Panasonic TH-50EQ1W User Manual
Operating Instructions
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
EU
Functional Manual
UHD LCD Display For business use
Model No. TH-86EQ1W
TH-75EQ1W
TH-65EQ1U TH-65EQ1W
TH-55EQ1U TH-55EQ1W
TH-50EQ1U TH-50EQ1W
TH-43EQ1U TH-43EQ1W
This manual is common to all the models regardless of suffixes of the
*
model number.
English
Please read these instructions before operating your set
and retain them for future reference.
*Actual resolution: 3840 × 2160p
DPQP1242ZA/X1
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that
you will have many years of enjoyment from your new LCD
Display.
To obtain maximum benefit from your set, please read these
Instructions before making any adjustments, and retain them
for future reference.
Retain your purchase receipt also, and note down the model
number and serial number of your set in the space provided
on the rear cover of these instructions.
Visit our Panasonic Web Site
https://panasonic.net/cns/prodisplays/
English
2
Table of Contents
Before use
●
Illustrations and screens in this Operating Instructions
are images for illustration purposes, and may be
different from the actual ones.
●
Descriptive illustrations in this Operating Instructions
are created mainly based on the 55-inch model.
Important Safety Instructions ..........................4
FCC STATEMENT .............................................. 5
Important Safety Notice ................................... 6
Safety Precautions ........................................... 8
Precautions for use ........................................ 11
Accessories ....................................................13
Accessories Supply ·········································· 13
Remote Control Batteries ·································· 14
Attaching the USB Memory Cover ······················· 15
Cautions when moving ................................. 15
Eyebolt ............................................................16
Connections .................................................... 17
AC cord connection and fixing / Cable fixing ·········· 17
Video equipment connection ······························ 19
Before connecting ············································ 20
HDMI 1 and HDMI 2 terminals connection ············· 20
DVI-D IN terminal connection ····························· 21
PC IN terminal connection ································· 22
AV IN terminal connection ··································23
SERIAL IN terminal connection ··························· 24
IR IN / IR OUT terminal connection ······················ 25
AUDIO OUT terminal connection ························· 26
USB terminal connection ··································· 26
Identifying Controls ........................................28
Display ·························································· 28
Remote Control Transmitter ······························· 30
Basic Controls ................................................ 31
Selecting the input signal ··································· 33
RECALL·························································33
Volume Adjustment ··········································34
Sound mute On / Off ········································· 34
OFF TIMER ···················································· 34
ASPECT Controls ........................................... 35
Digital ZOOM ................................................... 36
On-Screen Menu Displays ............................. 37
Adjusting Position .......................................... 39
Auto setup ······················································ 39
Sound Adjustment .......................................... 41
Picture Adjustments ....................................... 42
Picture Profiles ............................................... 45
Saving profiles ················································ 46
Loading profiles ··············································· 46
Editing profiles ················································ 47
Setup menu ..................................................... 48
Signal ···························································· 48
Power on settings ············································ 51
Input search ···················································· 52
Failover/Failback ············································· 53
Screensaver (For preventing image retention)········ 56
Input label ······················································ 57
Power management settings ······························ 57
Audio input select ············································ 59
HDMI-CEC settings ·········································· 59
Image settings ················································· 60
Input lock ······················································· 61
Off-timer function ············································· 62
No activity power off ········································· 62
OSD language ················································ 62
Multi display settings ········································ 62
Set up timer ···················································· 63
Date and time ················································· 64
Network settings ·············································· 66
USB media player settings ································· 68
Memory viewer settings ····································· 69
Function button settings ···································· 70
OSD settings ·················································· 71
Display orientation ··········································· 72
Image rotation ················································· 72
Options ·························································· 72
Control settings ··············································· 73
Information timing ············································ 73
Maximum VOL function ····································· 74
Maximum VOL level ·········································74
Button lock ····················································· 74
POWER button lock ········································· 74
Controller user level ········································· 75
PC input mode ················································ 75
Using Network Function ................................ 76
Necessary environment for computers to be connected
Example of network connection ·························· 76
Command control ············································ 77
Control Command via LAN ································ 77
PJLink protocol ················································ 81
Multi Monitoring & Control Software ····················· 82
Video Wall Manager ·········································82
·· 76
Content Management Software ··························· 82
Connecting with LAN ..................................... 83
Computer operation ·········································· 83
Using Web Browser Control .......................... 83
Before Using Web Browser Control ····················· 83
Access from Web Browser ································· 84
Operating with Web Browser ······························ 85
Using “USB media player” ............................93
Function description ········································· 93
Preparation ····················································· 94
Playing back the files ········································ 96
Network environment (Multi Media Player only) ······ 99
Starting / ending Media Player ···························· 99
Resume Play function ····································· 100
Playlist edit function ········································ 100
Schedule playback function using “Content
Management Software” ··································· 101
Using “Memory viewer” ............................... 105
Preparation ··················································· 105
Displaying the “Memory viewer” screen ·············· 106
Playing the pictures ········································ 107
Playing the video / music ································· 108
Using HDMI-CEC function ...........................109
Connection ··················································· 109
Setting ························································· 109
Interlocking devices ········································ 109
Operating a device (using the remote control of this unit)
····110
Using data cloning ....................................... 111
Copying the display data to the USB memory ·······111
Copying (cloning) the USB memory data to the display
Copying data to other display via LAN ·················113
Changing the cloning password ·························114
····112
USB memory network settings ................... 115
Saving the LAN setting file to the USB memory device
Copying the USB memory data to the display ·······115
···115
ID Remote Control Function ........................ 116
Setting the remote control’s ID number ················116
Cancelling the setting of remote control’s ID number
(ID “0”) ··························································116
Entering characters ...................................... 117
Preset Signals ............................................... 118
Shipping condition ....................................... 121
Initialization ................................................... 121
Troubleshooting ...........................................122
Specifications ............................................... 125
Software License .......................................... 128
English
3
65-inch model
86-inch model
75-inch model
55-inch model
50-inch model
43-inch model
86-inch model
75-inch model
65-inch model
Important Safety
86-inch model
75-inch model
65-inch model
Instructions
WARNING: To reduce the risk of electric shock,
do not remove cover or back.
No user-serviceable parts inside. Refer servicing
to qualified service personnel.
WARNING
WARNING: To reduce the risk of electric shock,
do not remove cover or back.
No user-serviceable parts inside. Refer servicing
to qualified service personnel.
