Panasonic TH-42PZ700BA, TH-50PZ700B, TH-42PZ700B User Manual

Operating Instructions
Plasma Television
Model No.
TH-42PZ700BA TH-42PZ700B TH-50PZ700B TH-58PZ700B
INPUT
OPTION
SD CARD
EXIT
RETURN
U.K. Standard
TV
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Receive digital terrestrial broadcastings using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) / Register and instantly call up favourite programmes with Profile Edit (p. 29))
Sharp pictures with HDMI terminal Control DVD recorder / VCR via TV with Q-Link connection Create home theatre and Panasonic equipment link-ups with
“VIERA Link” without complicated settings! Support Audio Description signal
Audio description (AD) is an ancillary component associated with a broadcast which delivers a verbal description of the visual scene as an aid to understanding and enjoyment particularly for visually-impaired viewers.
(p. 12 and p. 22)
(p. 42)
(p. 40)
2
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TH-42PZ700BA Declaration of Conformity No 4824, 21 May 2007 TH-42PZ700B Declaration of Conformity No 4470, 15 January 2007 TH-50PZ700B Declaration of Conformity No 4469, 15 January 2007 TH-58PZ700B Declaration of Conformity No 4468, 15 January 2007
Contents
FULL HD
This TV uses a high definition plasma panel (1920 × 1080 pixels) to produce high definition pictures close to their original resolution.
V-real Pro 2
V-real Pro 2 technology is the collective name for original technologies developed by Panasonic to enhance total Full HD (1080p) image quality: V-real Pro 2 PROCESSOR: Enhance and output the incoming video signals as high-image-quality signals. The resulting video signals deliver the kind of high resolution that large screens require. V-real Pro 2 DRIVER: Precisely controls panel drive to optimise its performance. Achieves high image quality with the equivalent of high steps of gradation. V-real Pro 2 PANEL: Provide clear, vivid display of the video signal after processing by the V-real Pro 2 Processor and Driver. The high resolution of 1,920 × 1,080 pixels ensures beautiful images with clearer, sharper details.
High gradation
Gradation Steps
Gradation refers to the smoothness of colour expression. Rich, fine gradation is extremely important for maximising the high resolution panel. Uses maximum 16-bit signal processing to provide the equivalent of 4,096 steps of gradation.
Be Sure to Read
Safety Precautions ······································ 4
(Warning & Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Quick Start Guide
Accessories / Options Identifying Controls Basic Connection Auto Setup
Enjoy your TV!
Basic Features
Watching TV ·············································· 12
Using TV Guide ········································· 14
Watching VCR, DVD and Satellites ··········16
Viewing Teletext ········································18
······························ 10
·················· 8
········· 6
·············· 7
Viewing Advanced FAQs, etc.Quick Start Guide
Lead-free display
This reduces the impact on the environment when recycling or disposing of them in the future.
All VIERA plasma display panels are lead-free.
Advanced Features
How to Use Menu Functions ····················· 21
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 26
(pay-TV, software update)
Editing Channels ······································· 28
Tuning Channels ······································· 30
Restore Settings ······································· 32
Owner ID ··················································· 33
Input Labels ·············································· 34
Displaying PC Screen on TV ····················· 35
Recording Controls (DVB) ························ 36
Viewing from SD Card (Photos and Movies)
Q-Link Functions ······································· 40
HDMI Functions ·······································41
(HDMI terminal / VIERA Link)
External Equipment ··································· 44
FAQs, etc.
Technical Information ································46
FAQs ·························································50
On screen messages ································ 52
Specifications ············································ 54
Licence ······················································ 55
Index ························································· 55
··· 38
3
Safety Precautions
Warning & Caution
Handling the mains plug
Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time. Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)
Power source
This TV is designed to operate on 220-240 V, 50 / 60 Hz AC.
Do not remove the cover
Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
AC 220-240 V 50 / 60 Hz
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other sources of heat. To prevent fire never place any type of candle or naked flame on top or near the TV.
