Panasonic TH-58PZ800U Owner’s Manual
58"
Panasonic
Operating Instructions
Class 1080p Plasma HDTV
(58.0 inches measured diagonally)
Manual de instrucciones
Televisi6n de alta definici6n de
(See page 6-15)
(vea la pagina 6-15)
1080p y clase 5877de Plasma
(58,0 pulgadas medidas diagonalmente)
Model No.
N_mero de mode,o TH-58PZ800U
u_ _ y7
For assistance (U.S.A.), please call:
1-877-95-VlERA (958-4372)
or visit us at www.panasonic.com/contactinfo
For assistance (Puerto Rico), please call:
787-750-4300
or visit us at www.panasonic.com
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
(
I
H_N'Ill
English
Espahol
Para solicitar ayuda (EE.UU.), lame al:
1-877-95-VlERA (958-4372)
6 visitenos en www.panasonic.com/contactinfo
Para solicJtar ayuda (Puerto Rico), Ilame al:
787-750-4300
6 visitenos en www.panasonic.com
High Definition Sound HD3D Sound
Please read these instructions before operating your set and retain them for future reference.
)
The images shown in this manual are for illustrative purposes only.
Lea estas instrucciones antes de utitizar su televisor y guardetas para consultartas en et futuro.
)
Las imagenes mostradas en este manual tienen solamente fines itustrativos.
TQB2AA0800
Turn your own living room into a movie theater!
Experience an amazing level of multimedia excitement
This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable
antenna, after the end of full-po,Ner analog TV broadcasting in the United States (as required by law) on February 17
2009. Some older television receivers, if they rely on a TV antenna, wi] need a TV Converter to receive over the air digital
programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations sti]
broadcasting in analog, watching pre-recorded movies, or playing video games). When a Converter is used with an older
television receiver, a signal splitter might be necessary to continue to receive low-power analog broadcasts via an antenna
For more information, please see www.DTV.gov. For information on the TV Converter program, and on government
coupons that may be used toward the purchase of one. see www.dtv2OO9.gov, or call the NTIA at 1-888-DTV-2009. Please
check with your cable or satellite service provider if you have questions about your cable or satellite set-top box.
bi kTM
Gal_eryPlayer
SDHC Logo is a trademark.
GalleryPlayer and the GalleryPlayer Logo are
trademarks of GalleryPlayer, Inc.
BBE_ViVA
HD3D Sound
Manufactured under license
from BBE Sound, inc.
Licensedby BBESound,Inc.underoneor moreofthef01]0wingUS
BBEandBBEsymb01areregisteredtrademarksofBBESound,Inc.
High Definition Sound
patents:5510752,5736897.
2
VIERA LinkTM is atrademark of Matsushita Electric
IndustrialCo., Ltd.
1.41_l"n| TM
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Camcorder
Conte ts
Please read before using the unit
® Safety Precautions ....................................... 4
® Notes ............................................................ 5
Enjoy your TV!
Basic Features
@ Watching TV ............................................... 16
@ Viewing from SD Card ............................... 18
@ Watching Videos and DVDs ....................... 20
@ Displaying PC Screen on TV ..................... 22
VCR set Top Box
Amplifier
Home theater
system
DVD recorder/ DVD player/
Blu-ray Disc recorder Blu-ray Disc player
HDAVI Control TM
HDAVI Control TMis a trademark of
Matsushita Electric Industrial Co., Ltd.
EZ Sync TM
EZ Sync TM isa trademark of
MatsushitaElectricIndustrial
Co.,Ltd.
Personal
computer
f,l r4
I
Advanced Features
® How to Use Menu Functions
(picture, sound quality, etc.) ....................... 24
@ VlERA LinkTM "HDAVl Control TM'',............... 28
® Lock ........................................................... 32
® Editing and Setting Channels .................... 34
@ Closed Caption .......................................... 36
@ Input Labels/Monitor Out ........................... 37
® Using Timer ................................................ 38
® Programming the Remote to Operate
Peripheral Equipment ................................ 39
® Recommended AV Connections ................ 40
FAQs, etc.