The lightning flash with arrow-head within a
triangle is intended to tell the user that parts
inside the product are a risk of electric shock
to persons.
The exclamation point within a triangle
is intended to tell the user that important
operating and servicing instructions are in the
papers with the appliance.
WARNING :
To prevent damage which may result in fire or
shock hazard, do not expose this apparatus to
rain or moisture.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the set.
(including on shelves above, etc.)
WARNING :
1) To prevent electric shock, do not remove cover. No
user serviceable parts inside. Refer servicing to
qualified service personnel.
2)
Do not remove the grounding pin on the power
plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit
a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the
outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The
wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments / accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15)
To prevent electric shock, ensure the grounding pin
on the AC cord power plug is securely connected.
English
4
FCC STATEMENT
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
FCC CAUTION:
To assure continued compliance, follow the attached
installation instructions and use only the provided
power supply cord. Any changes or modifications
not expressly approved by Panasonic Corp. of North
America could void the user’s authority to operate
this device.
Supplier’s Declaration of Conformity
Model No.
TH-86EQ1W, TH-75EQ1W, TH-65EQ1U,
TH-55EQ1U, TH-50EQ1U, TH-43EQ1U
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey
07102-5490
Contact Source:
Panasonic System Solutions Company of North
America
1-877-655-2357
General Contact:
http://shop.panasonic.com/support
This device complies with Part 15 of the FCC Rules and
all applicable IC RSS standards. Operation is subject
to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesired operation.
CANADIAN NOTICE:
This Class A digital apparatus complies with
Canadian ICES-003.
WARNING:
Not for use in a computer room as defined in the
•
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
For permanently connected equipment, a readily
•
accessible disconnect device shall be incorporated
in the building installation wiring.
For pluggable equipment, the socket-outlet shall
•
be installed near the equipment and shall be easily
accessible.
Note:
Image retention may occur. If you display a still
picture for an extended period, the image might
remain on the screen. However, it will disappear when
a general moving picture is displayed for a while.
Trademark Credits
Microsoft, Windows, Internet Explorer and Microsoft
•
Edge are the registered trademarks or trademarks
of Microsoft Corporation in the United States and/or
other countries.
Mac, macOS and Safari are the trademarks of
•
Apple Inc. registered in the United States and other
countries.
PJLink is a registered or pending trademark in Japan,
•
the United States, and other countries and regions.
HDMI, High-Definition Multimedia Interface and the
•
HDMI Logo are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc. in the United
States and other countries.
JavaScript is a registered trademark or a trademark of
•
Oracle Corporation and its subsidiary and associated
companies in the United States and/or other
countries.
Crestron Connected, Crestron Connected logo,
•
Crestron Fusion, Crestron RoomView and RoomView
are trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other
countries.
Even if no special notation has been made of company
or product trademarks, these trademarks have been fully
respected.
English
5
Important Safety
86-inch model
75-inch model
65-inch model
86-inch model
75-inch model
65-inch model
Notice
WARNING
1) To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
No naked flame sources, such as lighted candles,
should be placed on / above the set.
2) To prevent electric shock, do not remove cover. No
user serviceable parts inside. Refer servicing to
qualified service personnel.
3)
Do not remove the earthing pin on the power
plug. This apparatus is equipped with a three pin
earthing-type power plug. This plug will only fit an
earthing-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact an electrician.
Do not defeat the purpose of the earthing plug.
4)
To prevent electric shock, ensure the earthing pin
on the AC cord power plug is securely connected.
CAUTION
This appliance is intended for use in environments
which are relatively free of electromagnetic fields.
Using this appliance near sources of strong
electromagnetic fields or where electrical noise may
overlap with the input signals could cause the picture
and sound to wobble or cause interference such as
noise to appear.
To avoid the possibility of harm to this appliance, keep
it away from sources of strong electromagnetic fields.
IMPORTANT INFORMATION
If a display is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
Using cabinets or stands recommended by the
•
manufacturer of the display.
Only using furniture that can safely support the
•
display.
Ensuring the display is not overhanging the edge
•
of the supporting furniture.
Not placing the display on tall furniture (for
•
example, cupboards or bookcases) without
anchoring both the furniture and the display to a
suitable support.
Not standing the displays on cloth or other
•
materials placed between the display and
supporting furniture.
Educating children about the dangers of climbing
•
on furniture to reach the display or its controls.
WARNING:
This equipment is compliant with Class A of CISPR32.
In a residential environment this equipment may
cause radio interference.
English
6
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin
mains plug for your safety and convenience. A 10
amp fuse is fitted in this plug. Shall the fuse need to
be replaced, please ensure that the replacement fuse
has a rating of 10 amps and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark
the body of the fuse.
If the plug contains a removable fuse cover, you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the
one supplied with this display.
The supplied mains lead and moulded plug are
designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged,
purchase a replacement from an authorized dealer.
WARNING : — THIS DISPLAY MUST BE EARTHED
How to replace the fuse.
Open the fuse compartment with a screwdriver and
replace the fuse.
or the BSI mark on
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin
mains plug for your safety and convenience. A 5 amp
fuse is fitted in this plug. Shall the fuse need to be
replaced, please ensure that the replacement fuse
has a rating of 5 amps and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark
the body of the fuse.
If the plug contains a removable fuse cover, you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the
one supplied with this display.
The supplied mains lead and moulded plug are
designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged,
purchase a replacement from an authorized dealer.
How to replace the fuse.
Open the fuse compartment with a screwdriver and
replace the fuse.
or the BSI mark on
English
7
Safety Precautions
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
86-inch model
75-inch model
43-inch model
75-inch model
65-inch model
55-inch model
50-inch model
86-inch model
86-inch model
75-inch model
65-inch model
50-inch model
55-inch model
43-inch model
WARNING
■ Setup
This LCD Display is for use only with the following
optional accessories.
Use with any other type of optional accessories may
cause instability which could result in the possibility
of injury.
Securely install the pedestal and wall hanging
bracket of the optional accessories. Ask an
authorized dealer for installation.
The following number of people are required for
installation.
: 2 or more
Pedestal
•
: TY-ST75PE9
: TY-ST55PE9
TY-ST43PE8
Wall hanging bracket
•
TY-WK98PV1
Early Warning Software
•
(Basic license/3-year license):
ET-SWA100 series
*
1: This product can be purchased in the U.S. and
Japan.
