Panasonic TH-50PE77U User Manual

High Definition Plasma Television

Televisor de plasma de alta definición

Quick Start Guide

(See page 6)

Guía de inicio rápido

(vea la página 6)

Operating Instructions

Manual de instrucciones

Model No.

Número de modelo

TH-42PE77U
TH-50PE77U

For assistance (U.S.A.), please call:

1-888-VIEW-PTV (843-9788)

or visit us at www.panasonic.com/contactinfo

For assistance (Puerto Rico), please call:

787-750-4300

or visit us at www.panasonic.com

For assistance (Canada), please call:

1-800-561-5505

or visit us at www.panasonic.ca

Para solicitar ayuda (EE.UU.), llame al:
1-888-VIEW-PTV (843-9788)
ó visítenos en www.panasonic.com/contactinfo

Para solicitar ayuda (Puerto Rico), llame al:
787-750-4300

ó visítenos en www.panasonic.com

English

Español

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

TQB2AA0756

Turn your own living room into a movie theater!

Experience an amazing level of multimedia excitement

2

SDHC Logo is a trademark.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

GalleryPlayer and the

GalleryPlayer Logo are

trademarks of GalleryPlayer, Inc.

EZ Sync™

EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd.

HDAVI Control™

HDAVI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd.

Enjoy rich multimedia

SD memory card

Camcorder

Contents

Please read before using the unit

Safety Precautions ·······································4

•

Notes ····························································5

•

Quick Start Guide

Accessories/Optional Accessory

•

To Prevent TV from Falling Over

•

Before Connection ······················ 10

•

Basic Connection ·························11

•

Identifying Controls ····················17

•

First Time Setup ··························18

··· 6

··· 8

•

Quick Start

Guide

Amplifier
Home theater
system

VCR DVD player

DVD recorder Set Top Box

Enjoy your TV!

Basic Features

Watching TV ···············································20

•

Viewing from SD Card ·······························22

•

Watching Videos and DVDs ·······················24

•

Advanced Features

How to Use Menu Functions

•

(picture, sound quality, etc.) ·······················26
EZ SyncTM “HDAVI ControlTM” ·····················30

•

Lock ···························································32

•

Editing and Setting Channels ····················34

•

Input Labels/Monitor Out/Closed Caption

•

Using Timer ················································38

•

Operating Peripheral Equipment ···············39

•

Recommended A V Connections ················40

•

Viewing Advanced FAQs, etc.

······36

Manufactured under license from Dolby Laboratories.

DOLBY and the double-D symbol are

trademarks of Dolby Laboratories.

FAQs, etc.

Remote Control Operation/Code List ·········42

•

Ratings List for Lock ··································46

•

Technical Information ·································47

•

Maintenance ··············································50

•

Specifications ·············································51

•

FAQ ····························································52

•

Limited Warranty (for U.S.A.) ·····················54

•

Customer Services Directory (for U. S. A.)

•

Limited Warranty (for Canada) ···················56

•

····55

3

Safety Precautions

The lightning flash with
arrowhead within a triangle

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning
storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.

The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.

4

FCC STATEMENT

This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the Panasonic Service Center or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by responsible party may cause harmful interference and could
void the user’s authority to operate this device.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source: Panasonic Consumer Electronics Company

1-888-VIEW-PTV (843-9788)

email: [e-mail]

CANADIAN NOTICE:

For Model TH-42PE77U, TH-50PE77U
This Class B digital apparatus complies with Canadian ICES-003.

WARNING/CAUTION

If problems occur during use

WARNING

SMALL PARTS CAN PRESENT CHOKING HAZARD IF
ACCIDENTALLY SWALLOWED.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS,
INCLUDING P ACKAGING MATERIALS AND PLASTIC BAGS/SHEETS
TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG
CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.

Set up

■

Do not place the Plasma TV on sloped or unstable surfaces.

The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.

This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories may
cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by
Matsushita Electric Industrial Co., Ltd.)

• Wall-hanging bracket (Vertical) TY-WK42PV3U

• Wall-hanging bracket (Angled) TY-WK42PR2U
TY-WK42PR3U

Always be sure to ask a qualified technician to carry out set-up.

Two or more people are required to install and remove the
television. If two people are not present, the television may
be dropped, and personal injury may result.

Transport only in upright position!

Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.

AC Power Supply Cord

■

The Plasma TV is designed to operate on 120 V AC, 60 Hz.
Securely insert the power cord plug as far as it will go.

If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.

Doing so may cause fire or electric shocks.

Do not handle the power cord plug with wet hands.

Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When
disconnecting the power cable, hold the plug, not the cable.

