Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product
correctly will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.
Plasma Television
Model No.
TH-37PA60E
TH-42PA60E
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record
of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic-europe.com
2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
Ensure that the mains plug is easily accessible.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
If you find any
abnormality, remove
the mains plug immediately!
(such as strange smell or smoke)
When cleaning the TV unit, remove the
mains plug
(Cleaning an energized unit may cause electrical shock.)
When TV will not be used for a long
time, remove the mains plug
This TV will still consume some power even in the
Off mode, as long as the mains plug is still
connected to a live socket outlet.
Allow sufficient space around the unit
for radiated heat
10
10
10
7
6
(cm)
Do not block the rear air vents
Blocked ventilation by curtains, etc. may cause
overheating, fire or electrical shock.
Remember not to keep still pictures on
the screen for extended lengths of time
Such still pictures cause after-images on the plasma
screen if they are displayed for a long time. These
after-images are not considered malfunctions and are
not covered by the warranty.
Typical still images
Channel number and unique logos
Image displayed in 4:3 mode
Video game
Computer image
12
To decrease the chance of after-images, a screen saver will
be automatically activated after a few minutes if there is no
signal and if there is no operation in AV mode. (p. 29)
The screen saver will be automatically deactivated when a
signal is detected or an operation is executed.
Keep the unit away from these equipment
Electronic equipment
In particular, do not place video equipment near the unit
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
AC 220-240 V
50 / 60 Hz
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Daily care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Do not remove covers
NEVER modify the unit yourself
(High-voltage components may cause serious
electrical shock.)
Have the unit checked, adjusted, or repaired at
your local Panasonic dealer.
Keep liquids away from the TV
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
Do not place foreign objects
inside the unit
Do not let metal or flammable objects drop into the unit
through the air vents (fire or electrical shock may result).
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV set to direct sunlight and other
sources of heat. To prevent fire never place any type
of candle or naked flame on top or near the TV set.
Do not place the TV on an unstable
surface
Use only the dedicated stands /
mounting
Using an unauthorized stand or other fixtures may
make the unit shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
equipment
Caution
The surface of the display panel has been specially treated and may be easily damaged.
•
Do not tap or scratch the surface with your fingernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
•
(this may degrade surface quality).
Cabinet
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Use care not to subject the TV unit's surfaces to detergent.
•
(A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
•
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
•
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
45
6
7
Quick Start Guide
+
-
-
+
TV
REC
VCRDVD
VCR
TEXT
N
EXIT
TV/AVGUIDE
F.P.
INDEX HOLD
123
45
6
78
9
C
0
PROGRAMME
DIRECT TV REC
ASPECT
MENU
OK
1 2 3
4 5
6
7 8
9
0
OK
C
TV
N
Identifying ControlsAccessories / Options
(
)
(
)
(
)
(
)
(
)
Standard accessories
Remote Control
Transmitter
EUR7651090
•
Clamper (2)
Check that you have the accessories and items shown
Batteries for the Remote
Control Transmitter
R6 (UM3)
•
Mains Lead
Installing remote's batteries
TH-37PA60E
1
2
Caution
Incorrect installation may cause battery
•
leakage and corrosion, resulting in
damage to the remote control unit.
Do not mix old and new batteries.
•
Do not mix different battery types (such as
•
alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
•
Optional accessories
PedestalPlasma TV stand
Note the correct
polarity (+ or -)
TY-ST42PA50WTY-S37PA60W
Pull
open
Hook
Close
Snap open
Snap shut
•
•
•
(TH-37PA60E)
TY-S42PA60W
(TH-42PA60E)
Operating Instructions
(2)
Pan European Guarantee Card
Pedestal
TBL0E0003
•
(TH-37PA60E)
TBL0E0004
•
(TH-42PA60E)
Read the manual of the
pedestal for installation.
Attaching the cable clampers
TH-42PA60E
Remove from the TV unit
Push both side
hooks and pull out
Do not bundle the RF cable and mains lead together (could cause
distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Wall-hanging
bracket
(vertical)
TY-WK42PV3W
TY-WK42PV2W
(angle)
TY-WK42PR2W
On / Off switch
Switches TV to On or Standby
(On / Off switch in On position)
Programme Guide (p. 10)
Select / OK
MENU
Press to access the Picture, Sound and
Setup menus
Teletext (p. 12)
Viewing a favourite teletext channel
(p. 12)
Changes programme / channel
(p. 10)
Direct channel access
During normal TV viewing or when in the
Tuning, Programme edit or Manual tuning
menus, press and then enter channel number
using the numeric buttons
To immediately record programme
in VCR / DVD recorder with Q-Link
connection
(p. 20)
Switches TV/AV
(To watch videos or DVDs) (p. 11)
EXIT (Returns to TV screen)
Coloured buttons
(used for various functions)
(for example, see p. 12)
Still Picture (p. 10)
Teletext Index (p. 12)
Programme Information (p. 10)
Volume
VCR / DVD operations (p. 11)
•
•
Identifying Controls
Accessories / Options
8
9
Quick Start Guide
TV
VCR
123
45
6
789
0
OK
Exit
Adjust
Select
Return
Bass
Tr
eble
Balance
MPX
Mode
Ambience
Sound menu
No service
Music
Off
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
AV2 AV3
RF OUT
RF IN
red
Connection
green
SuchlaufStart ATPAbbruch
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgien
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
Land
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
02 78:01 41
CH12
Exit
Auto Setup
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Watching TV
■
VHF / UHF aerial
Rear of the TV
Rear terminal portion
(enlarged view)
Fastener
To unfasten
•
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed your local dealer.
1
2
Turn the TV On with the On / Off switch
You can now use the remote
•
control to turn On the unit or
turn the unit to standby mode.
(Power lamp: On)
Select your country
select
For Belgium, Switzerland
•
and E.Eu, select the desired
language
To set manually
•
Start Auto Setup
(p. 18)
•
•
Auto Setup
Connection
Connect to AV2
•
or AV3 for a unit
supporting
Q-Link (p. 20).
SCART cable
(fully wired)
To record TV
■
programmes
DVD Recorder or VCR
Mains lead
(Connect after all the other connections.)
RF cable
Need help
with operations?
(example: Sound menu)
3
Auto Setup is now
complete and your
TV is ready for viewing.
Auto Setup will start to search
•
for TV channels and store them.
If Q-Link (p. 20) equipment is
•
connected, channel information
is automatically downloaded to
the equipment.
To edit channels
•
"Programme edit" (p. 16)
On-screen operation
guide will help you.
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.