*
2: Suffix of the part number may differ depending on
the license type.
Note
●
The part number of the optional accessories are
subject to change without notice.
When installing the pedestal or wall hanging bracket,
read the operating instructions supplied with it carefully
and install properly. Also, always use the overturn
prevention accessories.
We are not responsible for any product damage, etc.
caused by failures in the installation environment for
the pedestal or wall hanging bracket even during the
warranty period.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
The Display may fall off or tip over.
•
: 4 or more
1
*
:
:
2
*
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
Dropping or falling of the unit may cause injury or
•
malfunction.
Caution - For use only with UL Listed Wall Mount
Bracket with minimum weight/load 66.0
(145.5 lbs).
When installing the display vertically, be sure that
the power indicator comes to the right side.
Power indicator
Power indicator
Power indicator
If installed in different directions, heat is generated
•
and it may cause fire or damage to the Display.
Cautions for Wall or Pedestal Installation
The installation should be performed by an installation
•
professional. Installing the Display incorrectly may
lead to an accident that results in death or serious
injury. Use the optional Pedestal. (see page 8)
When installing on a wall, the specified wall hanging
•
bracket (optional accessory) or a wall hanging bracket
that conforms to VESA standards must be used.
: VESA 600 × 400
: VESA 400 × 400
: VESA 400 × 200
: VESA 200 × 200
(see page 11)
Before installation, be sure to check if the mounting
•
location has enough strength to support the weight of
the display and the wall hanging bracket for anti drop.
If you terminate the use of the product, ask a
•
professional to remove it promptly.
When mounting the Display on the wall, prevent the
•
mounting screws and power cable from contacting
metal objects inside the wall. An electric shock may
occur if they contact metal objects inside the wall.
English
8
■ When using the LCD Display
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
86-inch model
75-inch model
65-inch model
The Display is designed to operate on 110 ‒ 240 V
AC, 50/60 Hz.
The Display is designed to operate on 110 ‒ 127 or
220 ‒ 240 V AC, 50/60 Hz.
If problems or malfunction occur, stop using
immediately.
If problems occur, unplug the power supply plug.
Smoke or an abnormal odour come out from the unit.
•
No picture appears or no sound is heard,
•
occasionally.
Liquid such as water or foreign objects got inside the
•
unit.
The unit has deformed or broken parts.
•
If you continue to use the unit in this condition, it
could result in fire or electric shock.
Unplug the power supply plug from the wall outlet,
•
and then contact the dealer for repairs.
To cut off the power supply to this Display completely,
•
you need to unplug the power supply plug from the
wall outlet.
Repairing the unit yourself is dangerous, and shall
•
never be done.
To enable to unplug the power supply plug
•
immediately, use the wall outlet which you can reach
easily.
Do not touch the unit directly by hand when it is
damaged.
Electric shock could occur.
•
Do not stick any foreign objects into the Display.
Do not insert any metal or flammable objects into the
•
ventilations holes or drop them onto the Display, as
doing so can cause fire or electric shock.
Do not remove the cover (cabinet) or modify it.
High voltages which can cause fire or electric shocks
•
are present inside the Display. For any inspection,
adjustment and repair work, please contact your local
Panasonic dealer.
Ensure that the mains plug is easily accessible.
The mains plug shall be connected to a mains
socket outlet with a protective earthing connection.
Do not use any power supply cord other than that
provided with this unit.
Doing so may cause short-circuit, generates heat,
•
etc., which could cause electric shock or fire.
Do not use the supplied power supply cord with any
other devices.
Doing so may cause short-circuit, generates heat,
•
etc., which could cause electric shock or fire.
Clean the power supply plug regularly to prevent it
becoming dusty.
If there is a build up of dust on the plug, the resultant
•
humidity may cause short-circuit, which could cause
electric shock or fire. Unplug the power supply plug
from the wall outlet and wipe it with a dry cloth.
Do not handle the power supply plug with wet
hands.
Doing so may cause electric shocks.
•
Securely insert the power supply plug (socket outlet
side) and the power supply connector (main unit
side) as far as it will go.
If the plug is not fully inserted, heat may be generated
•
which could cause fire. If the plug is damaged or the
wall socket is loose, they shall not be used.
Do not do anything that may damage the power
supply cord or the power supply plug.
Do not damage the cable, make any modifications
•
to it, place heavy objects on top of it, heat it, place it
near any hot objects, twist it, bend it excessively or
pull it. To do so may cause fire and electric shock. If
the power cable is damaged, have it repaired at your
local Panasonic dealer.
Do not touch the power supply cord or the plug
directly by hand when they are damaged.
Doing so may cause electric shock or fire due to
•
short-circuit.
Keep the supplied AAA/R03/LR03 batteries, M4
screw and washer out of reach of children. If
accidentally swallowed, it will be harmful to the
body.
Please contact a doctor immediately in case you
•
doubt that the child may have swallowed it.
To prevent the spread of fire, keep
candles or other open flames away from
this product at all times.
English
9
CAUTION
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
Do not place any objects on top of the Display.
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, table cloths and curtains.
Doing so may cause the Display to overheat, which
•
can cause fire or damage to the Display.
For sufficient ventilation, see page 11.
Do not place the display where it may be affected by
salt or corrosive gas.
Doing so may cause the display to fall due to
•
corrosion, and it may result in injury. Also, the unit
may malfunction.
The following number of people are required to carry
or unpack this unit.
: 2 or more
If this is not observed, the unit may drop, resulting in
•
injury.
When disconnecting the power supply cord, always
pull on the plug (socket outlet side) / the connector
(main unit side).
Pulling the cord may damage the cord, and it may
•
cause electric shock or fire due to short-circuit.
Be sure to disconnect all cables and overturn
prevention accessories before moving the Display.
If the Display is moved while some of the cables are
•
still connected, the cables may become damaged,
and fire or electric shock could result.
Disconnect the power supply plug from the wall
socket as a safety precaution before carrying out
any cleaning.
Electric shocks can result if this is not done.
•
Do not step on, or hang from the display or the
Pedestal.
They might tip over, or might be broken and it may
•
result in injury. Pay special attention to the children.
Do not reverse the polarity (+ and -) of the battery
when inserting.
Mishandling the battery may cause its explosion
•
or leakage, resulting in fire, injury or damage to
surrounding properties.
Insert the battery correctly as instructed. (see page
•
14)
Do not use batteries with the outer cover peeling
away or removed.
