Panasonic TH-43DX400L Schematic

11

LED Television

Model No. TH-43DX400L-TH-49DX400L

2

2

1. CAUTION

1. CAUTION

1. CAUTION1. CAUTION

CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.

CA U T ION

RISK OF ELECTRI C

SHOCK DO NOT OPEN.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
Alert the user to the presence of uninsulated dangerous Voltage within the products

Enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

the person.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CA UT ION : T O RE DUCE TH E RIS K OF
ELECTR ICA L SHOCK, DO NOT RE MOVE
COVER (OR BACK). NO USER SERVICEABLE
PAR TS INS IDE . RE FE R SER VIC ING TO
QUALIFIE D SERVICE PERSONNEL.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

2

3

3

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

Read all of these instructions. Save these instructions for later use. Foll ow all W arnings and
Instructions marked on the audio equipment.

1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1.

When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

2.

3.

Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.

Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous

4.
voltage or other hazards. Refer all servicing to qualified service personnel.

Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage

5.
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet

6.
and refer servicing to qualified service personnel.

If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to

7.
qualified service personnel.

Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

8.

9.

Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury

to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.

10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces

may cause the appliance and cart combination to overturn.

3

4

4

SCHNEIDER ELECTRONICS GMBH-GERMANY

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.

Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to

protect it from overheating. These openings must not be blocked or covered.

Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in a built-in enclosure, unless proper ventilation is provided.

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

ANTENNA

LEAD- IN WIRE

ANTENNA DISCHARGE

UNIT (NEC SECTION
810-20)

GROUNDING
CONDUCTORS
(NEC SECTION810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM
(NEC ART 250. PART H)

15.2. Note to CATV system installer : (Only for the television set with CATV reception)

This reminder is provided to call the CATV system installer s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.

16.

An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

For added protection for this television set during a lightning storm, or when it is left unattended and unused for long

17.

periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.

4

5

5

OPERATION OF YOUR SET

18.

This television set should be operated only from the type of power source indicated on the marking label.If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.

If the television set does not operate normally by following the operating instructions, unplug this television set from the

19.
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.

When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on

20.
a holiday, turn the television set off and unplug the television set from the wall outlet.

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by followingthe detailedprocedurein your operatinginstructions,

do not attempt any further adjustment. Unplug the set and call your dealer or service technician.

22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for

service, unplug the set and have it checked by a professional service technician.

23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being

turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommendedby the television set manufacturer as they may cause hazards.

25. When replacementparts are required, be sure the service technician has used replacementparts specified

by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.

26. Upon completion of any service or repairs to the television set, ask the service technician to perform

routine safety checks to determine that the television is in safe operating condition.

5

6

2016 LCD Specifications

2016 LCD

Model Number Smart 43” UHD

Basic Specification

Picture Quality

Display Panel IPS (D LED )

Sound Quality

Smart Features

Platform MSD6488(T2)

ID E5600

Stand Metal

Panel Vendor LGD

Bright Panel 280(Min)/300(Typ)(before PQ adjusting)

Contrast 600:1(Min)/1000:1(Typ)

Screen Resolution 3,840 (W) x 2,160 (H)

Aspect Ratio 16:9

Panel Drive DLED

Picture Mode Dynamic/Standard/Mild/User

Viewing Angle 176 degree

Noise Reduction Yes

3D No

Surround Mode Yes

Speakers Box speaker

Speaker Output 8 W x 2

Sound Mode Music/Movie/Standard/News/User

Voice Interaction No

Voice Guidance No

EPG Yes

On Screen Display Menu Languages

Wireless LAN Built-in Yes

USB-HDD Recording No

Internet Apps Facebook/Twitter/Youtube

Web Browser Yes

Easy Mirroring Yes

DLNA No

Bluetooth No

Media Player

Movie Support Format

Movie Support Video Codec

Movie Support Audio Codec

Music Support Format

Photo Support Format refer to media format list

Teletext Reception as per requirement

1.English/Simpied Chinese/Thai/

Indonesia/Myanmar(Burmes 3)/Vietnamese;

2.English/Hebrew for Israel.

refer to media format list

refer to media format list

refer to media format list

refer to media format list

7

Multi Window

Hotel Mode

Energy Data

Visible Screen Size (diagonal)

Rated Power Consumption

Standby Power Consumption

Power Supply

Ambient Sensor

Terminal

Digital Tuner Reception

Analogue Tuner

DisplayPort (4K 60/50p Input)

HDMI 2.0

HDMI (4K 60/50p with HDCP2.2)

USB

Support Feature

LAN Port

SD Card

Composite Input

Composite Audio Input

Component Input

Component Audio Input

Digital Audio Output (Coaxial)

Analogue Audio out

Earphone

VGA

VGA Audio Input

General

Included Accessory

Dimensions (W x H x D) (w/o stand)

Dimensions (W x H x D) (with stand)

Package size(W x H x D)

Net Weight (With stand)

Gross Weight (with stand)

Loading with pallet (20GP/40"GP/40"HQ)

Loading without pallet (20GP/40"GP/40"HQ)

VESA Compatible

Certificate & Regulation

RoHS

EMC

DTS

Dolby+

No

Yes

108 cm

100W/

0.5W

100~240V

No

DVB-T2 (MPEG1/2/4,H.264)

PAL B/G D/K/I, NTSC M

—

3(side*1,bottom*2)

Yes

2 (side USB 3.0 x 1,bottom USB2.0*1)

USB: Support 4K (30p)

HDMII:Support 4K (30p/60p)

1

—

1(side)

L+R(side)

1(bottom)

share with composite

1,Coaxial(bottom)

share with earphone

1(bottom)

1

1(bottom)