® Remote Control Operation/Code List ......... 42
® Ratings List for Lock .................................. 45
® Technical Information ................................. 46
® FAQ ............................................................ 50
@ Care and Cleaning ..................................... 52
@ Specifications ............................................. 53
® Limited Warranty (for U.S.A.) ..................... 54
® Customer Services Directory (for U. S. A.) ..55
® Limited Warranty (for Canada) ................... 56
Manufactured under license from Dolby Laboratories.
DOLBY and the double-D symbol are
trademarks of Dolby Laboratories.
3
[]
S
fety P
CAUTION
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING:
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
lo)
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.
The lightning flash with
arrowhead within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock
to persons.
The exclamation point
within a triangle is
intended to tetl the user
that important operating
and servicing instructions
are in the papers with the
appliance,
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic
Corp. of North America could void the user's authority to operate this device.
FCC Declaration of Conformity
Model No. TH=58PZ800U
Responsible Party:
Contact Source:
emait:
CANADIAN NOTICE:
For Model TH-58PZ800U
This Class B digital apparatus complies with Canadian ICES-003.
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIERA (958-4372)
c°nsumerpr°ducts@panas°nicc°m
4
Z_ WARNING
Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
discard unneeded small parts and other objects, including
packaging materials and plastic bagslsheets to prevent
them from being played with by young children, creating
the potential risk of suffocation.
==if problems occur during use
if a problem occurs (such as no picture or no sound), or if
smoke or an abnormal odor is detected from the Plasma
TV, unplug the power cord immediately.
_ Continued use of the TV under these conditions might cause
fire or permanent damage to the unit. Have the -IV evaluated
at an Authorized Service Center. Servicing of the TV by any
unauthorized personnel isstrongly discouraged due to its
high voltage dangerous nature.
if water or foreign objects get inside the Plasma TV, if the
[] Set up Plasma TV is dropped, or if the cabinet becomes damaged,
Do not place the Plasma TV on sloped or unstable surfaces, disconnect the power cord plug immediately.
_3_The Plasma TV may fall off or tip over. ® A short may occur, which could cause fire. Contact an
Do not place any objects on top of the Plasma TV. Authorized Service Center for any repairs that need to be
_, If water spills onto the Plasma TV or foreign objects get made.
inside it, a short-circuit may occur which could result in fire
°retectricsh°cklfanyf°reign°bjectsgetinsidethePlasma [Z _ ]
TV, please consult an Authorized Service Center. CAUTION
This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories may
cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by
Matsushita Electric Industrial Co., Ltd.)
• Walt-hanging bracket (Vertical) TY-WK42PV4W
Always be sure to ask a qualified technician to carry out set-up.
@ Two or more people are required to install and remove the
television. If two people are not present, the television may
be dropped, and personal injury may result.
Transport only in upright position!
_ Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
[] AC Power Supply Cord
The Plasma TV is designed to operate on 120 VAC, 60 Hz.
Securely insert the power cord plug as far as it will go.
® If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.
The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.
® Doing so may cause fire or electric shocks.
Do not handle the power cord plug with wet hands.
_ Doing so may cause electric shocks.
Do not do anything that might damage the power cord. When
disconnecting the power cord, hold the plug, not the cord.
® Do not make any modifications to, place heavy objects on,
place near hot objects, heat, bend, twist or forcefully pull the
power cord. Doing so may cause damage to the power cord
which can cause fire or electric shock. If damage to the cord is
suspected, have it repaired at an Authorized Service Center.
Do not cover the ventilation holes.
® Doing so may cause the Plasma TV to overheat, which can
cause fire or damage to the Plasma TV.
Leave a space of 3 15116" (10 cm) or more at the top, left
and right, and 2 3/4" (7 cm) or more at the rear.
