Information on Disposal for Users of W aste Electrical & Electronic Equipment
(private households)
T his s ymbol on t he produ cts and / or a cc ompan y ing do c umen ts means t ha t u s ed ele ct rical an d
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternativel y , in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Di s posing o f t hi s produc t c orrec t ly will help t o s ave v aluable resources and pre v en t any po t en t ial nega t iv e
on
effects
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
human health and the environment which could otherwise arise from inappropriate
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method
of disposal.
Operating Instructions
Plasma Television
Model No. TH-65PX600B
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
The attached speakers illustrated above are sold separately.
DIRECT
TV REC
SD CARD
IDTV
Model Number Serial Number
6
Printed in Czech Republic
U.K. Standard
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Contents
Full HD Plasma Panel
This TV uses a high definition plasma panel (1920 × 1080 pixels) to produce high definition pictures
close to their original resolution.
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) /
Register and instantly call up favorite programmes with Profile Edit (p. 28))
Sharp pictures with HDMI terminal
Control DVD recorder / VCR via TV with Q-Link connection
Create home theatre and DVD recorder link-ups with
Index ························································· 55
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-65PX600B Declaration of Conformity No 3979, 19th January 2006
23
•
Safety Precautions
Notes
Warning & Caution
Due to weight and size please ensure a qualifi ed technician installs this product
Handling the mains plug
Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully disconnect the TV
from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Note
If the TV is not switched off when the TV station stops transmitting, it will automatically go to standby mode after
30 minutes. This function will operate only in Analogue TV mode.
Power source
This TV is designed to operate on 220-240V, 50 / 60 Hz AC.
Do not expose to
direct sunlight and
AC 220-240 V
50 / 60 Hz
other sources of heat
Avoid exposing the TV to direct sunlight
and other sources of heat. To prevent
fire never place any type of candle or
naked flame on top or near the TV.
Do not expose to rain or
excessive moisture
To prevent damage which might result in electric
shock or fire, do not expose this TV to rain or
excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid,
such as vases, must not be placed on top of or
above the TV.
Do not block the rear
ventilation openings
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths and curtains.
Allow sufficient space around
the TV for radiated heat
10
Do not display a still picture for a long time
This causes the image to remain on the plasma
screen ("after-image").
This is not considered a malfunction and is
not covered by the warranty.
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
Computer image
To prevent after-image, the screen saver is
automatically activated after a few minutes if no signals
are sent or no operations are performed. (p. 50)
12
4 : 3
Keep the TV away from these equipment
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Maintenance
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
Do not remove the cover
Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 10 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: – THIS APPARATUS MUST BE EARTHED.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is
marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug
which is marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
ASA
or the BSI mark on the body of the fuse.
10
Do not place the TV on
sloped or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated
stands / mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent
and water. Do not use solutions containing
benzol or petroleum.
TV can produce static electricity, care must be
taken whenever touching the TV screen.
Do not allow children to
handle SD card
As with an small object, SD card can be
swallowed by young children. Please remove
SD card immediately after use.
10
7
6
(cm)
First, remove the mains plug from the socket outlet.
Display panel
Daily care: Gently wipe the surface clean of dirt by using
a soft cloth.
Major contamination: Wipe the surface clean using a soft
cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry
cloth, evenly wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially
•
treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.
Use care not to subject the surface to insect repellent,
•
solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water
or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it.
Finally, wipe the surface clean with a dry cloth.
Caution
Use care not to subject the TV's surfaces to detergent.
•
(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to insect repellent,
•
solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber
•
or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)
45
PULL
Standard accessories
Remote Control
Transmitter
N2QAYB000071
•
Clamper (2)
TMME258
•
IDTV
Installing remote's batteries
Check that you have the accessories and items shown
Batteries for the Remote
Control Transmitter
R6 (UM3)
•
Mains Lead
K2CT3DH00025
•
(2)
Operating Instructions
Pan European Guarantee Card
1 Year Guarantee Registration
CRM
(Customer Relationship Management)
Ferrite core (4)
J0KF00000018 (Small size) × 1
•
J0KG00000014 (Large size) × 3
•
Attaching the cable clampers
Pull
open
Rear of the TV
1
Hook
Close
2
Snap open
Note the correct
polarity (+ or -)
Snap shut
Caution
Incorrect installation may cause battery
•
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or breakup batteries.
•
Optional accessories
SpeakersPedestalWall-hanging bracket
TY-SP65PV600
•
•
Do not bundle the RF cable and mains lead together (could cause
•
distorted image).
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
•
manual to fix cables.
TY-ST65PV500
Remove from the TV
(vertical)
TY-WK65PV7
•
Push both side
hooks and pull out
Identifying ControlsAccessories/Options
STR (Normalisation store)
Stores tuning and other
()
function settings
SD CARD slot (p. 39)
MAINS Power
On / Off switch
Power LED
Standby: red
•
On: green
When using the remote control,
indicates the TV has received a
command.