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp
(TH-42PZ700BA, TH-42PZ700B) / 10 amp (TH-50PZ700B, TH-58PZ700B) fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps (TH-42PZ700BA, TH-42PZ700B) / 10 amps (TH-50PZ700B, TH-58PZ700B) and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic Dealer.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
WARNING: – THIS APPARATUS MUST BE EARTHED. IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your mains plug, proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is
marked with the letter E or by the Earth symbol The wire which is coloured BLUE must be connected to the terminal in the mains plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the mains plug which is marked with the letter L or coloured RED. How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
ASA
or the BSI mark on the body of the fuse.
or coloured GREEN or GREEN-AND-YELLOW.
4
Do not expose to rain or excessive moisture
To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
Do not block the rear ventilation openings
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Allow sufficient space around the TV for radiated heat
Minimum distance
10
10
10
7
(cm)
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated stands / mounting equipment
Using an unauthorized stand or other fixtures may make the TV shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).
Do not allow children to handle SD card
As with a small object, SD card can be swallowed by young children. Please remove SD card immediately after use.
Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
Typical still images
Channel number and other logos Image displayed in 4:3 mode Video game Computer image
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 50)
Auto power standby function
If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode.
Keep the TV away from these equipment
Electronic equipment In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound). Equipment with an infrared sensor This TV also emits infrared rays (this may affect operation of
other equipment).
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially treated
and may be easily damaged. Do not tap or scratch the surface with your fingernail or other hard object. Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances (this may degrade surface quality).
Cabinet
Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Use care not to subject the TV’s surfaces to detergent.
(A liquid inside the TV could lead to product failure.) Use care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances (this may deteriorate the surface by peeling the paint). Do not allow the cabinet to make contact with a rubber or
PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
5
Accessories / Options
Standard accessories
Remote Control Transmitter
N2QAYB000114
TV
Operating Instructions Pan European Guarantee Card
Check that you have the accessories and items shown
Batteries for the Remote Control Transmitter
R6 (UM3)
Installing remote’s batteries
Pull open
1
Hook
Close
2
Clamper (2)
TMME258
(2)
1 Year Guarantee Registration CRM (Customer Relationship Management)
Mains Lead
K2CT3DH00018
(TH-42PZ700BA, TH-42PZ700B) K2CT3DH00025
(TH-50PZ700B, TH-58PZ700B)
Using the clamper
Rear of the TV
Snap open
Remove from the TV
Note the correct polarity (+ or -)
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in damage to the remote control. Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Optional accessories
Pedestal
TY-ST42D1-WG TY-ST42D1-WK TY-ST42D2-WG TY-ST42D2-WK
( TH-42PZ700BA, TH-42PZ700B)
TY-ST50D1-WG TY-ST50D1-WK TY-ST50D2-WG TY-ST50D2-WK
(TH-50PZ700B)
TY-ST58D2-WG TY-ST58D2-WK
(TH-58PZ700B)
Plasma TV stand
Snap shut
Do not bundle the RF cable and mains lead together (could cause
distorted image). Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to fix cables.
TY-S42PZ700W
( TH-42PZ700BA, TH-42PZ700B)
TY-S50PZ700W
( TH-50PZ700B)
TY-S58PZ700W
( TH-58PZ700B)
Wall-hanging bracket (vertical)
TY-WK42PV3W
(angle)
TY-WK42PR3W
TH-42PZ700BA
TH-42PZ700B TH-50PZ700B
Push both side hooks and pull out
)(
6
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets. Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over. Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
P
UL
L
Identifying Controls
SD CARD slot (p. 39)
Function select
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 30)
Lift door to open
Changes the input mode
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
Mains power On / Off switch
Power LED
Standby: red
On: green When using the remote control, indicates the TV has received a command.
Standby On / Off switch
(Switches TV On or Off standby)
Changes aspect ratio
Access VIERA Link Menu (p. 43) TV Guide (p. 14)
OK button to confirm selections and choices Press after selecting programme positions to quickly change programme.