Mishandling the batteries may cause the batteries
•
to short circuit, resulting in fire, injury or damage to
surrounding properties.
Remove the batteries from the remote control
transmitter when not using for a long period of time.
The battery may leak, heat, ignite or burst, resulting in
•
fire or damage to surrounding properties.
: 4 or more
Remove exhausted batteries from the remote control
immediately.
Leaving the batteries unattended in it may cause
•
battery leakage, heat or burst.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such
•
as sunshine, fire or the like.
Do not turn the Display upside down.
Do not position the unit with its liquid crystal panel
facing upright.
English
10
Precautions for use
Cautions when installing
Do not set up the Display outdoors.
The Display is designed for indoor use.
•
Install this unit at a location which can support the
weight of the unit.
Dropping or falling of the unit may cause injury.
•
Environmental temperature to use this unit
When using the unit where it is below 1 400 m
•
(4 593 ft) above sea level: 0 °C to 40 °C (32 °F to
104 °F)
When using the unit at high altitudes (1 400 m
•
(4 593 ft) and higher and below 2 800 m (9 186 ft)
above sea level): 0 °C to 35 °C (32 °F to 95 °F)
Do not install the unit where it is 2 800 m (9 186 ft)
and higher above sea level.
Failure to do so may shorten the life of the internal
•
parts and result in malfunctions.
We are not responsible for any product damage, etc.
caused by failures in the installation environment
even during the warranty period.
Transport only in upright position!
Transporting the unit with its liquid crystal panel
•
facing upright or downward may cause damage to the
internal circuitry.
Do not grab the liquid crystal panel.
Do not forcibly press the liquid crystal panel, or push
•
it with a pointed object. Applying a strong force to
the liquid crystal panel will cause unevenness of the
screen display, resulting in malfunction.
Do not install the product to a place where the
product is exposed to direct sunlight.
If the unit is exposed to direct sunlight even indoors,
•
the temperature rise of the liquid crystal panel may
cause malfunction.
Required space for ventilation
When using the pedestal, leave a space of 10 cm
•
(3 15/16”) or more at the top, left and right, and 5 cm
31/32”) or more at the rear, and also keep the space
(1
between the bottom of the display and the table
surface.
If using some other setting-up method (wall-hanging,
etc.), follow the manual of it. (If there is no specific
indication of installation dimension in the installation
manual, leave a space of 10 cm (3
the top, bottom, left and right, and 5 cm (1 31/32”) or
more at the rear.)
Minimum distance:
a
a
a
15/16”) or more at
a: 10 cm
b
15/16”)
(3
b: 5 cm
31/32”)
(1
Operation of this unit is guaranteed up to an ambient
•
temperature of 40 °C (104 °F). When installing the
unit in a case or chassis, be sure to provide adequate
ventilation with a cooling fan or ventilation hole so
that the surrounding temperature (inside the case or
chassis) including the temperature of the front surface
of the liquid crystal panel can be kept at 40 °C
(104 °F) or less.
About the screws used when using a wall hanging
bracket that conforms to VESA standards
Inch
model
Screw pitch for
installation
Depth of
screw hole
Screw
(quantity)
86 600 mm × 400 mm 16 mm M8 (4)
75 600 mm × 400 mm 10 mm M6 (4)
65 400 mm × 400 mm 10 mm M6 (4)
55 400 mm × 200 mm 10 mm M6 (4)
50 400 mm × 400 mm 10 mm M6 (4)
43 200 mm × 200 mm 10 mm M6 (4)
Note for connection
Removing and inserting the power cord and
connection cables
When the unit has been installed on the wall, if the
•
power cord and connection cables are difficult to
remove and insert, make connections first before
installation. Be careful not to allow the cables to be
entangled. After installation is completed, insert the
power plug to the outlet.
When using
Be careful of the movable structure of the power
indicator and remote control sensor.
As factory default, the power indicator and remote
•
control sensor are stored in the main unit. For normal
use, pull out the remote control sensor from the edge
side of the main unit by operating the lever on the
rear panel. Depending on the setup condition such as
when using the multi display, store the remote control
sensor in the main unit. (see page 28)
Depending on the temperature or humidity
conditions, uneven brightness may be observed.
This is not a malfunction.
This unevenness will disappear while applying current
•
continuously. If not, consult the distributor.
If the Display is not going to be used for any
prolonged length of time, unplug the power supply
plug from the wall outlet.
Picture noise may occur if you connect / disconnect
the cables connected to the input terminals you
are currently not watching, or if you turn the power
of the video equipment on / off, but it is not a
malfunction.
English
11
Notes on Using Wired LAN
When setting up the Display at a place, where
electric statistic occurs often, take a sufficient
antistatic measure before start using.
When the Display is used at a location, where static
•
electricity occurs often, such as on a carpet, a wired
LAN communication is disconnected more often.
In that case, remove static electricity and the noise
source that may cause problems with an antistatic
mat, and re-connect the wired LAN.
In rare cases, the LAN connection is disabled due
•
to static electricity or noise. In that case, turn off the
power of the Display and the connected devices once
and then re-turn on the power.
The Display may not work properly due to strong
radio wave from the broadcast station or the radio.
If there is any facility or equipment, which outputs
•
strong radio wave, near the installation location, set
up the Display at a location sufficiently far from the
source of the radio wave. Or, wrap the LAN cable
connected to the LAN terminal by using a piece of
metal foil or a metal pipe, of which is grounded at
both ends.
Request Regarding Security
When using this unit, take safety measures against
the following incidents.
Personal information being leaked via this unit
•
Unauthorized operation of this unit by a malicious
•
third party
Interfering or stopping of this unit by a malicious third
•
party
Take sufficient security measures. (see page 84, 89)
Set a password for the LAN control and restrict the
•
users who can log in.
Make your password difficult to guess as much as
•
possible.
Change your password periodically.
•
Panasonic Corporation or its affiliate companies will
•
never ask for your password directly. Do not divulge
your password in case you receive such inquiries.
The connecting network must be secured by a
•
firewall, etc.
When disposing the product, initialize the data before
•
disposing. ([Shipping] (see page 121))
Cleaning and maintenance
First, remove the mains plug from the mains socket.
Gently wipe the surface of the liquid crystal panel or
cabinet by using a soft cloth to remove dirt.
