PANASONIC TH-37PX80B, TH-42PX80B User Manual

Operating Instructions
Plasma Television
Model No.
TH-37PX80B TH-42PX80B
Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.
U.K. Standard
English
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Receives digital terrestrial broadcastings using an integrated DVB (Digital Video
Broadcasting) tuner
Display DVB programmes with TV Guide (p. 20) / Timer Programming (p. 40) / Register and instantly call up favourite programmes with Profi le Edit (p. 32)
Sharp pictures with HDMI connection
Enjoy high-defi nition digital picture and high-quality sound by using an HDMI cable (p. 52)
Links up and controls the connected equipment with “Q-Link” and “VIERA Link”
Easy recording and playback, create home theatre without complicated settings, etc. (p. 44)
Supports Audio Description signal (p. 15 and p. 26)
This function can add an additional audio track to describe events on-screen and aids understanding and enjoyment, particularly for visually-impaired viewers.
Digital Switchover
Starting in late 2007 and ending in 2012, TV services in the UK will go completely digital, TV region by TV region.
If you have any questions, please call Digital UK on or visit
Digital Switchover will cover a period of several weeks. When it starts you will lose all Analogue TV programmes and some Digital TV programmes will be missing. You will need to retune your TV each time this happens to recover your digital programmes.
Cable or Satellite users should still retune the TV to continue to receive Freeview services via their aerial. (Your Analogue programme for viewing Cable or Satellite services will change to a new position.)
Due to the digital reception technologies involved, quality of the DTV signals may be relatively low in some cases,
despite good reception of analogue programmes.
www.digitaluk.co.uk
To retune your TV “Auto Setup” in “Tuning Menu” (p. 35)
08456 50 50 50
HD ready
High De nition signals are supported by
HDMI and Component Video inputs.
100Hz Double Scan
100Hz Double Scan is a function of this TV that reduces large area fl icker.
Contents
Be Sure to Read
Safety Precautions ······································4
(Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Quick Start Guide
Quick Start Guide
15,000:1 Native Contrast
A wide contrast ratio will deliver pictures with
a deep black level and a brighter white level for greater image depth.
24p Playback
Can support 1080p, 24 frames per second
source materials.
0.001 msec Panel Response Time
Extremely fast response time to minimise
picture lag.
V-Audio
Utilises Panasonic’s advanced Digital
Amplifi cation technology.
Lead-free display
The Plasma display panel used in the 2008
All VIERA plasma display panels are lead-free. environment when recycling or disposing of them in the future.
Up to 100,000 hours Plasma Panel Lifetime
VIERA TV range is rated for up to 100,000 hours.
This measurement is based on the time taken for the brightness of the panel to reduce to half of it’s maximum level. The time taken to reach this level may vary depending on the image content and the environment where the TV is used. Image retention and malfunctions are not taken into account.
This reduces the impact on the
Accessories / Options ········· 6
Identifying Controls ·············· 8
Basic Connection ················ 10
Auto Setup ······························ 12
Enjoy your TV!
Basic Features
Watching TV ·············································· 14
Viewing Teletext ········································17
Using TV Guide ·········································20
Watching VCR, DVD and Satellites ··········22
Advanced Features
How to Use Menu Functions ·····················24
(picture, sound quality, etc.)
DVB Settings (DVB) ··································30
(pay-TV, software update)
Editing Programmes ································· 32
Tuning Programmes ·································· 34
Restore Settings ······································· 36
Owner ID ···················································37
Input Labels ·············································· 38
Displaying PC Screen on TV ····················· 39
Recording Controls ···································40
Viewing from SD Card (Photos) ················42
Link Functions ··········································44
(Q-Link / VIERA Link)
External Equipment ··································· 50
Viewing Advanced FAQs, etc.
FAQs, etc.