2 CABLES(Analogue Audio out, Component)

973.2 X 94.3 X 569mm

973.2 X 206.8 X 604.5mm

1060X153X650mm

9.5kg

12.6kg

210/420/420

237/480/640

Yes

Yes

No

No

Yes

8

Dolby

HDMI

CB

SRS

Local Certificate:

Safety

DTV REPORT (DVB-T2 or DTT )

Energy Efficiency Report

WIFI

EWS(Indonesia)

Local Parts purchased by PAVCKM/PAVCV

PAVCKM(43")

No

Yes

Yes

No

REMOTE CONTROL & BATTERY

REMOTE CONTROL & BATTERY & AC CORD,OI
BOOK,MODEL NAME PLATE,CARTON LABEL，
CARTON BOX,POLYFOAM

PAVCV(43")

9

Factory OSD Manual

1 TO ENTER FACTORY MAIN MENU

1.1 Press AV button and follow with key 3,1,9,5 one by one.

1.2 Factory main menu is as following:

2 ADC ADJUST

2.1 Press ▲/▼ button, choose ADC ADJUST and press OK button to enter.

Before adjusting, enter the channel you want to adjust and input adjust signal (YPBPR channel:

576P and 720P with 100% color bar; VGA channel: 1366*768 with tessellated white and black ).

Select ADC Tune, press ► button to auto adjust the ADC value.

10

100% color bar

tessellated white and black

Note: 1、The YPBPR and PC’s Auto White Balance adjust (AUTO ADC) must be done on the

product line.

2、In YPBPR channel ,must adjust the SD and HD two modes.

11

3 Picture Mutuality
W/B Adjust

Select W/B Adjust , go to the “MODE” item to select the channel which you want to adjust then

select TEMPERATURE (Medium, Warm, Cool). Then press ▼button to go to the items you want

to adjust:

R-GAIN

G-GAIN

B-GAIN

R-OFFSET

G-OFFSET

B-OFFSET

Press◄/► buttons can adjust the value to the best effect.

COPY ALL : Copy the values to all source!

Picture Mode

No adjust.

12

OverScan

Select OverScan , go to the “input source” item to select the channel which you want to adjust .

Then press ▼button to go to the items you want to adjust:

Left Crop

Right Crop

Up Crop

Down Crop

Press◄/► buttons can adjust the value to the best effect.

QMAP Adjust

No adjust.

4 Audio Mutuality

No adjust.

5 Non-Linear

Press OK button to choose a backlight, volume, brightness,contrast, saturation,sharpness,hue and

so on, press ◄/► buttons to nonlinear adjustment.

Brightness

Adjust the Brightness Curve.

Contrast

Adjust the Contrast Curve.

Saturation

Adjust the Saturation Curve.

Hue

Adjust the Hue Curve.

Sharpness

Adjust the Sharpness Curve.

Volume

Adjust the Volume Curve.

Backlight

Adjust the backlight Curve.

6 VIF Initialazation

No adjust.

7 System Setting

HOTKEY

Press◄/► button to switch factory hotkey on or off. For shipping condition, this item should be

off.

AGING MODE

Press◄/► button to switch aging mode on or off. When aging mode is on, press EXIT button to

exit this mode.

Default Country

13

No adjust.

POWER ON MODE

Press◄/► button to switch AC power on status. Memory is power on memorized, Seconda is

power on standby, Direct On is power on always.

Country Setup

No adjust.

PQ FILE...update

No adjust.

HDCP Key Update

No adjust.

CI Plus Key Update

No adjust.

IP Enable Mapping

No adjust.

Mac Addr Update

No adjust.

3D

No adjust.

Linux Time Source

No adjust.

Channels

No adjust.

Factory channel preset

No adjust.

Burn MAC

Press OK button from U disk write MAC.

Burn HDCP KEY

Press OK button from U disk write HDCP KEY.

Burn WIDI KEY

Press OK button from U disk write WIDI KEY.

Burn CI KEY

Press OK button from U disk write CI KEY.

Burn ALL(MAC HDCPKEY WDID CI KEY)

Press OK button from U disk write MAC ,HDCPKEY, WDID and CI KEY.

8 Panel Control

WHITE PATTERN

No adjust. For shipping condition, this item should be off.

SSC Setting

Press OK to set the appropriate EMC values.

6M30 SSC Setting

No adjust.

Gplus Mode

No adjust.

14

9 Others
Uart Enable

Press◄/► button to switch Uart Enable on or off.

Uart BUS

Press◄/► button to switch Uart BUS on or off.

Uart Msg Setting

No adjust.

Restore to Default

Press OK to execute factory reset.

AVD PAPAMETER

No adjust.

WDT

No adjust.

Mount Config

No adjust.

Customer Info

No adjust.

Unique Key Reencrypt

No adjust.

PIP/POP

No adjust.

PVR-Record All

No adjust.

SECURE WRITE

No adjust.

RAM Log

No adjust.

SW Information

No adjust.

Update Logo

No adjust.

Backup Date

No adjust.

Restore Date

No adjust.

10 Customer Setting
Gamma Table

No adjust.

11 CI Factory Setting

No adjust.

END.

15

MSD6488 Software Upgrade Instruction

Upgrade bin file

The file name of the upgrade bin is ‘MstarUpgrade.bin’ for USB upgrade.

USB upgrade procedures for TV set

16

1. Copy the software to the root directory of a USB memory stick. Plug the memory stick to

USB port of target TV set.

2. Select ‘Software Update(USB)’ on OSD and press OK button to start software update. TV

will reboot automatically when upgrade finishes.

3. If the process stop at 19% and TV reboot, it means the software of both TV set and USB

memory stick is the same.

Hotel Mode

Enter Hotel Mode: MENU+7906.

Enter

state:

Hotel Mode