When using the pedestal, keep the space between the
bottom of the TV and the floor surface.
[] When using the Plasma TV
Be sure to disconnect all cables before moving the Plasma
TV.
® Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any cleaning.
® Electric shocks can result if this is not done.
Clean the power cord plug regularly to prevent it from
becoming dusty.
_ Built-up dust on the power cord plug can increase humidity
which might damage the insulation and cause fire. Unplug the
cord from the wall outlet and clean it with a dry cloth.
This Plasma TV radiates infrared rays; therefore, it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step.
(Young children should be made particularly aware of this
caution.)
® If the unit falls over or becomes damaged through misuse,
injury may result.
The TV will still consume some power as long as the power
cord is inserted into the wall outlet.
otes
[] Do not display a still picture for a long time
This causes the image to remain on the plasma screen
("Image retention"). This is not considered a malfunction and
is not covered by the warranty.
Typical still images
_ Channel number and other togos
® Image displayed in 4:3 mode
_ SD Card photo _ Video game _ Computer image
To prevent "Image retention",
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations are
performed. (p. 51)
m Set up
® Do not place the unit where it's exposed to sunlight or other
bright light (including reflections).
® Use of some types of fluorescent lighting may reduce the remote
control's transmission range.
5
Accessories/Optional Accessory
d Check you have all the items shown.
Accessories
[] Remote Control
Transmitter
e N2QAYB000220
[] AC cord [] Pedestal
[] Operating Instructions [] Product Registration Card (U.S.A.)
[] Quick Setup Guide [] Customer Care Plan Card (U.S.A.)
(For viewing HD programming)
[] Batteries for the
Remote Control
Transmitter (2)
® AA Battery
e TBLX0080
How to assemble (p. 7)
[] Cable clamper
Optional Accessory
[] Cleaning cloth
Wall=hanging bracket
(vertical)
e TY-WK42PV4W
Hook
Open
® In order to maintain the TV's performance and safety, be absolutely sure
to ask your dealer or a licensed contractor to secure the wall-hanging
brackets.
e Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.
® Handle the TV carefully during installation since subjecting it to impact or
other forces may cause its panel to crack.
Caution )
e Incorrectinstallationmay causebattery
Close
Note the correct polarity
(+or -).
leakageand corrosion,resultingindamage
to the remotecontrol.
® Do not mix oldand new batteries.
_ Do not mix different battery types (such
as alkaline and manganesebatteries).
_ Do notuserechargeable(Ni-Cd)batteries.
e Do not burn or break batteries.
e Make a note of the remote control
codes before changing batteries in
case the codes are reset. (p. 39)
6
reAssembling the pedestal
® Fix securely with assembly screws @. (Total 4 screws)
@Tighten screws firmly.
Pole iI_ ._
II
)Pole
Front
Accessories
Assembly screws
(4 of each)
M5x 18 (Silver)
M5x 35 (Black)
Poles (2)
[]Set-up
@Carry out work on a horizontal and level surface.
® Align the pedestal with its center of rotation, referring to
"Assembling the pedestal,"
® Tighten screws firmly.
Bottom view
Rear side
Hole for pedestal
installation
Pole
Pole
Base
® Fix securely with assembly screws _@.
(Total 4 screws)
@ @ or (R) is printed at the
bottom of the poles.
Base (1)
®
3>
O
O
(1)
00
o
-._.
09
0
©
>
o
©
©
(Warning)
Do not disassemble or modify the pedestal.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
(Caution)
Do not use any other TV and displays.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or damaged.
® If you use the pedestal when it is damaged, personal injury may result. Contact your nearest Panasonic Dealer
immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
7
Accessories/0ptioIAccessory
® Do not bundle the RF cable and AC cord
together (could cause distorted image).
##Fasten the cables with the Cable clamper as
necessary.