Technical Information ································ 52
FAQs ·························································55
On screen messages ································ 57
Glossary ···················································· 58
Index ························································· 58
Licence ······················································ 59
Specifi cations ············································ 59
Safety Precautions
Warning & Caution
Handling the mains plug and lead
Ensure that the mains plug is easily accessible at
all times. The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time. Ensure the earth pin on the mains plug is securely
connected to prevent electrical shock.
An apparatus with CLASS I construction shall
be connected to a mains socket outlet with a protective earthing connection.
Do not use any mains lead other than that
provided with this TV. (This may cause fi re or electrical shock.)
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any type of candle or naked fl ame on top or near the TV.
Power source
This TV is designed to operate on 220-240 V,
50 / 60 Hz AC.
Do not remove the cover
Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts inside.
Do not expose your ears to excessive volume from the headphones
Irreversible damage can be caused.
AC 220-240 V 50 / 60 Hz
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fi tted in this
mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark
If the mains plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic dealer.
Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this TV. The supplied mains lead and moulded plug are designed to be used with this TV to avoid interference and for your safety. If the socket outlet in your home is not suitable, get it changed by a qualifi ed electrician. If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.
WARNING: – THIS TV MUST BE EARTHED.
How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
or the BSI mark on the body of the fuse.
ASA
Do not expose to rain or excessive moisture
To prevent damage which might result
in electric shock or fi re, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects lled with liquid, such as vases, must not be placed on top of or above the TV.
Do not block the rear ventilation openings
Ventilation should not be impeded by
covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
Typical still images
Programme number and other logos
Image displayed in 4:3 mode
Video game
Computer image
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 55)
Auto power standby function
If no signal is received and no operation is performed in
Analogue TV mode for 30 minutes, the TV will automatically go to standby mode.
Keep the TV away from these types of equipment
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound). Equipment with an infrared sensor
This TV also emits infrared rays (this may affect operation of
other equipment).
Allow suffi cient space around the TV for radiated heat
Minimum distance
10
10
When using the pedestal, keep the
space between the bottom of the TV and the fl oor surface. In case of using Wall-hanging bracket,
follow the manual of it.
10 7
(cm)
Use only the dedicated pedestals / mounting equipment
Using an unapproved pedestal or other
xtures may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use approved pedestals / mounts
(p. 6).
Do not allow children to handle SD Card
As with a small object, SD Card can be
swallowed by young children. Please remove SD Card immediately after use.
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially treated and
may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object. Take care not to subject the surface to insect repellent, solvent,
thinner, or other volatile substances (this may degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.) Take care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances (this may deteriorate the surface by peeling the paint). Do not allow the cabinet and pedestal to make contact with a
rubber or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
Accessories / Options
Standard accessories
Remote Control
N2QAYB000239
TV
Operating Instructions
Pan European Guarantee Card
1 Year Guarantee Registration
CRM (Customer Relationship Management)
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Optional accessories
Wall-hanging bracket (vertical)
TY-WK42PV3W
TY-WK42PV4W
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets. Carefully read the instructions accompanying the pedestal, and be absolutely sure to take steps to prevent
the TV from tipping over. Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
damage.
Check that you have the accessories and items shown
Batteries for the
Remote Control (2)
R6 (UM3)
Clamper (2)
TMME289
p. 8
Cleaning cloth
TXFPE01RLTB
Some items may not be available locally.
(angle)
TY-WK42PR3W
TY-WK42PR4W
Mains Lead
K2CT3DH00018
p. 11
Pedestal (ST-42R4-WG)
TBLX0053
TXFBL01RSTD
p. 7
Installing remote’s batteries
1
Hook
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
Pull open
2
Note the correct polarity (+ or -)
Close
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insuffi cient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Quick Start Guide
Assembly screw (4)
(silver)
M5 × 18 M5 × 25
Assembly screw (4)
(black)
Assembling the pedestal
Use the four assembly screws to fasten the left and right poles to the base securely.
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will
strip the threads. “L” or “R” mark is stamped on the bottom of the pole.