Do not make any modifications to, place heavy objects on,
place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable
which can cause fire or electric shock. If damage to the cable
is suspected, have it repaired at an Authorized Service Center.

■

If a problem occurs (such as no picture or no sound), or if
smoke or an abnormal odor is detected from the Plasma
TV, unplug the power cord immediately.

Continued use of the TV under these conditions might cause
fire or permanent damage to the unit. Have the TV evaluated
at an Authorized Service Center. Servicing of the TV by any
unauthorized personnel is strongly discouraged due to its
high voltage dangerous nature.

If water or foreign objects get inside the Plasma TV, if the
Plasma TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.

A short may occur, which could cause fire. Contact an
Authorized Service Center for any repairs that need to be
made.

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can
cause fire or damage to the Plasma TV.

If using the pedestal, leave a space of 3 15/16 ” (10 cm) or
more at the top, left and right, 1 49/64 ” (4.5 cm) or more at
the bottom, and 2 3/4 ” (7 cm) or more at the rear.

When using the Plasma TV

■

Be sure to disconnect all cables before moving the Plasma
TV.

Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any cleaning.

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from
becoming dusty.

Built-up dust on the power cord plug can increase humidity
which might damage the insulation and cause fire. Unplug the
cord from the wall outlet and clean it with a dry cloth.

This Plasma TV radiates infrared rays; therefore, it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step.
(Young children should be made particularly aware of this
caution.)

If the unit falls over or becomes damaged through misuse,
injury may result.

The TV will still consume some power as long as the power
cord is inserted into the wall outlet.

CAUTION

Notes

Do not display a still picture for a long time

■

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is
not covered by the warranty.

Typical still images

Channel number and other logos
Image displayed in 4:3 mode
SD Card photo Video game Computer image

4 : 3

Setup

■

Do not place the unit where it’s exposed to sunlight or other
bright light (including reflections).
Use of some types of fluorescent lighting may reduce the
remote control’s transmission range.

12

To prevent “Image retention”,
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations are
performed. (p. 53)

5

Accessories/Optional Accessory

Check you have all the items shown.

Accessories

Remote Control
Transmitter

N2QAYB000100

•

AC cord

Operating Instructions
Quick Setup Guide

(For viewing HD programming)

Remote Control
Transmitter

AA Battery

•

Pedestal

TBL2AX00141

•

(TH-42PE77U)

TBL2AX00151

•

(TH-50PE77U)

Antenna Adapter

F-Type for 5C-2V

(2)

Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)

•

How to assemble (p.7)

Cable clamper (2)Batteries for the

1

Open

Hook

Optional Accessory

Wall-hanging bracket

(vertical)

TY-WK42PV3U

•

Installing remote’s batteries

Note the correct polarity

2

(+ or -).

•

•

(angle)

TY-WK42PR2U

•

TY-WK42PR3U

•

•

Caution

Incorrect installation may cause battery

•

leakage and corrosion, resulting in
damage to the remote control.

Do not mix old and new batteries.

Close

In order to maintain the TV’s performance and
safety, be absolutely sure to ask your dealer or
a licensed contractor to secure the wall-hanging
brackets.
Carefully read the instructions accompanying the
plasma TV stand or pedestal, and be absolutely
sure to take steps to prevent the TV from tipping
over.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
its paneling to crack.

•

Do not mix different battery types (such as

•

alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or break batteries.

•

Make a note of the remote control codes

•

before changing batteries in case the
codes are reset. (p. 43-45)

Note

6

Attaching the pedestal to TV

Assembling the pedestal

■

Installing the poles Securing the poles

For 42˝,50˝ Plasma
television (Outside)

Base

Pole

Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.

Set-up

■

Carry out work on a horizontal and level surface.

•

B

Pole

Front

Use the assembly A screws to secure the poles firmly
to the bottom of the base.

Forcing the assembly screws the wrong way will strip
the threads.

Bottom view

Rear side

Hole for pedestal
installation

Note

Base

Quick Start

A

Accessories

Assembly screw
(4 of each)

A

M5 x 20

B

M5 x 30

Pole (2)

Guide

Accessories/Optional Accessory

Arrow mark

Pole

Base

Label

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

•

Caution

Do not use any television or displays other than those given in this Operating Instructions.

Otherwise the TV may fall over and become damaged, and personal injury may result.

•

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic

•

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to

•

support the TV, and it might fall over and become damaged, and personal injury may result.

Use the accessory fall-prevention brackets to secure the TV.

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal

•

injury may result.

•

Pole

Base (1)

Fix securely with assembly
screws B.
(Total 4 screws)

7

To Prevent TV from Falling Over

The TV must be fastened to both a base and a wall.

