls (DVB) ························ 36

•

Q-Link Functions ······································· 38

•

HDMI Functions ·······································39

(HDMI terminal / VIERA Link)

•

External Equipment ··································· 42

Basic Features

•

Watching TV ·············································· 12

•

Using TV Guide ········································· 14

•

Watching VCR, DVD and Satellites ··········16

•

Viewing Teletext ········································18

Enjoy your TV!

•

Technical Information ································44

•

FAQs ·························································47

•

On screen messages ································ 49

•

Specifications ············································ 51

•

Index ························································· 51

•

Licence ······················································ 52

FAQs, etc.

Accessories / Options

········· 6

Identifying Controls

·············· 7

Basic Connection

·················· 8

Auto Setup

······························ 10

Enjoy rich multi-media

Quick Start Guide

Receive digital terrestrial broadcastings using an integrated (Digital Video Broadcasting) tuner

(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) /
Register and instantly call up favourite programmes with Profile Edit (p. 29))

Sharp pictures with HDMI terminal

Control DVD recorder / VCR via TV with Q-Link connection

(p. 38)

Create home theatre and Panasonic equipment link-ups with
“VIERA Link” without complicated settings!

(p. 40)

Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TX-26LXD70 Declaration of Conformity No 4422, 11 December 2006
TX-32LXD70 Declaration of Conformity No 4423, 11 December 2006

Camcorder

Amplifier with
Speaker system

VCR

DVD player

DVD Recorder

Personal

computer

Satellite receiver

Support Audio Description signal

(p. 13 and p. 22)

Audio description (AD) is an ancillary component associated with a broadcasting which delivers
a verbal description of the visual scene as an aid to understanding and enjoyment particularly, for
visually-impaired viewers.

4 5

Safety Precautions

AC 220-240 V
50 / 60 Hz

Electronic equipment
In particular, do not place video equipment near the TV

(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect

operation of other equipment).

Keep the TV away from these equipment

Warning & Caution

Notes

IMPORTANT: THE MOULDED MAINS PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which is
marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the
three pin mains plug, marked with the letter E or the earth symbol .
How to replace the fuse.

For plug type shown in example 1:

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit
securely into the mains plug (see example 1).

For plug type shown in example 2:

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then
press the fuse cover down securely (see example 2).

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your mains plug, proceed as follows.

IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral Brown: Live

If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.

If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.

If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 5 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark on the body of the fuse.

Handling the mains plug

Ensure that the mains plug is easily
accessible at all times. The On / Off switch
on this model does not fully disconnect the
TV from the mains supply. Remove the
mains plug from the wall socket when the
TV is not used for a prolonged period of
time.

Do not expose to
direct sunlight and other
sources of heat

Avoid exposing the TV to direct sunlight
and other sources of heat. To prevent fire
never place any type of candle or naked
flame on top or near the TV.

Power source

This TV is designed to operate on 220-240V, 50 / 60 Hz AC.

Display panel

Cabinet

Mains plug

Regular care: Gently wipe the surface clean of dirt by using a
soft cloth.
Major contamination: Wipe the surface clean using a soft cloth
dampened with clean water or diluted neutral detergent by
100 times of water. Then, using a soft dry cloth, evenly wipe
the surface clean until it is dry.

Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or
water containing a small amount of neutral detergent. Then,
wring the cloth and wipe the surface clean with it. Finally, wipe
the surface clean with a dry cloth.

Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)

First, remove the mains plug from the socket outlet.

Caution

•

The surface of the display panel has been specially treated
and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.

•

Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances
(this may degrade surface quality).

Caution

Do not remove the cover

Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts inside.

•

Use care not to subject the TV’s surfaces to detergent.
(A liquid inside the TV could lead to product failure.)

•

Use care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).

•

Do not allow the cabinet to make contact with a rubber or
PVC substance for a long time.

Maintenance

Use only the dedicated
stands / mounting
equipment

Using an unauthorized stand or other
fixtures may make the TV shaky, risking
injury. Be sure to ask your local Panasonic
dealer to perform setup.
Use optional stands / mounts (p. 6).

Do not place the TV
on sloped or unstable
surfaces

The TV may fall off or tip over.

Do not expose to rain or
excessive moisture

To prevent damage which might result in
electric shock or fire, do not expose this TV
to rain or excessive moisture.

This TV must not be exposed to dripping or

splashing water and objects filled with liquid,
such as vases, must not be placed on top of
or above the TV.