Securing the TV
Use the assembly screws to fasten securely.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
Pole (2) Base
L
R
D
B
R
A
Accessories / Options
L
Front
View from the bottom
Hole for pedestal installation
Arrow mark
D
P
U
LL
Accessories / Options
Using the clamper
Rear of the TV
Do not bundle the RF cable and mains
lead together (could cause distorted image). Fix cables with clampers as necessary.
When using the optional accessory,
follow the option’s assembly manual to x cables.
Attach the clamper Bundle the cables
hole
Insert the clamper in a hole
To remove from the TV:
Keep
snaps
pushing both side snaps
Set the
tip in the hooks
To loosen:
knobhooks
Identifying Controls
TV
Function select
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 34)
Lift door to open
AV3
Keep
pushing the knob
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
Mains power On / Off switch
Switch On to turn on the TV
or turn the TV to standby mode by the remote control
Changes the input mode
Timer LED
Active for Timer Programming or Standby for Direct TV Recording :orange (fl ash)
Timer Programming On :orange
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality in “Eco” mode in Picture Menu (p. 26)
Remote control signal receiver
Power LED
Standby: red
On: green When using the remote control, indicates the TV has received a command.
Headphones jack
(p. 50)
AV3 terminals
(p. 50)
SD Card slot
(p. 43)
Identifying Controls
Remote Control
Standby On / Off switch
Switches TV On or Off standby
Aspect (p. 16)
Changes aspect ratio from
Aspect Selection list
Also possible by pressing this button
repeatedly until you reach the desired aspect
VIERA Link Menu (p. 47)
Press to access VIERA Link Menu directly
Guide (p. 20)
Displays TV Guide
OK
Confi rms selections and choices
Press after selecting programme positions to
quickly change programme
Main Menu (p. 24)
Press to access VIERA Link, Picture,
Sound and Setup Menus
Teletext (p. 17)
Switches to teletext mode
Subtitles (p. 14)
Displays subtitles
Numeric buttons
Changes programme and teletext pages
When in Standby mode, switches TV On
Programme Information (p. 15)
Displays programme information
Programme Up / Down
Selects programme in sequence
INPUT
OPTION
SD CARD
EXIT
RETURN
Input mode selection
TV -
switches DVB / Analogue mode (p. 14)
AV - switches to AV input mode from Input
Selection list (p. 22)
SD Card (p. 42)
Switches to SD Card viewing mode
Option Menu (p. 15)
Easy setting for viewing and sound
options
Exit
Returns to the normal viewing screen
Cursor buttons
Makes selections and adjustments
Return
Returns to the previous menu
Coloured buttons
Used for the selection, navigation and
operation of various functions
Hold
Freeze / unfreeze picture (p. 14)
Holds the current teletext page (teletext
mode) (p. 19)
Index (p. 19)
Returns to the teletext index page
(teletext mode)
Sound Mute
Switches sound mute On or Off
Volume Up / Down
Quick Start Guide
Identifying Controls
Accessories / Options
VCR / DVD Panasonic equipment operations (p. 23)
Normalize (p. 25)
Resets picture and sound settings to their
default levels
MULTI WINDOW
Direct TV Recording (p. 45 and p. 47)
Records programme immediately in
DVD Recorder / VCR with Q-Link or VIERA Link connection
DIRECT TV REC
N
Surround (p. 26)
Switches Surround On or Off
Basic Connection
External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet fi rst.
Example 1 Connecting aerial
Example 2 Connecting DVD Recorder / VCR
TV only TV, DVD Recorder or VCR
Aerial AerialRear of the TV Rear of the TV
AC 220-240 V 50 / 60 Hz
Mains lead (supplied)
RF cable
Mains lead (supplied)
AC 220-240 V 50 / 60 Hz
HDMI 1
HDMI 3
HDMI 2
AUDIO
OUT
COMPONENT
AUDIO
IN
LRL
R
AV2 PCAV1
RGB
RGB
VIDEO
VIDEO
S VIDEO
Y
PB
P
R
HDMI 1
HDMI 3
HDMI 2
AUDIO
OUT
COMPONENT
AUDIO
IN
LRL
R
AV2 PCAV 1
RGB
RGB
VIDEO
VIDEO
S VIDEO
Y
PB
P
R
RF cable
SCART cable (fully wired)
RF OUT
DVD Recorder or VCR
RF IN
RF cable
Note
Connect to AV2 for a DVD Recorder / VCR supporting Q-Link (p. 45).