_ When using the options, follow the option's
assembly manual to fix cables.
To attach
Insert it firmly until the
tabs on both sides click
into place.
To attach _To remove
Cableclamper _ _ __ P
To bundle
hooks
To remove
Keep pushing both
side snaps
hole
_1_,0 / _d) Sna s
/
\ Id_ bothsidesuntil
_. theysnap
_KeTOloosen
_... knob the knob
ep pushing
Reference of connection
Antenna terminal Pin terminals HDM! terminal
red
blue green
Firmly tighten by hand.
Match colors of plugs and terminals.
Insert firmly.
Insert firmly.
8
ic C
[]
ect=
TV
VHF/UHF Antenna
VHF/UHF Antenna
........................................ (Connect after all the
VHF/UHF Antenna
_ NTSC (National Television System Committee):
Conventional broadcasting
_ ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.
AC 120 V
60 Hz
AC Cord
Back of the TV other connections have
been made.)
@®
o co
_'_
ag
} i, ,i i,i i
_NNNNN
o(Ifn 0 Cable BOx)
@
ANT IN ANT OUT Cable Box/Cable
,,_ ,_,_<......................................2 You need to subscribe to a cable TV service to enjoy viewing their
Cable Box The connection for high-definition can be done with the use of HDMI or
programming.
_ If using a Cable Box set the TV channel to CH3 or CH4 for regular cable.
_ You can enjoy high=definition programming by subscribing to a high-
definition cable Service.
Component Video cable. (p. 12)
N6-
_'_
® Not all cables and external equipment shown in this book are supplied with the TV.
¢ For the details of the external equipment's connections, please refer to the operating manuals for the equipment.
® When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
® For additional assistance, visit us at: www.panasonic.com
www.panasonic.ca
9
ect"
(Continued)
TV
AV Equipment
(e.g, DVD Recorder
or VCR)
VHF/UHF Antenna
VHF/UHF Antenna
Back of the TV
DVD Recorder
If this source has higher resolution through interlace
or progressive signal, connection can be done with
the use of Component Video or HDMI cable. (p. 12)
VCR
Connection can be done with the use of an RF
cable and Composite Video/S Video cable. (p. 12)
AC 120 V
60 Hz
AC Cord
(AC cord connection)
10
ANT IN ANT OUT
AV Equipment
(e.g. DVD Recorder or VCR)
(with TV tuner)
i Connecting TV and AV equipment
Please refer to _A_- _-D>on p. 12
J
TV
DVD Recorder Receiver_ VHF/UHFAntenna
Satellite
VCR
You can enjoy high-definition
programming by subscribing to
high-definition satellite service.
Connection can be done with the
use of HDMI or Component Video
cable. (p. 12)
AC 120 V
60 Hz
Back of the TV
_:_i _ii _,iiiYill_i_i_: iii !i!!Ti • • •
) '
@ @ @
A.Ti. A.Ti. A.TOUT
(AC cord connection)
AC Cord
®
O3
00
O
C)
©
(1)
o
o
-4-4
<<
4- 4-
EJEJ
<<
EJEJ
7O;;O
@(1)
o o
co
¢313_
(1)@
co
<<
©©
4-
03
(D
_1;/ _:_ I Connecting TV and AV equipment
I P ease refer to _A_= 12.
[ _D_on p.
Satellite Receiver DVD Recorder or VCR
(with TV tuner)
_ For details of external equipment connections, please refer to the operating manuals for the equipment.
11
(1)
33
(1)
o
(1)
<
(1)
ect"
(Continued)
@To use HDMI terminals
{_ Connecting to HDMI terminals will enable you to enjoy high-definition digital images and highquality
sound.
® For "VlERA LinkTM connections", please refer to p. 41.
