Panasonic TH-42PY70FA, TH-42PY70F, TH-50PY70F User Manual

Operating Instructions

Plasma Television

English

Please read these instructions before operating your set and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Information on Disposal for Users of Waste Electrical & Electronic Equipment

Printed in Czech Republic

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic-europe.com

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identiﬁ cation in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Model No.

TH-42PY70FA TH-42PY70F TH-50PY70F

Licence

Trademark Credits

•

VGA is a trademark of International Business Machines Corporation.

•

Macintosh is a registered trademark of Apple Computer, USA.

•

S-VGA is a registered trademark of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

•

SDHC Logo is a trademark.

•

HDMI, the HDMI Logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

•

HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.

(private households)

This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative

effects waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

human health and the environment which could otherwise arise from inappropriate

INPUT

OPTION

SD CARD

EXIT

RETURN

F.P.

Viewing Advanced FAQs, etc.Quick Start Guide

Turn your own living room into a movie theatre!

Experience an amazing level of multi-

media excitement

Enjoy rich multi-media

Camcorder

Ampliﬁ er with Speaker system

VCR

DVD player

DVD Recorder

Personal

computer

Set top box

Contents

•

Safety Precautions ······································ 4

(Warning / Caution)

•

Notes ··························································· 5

•

Maintenance ··············································· 5

Be Sure to Read

Advanced Features

•

How to Use Menu Functions ····················· 20

(picture, sound quality, etc.)

•

Editing and Setting Channels

······················ 24

•

Control Channel Audience ························ 26

•

Restore Settings ······································ 27

•

Input Labels ·············································· 28

•

Displaying PC Screen on TV ·····················29

•

Viewing from SD Card (Photos) ················ 30

•

Q-Link Functions ······································· 32

•

HDMI Functions ·······································33

(HDMI terminal / VIERA Link)

•

External Equipment ··································· 36

Basic Features

•

Watching TV ·············································· 14

•

Watching Videos and DVDs ······················ 16

•

Viewing Teletext ········································18

Enjoy your TV!

•

Technical Information ································38

•

FAQs ·························································41

•

Speciﬁ cations ············································ 43

•

Licence ······················································ 44

FAQs, etc.

SD memory card

Accessories / Options

·········· 6

Installation of the pedestal

··· 7

Identifying Controls

··············· 9

Basic Connection

················· 10

Auto Setup

······························· 12

Quick Start Guide

4 5

Safety Precautions

Do not remove covers NEVER modify the TV yourself

(High-voltage components may cause serious electrical shock.)

Have the TV checked, adjusted, or repaired at your local Panasonic dealer.

Keep liquids away from the TV

To prevent damage which may result in ﬁ re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (ﬂ ower vase, cups, cosmetics, etc.) above the TV. (including on shelves above, etc.)

Do not place foreign objects inside the TV

Do not let metal or ﬂ ammable objects drop into the TV through the air vents (ﬁ re or electrical shock may result).

( Cleaning an energized TV may cause electrical shock.)

When cleaning the TV, remove the

mains plug

Warning Caution

Do not expose to direct sunlight and other sources of heat

Avoid exposing the TV to direct sunlight and other sources of heat. To prevent ﬁ re never place any type of candle or naked ﬂ ame on top or near the TV.

Blocked ventilation by curtains, etc. may cause overheating, ﬁ re or electrical shock.

Do not block the rear air vents

Notes

Maintenance

Display panel

Cabinet

Mains plug

Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to ﬁ re or electrical shock.)

First, remove the mains plug from the socket outlet.

Caution

•

The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your ﬁ ngernail or other hard object.

•

Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).

Caution

•

Use care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure.)

•

Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).

•

Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.

When TV will not be used for a

long time, remove the mains plug

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

Do not allow children to handle SD card

As with a small object, SD card can be swallowed by young children. Please remove SD card immediately after use.

Do not place the TV on sloped or unstable surfaces

The TV may fall off or tip over.

Use only the dedicated stands / mounting equipment

Using an unauthorized stand or other ﬁ xtures may make the TV shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).

If you ﬁ nd any abnormality, remove the mains plug immediately!

AC 220-240 V 50 / 60 Hz

Handling the mains plug and lead

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause ﬁ re.) Ensure that the mains plug is easily accessible. Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not touch the mains plug with a wet hand. (This may cause electrical shock.) Do not use any mains lead other than that provided with this TV. (This may cause ﬁ re or electrical shock.) Do not damage the mains lead. (A damaged lead may cause ﬁ re or electrical shock.)

Do not move the TV with the lead plugged in the socket outlet. Do not place a heavy object on the lead or place the lead near a high-temperature object. Do not twist the lead, bend it excessively, or stretch it. Do not pull on the lead. Hold onto the mains plug body when disconnecting lead. Do not use a damaged mains plug or socket outlet.

Electronic equipment In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound).

Equipment with an infrared sensor This TV also emits infrared rays (this may affect

operation of other equipment).