Connect to AV1 for a Satellite receiver.
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using
HDMI cable (p. 50). Q-Link connection p. 44
VIERA Link connection p. 44
Read the manual of the equipment too.
10
Example 3 Connecting DVD Recorder / VCR and Satellite receiver
TV, DVD Recorder / VCR and Satellite
Rear of the TV
Quick Start Guide
Aerial
HDMI 1
HDMI 3
HDMI 2
AUDIO
OUT
COMPONENT
AUDIO
IN
LRL
R
Push until both side tabs click
Make sure that the mains lead is securely fi xed.
To remove from the TV:
Press both tabs and pull on mains connector to release
AC 220-240 V 50 / 60 Hz
Basic Connection
tabs
Mains lead (supplied)
RF cable
AV2 PCAV 1
RGB
RGB
VIDEO
VIDEO
S VIDEO
Y
PB
P
R
Fully wired HDMI compliant cable
SCART cable (fully wired)
DVD Recorder
or VCR
SCART cable (fully wired)
Satellite receiver
RF OUT
RF IN
RF OUT
RF IN
RF cable
RF cable
11
Auto Setup
Search and store TV programmes automatically. These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
You can now use the remote
control to turn On the TV or turn the TV to standby mode. (Power LED: On)
INPUT
OPTION
SD CARD
EXIT
RETURN
2
Auto Setup - Digital and Analogue
Digital Scan 21 68 Analogue Scan
This will take about 6 minutes.
Channel Service Name Type Quality
62
CBBC Channel Free TV 10 62 BBC Radio Wales Free TV 10 62 E4 Free TV 10 62 Cartoon Nwk Free TV 10 29 Analogue 33
BBC1 Analogue
Free TV: 4 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2
EXIT
Sending Preset Data
Please wait!
0% 100%
Remote control unavailable
21 68
-
Searching
-
When inputting Owner ID
Owner ID
Please enter new PIN
PIN
EXIT
RETURN
0 9
* * * *
PIN entry
Auto Setup will start to search for
TV programmes and store them in the numbered order as specifi ed by the broadcasters.
If Q-Link, or similar technology
(p. 45), compatible recorder is connected, analogue programme information is automatically downloaded to the recorder. (Digital programme information is not downloaded.)
Following the on-screen operation guide, enter your own choice of PIN number, name, etc.
For detailed procedures
“Owner ID” (p. 37)
Make a note of the PIN number
in case you forget it.
12
When inputting Owner ID later
EXIT
Select the picture setting
3
TV
Please select your viewing environment.
Auto Setup is now complete and your TV is ready for viewing.
Home Shop
“Shop” and “Home” are equal to “Dynamic” and “Normal” respectively - “Viewing Mode” in “Picture Menu” (p. 26)
If you input the ID later
“Owner ID” (p. 37)
select
set
To check programme list
at-a-glance
“Using TV Guide” (p. 20)
To edit programmes
“Editing Programmes” (p. 32)
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
Using the On Screen Displays
MENU
RETURN
EXIT
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal viewing screen
ON SCREEN HELP Instructions box
(example: Owner ID)
Owner ID
Please enter new PIN
PIN
* * * *
Quick Start Guide
Auto Setup
EXIT
RETURN
On-screen operation guide will help you.