•

Securing to a base

Fix pedestal and base together with band.

•

Accessories

Band (2) Screw (2)

• Nominal diameter
4 mm x 12

Wood screw (2)

8

Securing to a wall

Fix to wall or post with strong commercial wire or chain.

•

Main screw

Accessories

Clamp (2)

Remove screw

Quick Start

Guide

To Prevent TV from Falling Over

Main screw

9

Reference of connection

Before Connection

Connected Equipment Introduction (Signal source)

Watching TV

■

VHF/UHF Antenna

•

NTSC (National Television System Committee):

•

Conventional broadcasting

ATSC (Advanced Television Systems Committee):

•

Digital TV Standards include digital high-definition television (HDTV),

standard-definition television (SDTV), data broadcasting, multi-channel
surround-sound audio and interactive television.

Cable Box/Cable

•

• You need to subscribe to a cable TV service to enjoy viewing their
programming.
You can enjoy high-definition programming by subscribing to a high-definition cable box. The connection can be

•

done with the use of HDMI or Component Video cable.

Recording/playing back with DVD recorder or VCR

■

DVD Recorder

•

This source has higher resolution through interlace or progressive signal.
Connection can be done with the use of Component Video or HDMI cable.
VCR

•

Connection can be done with the use of an RF cable and Composite Video/S Video cable.

VHF/UHF Antenna Cable Box/

DVD Recorder

or

Cable

or

VCR

Watching Satellite

■

You can enjoy high-definition programming by subscribing to

•

high-definition satellite source. Connection can be done with the use of
HDMI or Component Video cable.

Satellite Antenna

Enjoying Home theater and DVD recorder with

■

HDMI connection

Home theater and DVD Recorder

•

HDMI connection enables you to enjoy higher quality audio and video with

a single cable.

Note

If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic

•

DVD Recorder with this TV’s remote control (p. 25 EZ SyncTM).

All cables and external equipment shown in this book are not supplied with the TV.

•

For the details of the external equipment’s connections, please refer to the operating manuals of the equipment.

•

Antenna terminal

■

Pin terminals

■

HDMI terminal

■

Satellite

Receiver

DVD RecorderHome Theater

10

Firmly tighten by hand.

•

greenbluered

green

Match colors of plugs and terminals.

•

Insert firmly.

•

Insert firmly.

•

To connect antenna terminals

Basic Connection

Example 1

TV

Back of the TV

Connecting Antenna (To watch TV)

VHF/UHF Antenna

Cable TV

AC 120 V

60 Hz

ANTENNA

Cable In

AC Cord
(Connect after all the
other connections.)

Cable TV

VHF/UHF Antenna

or

Quick Start

Guide

Basic Connection (Antenna + TV)

Before Connection

VIDEO

PR PB Y

PR PB Y

AV IN 1 AV IN 2

S VIDEO

VIDEO

If using Cable Box

•

•

HDMI 1

RL

AUDIO IN

Set the TV channel to CH3 or CH4.

DIGITAL

AUDIO OUT

HDMI 2

AUDIO IN

Antenna

terminal

ANTENNA

Cable In

(If no Cable Box)

or

ANT OUT ANT IN

Cable Box

Note

When disconnecting the power cord, be absolutely sure to disconnect the power cord plug at the wall outlet first.

•

For additional assistance, visit us at: www.panasonic.com

•

www.panasonic.ca

11

To connect antenna terminals

Basic Connection (Continued)

Example 2

TV

Back of the TV

Connecting DVD recorder (VCR) (To record/playback)

DVD Recorder

or

VCR

VHF/UHF Antenna

AC 120 V

60 Hz

ANTENNA

Cable In

AC Cord

Antenna

terminal

VHF/UHF Antenna

AUDIO VIDEO

R

COMPONENT
VIDEO
INPUT

R

INPUT 1

R

INPUT 2

R

TO

PROG

AUDIO

OUT

AMP

R

AUDIO

L

L

L

L

L

PR PB Y

PR PB Y

S VIDEO

VIDEO

To use PROG OUT terminals
(p. 40, 41)

AV IN 1 AV IN 2

HDMI 1

RL

AUDIO IN

DIGITAL

AUDIO OUT

To use HDMI
terminals
(next page)

To use S VIDEO terminals
(next page)

HDMI 2

AUDIO IN

ANTENNA

Cable In

12

To use COMPOSITE terminals
(next page)

To use COMPONENT terminals
(next page)

ANT OUT ANT IN

DVD Recorder or VCR

(with TV tuner)

High-Definition

Standard-Definition

COMPONENT
VIDEO
INPUT

R

PR PB Y

P

R PB Y

R

L

L

TO

INPUT 2

S VIDEO

R

R

L

L

INPUT 1

PR PB Y

R

R

L

L

To use HDMI terminals

■

HDMI 2

AV IN 1 AV IN 2

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality

•

sound.