Main Menu Press to access VIERA Link, Picture, Sound and Setup menus
Remote control signal receiver
C.A.T.S. (Contrast Automatic Tracking System) sensor
( senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 22)
DVB LED
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash) Timer Programming On :orange
(p. 13)
(p. 21)
Headphones jack
(p. 44)
INPUT
OPTION
SD CARD
EXIT
RETURN
AV4 terminals
(p. 44)
Changes the input mode TV -
switches DVB (digital broadcasting) / Analogue mode
AV - changes AV input mode (p. 16)
Viewing SD Card (p. 38)
Option menu Sets the selectable settings of viewing and sound options easily (p. 12)
EXIT (Returns to TV screen)
Cursor buttons to make selections and adjustments
Returns to the previous menu
HDMI3 terminal
(p. 44)
(p. 12)
Quick Start Guide
Identifying Controls
Accessories / Options
(p. 18)
(p. 12 and p. 19)
(p. 13)
Teletext
Subtitles Showing subtitles (p. 12)
Programme / channel change buttons (0-9) and Teletext page buttons. When in Standby mode, switches TV On.
Programme Information
Selects programmes in sequence
VCR / DVD operations (p. 17)
Multi window (p. 13)
Surround (p. 22)
Coloured buttons used for the selection, navigation and operation of various functions
Still picture (p. 13) Teletext Hold (p. 20)
Teletext Index (p. 20)
Sound mute On / Off
Volume
MULTI WINDOW DIRECT TV REC
DIRECT TV Recording
To immediately record programme in VCR / DVD recorder with Q-Link connection
(p. 40)
7
Basic Connection
External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Example 1 Connecting aerial
TV only TV, DVD Recorder or VCR
Aerial AerialRear of the TV Rear of the TV
AC 220-240 V 50 / 60 Hz
RF
Mains lead (supplied)
cable
Example 2 Connecting DVD Recorder / VCR
Mains lead (supplied)
AC 220-240 V 50 / 60 Hz
8
SCART cable (fully wired)
RF cable
RF IN
DVD Recorder or VCR
Note
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 40).
Connect to AV1 for a Satellite receiver.
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
SCART: RF: Radio Frequency - Signal received from terrestrial aerial. RGB / S-Video / Video:
VCR: Video Cassette Recorder DVD: Digital Versatile Disc
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
Choose between these three video formats depending on personal preference and equipment requirement. (RGB - Red, Green and Blue)
RF OUT
RF cable
Example 3 Connecting DVD Recorder / VCR and Sattelite receiver
TV, DVD Recorder / VCR and Satellite
Rear of the TV
Clamper
To unfasten
Mains lead (supplied)
Aerial
Quick Start Guide
RF cable
Basic Connection
AC 220-240 V 50 / 60 Hz
SCART cable
(fully wired)
SCART cable (fully wired)
RF cable
RF OUT
RF IN
DVD Recorder
or VCR
RF cable
SCART cable (fully wired)
RF OUT
RF IN
RF cable
RF IN
Satellite receiver
9
Auto Setup
Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
You can now use the remote
control to turn On the TV or turn the TV to standby mode. (Power LED: On)
INPUT
OPTION
SD CARD
EXIT
RETURN
2
Auto Setup - Digital and Analogue
Digital Scan 21 68 Analogue Scan 21 68
Channel Service Name Type Quality
62
CBBC Channel DVB 10 62 BBC Radio Wales DVB 10 62 BBC Radio Cymru DVB 10 62 E4 DVB 10 62 Cartoon Nwk DVB 10 29 Analogue 33 BBC1 Analogue
This will take about 3 mins.
EXIT
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
When inputting owner ID
Please enter new PIN
PIN
EXIT Change RETURN
* * * *
0 9
Page down
Page up
PIN entry
-
-
1 of 2Owner ID
Auto Setup will start to search for
TV channels and store them in the numbered order as specified by the broadcasters.
If a compatible recording equipment
with Q-Link or similar technologies (p. 40) is connected, analogue channel information is automatically downloaded to the equipment.
Following the on-screen operation guide, enter your own choice of PIN number, name, etc.
For detailed procedures
“Owner ID” (p. 33)
Make a note of the PIN number
in case you forget it.
10
When inputting owner ID later
EXIT
If you input the ID later
“Owner ID” (p. 33)
Select the picture setting
Viewing Mode
3
TV
Please select your preferred viewing mode.