Note
If tuning has failed “Auto Setup” (p. 35)
If downloading has failed “Q-Link Download” (p. 27)
To initialize all settings “Shipping Condition” (p. 36)
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
0 9
PIN entry
13
Watching TV
Turn power on
(Press for about 1 second)
INPUT
OPTION
SD CARD
EXIT
RETURN
1
2
Mains power On / Off switch should be On. (p. 8)
Select DVB (Digital Video Broadcasting) or Analogue mode
Also possible to select the mode using the
TV button on the front panel of the TV. (p. 8)
TV
Note
To watch pay-TV
p. 31
DIRECT TV REC
Volume
3
1 BBC ONE WALES
Coronation Street 20 : 00 ~ 20 : 55
Now
Profile 1
23:35
Change category
For info press
Information banner appears whenever you select a programme
For details p. 15
Select a programme
up
or
down
To select the two or three-digit
programme number, e.g. 39
(in a short time)
Select a programme using Information banner (p. 15)
Possible to confi rm the programme name before selecting programmes.
Display Information banner
if it is not displayed
Possible to set display
timeout in “Banner Display Timeout” (p. 27).
While the banner is displayed, select the programme
select programme
watch
Select a programme using TV Guide (p. 20)
Possible to confi rm the TV Guide (EPG) before selecting programmes.
Display
TV Guide
GUIDE
Select the event now on the air
select
Select “View”
Eastender 19:30- 20:00
View
Timer Programming
14
Other useful functions
Hold
Display subtitles
Freeze / unfreeze picture
Display / hide subtitles (if available)
To change the language for DVB (if available)
“Preferred Subtitles” (p. 27)
access
select
watch
Other useful functions
O
Display Information banner
Also appears when changing a programme
Features available / Message meanings
ProgrammeEvent
Example:
1 BBC ONE WALES
Coronation Street 20 : 00 ~ 20 : 55
Mute Encrypted
DVB: Event Start / Finish time Analogue: Programme status
Programme type (if it is Radio or Data service)
Now
Current time Category
23:35Radio
Change category
For info press
SubtitlesAD TXT Multi Audio 45
Profile 1
Display Information banner
Mute
Sound mute On
Bad signal
Poor TV signal quality
Encrypted
Scrambled programme
AD
Audio Description service available
This function can aid visually-impaired
viewers by adding an additional audio track to describe events on-screen. For settings p. 26
To confi rm another tuned
programme name
To change the category
Information on the next event
(DVB mode)
Extra information (press again to hide the banner)
(DVB mode)
“AD”, “Subtitles”, “TXT”, “Multi Audio” indications are
displayed as available on particular programmes, but may not be available for all individual programmes being broadcast.
Display the extra information to confi rm availability of these
functions.
blue
Subtitles
Subtitle service available
TXT
Teletext service available
Multi Audio
Multiple audio available
Stereo, Mono
Audio mode
1 - 90
Off Timer remaining time
For settings p. 16
To watch the programme
listed in the banner
To hide
To set display timeout
“Banner Display Timeout” (p. 27)
EXIT
Example:
1 BBC ONE WALES
Coronation Street 20 : 00 ~ 20 : 55
[AD]
Viewing
All DVB Services
23:35
Change category
Now
AD
Exit info
Watching TV
Check or change the current
PTION
programme status instantly
Display the selectable settings for the current programme
Multi Audio (DVB mode)
Allows you to select between alternative language for sound tracks (if available)
Subtitle Language (DVB mode) Allows you to select the language in which subtitles should appear (if available)
NICAM (Analogue mode)
Sound Menu (p. 26)
Note
Also possible to change the settings in Menu list (p. 26 and p. 27).
Volume Correction
Adjusts volume of individual programme or input mode
Audio Description (DVB mode) Select “On” if the programme has Audio Description service, then you will hear an additional audio track to describe events on-screen
To change
change
select
15
Watching TV
Other useful functions
Turn the TV off automatically after a fi xed period
Off Timer
Display the menu
MENU
To cancel Set to “Off” or turn the TV off.
To display the remaining time Information banner (p. 15)
When the remaining time is within 3 minutes, the remaining time will fl ash on screen.