Do not block the rear
ventilation openings

Ventilation should not be impeded by
covering the ventilation openings with
items such as newspapers, tablecloths and
curtains.

Adjust the LCD panel to your desired angle

(View from the top)

If no signal is received and no operation is performed in TV mode
for 30 minutes, the TV will automatically go to standby mode.

Auto power standby function

Transport only in upright position

Allow sufficient space
around the TV for radiated
heat

10

10

10

10

(cm)

TV Stand

Minimum distance

15° 15°

ASA

Example 1

Example 2

6

7

Quick Start Guide

F TV AV

+

-

-

+

Installing remote’s batteries

Batteries for the Remote
Control Transmitter

(2)

•

R6 (UM3)

Identifying ControlsAccessories / Options

Clamper

•

TMME203

1

Pull
open

Hook

2

Note the correct
polarity (+ or -)

Close

Caution

•

Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such
as alkaline and manganese batteries).

•

Do not use rechargeable (Ni-Cd)
batteries.

•

Do not burn or breakup batteries.

Remote Control
Transmitter

•

EUR7651110

Using the clamper

Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When in
Standby mode, switches TV On.

Mains power
On / Off switch

C.A.T.S. (Contrast Automatic Tracking System) sensor

(senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 22)

Remote control
signal receiver

Changes the
input mode

Function select

•

Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Setup (p. 30)

Cursor buttons to make selections and
adjustments

Standard accessories

•

Identifying Controls

•

Accessories / Options

Check that you have the accessories and items shown

Operating Instructions

Pan European Guarantee Card

DVB LED

•

Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange

Power LED

•

Standby: red
On: green
When using the remote control, indicates the TV has received a command.

Optional accessories

Standby On / Off switch

(Switches TV On or Off standby)

Sound mute On / Off

Changes aspect ratio (p. 13)

Selects programmes in sequence

Teletext (p. 18)

OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.

VCR / DVD operations (p. 17)

Volume

Programme Information (p. 13)

Teletext Index (p. 20)

Coloured buttons used for the
selection, navigation and operation of
various functions

EXIT (Returns to TV screen)

DIRECT TV Recording

To immediately record programme in VCR /
DVD recorder with Q-Link connection

(p. 38)

Programme / channel change buttons (0-9)
and Teletext page buttons.

(p. 12 and p. 19)

When in Standby mode, switches TV On.

Wall-hanging
bracket

TY-WK32LR2W

1 Year Guarantee Registration

CRM (Customer Relationship Management)

WARNING!

•

Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.

Any damage resulting from not having a professional installer

mount your unit will void your warranty.

•

Always be sure to ask a qualified technician to carry out set-up.

Incorrect fitting may cause equipment to fall, resulting in injury

and product damage.

•

Do not mount the unit directly below ceiling lights (such as
spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.

How to remove the TV Stand

Remove four screws and take the

TV Stand.

Rear of
the TV

Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.

Access VIERA Link Menu (p. 41)

TV Guide (p. 14)

Option menu
Sets the selectable settings of viewing
and sound options easily (p. 13)

Subtitles
Showing subtitles

(p. 13)

Changes the input mode
TV -

switches DVB (digital broadcasting)
/ Analogue mode

(p. 12)

AV - changes AV input mode (p. 16)

Returns to the previous menu

Still picture (p. 13)
Teletext Hold (p. 20)

Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 21)

•

Do not bundle the RF cable and mains lead together (could cause
distorted image).

•

Fix cables with clampers as necessary.

•

When using the optional accessory, follow the option’s assembly
manual to fix cables.

To tighten:

Keep the

knob pressed

Rear of the TV

To loosen:

Clamper
(Standard accessory)

Clamper
that bundle
mains lead

Bundle the
cables:

Hook the
clamper:

Tight

Lock

Bottom Sheet

•

TMK0E942

Use when removing the

TV Stand (see below)

Attach the Bottom Sheet.

