Panasonic TH-50LFC70W, TH-50LFC70U, TH-50LFC70E User Manual

TH-50LFC70U TH-65LFC70U TH-80LFC70U TH-50LFC70E TH-65LFC70E TH-80LFC70E

Operating Instructions Display Operations

FULL HD LCD Display (for business use)

Model No.

TH-50LFC70W TH-65LFC70W TH-80LFC70W

English

Please read these instructions before operating your set and retain them for future reference.

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://panasonic.net

Table of Contents

Before use

Illustrations and screens in this Operating Instructions are images for illustration purposes, and may • be different from the actual ones.

•

Descriptive illustrations in this Operating Instructions are created mainly based on the 50 inch model.

Important Safety Instructions .................................. 1

FCC STATEMENT ...................................................... 2

Important Safety Notice ........................................... 3

Safety Precautions ................................................... 4

Accessories .............................................................. 7

Accessories Supply ................................................. 7

Contents in the CD-ROM ........................................ 7

Remote Control Batteries ........................................ 8

Connections .............................................................. 9

AC cord connection and  xing, cable  xing ............. 9

Speaker connection ................................................11

Video equipment connection ..................................11

VIDEO and COMPONENT / RGB IN connection.... 13

HDMI connection ................................................... 13

DVI-D IN connection .............................................. 14

PC Input Terminals connection .............................. 15

SERIAL Terminals connection ............................... 16

PC OUT connection............................................... 17

Example connection using the DIGITAL LINK

Terminal ................................................................. 18

Power On / Off ......................................................... 19

Selecting the input signal ...................................... 21

Basic Controls ........................................................ 22

ASPECT Controls ................................................... 25

Digital Zoom ............................................................ 26

MULTI PIP ................................................................ 27

Memory Viewer Function ....................................... 28

Using Miracast(TM) ................................................ 33

On-Screen Menu Displays ..................................... 34

Adjusting Pos./Size ................................................ 35

Picture Adjustments ............................................... 38

Advanced settings ................................................. 39

Picture Pro les ....................................................... 40

Saving pro les ....................................................... 41

Loading pro les ..................................................... 42

Editing pro les ....................................................... 42

Sound Adjustment .................................................. 43

SDI Sound Output ................................................. 43

Setup menu ............................................................. 44

Day/Time Settings / On/Off Timer Settings .......... 45

Day/Time Settings ................................................. 45

On/Off Timer Settings ............................................ 45

MULTI PIP Settings ................................................. 46

Screensaver (For preventing image retention) .... 47

Setup of Screensaver Time ................................... 48

ECO Mode settings ................................................. 49

Customizing the Input labels ................................. 50

Function Button Settings ....................................... 51

Memory Viewer Settings ........................................ 52

Monitor Out ............................................................. 52

No activity power off .............................................. 53

Menu Display Duration / OSD Brightness ............ 53

OSD Language ........................................................ 53

Setup for Input Signals .......................................... 54

Component / RGB-in select ................................... 54

YUV / RGB-in select .............................................. 54

Signal menu .......................................................... 55

Options Adjustments ............................................. 58

Weekly Command Timer ....................................... 61

Audio input select .................................................. 63

Input Search .......................................................... 64

RS-232C/LAN Information Timing ......................... 65

Troubleshooting ..................................................... 66

When using Miracast ............................................. 68

List of Aspect Modes ............................................. 69

Applicable Input Signals ........................................ 71

Shipping condition ................................................. 72

Command list of Weekly Command Timer ........... 73

Speci cations ......................................................... 74

Software License .................................................... 77

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel.

The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons.

WARNING : To prevent damage which may result in  re or shock hazard, do not expose this apparatus to

rain or mois ture. Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

WARNING : 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing

to quali ed service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only  t a grounding-type power outlet. This is a safety fea ture. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the ap pli ance.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not  t into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments / accessories speci ed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Some recommended user provided interface cables may require usage of the attached ferrite core kit(s), refer to interface cable connection instructions for details. Any changes or modi cations not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-50LFC70U, TH-65LFC70U, TH-80LFC70U

Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, New Jersey 07102-5490 Contact Source: Panasonic System Communications Company of North America 1-877-655-2357

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Microsoft Microsoft Corporation in the United States and/or other countries.

• Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and other countries.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

• HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• RoomView, Crestron RoomView and Fusion RV are registered trademarks of Crestron Electronics, Inc, and Crestron Connected is the trademark of Crestron Electronics, Inc.

• Miracast is a trademark of Wi-Fi Alliance.

• Android is a registered trademark of Google Inc.

• iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

, Windows®, Windows Vista®, and Internet Explorer® are the registered trademarks or trademarks of

Important Safety Notice

IMPORTANT: THE MOULDED PLUG

WARNING

1) To prevent damage which may result in  re or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

No naked  ame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali ed service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only  t an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic  elds. Using this appliance near sources of strong electromagnetic  elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic  elds.

IMPORTANT INFORMATION

If a display is not positioned in a suf ciently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the display.

• Only using furniture that can safely support the display.

• Ensuring the display is not overhanging the edge of the supporting furniture.

• Not placing the display on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

• Not standing the displays on cloth or other materials placed between the display and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the display or its controls.

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is

 tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark If the plug contains a removable fuse cover, you must ensure that it is re tted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer.

Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this display. The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety. If the socket outlet in your home is not suitable, get it changed by a quali ed electrician. If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

IMPORTANT: THE MOULDED PLUG

or the BSI mark on the body of the fuse.

ASA

WARNING : — THIS DISPLAY MUST BE EARTHED.

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

Safety Precautions

WARNING

Setup

This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

• Pedestal .................................................................................... TY-ST42P50 (for 50 inch model)*,

TY-ST65P20 (for 65 inch model and 80 inch model)

• Mobile stand for Display ............................................................ TY-ST50PB2 (for 50 inch model),

TY-ST65PB2 (for 65 inch model), TY-ST80LF70 (for 80 inch model)

• Mobile stand ..............................................................................TY-ST58PF20 (for 50 inch model)

• Wall-hanging bracket (vertical) .................................................. TY-WK42PV20 (for 50 inch model),

TY-WK70PV50 (for 80 inch model)

• Wall-hanging bracket (angled) .................................................. TY-WK42PR20 (for 50 inch model),

TY-WK65PR20 (for 65 inch model)

• Ceiling-hanging bracket ............................................................ TY-CE42PS20 (for 50 inch model)

• BNC Dual Video Terminal Board ............................................... TY-FB9BD

• HD-SDI Terminal Board ............................................................. TY-FB9HD

• HD-SDI Terminal Board with audio ........................................... TY-FB10HD

• Dual Link HD-SDI Terminal Board ............................................. TY-FB11DHD

• Dual HDMI Terminal Board ....................................................... TY-FB10HMD

• DVI-D Terminal Board ............................................................... TY-FB11DD

• Digital Interface Box .................................................................. ET-YFB100G

*Precaution for use of TY-ST42P50 (for 50 inch model)

Use a stand pole “for plasma display (long)” (part number: TBLA3679, TBLA3680).

We are not responsible for any product damage, etc. caused by use of the pedestal, wall-hanging bracket or ceiling-hanging bracket made by other companies, or by failures in the installation environment for the pedestal, wall-hanging bracket or ceiling-hanging bracket even during the warranty period. Always be sure to ask a quali ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in  re

or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

•

Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For suf cient ventilation; If using the pedestal (optional accessory), leave a space of 3

3/4

and 2 surface. If using some other setting-up method, follow the manual of it. (If there is no speci c indication of installation dimension in the installation manual, leave a space of 3 and 2

Cautions for Wall or ceiling Installation

Do not install the product to a place where the product is exposed to direct sunlight.

” (7 cm) or more at the rear, and also keep the space between the bottom of the display and the  oor

15/16

3/4

” (7 cm) or more at the rear.)

• Wall or ceiling installation should be performed by an installation professional. Installing the Display incorrectly may

lead to an accident that results in death or serious injury. Use the speci ed accessories.

•

If you terminate the use of the Display on the wall or ceiling, ask a professional to remove the Display as soon as possible.

• When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal

objects inside the wall. An electric shock may occur if they contact metal objects inside the wall.

• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.