Select “Setup”
Main Menu
VIERA Link
Picture
Sound
Setup
access
select
Select “Off Timer” and set the time
Setup Menu
Timer Programming
DVB Profile Edit
DVB Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference TV
Off
1/3
set
select
Change aspect ratio
Change the aspect ratio
Enjoy viewing the picture at its optimum size and aspect.
Display Aspect Selection list
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
Auto 16:9
14:9 4:3
Zoom1 Zoom2
While the list is displayed, select the mode
store
select
The best ratio is chosen and the picture expanded to fi ll the screen. For details p. 52
Displays the image at the standard “14:9” without distortion.
Displays a “16:9” letterbox or “4:3” image without distortion.
Aspect Selection
Auto
16:9 14:9 4:3 Zoom1 Zoom2 Zoom3
Select
EXIT
Change
RETURN
Aspect Selection list
Directly displays the image at “16:9” without distortion (anamorphic).
Displays the image at the standard “4:3” without distortion.
Displays a “16:9” letterbox (anamorphic) image full-screen without distortion.
16
Zoom3
Displays a “2.35:1” letterbox (anamorphic) image full-screen without distortion. At “16:9”, displays the image at its maximum (with slight enlargement).
Note
Only “16:9” and “4:3” are available in PC mode.
Not available when Subtitle is active in DVB mode.
Not available in Analogue teletext mode.
Aspect mode can be memorized separately for SD (Standard defi nition) and HD (High
defi nition) signals.
Viewing Teletext
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
DVB mode
DVB teletext services
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB teletext service, the images you see can contain graphics and text, laid out and controlled in a manner decided by the broadcaster.
You can check if the programme
has teletext service.
INPUT
OPTION
SD CARD
EXIT
RETURN
1
2
3
If in Analogue mode
Select DVB
Information banner (p. 15)
1 BBC ONE WALES
Coronation Street 20 : 00 ~ 20 : 55
Displayed if programme has teletext service
Now
23:35
Change category
For info press
TXT
Profile 1
Switch to Teletext
17:51 28 Feb
How to use
In all cases, it is possible to navigate the pages using buttons on the remote control, but because the commands available must apply to all manufacturers of DVB equipment, some on screen commands may not correspond exactly to the remote control buttons.
For example:
When “select” or “go” is displayed
When “”, “”, “”, “” symbol is displayed
Viewing
Viewing Teletext
Watching TV
MULTI WINDOW DIRECT TV REC
TV
When the key words are displayed on colour bar
When options with numbers are displayed
When “i” is displayed (information)
red
green
yellow
blue
To return to TV
Note
As soon as you switch to a DVB programme with links to a teletext service,
software is downloaded in the background to enable the teletext function. This means that when switching to a DVB programme, you should wait for approximately 5 seconds before pressing the TEXT button - this will allow the software to download. If you press the TEXT button before download is complete, there will be a short delay before the text screen is displayed. While navigating DVB teletext, you will fi nd there is a short delay when
moving between pages while the page downloads. There is often a prompt shown somewhere on the page (for example “Loading”) to let you know that this is happening.
17
Viewing Teletext
Analogue mode
What is FASTEXT mode (default)?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 19)
To change mode “Teletext” in Setup Menu (p. 27)
INPUT
OPTION
SD CARD
EXIT
RETURN
1
2
3
If in DVB mode
Select Analogue
Switch to Teletext
Displays the
index page (content varies depending on the broadcasters)
Select the page
up
or
down
To adjust contrast
Current page number
or
MENU
(Press twice)
Sub page number
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
Colour bar
green
red
(Corresponds to the colour bar)
As the blue bar is displayed
17:51 28 Feb
yellow
blue
Time / date
18
TV
Reveal hidden data
FULL / TOP / BOTTOM
DIRECT TV REC
EXIT
To return to TV
Reveal hidden words e.g. quiz page answers
MENU
red
MENU
green
Re-hide
(Expand the TOP half)
red
(TOP) (BOTTOM)
Normal (FULL)
(Expand the BOTTOM half)
Loading...
+ 42 hidden pages