Keep the TV away from these equipment

If no signal is received and no operation is performed in TV mode for 30 minutes, the TV will automatically go to standby mode.

Auto power standby function

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.

To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 41)

Typical still images

Channel number and other logos Image displayed in 4:3 mode Video game Computer image

Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.

Transport only in upright position

Allow sufﬁ cient space around the

TV for radiated heat

(cm)

Minimum distance

Quick Start Guide

Assembly screw (4)

Assembly screw (4) Pole (2) Base

M5 × 16

M5 × 30

Use the four assembly screws to fasten the left and right poles to the base securely.

Front

Pole

( )

Pole

Front

Align the stamped marks. Align the stamped marks.

Pole

( )

Pole

Use the assembly screws to fasten securely.

•

Carry out work on a horizontal and level surface.

Band (2)

Accessories / Options

Batteries for the Remote Control Transmitter

(2)

•

R6 (UM3)

Remote Control Transmitter

•

N2QAYB000182

Standard accessories

Check that you have the accessories and items shown

Operating Instructions

Pan European Guarantee Card

Installing remote’s batteries

Pull open

Hook

Note the correct polarity (+ or -)

Caution

•

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such as alkaline and manganese batteries).

•

Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or breakup batteries.

Clamper (2)

Mains Lead

Using the clamper

•

Do not bundle the RF cable and mains lead together (could cause distorted image).

•

Fix cables with clampers as necessary.

•

When using the optional accessory, follow the option’s assembly manual to ﬁ x cables.

•

How to ﬁ x cables when using the pedestal (standard accessory)

“Attaching the bands for ﬁ xing cables” (p. 8)

Snap open

Snap shut

Remove from the TV

Push both side hooks and pull out

Pedestal (ST-42D2-WG / ST-50D2-WG)

•

TBL0E0009 (TH-42PY70FA, TH-42PY70F)

•

TBL0E0008 (TH-50PY70F)

For installation p. 7 and p. 8

Caution

•

In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets.

•

Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.

•

Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.

Optional accessories

Wall-hanging bracket (vertical)

TY-WK42PV3W

(angle)

TY-WK42PR2W TY-WK42PR3W

Rear of the TV

•

Installation of the pedestal

•

Accessories / Options

■

Securing the TV

Label

View from the bottom

Arrow mark

Hole for pedestal installation

■

Assembling the pedestal

Caution

Do not use any other TV and displays.

•

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

•

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

•

If sufﬁ cient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Use the accessory fall-prevention brackets to secure the TV.

•

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.

Two or more people are required to install and remove the TV.

•

If two or more people are not present, the TV may be dropped, and personal injury may result.

Do not disassemble or modify the pedestal.

•

Otherwise the TV may fall over and become damaged, and personal injury may result.

Warning

Installation of the pedestal

Note

•

Maintenance Wipe the surfaces with a soft, dry cloth. If the pedestal is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and then wipe with a dry cloth.

Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating.

(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

•

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products or the like. (Doing so will cause deterioration.)

•

Forcing the assembly screws the wrong way will strip the threads.

Attaching the pedestal

Quick Start Guide

OPTION

SD CARD

EXIT

ASPECT

RETURN

INPUT

DIRECT TV REC

F.P.

S-V

AV3

Insert the spigot on the two bands into the pedestal.

Keep the knob

pressed

Cursor buttons to make selections and adjustments

Standby On / Off switch

(Switches TV On or Off standby)

Sound mute On / Off

Surround (p. 22)

Selects programmes in sequence

Teletext

(p. 18)

OK button to conﬁ rm selections and choices Press after selecting programme positions to quickly change programme.

VCR / DVD operations (p. 17)

Volume

Programme Information

(p. 15)

Teletext Index (p. 19)

Coloured buttons used for the selection, navigation and operation of various functions

EXIT

(Returns to TV screen)

DIRECT TV Recording

To immediately record programme in VCR / DVD recorder with Q-Link connection

(p. 32)

Programme / channel change buttons (0-9) and Teletext page buttons.

(p. 14 and p. 18)

When in Standby mode, switches TV On.

Access VIERA Link Menu (p. 35) Changes aspect ratio (p. 15)

Option menu Sets the preferred settings of viewing and sound options easily

(p. 15)

Main Menu Press to access VIERA Link, Picture, Sound and Setup menus (p. 20)

Viewing a favourite teletext channel (p. 19)

Changes the input mode TV -

changes TV mode

(p. 16)

AV - changes AV input mode (p. 16)

Viewing SD Card (p. 30)

Returns to the previous menu

Still picture (p. 15) Teletext Hold (p. 19)

Remove the screws at both top corners on the rear of the TV, and attach the clamps to the TV using the removed screws.

Band (2) Screw (2)

Nominal diameter 4 mm × 12

Wood screw (2) Clamp (2)

Installation of the pedestal

■

Securing to a base

Fix pedestal and base together with band.

■

Securing to a wall

Fix to wall or post with strong commercial wire or chain.