15/16

” (10 cm) or more at the top, left and right,

” (10 cm) or more at the top, bottom, left and right,

Safety Precautions

When using the LCD Display

The Display is designed to operate on 110 - 127 or 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Display to overheat, which can cause  re or damage to the Display.

Do not stick any foreign objects into the Display.

• Do not insert any metal or  ammable objects into the ventilations holes or drop them onto the Display, as doing so can cause  re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause  re or electric shocks.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause  re. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modi cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause  re and electric shock. If the power cable is

damaged, have it repaired at your local Panasonic dealer.

Do not remove covers and NEVER modify the Display yourself

• Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.)

• Have the Display checked, adjusted, or repaired at your local Panasonic dealer.

If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

To prevent the spread of  re, keep candles or other open  ames away from this product at all times.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Display in this condition,  re or electric shock could result. After checking that the smoke

has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

• A short circuit may occur, which could cause  re. Contact your local Panasonic dealer for any repairs that need to

be made.

Safety Precautions

CAUTION

When using the LCD Display

Do not bring your hands, face or objects close to the ventilation holes of the Display.

• Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Display.

• If the Display is moved while some of the cables are still connected, the cables may become damaged, and  re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in  re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

Do not burn or breakup batteries.

• Batteries must not be exposed to excessive heat such as sunshine,  re or the like.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with  ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Usage of a chemical cloth

• Do not use a chemical cloth for the panel surface.

• Follow the instructions for the chemical cloth to use it for the cabinet.

Accessories

Accessories Supply

Check that you have the accessories and items shown

Operating Instruction book

Ferrite core × 2 J0KG00000014

Power supply cord TH-50LFC70U, TH-65LFC70U,

TH-80LFC70U

Software CD-ROM × 1

Use the Ferrite cores to comply with the EMC standard. (see page 14)

Remote Control Transmitter N2QAYB000691

Cable tie × 2 TMM17499

TH-50LFC70E, TH-65LFC70E, TH-80LFC70E

Batteries for the Remote Control Transmitter (R6 (UM3) Size × 2)

TH-50LFC70W, TH-65LFC70W, TH-80LFC70W

Clamper × 1 TMME289

Attention

Store small parts in an appropriate manner, and keep them away from young children.

Contents in the CD-ROM

The contents below are included in the supplied CD-ROM.

Instruction (PDF)

Software

Operating Instructions - Display Operations Operating Instructions - Network Operations Operating Instructions - Wireless Manager ME Software license GNU GENERAL PUBLIC LICENSE

GNU LESSER GENERAL PUBLIC LICENSE

Wireless Manager ME (Windows/Mac) Allows the image on the computer screen to be

sent wirelessly or via wired LAN. Switch the input to Panasonic APPLICATION before use. For more details, see the instruction manual of Wireless Manager ME.

Accessories

Remote Control Batteries

Requires two R6 batteries.

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity (+ and -).

“R6 (UM3)” size

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.

6. Do not burn or breakup batteries.

7. Batteries must not be exposed to excessive heat such as sunshine,  re or the like.

3. Replace the cover.

Connections

AC cord connection and  xing, cable  xing

For 50 inch and 65 inch models

AC cord  xing

Unplug the AC cord

Unplug the AC cord pressing the

Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on both the left and right sides.

When using the Wall-hanging bracket (vertical) (for 50 inch model) Note:

When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes clamper is used on the hole , the cables may be caught by the wall-hanging bracket.

two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst.

and to secure the cables. If the

50 inch model

Using the clamper

Secure any excess cables with clamper as required.

Note:

One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately. If you need more clampers, purchase them from your dealer. (Available from the customer service)

Attach the clamper

hole

To remove from the unit:

snaps

65 inch model

Bundle the cables

To loosen:

Insert the clamper in a hole.

Keep pushing both side snaps

hooks

Set the tip in the hooks

knob

Keep pushing the knob

Connections

For 80 inch model

AC cord  xing

Unplug the AC cord

Unplug the AC cord pressing the

Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on both the left and right sides.

Using the clamper

Secure any excess cables with clamper as required.

Note:

One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately. If you need more clampers, purchase them from your dealer. (Available from the customer service)

two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst.