To remove stubborn dirt or fingerprints on the surface
•
of the liquid crystal panel, dampen a cloth with diluted
neutral detergent (1 part detergent to 100 parts
water), wring out the cloth firmly, and then wipe away
the dirt. Finally, wipe away all the moisture with a dry
cloth.
If water droplets get inside the unit, operating
•
problems may result.
Note
●
The surface of the liquid crystal panel is specially
treated. Do not use a hard cloth or rub the surface
too hard, otherwise this may cause scratches on the
surface.
Usage of a chemical cloth
Do not use a chemical cloth for the liquid crystal panel
•
surface.
Follow the instructions for the chemical cloth to use it
•
for the cabinet.
Avoid contact with volatile substances such as
insect sprays, solvents and thinner.
This may cause damage to the cabinet or cause
•
peeling of the paint. Furthermore, do not leave it in
contact with a rubber or PVC substance for a long
time.
Disposal
When disposing the product, ask your local
authority or dealer about the correct methods of
disposal.
12
English
Accessories
86-inch model
75-inch model
55-inch model
50-inch model
65-inch model
43-inch model
Accessories Supply
Check that you have the accessories and items shown.
Operating Instructions
(CD-ROM × 1)
Power supply cord
TH-86EQ1W
TH-75EQ1W
(Approx. 2 m)
●
1JP155AF1U
●
1JP155AF1W
Remote Control Transmitter
× 1
●
DPVF1615ZA
4-pole mini plug conversion
cable × 1
●
DPVF1652ZA
Batteries for the Remote
Control Transmitter × 2
(AAA/R03/LR03 type)
Clamper × 3
●
DPVF1056ZA
USB memory cover × 1
●
DPVF2281ZA/X1
●
DPVF2280ZA/X1
●
2JP155AF1W
●
3JP155AF1W
TH-65EQ1U
(Approx. 2 m)
●
1JP155AF1U
TH-55EQ1U
TH-50EQ1U
TH-43EQ1U
(Approx. 1.8 m)
●
TZSH03042
●
DPVF2282ZA/X1
English
13
TH-65EQ1W
(Approx. 2 m)
●
1JP155AF1W
●
2JP155AF1W
●
3JP155AF1W
Remote Control Batteries
Open the battery cover.
Insert batteries and close
the battery cover.
(Insert starting from the
side.)
AAA/R03/LR03 type
TH-55EQ1W
TH-50EQ1W
TH-43EQ1W
(Approx. 1.8 m)
●
TZSH03039
●
TZSH03040
●
TZSH03041
Attention
●
Store small parts in an appropriate manner, and keep
them away from young children.
●
The part numbers of accessories are subject to
change without notice. (The actual part number may
differ from the ones shown above.)
●
In case you lost accessories, please purchase them
from your dealer. (Available from the customer
service)
●
Dispose the packaging materials appropriately after
taking out the items.
Note
●
Incorrect installation of the batteries can cause
battery leakage and corrosion that will damage the
remote control.
●
Disposal of batteries should be done in an
environment-friendly manner.
Take the following precautions.
1. Batteries shall always be replaced as a pair.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example; manganese
dioxide battery and alkaline battery etc.).
4. Do not attempt to charge, disassemble or burn used
batteries.
5. Do not burn or breakup batteries.
Moreover, batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
14
English
Attaching the USB Memory Cover
86-inch model
75-inch model
55-inch model
50-inch model
65-inch model
43-inch model
75-inch model
86-inch model
86-inch model
75-inch model
86-inch model
75-inch model
When using a USB memory device, the USB memory
cover can be attached to protect the device.
Cautions when moving
Attach the USB memory cover using
any of the following screw positions
corresponding to the type of model.
USB memory cover
B:
A:
Insert the USB memory device to
1
C:
the USB terminal on the side of the
display.
USB terminal
USB memory
Attach the USB memory cover,
2
aligning the M4 screw with the screw
hole of the display unit.
Tighten the M4 screw to fix the USB
3
memory cover.
The display has handles for carrying. Hold them when
moving.
Handle
Handle
Note
●
Do not hold parts other than the handles.
●
The following number of people are required to carry
this unit.
If this is not observed, the unit may drop, resulting in
injury.
●
When carrying the unit, keep the liquid crystal panel
upright.
Carrying the unit with the surface of the liquid crystal
panel facing up or down may cause deformation of
the panel, or internal damage.
●
Do not hold the upper, lower, right and left frames or
the corners of the unit. Do not hold the front surface
of the liquid crystal panel. Also, do not hit such parts.
Doing so may damage the liquid crystal panel.
Also, the panel may crack, resulting in injury.
: 4 or more
M4 screw
English
15
Eyebolt
75-inch model
86-inch model
The display has holes for attaching eyebolts (M10).
When installing, use them to suspend the display.
Use the eyebolt only for temporary suspension or
movement for installation. This cannot be used for
permanent hanging installation.
Note
●
The 86/75-inch models have the holes for attaching
eyebolts. 65/55/50/43-inch models don’t.
Eyebolt (commercially available) mounting positions
Note
●
Installation should be performed by an installation
professional.
●
Do not suspend using only 1 eyebolt.
●
Use commercially sold M10 eyebolts with a shank
length of 12 mm to 40 mm that satisfies the load
condition of product quality.
●
Use ISO 3266 standard eyebolts. Also use ISO
standard members (wire, etc.) for hanging.
●
The hanging angle should be 60° or more.
●
After installation, remove the eyebolts, and close the
holes using the eyebolt caps removed when attaching
the eyebolts.
12 mm to 40 mm
60° or more
English
16
Connections
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
AC cord connection and fixing / Cable fixing
Back of the unit
AC cord fixing
Plug the connector into the display unit.
Plug the connector until it clicks.
Note
●
Make sure that the connector is locked on both the
left and right sides.
Unplug the AC cord
AC cord (supplied)
Back of the unit
Insert the AC cord securely all the way seated on
the back side of the unit.
Insert the plug until the line is hidden.
Class II equipment
Note
●
When disconnecting the AC cord, be absolutely sure
to disconnect the AC cord plug at the socket outlet
first.
●
The supplied AC cord is for this unit exclusive use.
Do not use this for other purposes.
AC cord
(supplied)
Unplug the connector pressing the two knobs.
Note
●
Do not use an AC cord of which the knobs are
damaged. If it is used with the knobs damaged, a
bad connection may result between the AC cord
connector and the AC IN terminal. For the repair of
the AC cord, consult the dealer where you purchased
the product.