Dynamic Normal Cinema Auto
Also possible to change the setting
in Picture Menu (p. 22)
Auto Setup is now complete and your TV is ready for viewing.
To check programme list
at-a-glance
TV Guide (p. 14)
To edit channels
Editing Channels (p. 28)
Analogue Programme Edit (p. 31)
select
set
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen
Quick Start Guide
Auto Setup
ON SCREEN HELP Instructions box
(example: Owner ID)
1 of 2Owner ID
Please enter new PIN
PIN
EXIT Change RETURN
On-screen operation guide will help you.
Note
If tuning has failed “Auto Setup” (p. 30).
If downloading has failed “Download” (p. 23).
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
* * * *
0 9
Page down
Page up
PIN entry
11
Watching TV
O
INPUT
OPTION
SD CARD
EXIT
RETURN
Volume
1
2
3
Turn power on
(Press for about 1 second)
Mains power On / Off switch should be On.
Select DVB (Digital Video Broadcasting) or Analogue
1 BBC ONE WALES
Corontation Street 20 : 00 ~ 20 : 55
Information banner
You can also select the mode using the TV button on the front panel
of the TV.
Now
Profile 1
23:35
Change category
For info press
Select a channel
up
or
down
MULTI WINDOW
Other useful functions (Operate after )
DIRECT TV REC
Turn the TV off automatically after a fixed period
Display the menu
Note
To watch pay-TV (p. 27)
Select “Setup”
VIERA Link
Off Timer
To cancel Set to “Off” or turn the TV off
To display the remaining time Information banner (p. 13)
When the remaining time is within 3 minutes, the remaining time will flash on screen.
Display subtitles
Display / hide subtitles (if available)
To change the language for DVB “Preferred Subtitles” (p. 23) (If available)
Check or change the current programme status instantly
To select the two or three-digit programme number, e.g. 39
To select programmes using TV Guide (p. 14)
Main Menu
Picture
Sound
Setup
(in a short time)
access
select
Select “Off Timer” and set the time
Setup Menu
DVB Timer Programming
DVB Profile Edit
DVB Service List
Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Power on Preference
Teletext FASTEXT
Off
TV
1/3
set
select
PTION
12
Display the current programme status
To change
Subtitle Language (DVB mode) Multi Audio (DVB mode) Possible if the programme has some languages of sounds NICAM (Analogue mode) Sound Menu (p. 22) Volume Correction Adjusts volume of individual channel or input mode Audio Description (DVB mode)
This function can aid visually-impaired viewers by adding an additional audio track to describe events on-screen. Select “On” if the programme has this signal, then you will hear the description sound
Note
Also possible to change the settings in Menu list (p. 22 and p. 23).
change
select
Possible if the programme has some languages of subtitles
Other useful functions (Operate after )
Hold
Display information banner
Freeze / unfreeze picture
Display programme information
Channel Current time Category
Programme DVB: Programme
Start / Finish time
Analogue: Programme
Status
Information of another channel
Information on next programme
(DVB)
To watch the programme listed in the banner
Information banner operation
1st press Display banner
“AD”, “Subtitles”, “TXT”, “Multi-Audio” indications are displayed
as available on particular channels or services, but may not be available for all individual programmes being broadcast.
Press the button twice to confirm availability of these functions.
1 BBC ONE WALES
Corontation Street 20 : 00 ~ 20 : 55
Mute Bad signal Encrypted
Sound mute
Weak TV signal
Scrambled broadcasting
2nd press Banner + programme synopsis (DVB)
23:35
Now
SubtitlesAD TXT Multi-Audio 45
Subtitle
Audio description
Teletext
Profile 1
Change category
For info press
Multiple audio
Off timer
To set display timeout
“Banner Display Timeout” (p. 23)
To hide
Appears also when changing channel.