@To use COMPONENT terminals
L
white AUDIO
R OUT
|
|
H
|
©To use S VIDEO terminals
|
H
|
H
I
g
|
|
H
B
red red
@To use COMPOSITE terminals
red
green
_/PB COMPONENT
' VIDEOOUT
blue
red
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
12
|
u
g
|
|
|
yellow
white
OUT
red red
e.g. DVD Recorder
or
e.g. VCR
_ The S Video input will override the composite video signal when S Video cable is connected. Connect
either S Video or Video cable.
¢ Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite
terminals.
_ Some programs contain a copyright protection signal to prevent recording.
_ When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
_ For the details of the external equipment's connections, please refer to the operating manuals of this equipment.
C
Front of the "IV Displays the Main menu. HDMI input 4 connector
Chooses menu and submenu entries.
Changes the input mode
L
POWER
button
_ The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
Switches TV On or Off (Standby)
Viewing from SD Card (p. 18-19)
The equipment (Remote control mode)
selection button (p. 20)
Changes the input mode (p. 20)
Displays Sub Menu (p. 16, 26)
Colored buttons
(used for various functions)
(for example p. 18, 30)
Channel up/down
Changes aspect ratio (p. 17)
C.A.T.S.sensor
Plasma C.A.T.S.(Contrast
Automatic Tracking System). (p. 24)
control sensor
Within about 23 feet (7 meters) in front
Power indicator
(on: red, off: no light)
of the TV set.
Swing up the door at "A".
up/down
VlERA Link menu (p. 30-31)
Selects Audio Mode for TV viewing
(p. 16)
Displays Main Menu (p. 24)
Exits from menu screen
Selects/OK/Change
Returns to previous menu
Volume up/down
Displays or removes the channel
banner (p. 16)
Video Input 2 connector
SD card slot
®®
uu_.
00.:::3
o _7
©
o_
©
m
©
o
©
©
Operates the Favorite channel list
function. (p. 17)
Switches to previously viewed channel
or input modes.
External equipment operations
(VCRs, DVDs, etc.) (p. 20)
Sound mute On/Off
Numeric keypad to select any
channel (p. 16) or press to enter
alphanumeric input in menus.
(p. 20, 32, 34, 39)
channel access for DTV and
DBS (p. 16)
Swiches to input terminal that has
"GAME" label.
13
F'rst Ti e Setu
"First time setup" is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when "Auto power on" (p. 26-27) is set to "No".
Turn the TV On with the POWER button
Pow_. POWER
or
* This setting will be skipped next time if you select "Home".
_1_Select your language
_) Be sure to select "Home"
® Please confirm your selection (Home) before pressing OK button.
[] If you select "Store" by mistake in @7,confirmation screen will be displayed.
m Press to exit from
a menu screen
EXiT
@
m Press to return
to the previous
screen
RETURN
@
(2N
_#}To change setting
(Language/Clock/
Auto program)later,
go to Menu screen
(p. 26)
® Select "No" and return to previous screen @.
_ If you select "Yes", Screen enters store demonstration mode. Displays "Please
select your viewing environment" screen once again as shown below.
Reselect "Home".
• Unplug the TV and plug it again.
• Press and hold down the front POWER button.
Adjust the clock
Year: Select the year
Month: Select the month
Day: Select the day
item
RETURN
-- Go back to previous screen.
Hour: Adjust the hour
Minute: Adjust the minute
14
Auto channel setup
Select "Auto program"
Select "ANT in"
Select "Auto"
IANT in l
Cable: Cable TV
Antenna: Antenna
®
-13
t..=_
II Press to exit from
a menu screen
EXiT
@
Select scanning mode (ALL channels/Analogonly/Digitalonly)
Start scanning the channels
@Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
Confirm registered channels
"'_--_'_'"\f Q}select "Apply"
® If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the "Manual program" menu will also exit automatically.
® If you perform scanning more than twice, previously saved channels are erased.