●
When disconnecting the AC cord, be absolutely sure
to disconnect the AC cord plug at the socket outlet
first.
●
The supplied AC cord is for this unit exclusive use. Do
not use this for other purposes.
English
17
Cable fixing
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
Note
●
3 clampers are supplied with this unit. Fix the cables
at 3 locations using the holes for clampers as shown
below.
●
Before turning the power on, stop the holes (3
locations) with the clampers.
Otherwise, foreign objects may enter the holes,
resulting in a fire.
If you need more clampers, purchase them from
•
your dealer. (Available from the customer service)
1. Attach the clamper
To remove from
the unit:
2. Bundle the cables
hooks
To loosen:
knob
hole
Insert the clamper in a
hole.
snaps
Keep pushing both side
snaps and pull out the
clamper.
Set the tip in the hooks
and tighten.
Keep pushing the knob
and pull out the tip.
English
18
Video equipment connection
10
1 AUDIO OUT: Analogue Audio Output
2 AUDIO IN: Analogue Audio Input Terminal
3 AV IN
(VIDEO):
4 SERIAL IN: SERIAL Input Terminal
5 PC IN: PC Input Terminal
6 DVI-D IN: DVI-D Input Terminal
Terminal
Connect to audio equipment with
analogue audio input terminal.
(see page 26)
(see page 21, 22)
Composite Video / Audio Input
Terminal
Connect to video equipment with
Composite signal output.
(see page 23)
Control the Display by connecting
to PC.
(see page 24)
Connect to video terminal of PC,
video equipment with “YP
YCBCR” or “RGB” output.
(see page 22)
Connect to video equipment with
DVI-D output.
(see page 21)
BPR /
7 USB: USB Terminal
Connect the USB memory to use
“USB media player” or “Memory
viewer”. Also, this can be used to
supply power of up to 5V/2A to an
external device when the picture
is displayed.
(see page 26)
8 LAN: LAN Terminal
Control the Display by connecting
to Network.
(see page 76)
9 IR IN, IR OUT: Infrared Signal Input / Output
10 AV IN
(HDMI 1,
HDMI 2):
Terminal
Use this when operating more
than one display with one remote
control.
(see page 25)
HDMI Input Terminal
Connect to video equipment such
as VCR or DVD player, etc.
(see page 20)
English
19
Before connecting
●
Before connecting cables, carefully read the operating
instructions for the external device to be connected.
●
Turn off the power of all devices before connecting
cables.
●
Take note of the following points before connecting
the cables. Failure to do so may result in
malfunctions.
When connecting a cable to the unit or a device
•
connected to the unit itself, touch any nearby
metallic objects to eliminate static electricity from
your body before performing work.
Do not use unnecessarily long cables to connect
•
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
When connecting cables, insert them straight into
•
the connecting terminal of the connecting device
so that the ground is connected first.
●
Acquire any cable necessary to connect the external
device to the system that is neither supplied with the
device nor available as an option.
●
If the outer shape of the plug of a connection cable is
large, it may come in contact with the periphery such
as a back cover or the plug of an adjacent connection
cable. Use a connection cable with the suitable plug
size for the terminal alignment.
●
When connecting the LAN cable with plug cover, be
aware that the cover may come in contact with the
back cover and it may be difficult to disconnect.
●
If video signals from video equipment contain too
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
●
When the sync signals output from PC or video
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
●
The unit accepts Composite video signals, YP
YCBCR signals (PC IN), analogue RGB signals (PC
IN) and digital signals.
●
Some PC models are not compatible with the unit.
●
Use cable compensator when you connect devices to
the unit using long cables. Otherwise the image may
not be displayed properly.
●
Refer to “Preset Signals” (see page 118 ) for the types
of video signals that can be displayed with the unit.
BPR/
HDMI 1 and HDMI 2 terminals connection
Note
●
Video equipment and HDMI cable shown are not
supplied with this unit.
●
Connect the equipment complying with the HDMI
standard.
●
Some HDMI equipment may not be able to display
picture.
●
This Display does not support VIERA LINK.
●
For audio, it is also possible to use AUDIO IN or AV
IN terminal. (For [Audio input select] function, see
page 59.)
HDMI cable (commercially available)
Video Cassette Recorder
DVD Player
PC
20
English
Pin assignments and signal names for HDMI
Terminal
Pin No. Signal name
T.M.D.S Data2 +
T.M.D.S Data2 Shield
T.M.D.S Data2 -
T.M.D.S Data1 +
T.M.D.S Data1 Shield
T.M.D.S Data1 -
T.M.D.S Data0 +
T.M.D.S Data0 Shield
T.M.D.S Data0 -
T.M.D.S Clock +
T.M.D.S Clock Shield
T.M.D.S Clock -
CEC
SCL
SDA
DDC/CEC Ground
+5V DC
Hot Plug Detect
DVI-D IN terminal connection
Note
●
Video equipment and cables shown are not supplied
with this unit.
●
DVI-D IN terminal is for Single Link only.
●
For audio, the AV IN terminal can be used in addition
to the AUDIO IN terminal. (For [Audio input select]
function, see page 59.)
●
Use the DVI-D cable complying with the DVI
standard. (Depending on the cable length or its
quality, noise may occur on images, or the image
quality may deteriorate.)
DVI-D cable (within 5 m) (commercially available)
Stereo mini plug (M3) cable (commercially available)
PC with DVI-D out
English
21
Pin assignments and signal names for DVI-D Input/
Output
PC IN terminal connection
Pin No. Signal Name
T.M.D.S. data 2 T.M.D.S. data 2 +
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1 T.M.D.S. data 1 +
T.M.D.S. data 1 shield
+5 V DC
GND (Ground)
Hot plug detect
T.M.D.S. data 0 T.M.D.S. data 0 +
T.M.D.S. data 0 shield
T.M.D.S. clock shield
T.M.D.S. clock +
T.M.D.S. clock -
(Female)
Mini D-sub 15p cable (commercially available)
Conversion adapter (if necessary) (commercially
available)
Stereo mini plug (M3) cable (commercially available)
PC
The type of computer signal that can be connected
●
With regard to the typical PC input signals that
are described in “Preset Signals” (see page 118 ),
adjustment values such as for the standard picture
positions and sizes have already been stored in this
unit.
(Computer signals which can be input are those with
a horizontal scanning frequency of 30 to 110 kHz and
vertical scanning frequency of 48 to 120 Hz.)