Bottom of
the TV

OK

132

465

798

0

TV

GUIDE

OK

MENU

ASPECT

132

465

798

0

VCR

TEXT STTL INDEX HOLD

REC

PROGRAMME

TV

INPUT

OPTION

VCR DVD

EXIT

RETURN

DIRECT TV REC

8

9

Quick Start Guide

Basic Connection

DVD Recorder
or VCR

SCART cable
(fully wired)

RF cable

Aerial

Mains leadMains lead

Mains lead

SCART cable
(fully wired)

DVD Recorder or VCR

RF
cable

Aerial AerialRear of the TV Rear of the TV

Rear of the TV

Satellite
receiver

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

•

Basic Connection

Example 1
Connecting aerial

Example 2
Connecting DVD Recorder / VCR

Example 3
Connecting DVD Recorder / VCR and Sattelite receiver

AC 220-240 V
50 / 60 Hz

RF cable

RF cable

RF cable

RF cable

TV only TV, DVD Recorder or VCR TV, DVD Recorder / VCR and Satellite

AC 220-240 V
50 / 60 Hz

AC 220-240 V
50 / 60 Hz

SCART cable
(fully wired)

SCART cable
(fully wired)

RF cable

Note

•

Connect to AV2 for a DVD Recorder / VCR supporting Q-Link (p. 38).

•

Connect to AV1 for a Satellite receiver.

•

If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.

SCART:

21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
RF: Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:

Choose between these three video formats depending on personal preference and equipment requirement.

(RGB - Red, Green and Blue)
VCR: Video Cassette Recorder
DVD: Digital Versatile Disc

L

PC

R

AUDIO OUT

Y

P

B

V

I
D
E
O

A
U
D

I

O

C
O
M

P

R

P
O
N
E
N

L

T

R

PC

R

AUDIO OUT

L

Y

P

B

V
I
D
E
O

A
U
D
I
O

C
O
M

P

R

P
O

N

E

N

L

T

R

L

PC

R

AUDIO OUT

Y

P

B

V
I
D
E
O

P

R

L

A
U
D

R

I
O

C
O
M
P
O
N
E
N
T

RF IN

RF OUT

RF OUTRF IN RF OUTRF INRF IN

10

11

Quick Start Guide

Plug the TV into mains socket and switch On

(Takes a few seconds to be displayed)

1

(example: Owner ID)

Auto Setup

Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.

•

For detailed procedures

“Owner ID” (p. 33)

•

Make a note of the PIN number
in case you forget it.

Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.

■

When inputting owner ID

Auto Setup is now complete and your TV is ready for viewing.

■

When inputting owner ID later

•

You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)

2

•

If you input the ID later

“Owner ID” (p. 33)

•

If a compatible recording equipment
with Q-Link or similar technologies
(p. 38) is connected, analogue
channel information is automatically
downloaded to the equipment.

•

Auto Setup will start to search for
TV channels and store them.

The sorted programme order

depends upon the TV signal,
the broadcasting system and
reception conditions.

•

To check programme list
at-a-glance

TV Guide (p. 14)

•

To edit channels

Editing Channels (p. 28)

Analogue Programme Edit (p. 31)

■

ON SCREEN HELP Instructions box

Open the main menu

Return to the previous menu

Move the cursor / select the menu

Move the cursor / adjust levels / select from a range of options

Access the menu / store settings after adjustments have been made or options
have been set

Many features available on this TV can be accessed via the On Screen Display
menu.

Note

•

If tuning have failed “Auto Setup” (p. 30).

•

If downloading have failed “Download” (p. 23).

•

If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.

■

How to use remote control

•

Auto Setup

Using the
On Screen
Displays

Exit the menu system and return to the normal viewing screen

On-screen operation
guide will help you.

•

Also possible to change the setting
in Picture Menu (p. 22)

3

Select the picture setting

select

set

INPUT

GUIDE

OK

MENU

ASPECT

OPTION

132

465

798

0

VCR

TEXT STTL INDEX HOLD

REC

VCR DVD

PROGRAMME

EXIT

RETURN

DIRECT TV REC

Auto Setup - Digital and Analogue

Digital Scan 21 68
Analogue Scan 21 68

Channel Service Name Type Quality

62

CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62

BBC Radio Cymru
62

E4
62

Cartoon Nwk
29 Analogue
33

BBC1

This will take about 3 mins.

EXIT

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

Please enter new PIN

PIN

EXIT
Change
RETURN

EXIT

* * * *

DVB 10
DVB 10
DVB 10

Analogue

Page up

0 9

Page down

1 of 2Owner ID

PIN entry

-

-

MENU

RETURN

EXIT

1 of 2Owner ID

Please enter new PIN

PIN

EXIT
Change
RETURN

* * * *

Page up

0 9

Page down

PIN entry

Viewing Mode

TV

Please select your preferred viewing mode.

Dynamic Normal Cinema Auto

12

13

Viewing

•

Watching TV

•

To select the two or three-digit programme number, e.g. 39

Watching TV

Select a channel

up

Volume

3

2

Note

•

To watch pay-TV
(p. 27)

Select DVB (Digital Video Broadcasting) or
Analogue

Information banner

Turn power on

Mains power On / Off switch should be On.