3rd press Exit
To change the category Features available
EXIT
Example:
1 BBC ONE WALES
Corontation Street 20 : 00 ~ 20 : 55
Mute Bad Signal Encrypted
[AD]
23:35
Now
Subtitles TXT Multi-Audio 45
AD
All DVB Services
Change category
Exit info
blue
Change aspect ratio
Watch TV, DVD, etc. in multi window
Change the aspect ratio (p. 46)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
To change the mode
Display Aspect Selection list
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
During the list is displayed, select the mode
Store
Aspect Selection
Auto
16:9 14:9 4:3 Zoom1 Zoom2 Zoom3
Change
MULTI WINDOW
View in multi window (p. 47)
Enjoy viewing two images at once, such as a TV programme and a DVD.
Picture-in-Picture mode (PinP) Picture-and-Picture mode (PandP)
DVD
Exit PandP Swap
blue
AV1/RGB
Exit PandP Swap
AV1/RGB
DVD
Colour bar
yellow
green
Exit PinP Swap
Main screen
Remote control operations
apply to the main screen.
AV1/RGBDVD
Sub screen
Viewing
Select
EXIT
RETURN
Watching TV
Operations in multi window
To exit multi window (return to the single-screen view with main screen)
To change the layout, images, first show the colour bar
To change the layout
To swap
To exit multi window
To change the input mode or position of sub screen
Swap sub screen for main screen
blue
blue
green
red
yellow
Change the input mode or position by the remote control (p. 12 or p. 16)
MULTI WINDOW
Swap again
blue
13
Using TV Guide
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently broadcast and future broadcasts over the next seven days (depending on the broadcaster). Analogue broadcasts will be listed after DVB broadcasts. “D” means DVB channel and “A” means Analogue channel.
INPUT
OPTION
SD CARD
EXIT
RETURN
View TV Guide (landscape or portrait)
View “Portrait” to see one channel at a time View “Landscape” to see many channels
TV Guide date
TV Guide time
Channel
Landscape
(Displays by
broadcaster)
To change the layout
(Landscape / Portrait)
To previous day (DVB mode)
To next day (DVB mode)
TV Guide : Landscape
Wed 12th
20:00 - 20:30 DIY SOS : We open in the Battersbys
Time: 20:00 20:30 21:00 21:30
BBC ONE
1
D
7
D
BBC THR
14
D
E4 Emmerdal. Coronation Street The Bill
CBBC Cha
70
D
Cartoon Panorama Sex And The City Terminator
72
D
105
BBCi I’m A Celebrity Pop Idol News The
D
719
D Rugby 15 To 1 The Bill
BBC Radi
Change display mode
Timer Programming
Select channel
-24 Hr +24 Hr Prog.type Category
red
Programme (TV Guide start page)
19:30
Eastender DIY SOS The Bill Red Cap
Hot Wars Horiday Program
10 O’ clock News BBC Pepsi Char. Good bye Hello
EXIT Select programme Info RETURN
Current date and time
Wed 12/05/04 10:46
Prog. type
All Types
Prog. type
1 BBC ODD D D D7 BBC T 14 E4 70 CBBC 72 Cartoo
Select programme
Change display mode
Timer Programming
-24 Hr
EXIT Select channel RETURN
+24 Hr Prog.type Category
Category
All Services
So
Wed 12/05/04 10:46TV Guide Portrait
Page down
Portrait (Displays by time)
Page up
14
TV
To return to TV
EXIT
To view a
programme list of the selected type (DVB mode)
To view a
programme list of the selected category
green
yellow
blue
Prog. typ e
All T ype s
All T ype s
21:0 0 21:3 0
21:0 0 21:3 0
Movie s
Red Ca p
Red Ca p
New s
The Bil l
The Bil l
Entertainmen t
Good by e
Good by e
Spor t
T erminato r
T erminato r
Children’s
New s
New s
Educatio n
The Bil l
The Bil l
Lifestyl e
Dram a
All Service s
All Service s
All DVB Services
All Analogue Services
Free TV
Free TV
Pay TV
Pay TV
Radio
Radio
Information
Information
Profile 1
Profile 1
Profile 2
Profile 2
Profile 3
Profile 3
Profile 4
Profile 4
S o
S o
Hel l
Hel l
Th e
Th e
Categor y
Categor y
All Service s
All Service s
(Type list)
select type
view
(Category list)
Only analogue TV channels are listed
To list favourite channels (p. 29)
select category
view
Other useful functions (Operate after viewing TV Guide)
Watch the programme
View details of the programme (DVB mode)
Select the channel or programme now on the air
select
access
Select the programme
select
Select “View”
(DVB)
Eastender 19:30- 20:00
View
View details
TV Guide Wed 05/08/04 18:50
EXIT
RETURN
Return to List
Timer Programming
Select the programme to be broadcast
(Timer Programming screen)
select
DVB Timer Programming Wed 05/08/04 18:50
Pos. Name Date Start End min.