●
The display resolution is a maximum of 1 440 x
1 080 dots when the aspect mode is set to [Normal],
and 1 920 x 1 080 dots when the aspect mode is
set to [Full]. If the display resolution exceeds these
maximums, it may not be possible to show fine detail
with sufficient clarity.
●
If signals outside the range of supported frequencies
are input, normal images cannot be displayed. Note
that some images may not be correctly displayed
even if signals are within the range.
●
If the PC screen is not displayed, check if the image
signal of the PC meets “Preset Signals” (see page
118 ), and then change the settings. For power-saving
purpose, image output may be OFF on a notebook
computer. In this case, it may be set to ON with
function key operation etc. of the computer. (Refer to
the manual of the computer.)
(Male)
Connect a cable
which matches
the audio output
terminal on the
computer.
(commercially
available)
22
English
Note
123
4
●
Component video signal is supported with this
terminal (Mini D-sub 15P).
Select an input signal mode with [Setup] - [PC input
mode] according to the input signal. (see page 75)
●
According to the [PC input mode] setting, the
synchronized signal supports the following inputs
only. (see page 75)
[PC]: HD/VD signal input only
BPR]]: Only the synchronized signal
[PC[YP
●
Additional computer, cables and conversion adapter
shown are not supplied with this set.
●
If the computer being connected is not DDC2Bcompatible, you will need to make setting changes to
the computer at the time of connection.
●
When connecting a computer equipped with a
D-sub15 pin terminal or a Mac, use a commercially
sold conversion adapter as necessary.
There is no need to use an adapter for computers
*
with DOS/V compatible Mini D-sub 15P terminal.
●
Do not set the horizontal and vertical scanning
frequencies for PC signals which are above or below
the specified frequency range.
●
For audio, the AV IN terminal can be used in addition
to the AUDIO IN terminal. (For [Audio input select]
function, see page 59.)
Pin assignments and signal names for PC Input
Terminal (Mini D-sub 15P)
superimposed on Y signal input
45
10
15 14 13 12 11
1
2
67839
AV IN terminal connection
Note
●
Video equipment and connection cables are not
supplied with this unit.
●
For audio, the AUDIO IN terminal can be used in
addition to the AV IN terminal. (For [Audio input
select] function, see page 59.)
Yellow
White
Red
4-pole mini plug conversion cable (supplied)
Audio video pin cable (commercially available)
Video Cassette Recorder
DVD Player
Wiring specifications for 4-pole mini plug
Note
●
Use a 4-pole mini plug (M3) (supplied) with the
following wiring specifications for the AV IN terminal of
this unit. If the wiring of a plug is different, audio and
video are not correctly input.
Pin No. Signal Name
R (PR/CR)
G (Y)
B (PB/CB)
NC (not connected)
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
+5 V DC
GND (Ground)
NC (not connected)
SDA
HD/SYNC
VD
SCL
Audio L (White)
Audio R (Red)
GND (Ground)
Video (Yellow)
English
23
SERIAL IN terminal connection
The SERIAL terminal conforms to the RS-232C interface
specification, so that the Display can be controlled by a
computer which is connected to this terminal.
Note
●
Additional computer and cables shown are not
supplied with this set.
(Male)
(Female)
D-sub 9p
RS-232C Straight cable (commercially available)
PC
Note
●
Select the RS-232C straight cable for communication
used for connecting SERIAL terminal and computer
according to the computer you are using.
Pin assignments and signal names for SERIAL
Terminal
1 3 4 52
6 7 8 9
Pin No. Signal Name
NC (not connected)
RXD
TXD
Non use
GND (Ground)
Non use
RTS
CTS
NC (not connected)
These signal names are those of computer
specifications.
Communication parameters
Signal level: RS-232C compliant
Synchronization method: Asynchronous
Baud rate: 9 600 bps
Parity: None
Character length: 8 bits
Stop bit: 1 bit
Flow control: None
Basic format for control data
The transmission of control data from the computer
starts with a STX signal, followed by the command, the
parameters, and lastly an ETX signal in that order. Add
parameters as required according to control details.
STX C1 C2 C3 P1 P2 P3 P4: P5 ETX
Start
Shorted in this set
Colon
End
24
English
3-character command
(3 bytes)
Parameter(s)
Command
Command Parameter Control details
PON None Power ON
POF None Power OFF
AVL
AMT
IMS
DAM
Note
●
If multiple commands are transmitted, be sure to wait
for the response for the first command to come from
this unit before sending the next command.
●
If an incorrect command is sent by mistake, this unit
will send an “ER401” command back to the computer.
●
When sending a command which does not require
parameter, a colon (:) is not needed.
●
Consult your local Panasonic dealer for detail
instructions on command usage.
For more details, visit the following web site.
https://panasonic.net/cns/prodisplays/
＊＊＊
0 Audio MUTE OFF
1 Audio MUTE ON
None Input select (toggle)
HM1
HM2
DV1
PC1 PC IN input (PC)
VD1 AV IN input (VIDEO)
UD1 USB input (USB)
MV1
None
FULL Full
NORM Normal
NATV Native
HFIT H fit
VFIT V fit
ZOOM Zoom1
ZOM2 Zoom2
Volume000‒100
HDMI 1 input
(HDMI1)
HDMI 2 input
(HDMI2)
DVI-D IN input
(DVI-D)
“Memory viewer”
input
(MEMORY VIEWER)
Screen mode select
(toggle)
IR IN / IR OUT terminal connection
Connect the mini plug (M3) cable from the IR OUT
terminal of the first display to the IR IN terminal of the
second display.
The infrared signal of the first display is sent to the
second display.
In this case, the IR (infrared ray reception on the remote
control sensor) on the second display does not operate.
Repeating the above connections enables the daisy
chain connection.
Note
●
Connection cables are not supplied with this unit.
●
Daisy chain connection is possible only between the
displays of the same series.
Stereo mini plug (M3) cable (commercially available)
First display
Second display
Third display
English
25
AUDIO OUT terminal connection
Note
●
Audio equipment and the cable shown are not
supplied with this set.
Stereo mini plug
(M3)
line-in
Stereo audio cable (commercially available)
Audio equipment
Note
●
To output sound from AUDIO OUT terminal of the
unit, be sure to set [Output select] in the [Sound]
menu to [AUDIO OUT]. (see page 41)
USB terminal connection
Connect the USB memory (commercially available) to
use “USB media player” or “Memory viewer”. (see page
93, 105)
Also, power is supplied when a separately sold stick PC,
etc. are connected.