(Press for about 1 second)

down

or

1

(in a short time)

•

To select programmes using TV Guide (p. 14)

•

You can also select the mode using the TV button on the top panel
of the TV.

Change
aspect
ratio

A

Change the aspect ratio (p. 44)

Enjoy viewing the picture at its optimum size and aspect.

Aspect Selection list

•

To change the mode

•

To change the mode using the ASPECT button only

A

(Press repeatedly until you reach the desired mode)

Display Aspect
Selection list

A

During the list is displayed,
select the mode

Store

■

Other useful functions (Operate after )

Freeze / unfreeze picture

Hold

Display
subtitles

Display / hide subtitles (if available)

•

To change the language for DVB

“Preferred Subtitle” (p. 23) (If available)

Display the
current
programme
status

Check or change the current
programme status instantly

•

To change

Subtitle Language (DVB mode)

Possible if the programme has some languages of subtitles

Multi Audio (DVB mode)

Possible if the programme has some languages of sounds

NICAM (Analogue mode)

Sound Menu (p. 22)

Volume Correction

Adjusts volume of individual channel or input mode

Audio Description (DVB mode)

This function can aid visually-impaired viewers by adding an additional audio track to

describe events on-screen.
Select “On” if the programme has this signal, then you will hear the description sound

select

change

Note

•

Also possible to change the settings in Menu list (p. 22 and p. 23).

■

Other useful functions (Operate after )

Display
information
banner

Display programme information

•

To set display timeout

“Banner Display Timeout” (p. 23)

•

To hide

•

Appears also when changing channel.

•

Information of another channel

•

Information on next programme

(DVB)

•

To watch the programme listed in the banner

•

Information banner operation

1st press
Display banner

2nd press
Banner + programme synopsis
(DVB)

3rd press
Exit

Sound
mute

Scrambled
broadcasting

Teletext

Multiple audio

Off timer

Features available

Programme
DVB: Programme

Start / Finish time

Analogue: Programme

Status

Channel Current time Category

To change the category

Weak TV signal

Subtitle

Audio
description

•

“AD”, “Subtitles”, “TXT”, “Multi-Audio” indications are displayed
as available on particular channels or services, but may not be
available for all individual programmes being broadcast.

Press the button twice to confirm availability of these functions.

Example:

Off Timer

Main Menu

VIERA Link

Picture

Sound

Setup

1/2

DVB Timer Programming

DVB Profile Edit

DVB Service List

Q-Link Settings

Child Lock

Tuning Menu

Off Timer

Power on Preference

Teletext FASTEXT

TV

Setup Menu

Off

Display the
menu

Select “Setup”

access

select

Select “Off Timer” and set the time

set

select

•

To cancel Set to “Off” or turn the TV off

•

To display the remaining time Information banner (p. 13)

•

When the remaining time is within 3 minutes, the remaining time will flash on screen.

Turn the TV off automatically after a fixed period

INPUT

GUIDE

OK

MENU

EXIT

RETURN

DIRECT TV REC

ASPECT

OPTION

132

465

798

0

VCR

TEXT INDEX

STTL HOLD

REC

VCR DVD

PROGRAMME

TV

MENU

3

1 BBC ONE WALES

Corontation Street
20 : 00 ~ 20 : 55

9

Profile 1

23:35

Change category

For info press

Now

132

465

798

0

VCR

SPECT

HOLD

STTL

OPTION

1 BBC ONE WALES

Corontation Street
20 : 00 ~ 20 : 55

Mute Bad Signal Encrypted

SPECT

23:35

Now

SubtitlesAD TXT Multi-Audio 45

SPECT

Change category

For info press

Profile 1

EXIT

1 BBC ONE WALES

Corontation Street
20 : 00 ~ 20 : 55

Mute Bad Signal Encrypted

[AD]

23:35

Now

Subtitles TXT Multi-Audio 45

AD

All DVB Services

Change category

Exit info

Aspect Selection

Auto

16:9
14:9
4:3
Zoom1
Zoom2
Zoom3

Select

Change

EXIT

RETURN

blue

14

15

Viewing

■

To change the layout

(Landscape / Portrait)

■

To previous day (DVB mode)

■

To next day (DVB mode)

■

To view a
programme list
of the selected
category

■

To view a
programme list
of the selected
type
(DVB mode)

Using TV Guide

Portrait (Displays by time)

select
category

TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
Analogue broadcasts will be listed after DVB broadcasts. “D” means DVB channel and “A” means
Analogue channel.