Attach the clamper

Insert the clamper in a hole.

hole

To remove from the unit:

snaps

Keep pushing both side snaps

Bundle the cables

hooks

Set the tip in the hooks

To loosen:

knob

Keep pushing the knob

Speaker connection

Connections

Please use 8 /10 W speaker.

Video equipment connection

For 50 inch and 65 inch models

SLOT: Terminal board (optional accessories) insert slot (see page 4)

Note:

The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot.

AV IN (VIDEO): Composite Video Input

Terminal (see page 13)

COMPONENT/RGB IN: Component/RGB

Video Input Terminal (see page 13)

PC OUT:

Monitor Out Terminal. Video signals being reproduced on the display are output to another sub monitor as PC video signals. (see page 17)

Red

Black

While pressing the lever, insert the core wire.

SERIAL:

Serial Control Terminal. Control the Display by connecting to PC. (see page 16)

Black

Return the lever.

AUDIO 2 IN: Audio input terminal shared with DVI-D IN and PC IN. (see page 14, 15)

Red

AUDIO 1 IN:

Audio input terminal shared with VIDEO and COMPONENT/ RGB IN. (see page 13)

PC IN: PC Input Terminal

Connect to video terminal of PC or equipment with Y, PB(CB) and PR(CR) output (see page 15).

DVI-D IN: DVI-D Input Terminal (see page 14)

DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions - “Network Operations”.

AV IN (HDMI 1, HDMI 2): HDMI Input Terminal (see page 13) Connect to video equipment such as VCR or DVD player.

LAN, DIGITAL LINK*

Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends video and audio signals via the DIGITAL LINK terminal. (see page 18)

Connections

For 80 inch model

SLOT: Terminal board (optional accessories) insert slot

Note:

The upper side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the upper side slot.

AV IN (VIDEO): Composite Video Input Terminal

(see page 13)

COMPONENT/RGB IN: Component/RGB Video Input

Terminal (see page 13)

AUDIO 1 IN:

Audio input terminal shared with VIDEO and COMPONENT/ RGB IN. (see page 13)

AV IN (HDMI 1, HDMI 2): HDMI Input Terminal (see page 13) Connect to video equipment such as VCR or DVD player.

(see page 4)

SERIAL:

Serial Control Terminal. Control the Display by connecting to PC. (see page 16)

PC OUT:

Monitor Out Terminal. Video signals being reproduced on the display are output to another sub monitor as PC video signals. (see page 17)

AUDIO 2 IN: Audio input terminal shared with DVI-D IN and PC IN. (see page 14, 15)

PC IN:

DVI-D IN: DVI-D Input Terminal (see page 14)

DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions - “Network Operations”.

PC Input Terminal Connect to video terminal of PC or equipment with Y, P

output (see page 15).

B(CB

) and PR(CR)

LAN, DIGITAL LINK*

Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends video and audio signals via the DIGITAL LINK terminal. (see page 18)

Connections

VIDEO and COMPONENT / RGB IN connection

Note:

Additional equipment, cables and adapter plugs shown are not supplied with this set.

Stereo mini plug (M3)

Pin-BNC Adapter plug

AUDIO 1 IN: Shared with VIDEO and COMPONENT/RGB IN

Notes:

• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component” (when Component signal connection) or “RGB” (when RGB signal connection). (see page 54)

• Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y.

AUDIO

OUT

VIDEO

OUT

VCR

Pin-BNC Adapter plug

HDMI connection

[Pin assignments and signal names]

Pin No.

Signal name

T.M.D.S Data2+ T.M.D.S Data2

Shield

T.M.D.S Data2-

T.M.D.S Data1+ T.M.D.S Data1

Shield

T.M.D.S Data1-

T.M.D.S Data0+ T.M.D.S Data0

Shield

T.M.D.S Data0-

T.M.D.S Clock+

Pin No.

15 16

18 19

T.M.D.S Clock Shield

T.M.D.S ClockCEC Reserved

(N.C. on device) SCL

SDA DDC/CEC

Ground +5V Power Hot Plug Detect

Signal name

DVD Player

OUT

AUDIO

OUT

, Y , P B , P R

3 1

Computer

RGB Camcorder

HDMI cable

HDMI

AV OUT

HDMI

AV OUT

Note:

Additional equipment and HDMI cable shown are not supplied with this set.