B
(1)
O9
(1)
c
-O
® About broadcasting systems
Analog (NTSC): Conventional broadcasting
Digital (ATSC): New programming that allows you to view more channels
featuring high-quality video and sound
15
[]
Watc
Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 9-12)
|
TV
Turn power on
POWER
or
(TV)
m Other Useful Functions (Operate after @)
m Select Audio Mode for watching TV
SAP
POWER
® If the mode is not TV, press v_ and select TV.
(p. 20)
To directly input the digital
channel number
_When tuning to a digital channel,
press the button to enter the
minor number in a compound
channel number.
example: CH15-1: _ _ _
®_Digital mode
Press SAP to select the next audio track (if available) when receiving a digital channel.
®/Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode, (Stereo/SAP/Mono)
m Press SUB MENU to show sub menu screen. (p. 26)
This menu consists of shortcuts to convenient functions,
SUB
MENU
m Displays or removes the channel banner.
INF0 Channel
Station SAP
identifier indication
Signal Picture
resolution mode
Clock
Sleep timer
remaining time
16
m Press FORMAT to cycle through the aspect modes. (p. 46)
FORMAT I 4 --I
• 480i, 480p: FULUJUSTI4:31ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
FAVORITE m FAVORITE
Channel numbers registered in Favorite are displayed on the favorite tune
screen, Select the desired broadcast station with the cursor or use number
buttons, (see below)
,_ Reselect "Cable" or "Antenna" in "ANT in" of "Program channel" to switch the signal reception between cable TV
and antenna. (p. 15, 35)
® The channel number and volume level remain the same even after the TV is turned off.
_J
mSet Favorite Feature
Display the SUB MENU.
SUB
MENU
2
3
• Press FAVORITE repeatedly to
change between pages (1/3, 2/3,
3/3, or exit).
Press A Tto highlight a position on
the list.
Then, press OK to save the
displayed channel in that position.
mUse Favorite Feature
I FAVORITE
select
3
) ,,} ok
/
Press FAVORITE.
• Press FAVORITE repeatedly to
Press A T or a Numbered key (1-9
and 0) to highlight a channel on the
list.
• Selecting a channel number from
Press OK to display the highlighted
channel.
change between pages (1/3, 2/3,
3/3, or exit).
the list with the number button will
display the channel directly.
£Q
®
o
:3-
B.
-4
<
• You can also use the NUMBER
buttons (1-9 and 0) to select a
list number (1-9 and 0). By doing
so, the displayed channel will be
saved on that list number without
pressing OK.
,_ To delete a favorite channel
A saved channel can be removed from the list by holding
down OK while its position is highlighted.
® To change the page
Pressing 4 changes the page backward.
Pressing t_ changes the page forward.
17
[]
[]
from SD Card
You can view photos taken with a digital camera or digital video camera and saved on an SD card.
(Media other than SD Cards may not be reproduced properly.)
insert the SD card and select "Play SD card now"
® "SD card setting" will be displayed automatically each time an SD card is inserted
for the first time.
Play813cardautomatically:Set itto playback the data when SD card is inserted.
Play SD card now
On: When SD card is inserted, the data plays
automatically from next time.
Off: The data can be played manually.
Press the SD key or select "SD card" on the Menu
® You can skip this step when "Play SD card now" is selected or "On" is set in "Play
SD card automatically" setting.
or
[] SD card
II Press to exit from
a menu screen
EXIT
@
II Press to return
to the previous
screen
RETURN
@
Select the data to be viewed
view
(i_seiect
_view
Navigation area
-- Selected picture information isdisplayed.
No.: Image number or file name is
displayed.
Date: Date of recording is displayed.
Pixel: Display resolution is displayed.
-- Total number of images
R G
I m
(to Slide show) (to Single photo display)
_ Depending on the JPEG format, "Information" contents may not be displayed
correctly. Refer to p. 47 (Data format for SD card browsing) for details.
View
To previous photo
® To display/hide Navigation area _
Present status
(While reading the data)
INFO
18
Displays one at a time
Navigation area
Loading...