13BBC1
ITV1
6/8 FR
18:00
20:00
7/8 SA
12060Off
21:30
22:30
Timer Programming
select
access
Off
(TV screen)
To return to the start page
Details
DVB LED will turn on if Timer Programming is set.
Viewing
Timer programming to record (DVB mode)
set
To check / change / cancel a timer
programming event
“Timer Programming” (p. 36)
Edit timer
Select timer
EXIT
0 9
RETURN
Delete
Orange DVB LED
(Rapid blinking during recording)
To return to TV Guide
RETURN
DVB LED
Note
When recording programmes, you must make the proper settings on the external
recording equipment connected to the TV. If a compatible recording equipment with Q-Link or similar technologies is connected to the TV (p. 8) and the “Q-Link Settings” (p. 23) are completed, no setting of the equipment is required. Also read the manual of the recording equipment. If you select the programme now on the air, the confirmation screen whether watching or
recording will appear. Select “Timer Programming” to record from the time you finish the Timer Programming setting.
Note
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
Using TV Guide
15
Watching VCR, DVD and Satellites
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input. Connect the Satellite receiver and you can watch satellite broadcasts. To connect the equipment (p. 8 and p. 9) The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Turn the TV on
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts or
satellite receiver is switched on
Input signals are automatically identified by the SCART (pin 8)
terminal. This function is also available for HDMI connections (p. 43).
If input mode is not switched automatically
Perform and
Dependant on the setup of the equipment
INPUT
OPTION
1
SD CARD
EXIT
RETURN
MULTI WINDOW DIRECT TV REC
2
3
4
Display the Input select menu
Select the input mode connected to the equipment
Input Selection
AV1
AV2/AV2S
AV3/AV3S
AV4/AV4S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
You can also select the input using the AV button on the remote
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input modes “Input Labels” (p. 34)
View
Displays the selected mode
watch
select
16
To return to TV
Note
If the external equipment has an aspect adjustment function, set to “16:9”.
For details, see the manual of the equipment or ask your local dealer.
Screen display
Terminal
Manual input
default setting in
( )
“Input Labels”
Auto input EC mode or
(
VIERA Link
Panasonic equipment connected to the TV can be directly operated with the remote control.
)
AV1 AV2 AV3
AV1
AV1-RGB
EC/AV1
EC/AV1-RGB
AV2
AV2-S-Video
EC/AV2
EC/AV2-S-Video
AV3
AV3-S-Video
AV3-RGB
EC/AV3
EC/AV3-S-Video
EC/AV3-RGB
Component PC HDMI1 HDMI2 HDMI3
Component PC HDMI1 HDMI2 HDMI3
EC/HDMI1
Applicable for
EC mode and VIERA Link
EC/HDMI2
Applicable for
VIERA Link
EC/HDMI3
Applicable for
VIERA Link
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse DVD: Skip to the previous track or title Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward DVD: Skip to the next track or title Press and hold to search forward
Pause
Pause / Restart DVD: Press and hold to play at slow speed
Viewing
Watching VCR, DVD and Satellites
Programme Up / Down
Select programme
Record
Start recording
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position Press and hold during the following operations
Enter the appropriate code for the equipment to be controlled, see table below
“VCR” position
Equipment Code
VCR 10 (default) DVD 11
Note
Confirm correct operation after the code changed.
The codes will be reset to default values if batteries are replaced.
“DVD” means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
Press
71
17
Loading...
+ 39 hidden pages