DVD player

Connections

DVI-D IN connection

PC with DVI-D video out

Stereo mini plug (M3)

Shared with PC IN.

Less than

1.97 inch (5 cm)

Installing the Ferrite core

Pull back the tabs (in two places)

DVI-D Input Connector Pin Layouts

Connection port view

Ferrite core (supplied)

DVI-video cable (Within 5 m)

Open the Ferrite core

Pin No.

1 2 3 4 5

6 7 8

9 10 11 12 24

Less than

1.97 inch (5 cm)

Signal Name

T.M.D.S. data 2T.M.D.S. data 2+ T.M.D.S. data 2 shield

DDC clock DDC data

T.M.D.S. data 1T.M.D.S. data 1+ T.M.D.S. data 1 shield

Route the cable through and close

Pin No.

13 14 15 16 17 18 19 20 21 22 23

Fix the Ferrite core with the cable tie

Signal Name

+5 V DC Ground Hot plug detect T.M.D.S. data 0T.M.D.S. data 0+ T.M.D.S. data 0 shield

T.M.D.S. clock shield T.M.D.S. clock+ T.M.D.S. clock-

Notes:

• Additional equipment and cables shown are not supplied with this set.

• Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or the quality of the cable.

PC Input Terminals connection

Shared with DVI-D IN.

COMPUTER

Connections

Conversion adapter (if necessary)

RGB

PC cable

Audio

Connect a cable which matches the audio output terminal on the computer.

(Female)

Mini D-sub 15p

(Male)

Stereo mini plug (M3)

Notes:

• With regard to the typical PC input signals that are described in the applicable input signals list (see page 71), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight PC input signal types that are not included in the list.

• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080 dots when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show  ne detail with suf cient clarity.

• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci ed frequency range.

• Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component”

(when Component signal connection) or “RGB” (when RGB signal connection). (see page 54)

Signal Names for Mini D-sub 15P Connector

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

3 9 4 5

15 14 13 12 11

6 7 8

R (PR/CR)

G (Y)

B (PB/CB)

NC (not connected)

GND (Ground)

Pin Layout for PC Input Terminal

GND (Ground) GND (Ground) GND (Ground)

+5 V DC

GND (Ground)

NC (not connected)

HD/SYNC

SDA

SCL

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Settings” menu to

“RS-232C”. (refer to “Operating Instructions, Network Operations”)

(Male)

COMPUTER

RS-232C Straight cable

Notes:

•

Use the RS-232C straight cable to connect the computer to the Display.

D-sub 9p

(Female)

• The computer shown is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

The SERIAL terminal conforms to the RS-232C interface speci cation, so that the Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending and receiving of control data which satis es the conditions given below. Use a computer application such as programming language software. Refer to the documentation for the computer application for details.

Communication parameters

Signal level RS-232C compliant

Synchronization method Asynchronous

Baud rate 9600 bps

Parity None

Character length 8 bits

Stop bit 1 bit

Flow control None

Basic format for control data

The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent.

STX C1 C2 C3 P1 P2 P3 P4: P5 ETX

Start (02h)

Colon Parameter(s) 3-character command (3 bytes)

(1 - 5 bytes)

End (03h)

Notes:

• If multiple commands are transmitted, be sure to wait for the response for the  rst command to come from this unit before sending the next command.

• If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer.

• S1A and S1B of Command IMS are available only when a dual input terminal board is attached.

• Consult your local Panasonic dealer for detail instructions on command usage.

6789

13452

Pin layout for SERIAL Terminal

Signal names for D-sub 9P connector

Pin No. Details

2 3 5

• 7 8

•

R X D T X D

GND

Non use

(Shorted in this set)

These signal names are those of computer speci cations.