Remove

Attach

■

Attaching the bands for fixing cables

To tighten:

To loosen:

Preventing the TV from falling over

The TV could fall over during an earthquake, etc. We recommend that measures are taken to prevent the TV from falling over in such an event.

•

The information in this section is designed to reduce the risk of injuries caused by the TV falling over during an earthquake, etc.

However, no measure can guarantee protection against all earthquakes.

•

The precautions in this section are recommendations for providing more secure installation of your TV if you live in an earthquake prone area.

•

Identifying Controls

•

Installation of the pedestal

Identifying Controls

Power LED

•

Standby: red On: green

Swing door to open

Mains power On / Off switch

Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.

Changes the input mode

Function select

•

Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 24)

Headphones jack (p. 36)

AV3 terminals (p. 36)

SD CARD slot (p. 31)

C.A.T.S. (Contrast Automatic Tracking System) sensor

( senses brightness to adjust picture quality in

“Auto” Mode in Picture Menu) (p. 22)

Remote control signal receiver

Quick Start Guide

Basic Connection

Note

•

Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 32).

External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet ﬁ rst.

Example 1 Connecting aerial

Example 2 Connecting DVD Recorder / VCR

Example 3 Connecting DVD Recorder / VCR and Set top box

Mains lead (supplied)

SCART cable (fully wired)

DVD Recorder or VCR

RF cable

Aerial AerialRear of the TV Rear of the TV

RF cable

TV only TV, DVD Recorder or VCR

AC 220-240 V 50 / 60 Hz

DVD Recorder

or VCR

RF cable

Aerial

Rear of the TV

Set top box

AC 220-240 V 50 / 60 Hz

RF cable

TV, DVD Recorder / VCR and Set top box

SCART cable (fully wired)

RF cable

Clamper

•

To unfasten

•

Basic Connection

SCART cable

(fully wired)

SCART cable (fully wired)

Mains lead (supplied)

COMPONENT

VIDEO

AV 1 AV 2

COMPONENT

VIDEO

AV 1 AV 2

HDMI 1 HDMI 2

AV 1 AV 2

COMPONENT

VIDEO

HDMI 1 HDMI 2

VIDEO

RGB

VIDEO

RGB

VIDEO

S VIDEO

AUDIO AUDIO

AUDIO

RGB

AUDIO AUDIO

RGB

VIDEO

S VIDEO

AUDIO

RGB

VIDEO

RGB

VIDEO

S VIDEO

AUDIO AUDIO

AUDIO

RF OUT

RF IN

RF OUT

RF IN

Quick Start Guide

Country

Portugal

Spain

Italy

France

Austria

Germany

Netherlands

Hungary

Czech

E.Eu

Ireland

Poland

Switzerland

Belgium

Finland

Norway

Sweden

Denmark

Greece

Menüsprache

Slovenčina

čeština

Еλληνικά

Italiano

Français

English

Srpski

Deutsch

Português

Türkçe

Suomi

Polski

Românǎ

Hrvatski

Nederlands

Slovenščina

Български

Magyar

Svenska

Dansk

Norsk

Español

Plug the TV into mains socket and switch On

(Takes a few seconds to be displayed)

(example: Sound Menu)

On-screen operation guide will help you.

Auto Setup

Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer.

Auto Setup is now complete and your TV is ready for viewing.

•

You can now use the remote control to turn On the TV or turn the TV to standby mode. (Power LED: On)

•

To edit channels

Editing and Setting Channels

(p. 24)

■

ON SCREEN HELP Instructions box

Open the main menu

Return to the previous menu

Move the cursor / select the menu

Move the cursor / adjust levels / select from a range of options

Access the menu / store settings after adjustments have been made or options have been set

Many features available on this TV can be accessed via the On Screen Display menu.

Note

•

If tuning has failed “Auto Setup” (p. 24).

•

If downloading has failed “Download” (p. 23).

•

If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.

■

How to use remote control

•

Auto Setup

Using the On Screen Displays

Exit the menu system and return to the normal viewing screen

Select your country

select

Start Auto Setup

•

If a compatible recording equipment with Q-Link or similar technologies (p. 32) is connected, channel information is automatically downloaded to the equipment.

•

Auto Setup will start to search for TV channels and store them.

The sorted programme order

depends upon the TV signal, the broadcasting system and reception conditions.

Select the language

select

store

•

Also possible to change the setting in Picture Menu (p. 22)

Select the picture setting

select

set

INPUT

OPTION

SD CARD

EXIT

RETURN

Auto Setup

Scan 214178

Channel Service Name

CH 29 CH 33

This will take about 3 mins.

EXIT

RETURN

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

RETURN

EXIT

Sound Menu

Mode Music

Bass Treble Balance Headphone Volume Surround Off Volume Correction MPX Stereo Reset to Default Set

Select

EXIT Change RETURN

Viewing Mode

Dynamic Normal Cinema Auto

+ 15 hidden pages