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 23)
DVB LED
Active for Timer Programming or
•
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange
Increases or decreases the programme position by one. When
a function is already displayed, press to increase or decrease
the selected function. When in Standby mode, switches TV On.
To immediately record programme in VCR /
DVD recorder with Q-Link connection (p. 40)
Viewing SD Card (p. 38)
Sound mute On / Off
Switch between viewing TV or AV input.
(p. 16)
Cursor buttons to make selections and
adjustments
EXIT (Returns to TV screen)
Coloured buttons used for the
selection, navigation and operation of
various functions.
Still Picture (p. 13)
Teletext Index (p. 20)
Programme Information (p. 13)
Volume
VCR / DVD operations (p. 17)
HDMI3 terminal
(p. 44)
Quick Start Guide
•
•
Identifying Controls
Accessories/Options
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
•
contractor to secure the wall-hanging bracket.
Carefully read the instructions accompanying the speakers or pedestal, and be absolutely sure to take steps
•
to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
67
•
Normalises
(Resets all settings to their default levels)
(p. 22)
MULTI WINDOW (p. 13)
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
Connecting aerial
(TV only)
1
Ex.
AerialAerial
Rear of the TVRear of the TV
Mains lead (supplied)Mains lead (supplied)
RF
cable
AV1
RGB
VIDEO
AV2
(Q-Link)
VIDEO
S VIDEO
AV3
(Q-Link)
RGB
VIDEO
S VIDEO
COMPONENT
Ex.
2
AV1
RGB
VIDEO
Connecting DVD Recorder (VCR)
(TV, DVD Recorder and VCR
AV2
(Q-Link)
VIDEO
S VIDEO
AV3
(Q-Link)
RGB
VIDEO
S VIDEO
COMPONENT
)
3
Ex.
Rear of the TV
AV1
AV2
(Q-Link)
RGB
VIDEO
VIDEO
S VIDEO
Connecting DVD Recorder (VCR) and Satellite receiver
TV, DVD Recorder, VCR and satellite
(
AV3
(Q-Link)
COMPONENT
RGB
VIDEO
S VIDEO
)
Clamper
To unfasten
•
Aerial
RF cable
AC 220-240 V
50 / 60 Hz
Quick Start Guide
•
Basic Connection
within
10 cm
Ferrite core
Pull back the
tabs to open
Press the cable
through and close
(Large size)
DVD Recorder or VCR
RF OUT
RF IN
SCART cable
(fully wired)
RF cable
RF cable
Note
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 40).
•
Connect to AV1 for a Satellite receiver.
•
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
•
SCART:
RF: Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
VCR: Video Cassette Recorder
DVD: Digital Versatile Disc
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue)
within
10 cm
SCART cable
(fully wired)
within
10 cm
Ferrite core
(Large size)
SCART cable
(fully wired)
RF cable
SCART cable
(fully wired)
Satellite receiver
Mains lead (supplied)
DVD Recorder
or VCR
RF OUT
RF IN
RF OUT
RF IN
RF IN
RF cable
RF cable
89
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
You can now use the remote
•
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
2
DVB Auto Setup
Please W ait !
Prog. Channel Service Name NetID. TS ID. Quality
4
30
BBC NEWS 24
5
30
BBCI
6
30
CBBC Channel
7
30
BBC Radio W ales
8
30
This will take about 3 mins.
■
BBC Radio Cymru
Exit
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
When inputting owner ID
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
Owner ID
PIN NUMBER :
NAME :
HOUSE NO :
POSTCODE :
012345678 9
Change character
Select character
Store Owner ID
Exit
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
If in Analogue mode
Select DVB
1
View TV Guide (landscape or portrait)
View "Portrait" to see one channel at a time
View "Landscape" to see many channels
Current date and time
Categor y
Categor y
All Service s
All Service s
DI Y SO S
Coronation Stree t
Sex And The Cit y
15 T o 1
DVB TV Guid e
W ed 12t h
1 BBC 1 2 BBC 2 44 Channel 4 444 SC 4
19:30~20:0 0
20:00~20:3 0
20:30~21:0 0
21:00~22:0 0
22:00~22:3 0
22:30~23:0 0
23:00~23:1 0
23:10~00:0 0
Change display mode
Select Programme
Select channel
T imer Programming
Exit
To list favourite
channels (p. 29)
Landscape
green
yellow
DVB TV Guid e
Fri 6t h
red
blue
Programme(TV Guide start page)
:Landscap e
20:00-20:3 0
1
BBC1
2
BBC2
21
ITV1
44
Channel4
122
five
142
ITV2
SC4
144
All Services
All Services
All Services
All Services
Free TV
Free TV
Pay TV
Pay TV
Radio
Radio
Information
Information
Profile 1
Profile 1
Profile 2
Profile 2
Profile 3
Profile 3
Profile 4
Profile 4
All Types
21:0021:30
21:0021:30
Movies
Red Cap
Red Cap
News
The Bill
The Bill
Entertainment
Good bye
Good bye
Sport
Terminator
Terminator
Children’s
News
News
Education
The Bill
The Bill
Lifestyle
Drama
DIY SOS: W e open in the Battersdy s
T ime : 19:3 0 20:0 0
Eastende r
Hot W ar s
Emmerdal .