Command

Command Parameter Control details PON None Power ON POF None Power OFF AVL ** Volume 00 - 63

AMT

IMS None

0 Audio MUTE OFF 1 Audio MUTE ON

Input select (toggle) SL1 S1A S1B VD1 YP1

HM1 HM2 DV1 PC1 DL1 MG1 MV1

SLOT input (SLOT INPUT)

SLOT input (SLOT INPUT A)

SLOT input (SLOT INPUT B)

VIDEO input (VIDEO)

COMPONENT/RGB IN input

(COMPONENT)

HDMI 1 input (HDMI1)

HDMI 2 input (HDMI2)

DVI-D IN input (DVI)

PC IN input (PC)

DIGITAL LINK input (DIGITAL LINK)

Miracast input (Miracast(TM))

Memory veiwer input

(MEMORY VIEWER)

With the power off, this display responds to PON command only.

Connections

PC OUT connection

The image being reproduced on the display including the image input from video equipment can be displayed on another sub monitor.

To use the function, set “Monitor Out” to “On” in “Setup”. (see page 52) Note: Setting it to “On” will adjust the “Picture” menu values to the standard values.

Sub monitor

Computer, DVD player and other video equipment

PC input terminal

USB memory

(Female)

(To be viewed in Memory Viewer)

(Male)

Mini D-sub 15p cable (Commercially available)

Input signals that can be output

Input signal Output signal

HDMI input signal (HDMI 1, HDMI 2) HDCP (copy protection) not supported

DVI input signal (DVI-D IN) HDCP (copy protection) not supported

PC input signal (PC IN) When “Component/RGB-in select” is set to “RGB”

1,920 x 1,080@50 Hz or 1,920 x 1,080@60 Hz

Memory Viewer screen (MEMORY VIEWER) 1,920 x 1,080@60 Hz

Notes:

• The aspect ratio of the output signal is changed so that it can be shown on the screen.

• The following input signals cannot be output. Component input (COMPONENT/RGB IN) Composite video input (VIDEO) Miracast image (Miracast(TM)) Wireless Manager (Panasonic APPLICATION)

Pin Layout and Signal Names of Monitor Out Terminal (Mini-D-sub 15P)

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

4 5

15 14 13 12 11

6 7 8

NC (not connected)

GND (Ground)

R G B

GND (Ground) GND (Ground) GND (Ground)

+5 V DC

GND (Ground)

NC (not connected)

HD VD

Connections

Example connection using the DIGITAL LINK Terminal

A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal.

Display Connection Terminals

Control

Computer

When a Panasonic ET-YFB100G is used

Video Cassette Recorder

Computer

Note:

When connecting with DIGITAL LINK, be sure to con gure each of the “Network Settings” settings. For the cautions for DIGITAL LINK setting and connection, refer to “Operating Instructions - Network Operations”.

DVD Player

Power On / Off

Connecting the AC cord plug to the Display.

Connecting the plug to the Wall Outlet

Notes:

• Main plug types vary between countries. The power plug shown at right may, therefore, not be the type  tted to your set.

• When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst.

Press the Power switch on the Display to turn the set on: Power-On.

Power switch

Power Indicator: Green

[Starting up the network]

It takes some time for the network to start up just after the power is turned on. During that time, “Network Setup” in the “Setup” menu is grayed out and cannot be set.

Press the button on the remote control to turn the Display off.

Power Indicator: Red (standby)

Press the

Power Indicator: Green

Turn the power to the Display off by pressing the switch on the unit, when the Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns orange in the power off state.

button on the remote control to turn the Display on.

Power Indicator

Remote Control Sensor

Power On / Off

When  rst switching on the unit

Following screen will be displayed when the unit is turned on for the  rst time. Select the items with the remote control. Unit buttons are invalid.

OSD Language

English (UK)

Deutsch Français

Italiano

Español

ENGLISH (US)



Select the

language.

Set.

Day/Time Settings

Time MON 99:99

Set

Day MON Time

Day/Time Settings

Time TUE 99:99

Set

Day

18:00

TUE

18:00Time

Select “Day” or “Time”.

Setup “Day” or “Time”.

Select “Set”.

Set.

Notes:

• Once the items are set, the screens won't be displayed when switching on the unit next time.

• After the setting, the items can be changed in the following menus. OSD Language (see page 53)

Day/Time Settings (see page 45)

Power ON message

The following message may be displayed when turning the unit power ON:

No activity power off Precautions

’No activity power off’ is enabled.

If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time the power is turned ON. (see page 53)

Power Management Information

Last turn off due to 'Power management'.