To use COMPONENT terminals

■

AUDIO IN

white
red

white

red

white

red

L

R

HDMI
AV OUT

DVD Recorder

AUDIO
OUT

Quick Start

Guide

Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

•

To use COMPOSITE terminals

■

To use S VIDEO terminals

■

green

blue

red

yellow

white

red

white

red

green

blue

red

yellow

white

red

white

red

green

blue

red

yellow

white

red

white

red

Y

P

B

COMPONENT
VIDEO OUT

PR

L

COMPOSITE
OUT

R

S VIDEO
OUT

L

AUDIO

R

OUT

DVD Recorder

DVD Recorder

or

VCR

DVD Recorder

or

VCR

Basic Connection

(TV + DVD Recorder or VCR)

The S Video input will override the composite

•

video signal when S Video cable is connected.
Connect either S Video or Video cable.

Note

Some programs contain a copyright protection signal to prevent recording.

•

When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video

•

signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the
other TV monitor.

Connecting to S VIDEO terminals will enable

•

you to enjoy greater picture quality than using
Composite terminals.

13

To connect antenna terminals

Connecting TV and DVD recorder (VCR)

Basic Connection (Continued)

Example 3

TV

Back of the TV

Connecting DVD recorder (VCR) and satellite receiver

DVD Recorder

or

VCR

Satellite

Receiver

AC 120 V

60 Hz

VHF/UHF Antenna

VHF/UHF Antenna

ANTENNA

Cable In

AC Cord

Antenna

terminal

AUDIO VIDEO

R

COMPONENT
VIDEO
INPUT

R

INPUT 1

R

INPUT 2

R

TO

PROG

AUDIO

OUT

AMP

R

AUDIO

L

L

L

L

L

PR PB Y

PR PB Y

S VIDEO

VIDEO

AUDIO IN

HDMI 1

To use S VIDEO terminals
(p. 13)

To use COMPOSITE terminals
(p. 13)

AV IN 1 AV IN 2

RL

DIGITAL

AUDIO OUT

To use HDMI
terminals
(p. 13)

HDMI 2

AUDIO IN

ANTENNA

Cable In

ANT OUT ANT IN

ANT IN

14

To use COMPONENT terminals
(p. 13)

Connect in the same way as on p. 13.

Satellite ReceiverDVD Recorder or VCR

(with TV tuner)

To connect DVD recorder

and satellite receiver

To connect VCR and

satellite receiver

To use HDMI terminals

■

HDMI
AV IN

DVD Recorder

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality

•

sound.

To use COMPONENT terminals

■

L

white

AUDIO
IN

DVD Recorder

COMPONENT
VIDEO IN

Satellite Receiver may also be connected to COMPOSITE or S VIDEO terminals. (see below)

•

PB

P

R

red

Y

green

blue

R

red

white

red

green

blue

red

white

red

green

blue

red

green

white

red

blue

red

L

R

Y

P

B

PR

HDMI
AV OUT

Satellite

Receiver

AUDIO
OUT

Satellite

Receiver

COMPONENT
VIDEO OUT

Quick Start

Guide

Basic Connection

(TV + DVD Recorder or VCR + Satellite receiver)

To use COMPOSITE terminals

■

VCR

To use S VIDEO terminals

■

VCR

The S Video input will override the composite

•

video signal when S Video cable is connected.
Connect either S Video or Video cable.

COMPOSITE
IN

S VIDEO
IN

AUDIO
IN

yellow

L

white

R

red

L

white

R

red

yellow

white

red

white

red

yellow

yellow

L

COMPOSITE

white

red

white

red

OUT

R

S VIDEO
OUT

L

AUDIO
OUT

R

white

red

white

red

Connecting to S VIDEO terminals will enable

•

you to enjoy greater picture quality than using
Composite terminals.