TV Guide
date

Programme (TV Guide start page)

View TV Guide (landscape or portrait)

select
type

Current date and time

(Category list)

(Type list)

To list favourite channels (p. 29)

■

To return to TV

view

view

Landscape

(Displays by

broadcaster)

View “Portrait” to see one channel at a time
View “Landscape” to see many channels

Note

•

When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.

•

Using TV Guide

■

Other useful functions (Operate after viewing TV Guide)

TV Guide
time

Channel

Only analogue TV channels are listed

View details
of the
programme
(DVB mode)

Select
the programme

select

Details

To return
to the start page

View details

Timer
programming
to record
(DVB mode)

DVB LED

Select the programme to be broadcast

■

To check / change / cancel a timer
programming event

“Timer Programming” (p. 36)

•

Orange DVB LED
(Rapid blinking during recording)

(Timer Programming screen)

select

set

■

To return to TV Guide

DVB LED will turn on if Timer
Programming is set.

Note

•

When recording programmes, you must make the proper settings on the external
recording equipment connected to the TV.
If a compatible recording equipment with Q-Link or similar technologies is connected to
the TV (p. 8) and the “Q-Link Settings” (p. 23) are completed, no setting of the equipment
is required.
Also read the manual of the recording equipment.

•

If you select the programme now on the air, the confirmation screen whether watching or
recording will appear. Select “Timer Programming” to record from the time you finish the
Timer Programming setting.

Watch the
programme

(TV screen)

Select the channel
or programme
now on the air

select

access

select

access

Select “View”

(DVB)

GUIDE

OK

MENU

ASPECT

OPTION

132

465

798

0

VCR

TEXT STTL INDEX HOLD

REC

PROGRAMME

TV

EXIT

INPUT

EXIT

RETURN

DIRECT TV REC

VCR DVD

GUIDE

Prog.Types

All Types

1 BBC ODDDDDDD7 BBC T 14 E4 70 CBBC 105 BBCi72 Cartoo 719 BBC R

POP 100
Rugby
Cinema info
News

Select programme

EXIT

Timer Programming

-24 Hr

Select channel
RETURN

+24 Hr Prog.type Category

green

yellow

TV Guide : Landscape Wed 05/08/04 18:50

Fri 6th

20:00 - 20:30 DIY SOS : We open in the Battersbys

1

D

7

D

14

D

70

D

72

D

105

D

719

D Rugby 15 To 1 The Bill

Change display mode

Timer Programming

19:30

Time: 20:00 20:30 21:00 21:30

BBC ONE

Eastender DIY SOS The Bill Red Cap

BBC THR

Hot Wars Horiday Program

E4 Emmerdal. Coronation Street The Bill

CBBC Cha

10 O’ clock News BBC Pepsi Char. Good bye Hello

Cartoon Panorama Sex And The City Terminator

BBCi I’m A Celebrity Pop Idol News The

BBC Radi

Select channel

EXIT
Select programme Info

-24 Hr +24 Hr Prog.type Category

RETURN

GUIDE

S o

S o

Hel l

Hel l

Th e

Th e

Change display mode

red

blue

Prog. typ e

All T ype s

All T ype s

21:0 0 21:3 0

21:0 0 21:3 0

Movie s

Red Ca p

Red Ca p

New s

The Bil l

The Bil l

Entertainmen t

Good by e

Good by e

Spor t

T erminato r

T erminato r

Children’s

New s

New s

Educatio n

The Bil l

The Bil l

Lifestyl e

Dram a

Categor y

Categor y

All Service s

All Service s

All Service s

All Service s

All DVB Services

All Analogue Services

Free TV

Free TV

Pay TV

Pay TV

Radio

Radio

Information

Information

Profile 1

Profile 1

Profile 2

Profile 2

Profile 3

Profile 3

Profile 4

Profile 4

Category

All Services

So

Page up

Page down

Prog.Types

All Types

Category

All Services

Eastender
19:30- 20:00

View

Timer Programming

TV Guide Wed 05/08/04 18:50

DVB Timer Programming Wed 05/08/04 18:50

Pos. Name Date Start End min.

13BBC1

ITV1

Select timer

EXIT

Edit timer

RETURN

Delete

Timer Programming

EXIT

Return to List

RETURN

6/8 FR

18:00

20:00

7/8 SA

0 9

12060Off

21:30

22:30

Off

RETURN