Note
●
A stick PC and connection cables are not supplied
with this unit.
●
If the power is turned off or the USB memory device
is removed while accessing data in the USB memory
device, the stored data may be destroyed. The
access indicator of the USB memory device blinks
during data access.
●
The USB memory device can be connected or
disconnected whether or not the display is on.
26
Stick PC (commercially available)
USB cable (commercially available)
HDMI extension cable (commercially available)
English
Pin assignments and signal names for USB Terminal
1 3 42
Pin No. Signal name
+5 V DC
DATA DATA +
GND (Ground)
Power of up to 5V/2A can be supplied to an external
device when the picture is displayed.
●
If the electric current exceeding the power supplying
capability is applied, the output is blocked, and the
following message is displayed.
[USB DC5V OUT overload. Please remove cable or
equipment, then turn the display off/on.]
In this case, remove the equipment and then turn the
power off/on using the remote control, etc.
Note
●
If the direct connection to this unit is not possible due
to the size of a stick PC, etc. use a commercially sold
extension cable.
●
Depending on the type of a USB memory device,
it may come in contact with the periphery such as
a back cover, and cannot be attached. Use a USB
memory device connectable to this unit.
●
When connecting the USB memory device, confirm
the orientation of the plug to prevent damage to the
terminal.
●
When removing the USB memory device, note the
following.
When the access indicator of the connected USB
•
memory device is blinking, it shows the display is
loading the data. Do not remove the USB memory
device while blinking.
Depending on the USB memory device, the access
•
indicator may remain blinking even when it is not
being accessed, or the device is not equipped
with an access indicator function, etc. In this case,
remove the USB memory device after confirming
the following or .
Switch the input to an input other than [USB]
and [MEMORY VIEWER], and confirm that the
functions that access USB memory device are
finished. The functions are, read user image
function (see page 48), playlist edit function (see
page 48), data cloning function (see page 111),
etc.
Turn the unit off.
Do not frequently repeat connecting/disconnecting
•
the USB memory device. Wait at least 5 seconds
after connection, and then remove the USB
memory device. Before reconnection, wait at least
5 seconds. A certain length of time is required
so that the display can recognise that the USB
memory device is switched for connection or
disconnection.
If the power of this unit is turned off or the USB
•
memory device is removed accidentally while
accessing data, the data may not be accessed
next time the USB memory device is used.
In such a case, turn the power of the main unit off
and on.
English
27
Identifying Controls
75-inch model
65-inch model
55-inch model
50-inch model
86-inch model
43-inch model
Display
1
1
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON (Main Power On
/ Off button: ON)
●
Picture is displayed: green
●
When the unit enters the standby mode using the
following functions: orange (red / green)
Standby state with the “Power management”
•
function
About “Power management” function, see page 57.
Standby state with [HDMI-CEC control] set to
•
[Enable] and at least one [Link function] set to
other than [Disable]
About [HDMI-CEC control] setting and [Link
function], see page 59.
Standby state with [Network control] set to [On]
•
About “Network control” settings, see page 66.
Standby state during schedule play mode
•
About “Schedule play mode”, see page 102.
●
Standby state in conditions other than the above:
red
When the power of the unit is OFF (Main Power
On / Off button: OFF): No light
Note
●
Even if the unit is turned off with the power
indicator off, some of the circuits are in power-on
status.
●
When the power indicator is orange, power
consumption during standby is generally larger
than that of when the power indicator is red.
●
Slide the lever on the rear panel to eject the power
indicator and remote control sensor.
To store them, slide the same lever, or directly push in
the bottom surface of the remote control sensor.
Note
●
For normal use, pull out the power indicator and
remote control sensor from the edge side of the
main unit by operating the lever on the rear panel.
Depending on the setup condition such as when
using the multi display, store them in the main unit.
English
28
8
8
8
8
8
8
86-inch model
75-inch model
65-inch model
55-inch model
7 <ENTER (Unit)>
Configures the item on menu screen. (see page 37)
Switches aspect mode. (see page 35)
8 Built-in speakers
Sound is output backward.
Note
●
To output sound from the built-in speakers of the
unit, be sure to set [Output select] in the [Sound]
menu to [SPEAKERS]. (see page 41)
MENU ENTERINPUT
-
+
50-inch model
43-inch model
1 External input / output terminal
Connects to video equipment, PC, etc. (see page 19)
2 <Main Power On / Off button> (
Turns the power On / Off.
3 <INPUT (Unit)>
Selects the connected device. (see page 33)
4 <MENU (Unit)>
Displays the menu screen. (see page 37)
5 <+ (Unit)> / <- (Unit)>
Adjusts the volume. (see page 34)
On the main screen, switches settings or adjusts
settings level. (see page 37)
(Unit)> / < (Unit)>
6 <
Selects the setting item on menu screen. (see page
37)
)
English
29
Remote Control Transmitter
1 Standby (ON/OFF) button ( )
●
Turns the power on or off when the unit is turned
on at the <Main Power On / Off button>. (see page
32)
2 POSITION
(see page 39)
3 SETUP
(see page 48)
4 ENTER / Cursor buttons (
●
Used to operate the menu screens. (see page 37)
5 ZOOM
●
Enters the digital zoom mode. (see page 36)
6 DEFAULT
●
Resets the settings of picture, sound, etc., to
defaults. (see page 39, 41, 42)
7 MUTE
●
Sound mute on / off. (see page 34)
8 ASPECT
●
Adjusts the aspect. (see page 35)
9 VOL + / VOL -
●
Adjusts sound volume level. (see page 34)
10
AUTO SETUP
●
Automatically adjusts the position/size of the
screen. (see page 39)
11
INPUT
●
Switches input to display on the screen. (see page
33)
12
PICTURE
(see page 42)
13
SOUND
(see page 41)
)
14
RECALL
●
Displays the current setting status of Input mode,
Aspect mode, etc. (see page 33)
15
RETURN
●
Used to return to the previous menu. (see page 37)
16
FUNCTION
●
Displays [Function button guide].
(see page 70)
17
OFF TIMER
●
Switches to stand-by after a fixed period. (see
page 34)
18
Numeric buttons (1 - 6)
●
Used as shortcut buttons by assigning frequently
used operations. (see page 70)
19
Signal emission
Note
●
In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.
30
English
Loading...