Satellite

Receiver

Satellite

Receiver

15

To connect HDMI terminals

RL

HDMI 1

AUDIO IN

VIDEO

S VIDEO

PRPBY

Basic Connection (Continued)

Example 4

TV

Back of the TV

Home theater

(HDMI AV OUT)

Connecting Home Theater and DVD recorder

Home Theater

DVD Recorder

HDMI 2

or

DIGITAL

AUDIO OUT

AUDIO IN

AV IN 1 AV IN 2

Home theater

(DIGITAL AUDIO IN)
(When listening to TV audio) [ATSC only]

HDMI
AV OUT

DIGITAL
AUDIO IN

HDMI
AV IN

Home Theater
(AV amp)

Note

It is recommended that you use Panasonic’s HDMI cable. (P. 30)

•

When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT

•

terminal, refer to p. 15 “To use COMPONENT terminals” or “To use S VIDEO
terminals”.
If you connect RAM theater or Player theater with HDMI cable, use audio cable

•

instead of the optical digital audio cable. (p. 41)

Cable Binding Instructions

Do not bundle the RF cable and AC cord together

•

(could cause distorted image).
Fix cables with Cable clamper as necessary.

•

When using the options, follow the option’s assembly

•

manual to fix cables.

To fix

ANTENNA

Cable In

AC cord

DVD Recorder

Push until
clicks

HDMI
AV OUT

To release

Press catch
in and pull
away

16

To attach

Insert

hole

To bundle

To remove To loosen

Snaps

Keep pushing
both side
snaps

hooks

Set

knob

Keep pushing
the knob

ANTENNA

Cable In

-

SUB

MENU

-

Identifying Controls

Front of the TV Back of the TV

Switches TV/VIDEO

Volume up/down

Power indicator
(on: red, off: no light)

Selects channels
in sequence

POWER button Remote control sensor

Note

The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.

•

Switches TV to On or Standby
Viewing from SD Card (p. 22-23)
The equipment selection button (p. 24)

Changes the input mode (p. 24)

Displays Sub Menu (p. 20, 28)
Colored buttons

(used for various functions)
(for example p. 22, 34)

Channel up/down

Changes aspect ratio (p. 21)

Within about 23 feet (7 meters) in
front of the TV set.

SUB

MENU

EZ Sync menu (p. 25, 30-31)
Selects Audio Mode for TV viewing

(p. 20)
Displays Main Menu (p. 26)
Exits menus
Selects/OK/Change
Returns to previous menu

Volume up/down
Displays or removes the channel

banner (p. 20)
Sound mute On/Off

Quick Start

Guide

Identifying Controls

Basic Connection (TV + Home Theater + DVD Recorder)

Operates the Favorite channel list
function. (p. 21)

Switches to previously viewed channel
and input modes.

Numeric keypad to select any
channel (p. 20) or press to enter
alphanumeric input in menus.
(p. 24, 25, 32, 34, 39)

Direct channel access for DTV and
DBS (p. 20)

External equipment operations
(VCRs, DVDs, etc.) (p. 24)

17

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 28-29) is set to “No”.

Turn the TV On with the POWER button

or

1

2

or

(TV) (Remote)

Select your language

First time setup

Language

Clock
Auto program
Picture

next

Press to exit from

■

menu screen

Press to return to

■

previous screen

Note

To change setting

•

(Language/Clock/Auto
program/Picture) later,
go to Menu screen
(p. 26, 28)

3

Language

Language

English Español Français

English

Go back to previous screen.

Adjust the clock

First time setup

Language

Clock

Auto program
Picture

Clock

Year

Month
Day
Hour
Minute

Year: Select the year
Month: Select the month
Day: Select the day
Hour: Adjust the hour
Minute: Adjust the minute

2007

1
7

10 AM

10

select

next

select

set
select item

18

Go back to previous screen.

4

Auto channel setup

Select “Auto program”

First time setup

Language
Clock

Auto program

Picture

next

select

Select “ANT in”

Program channel

ANT in

Auto

Cable

set

select

ANT in

Cable: Cable TV
Antenna: Antenna

Select “Auto”

Program channel

ANT in

Auto

Cable

next

select

Select scanning mode (ALL channels/Analog only/Digital only)

Auto program

All channels
Analog only

Digital only

ok

select

Quick Start

Guide

First Time Setup

Press to exit from

■

menu screen

Note

About broadcasting

•

systems

Analog (NTSC):

traditional TV
programming

Digital (ATSC):

new programming
that allows you to
view more channels
featuring high-quality
video and sound

Auto program

Scanning digital channel
progress

quit 40%

All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only

5

Confirm registered channels

rogram

Apply Cancel

aption Favorite Add

.
.
.

If OK is not pressed after selecting “Apply”, the channels will not be saved.

•

If you perform scanning more than twice, previously saved channels are erased.

•

First time setup

Language
Clock
Auto program

Picture

...

Yes

...

Yes

...

Yes

Start scanning the channels

Available channels (analog/digital)

•

are automatically set.

select

“Apply”

ok

(Refer to p. 26)

19