If “Power management” is functioned, an information message is displayed every time the power is turned ON. (see page 49)

These message displays can be set with the following menu: Options menu

Power On Message (No activity power off) (see page 61) Power On Message (Power Management) (see page 61)

Displaying network information

The network information for the Display will be displayed in the following scenarios.

The power is turned ON with Panasonic APPLICATION selected as the input. The input is switched to Panasonic APPLICATION.

button is pushed with Panasonic APPLICATION selected as the input.

The

Display example:

Panasonic APPLICATION

S-DIRECT Name1234 Proj1234

Display ID

Display name

Wireless LAN network number

Selecting the input signal

Press to select the input signal to be played back from the equipment which has been connected to the Display.

Alternatively you can press , press to select the input and press .

INPUT

HDMI1

HDMI2

SLOT INPUT

VIDEO

COMPONENT

DVI

DIGITAL LINK

Miracast(TM)

Panasonic APPLICATION

MEMORY VIEWER

HDMI input in HDMI 1 terminal HDMI input in HDMI 2 terminal Input signal in a Terminal Board*

Composite video input in VIDEO terminal Component/RGB input in COMPONENT/RGB IN terminal* Computer's signal input in PC IN terminal DVI-D input in DVI-D IN terminal DIGITAL LINK input in DIGITAL LINK terminal Select this input when using the Miracast function. (

Select this input when using “Wireless Manager” via wired/wireless LAN.

see

page 33)

Select this input when using the Memory Viewer function. (

see

page 30)

*1 “SLOT INPUT” appears when an optional Terminal Board is connected.

When a Terminal Board with dual input terminals is connected, “SLOT INPUT A” and “SLOT INPUT B” will appear. When a Terminal Board incompatible with the Display is installed, “Non-Compatible Function Board” is displayed.

*2 “COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”.

(see page 54)

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Outputs the sound as set in “Audio input select” in the Options menu. (see page 63)

• Select to match the signals from the source connected to the component/RGB input terminals. (see page 54)

• Image retention (image lag) may occur on the LCD display panel when a still picture is kept on the panel for an extended period. To prevent such a problem, using the screensaver is recommended. (see page 47)

• The connection of the Wireless Manager is interrupted if the input is switched from Panasonic APPLICATION to Miracast(TM) or MEMORY VIEWER.

The connection of Miracast is interrupted if the input is switched from Miracast(TM) to Panasonic APPLICATION or MEMORY VIEWER. Please check the setting again after switching the input.

ENTER/

VOL

INPUT

Basic Controls

Main Unit For 50 inch and 65 inch models

Remote control sensor

Power Indicator

The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit will still

consume some power as long as the power cord is still inserted into the wall outlet.)

• Standby ........Red

Orange (When “Slot power” is set to “On” and Terminal Board is installed. See page 60) Orange (Depending on the type of the function board installed, when the power is supplied to the slot) Orange (When “Control I/F Select” is set to “DIGITAL LINK/LAN” or “Wireless Network Standby” is set to “On”. Refer to “Operating Instructions, Network Operations”)

• Power-ON ......Green

• HDMI1 Power management

HDMI2 Power management

.........................

These functions are not supported by TH-50LFC70E and TH-65LFC70E.

Orange (With HDMI1 or HDMI2 input signal. See page 49)

• PC Power management (DPMS)

......................... Orange (With PC input signal. See page 49)

• DVI-D Power management

......................... Orange (With DVI input signal. See page 49)

Note:

If the power indicator is orange, power consumption during standby is generally larger than that of when the power indicator is red.

Brightness Sensor

Detects the brightness in the viewing environment. (see page 49)

USB (VIEWER):

Connect to USB memory. (see page 29)

ENTER/

VOL

INPUT

SLOT: Terminal board (optional accessories) insert

slot (see page 4 )

Note:

The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot.

Enter / Aspect button

(see page 25, 34)

Volume Adjustment

Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 34)

MENU Screen ON / OFF

Each time the MENU button is pressed, the menu screen will switch. (see page 34)

INPUT button (INPUT signal selection)

(see page 21)

Main Power On / Off Switch

+ 56 hidden pages