'
clock News BB C
10 O
Panorom a
I'm A Celebrit y
Rugb y
Change display mode
Select channel
Select Programme
T imer Programming
Exit
-24 H r +24 H r
Category
Category
Prog. type
All Types
So
So
Hell
Hell
The
The
(Category list)
(Type list)
Thu 05/08/04 18:5 0
Prog. typ e
All T ype s
20:3 0 21:0 0 21:3 0
The Bil l
Holiday Progra m
Pepsi Cha r .
Pop Ido l
Info
Categor y Prog. typ e
: Portrai t
Eastender
DlY SOS
The Bill
Red Cap
Live junction
POP 100
Cinema info
Sports
+24 H r
Red Ca p
The Bil l
Good by e
T erminato r
New s
The Bil l
Page u p
Page dow n
Categor y
Categor y
All Service s
All Service s
Info
Portrait (Displays by time)
W ed 12/05/04 10:4 6
Page dow n
Categor y Prog. typ e
select
category
view
select
type
view
S o
Hel l
Th e
Prog. typ e
All T ype s
Page u p
IDTV
To return to TV
■
2
TV Guide
date
TV Guide
time
Channel
(Displays by
broadcaster)
To change the layout
■
(Landscape / Portrait)
To previous day
■
To next day
■
To view a
■
programme list
of the selected
category
To view a
■
programme list
of the
selected type
Other useful functions (Operate after )
■
View details
of the
programme
Select
the programme
select
View details
DVB T V Guide
View Programme
Return to List
Exit
Thu 05/08/04 18:4 9
Details
To return
to the start page
Select the programme now on the air
select
(TV screen)
Watch the
programme
watch
Select the programme to be broadcast
Turn On the DVB LED
and select the recording device
select
Timer
set
programming
to record
To check / change / cancel a timer
■
programming event
"Timer Programming" (p. 36)
Note
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
•
before the TV Guide is completely shown.
When recording programmes, you must make the proper settings on the external recording equipment connected
•
to the TV.
If a compatible recording equipment with Q-Link or similar technologies is connected to the TV (p. 8) and the
"Q-Link" settings (p. 25) are completed, no setting of the equipment is required.
Also read the manual of the recording equipment.
•
(Timer Programming screen)
DVB Timer Programming
Pos.
Name
Date Start End
13BBC1
ITV1
Select timer
Edit timer
Exit
Return
Delete
Thu 05/08/04 18:49
18:00
21:30
0 9
20:00
22:30
min.
12060Off
Off
6/8 FR
7/8 SA
DVB LED
Orange DVB LED
•
(Rapid blinking during recording)
To return to TV Guide
■
In Analogue – Analogue Programme Guide (Analogue mode)
The Analogue Programme Guide shows channel list only. (No programme info in Analogue mode)
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Turn the TV on
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
1
■
Receives input signals automatically when playback starts or
satellite receiver is switched on
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function will be available for HDMI connection too (p. 41).
•
If input mode is not switched automatically
■
Perform and
Dependant on DVD/VCR setup
•
Select the external input
2
(AV mode screen)
Screen display
Terminal
Manual input
selection
Auto input
selection
AV1AV2AV 3AV 4
AV1
EC1/RGB
AV1/RGB
(RGB input)
AV2
AV2S
(S-video input)
EC2
AV3
AV3 S
(S-video input)
EC3/RGB
AV3/RGB
(RGB input)
Component
AV4
AV4S
(S-video input)
Component
――
HDMI1 HDMI2 HDMI3
PC
HDMI1 HDMI2 HDMI3
PC
EC/
―
HDMI1
HDMI2 HDMI3
Select the connector
connected to the equipment
Displays the selected connector
3
blue
Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
∗
Viewing
To return to TV
■
red
red
AV1AV2/
example: AV1
•
When colour bar disappears Press any coloured buttons
•
You can also select the connector using the TV/AV button on the front panel
•
of the TV.
Press the button repeatedly until you reach the connector to view.
If the external equipment has an aspect adjustment function, set to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
•
HDMI (p. 41)
•
Note
green
S-video
yellow
AV3/
S-video
red
PC
green
AV4/
S-video
blue
yellow
Component/
PC
(twice)
yellow
HDMI1/2/3
blue
HDMI1/
HDMI2/
HDMI3
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Setting your remote control to operate Panasonic VCR, DVD, etc.
∗
Set the VCR / DVD switch to the appropriate positionPress and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
"VCR" position
EquipmentCode
VCR10 (default)
DVD11
"DVD" position
EquipmentCode
Player home theatre
DVD70 (default)
Press
71
•
Watching VCR, DVD and Satellites
Note
Confirm correct operation after code changed.
•
The codes will be reset to default values if batteries are replaced.
•
"DVD" means DVD player, DVD recorders and Recorder home theatre.
•
1617
Some operations may not be possible on some equipment models.
•
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.