Panasonic TH42PA40E, TH-37PA50EY, TH-42PA50E, TH37PA40E, TH-42PA50EY User Manual

...

123 456 789

Operating Instructions

Progressive Wide Plasma Television

Model No.

TH-37PA50E TH-42PA50E TH-37PA40E TH-42PA40E

The illustration shown is an image. Pedestal stand shown above is optional extra.

Please read these instructions before operating your set and retain them for future reference.

English

TQB0E0167U-2

Welcome

Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the be gin ning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this Plasma TV offers.

Contents

Important Safety Notice .............................................. 3

Safety Precautions ..................................................... 4

Maintenance ............................................................... 5

Accessories ................................................................ 6

Fitting remote control batteries ................................... 6

AC cord connection .................................................... 7

Cable binding instructions .......................................... 7

Quick Start Guide ....................................................... 8

Basic controls: front panel and remote control ......... 10

Using the On Screen Displays ................................. 11

Picture menu ............................................................ 12

Sound menu ............................................................. 13

Setup menu .............................................................. 14

Tuning menu – overview .......................................... 15

Tuning menu – Programme edit ............................... 16

Adding / deleting a programme channel ................ 16

Moving a programme channel ............................... 16

Tuning a programme channel ................................ 16

Renaming a programme channel .......................... 17

Locking a programme channel .............................. 17

Changing the sound system for a channel ............ 17

Copying programme information to

a recording device ........................................ 17

Tuning menu – Auto setup ........................................ 18

Tuning menu – Manual tuning .................................. 19

Manual tuning (via front panel) ................................ 19

Q-Link ....................................................................... 20

Aspect Controls ........................................................ 21

VCR / DVD operation ............................................... 23

Teletext operation ..................................................... 24

Still ............................................................................ 26

Audio / Video connections ........................................ 27

How to connect the Audio Output terminals ......... 28

How to connect the AV1 / 2 / 3 Scart terminals ..... 28

How to connect the Component Input terminals ... 28

Troubleshooting ........................................................ 29

Scart terminal information ........................................ 30

Speciﬁ cations ........................................................... 31

Important Safety Notice

ABCDEF

WARNING

1) To prevent damage which may result in ﬁ re or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (ﬂ ower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualiﬁ ed

service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only ﬁ t an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

CAUTION

1) This appliance is intended for use in environments which are relatively free of electromagnetic ﬁ elds.

Using this appliance near sources of strong electromagnetic ﬁ elds or where electrical noise may overlap with

the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ﬁ elds.

2) If a static electricity discharge occurs inside the front cover, the screen may momentarily ﬂ icker. This is not a malfunction.

The screen will return to normality in a short while.

To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Computer, USA.

• S-VGA is a registered trademark of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been

fully respected.

CAUTION:

Symptoms Check

After-images appear

ABCDEF

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the Plasma TV. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. With no signal present, and without any user operation, the Panasonic screensaver will appear automatically after a few minutes to prevent image retention.

Note:

The permanent after-image on the Plasma TV resulting from ﬁ xed image use is not an operating defect and as such is not covered by the Warranty. This product is not designed to display ﬁ xed images for extended periods of time.

Safety Precautions

WARNING

Setup

This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)

• Pedestal ............................................TY-ST42PA50W, TY-ST42PX5W

• Display stand ....................................TY-S37PA50W (TH-37PA50E, TH-37PA40E),

TY-S42PA50W (TH-42PA50E, TH-42PA40E)

• Wall-hanging bracket (vertical) .......... TY-WK42PV3W, TY-WK42PV2W

• Wall-hanging bracket (angle) ............ TY-WK42PR2W

Always be sure to ask a qualiﬁ ed technician to carry out set-up.

Do not place the Plasma TV on sloped or unstable surfaces.

• The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

• If water is spilt onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in ﬁ re or electric shock. If any foreign objects get inside the Plasma TV, please consult your local Panasonic dealer.

Ventilation should not be impleded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10 cm at the top, bottom, left and right, and at least 1.9 cm at the rear.

Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.

• It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.

Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed. Also, be careful about packaging materials and plastic sheets.

When using the Plasma TV

The Plasma TV is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes.

• Doing so may cause the Plasma TV to overheat, which can cause ﬁ re or damage to the Plasma TV.

Do not stick any foreign objects into the Plasma TV.

• Do not insert any metal or ﬂ ammable objects into the ventilations holes or drop them onto the Plasma TV, as doing so can cause ﬁ re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Plasma TV. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

Securely insert the power cord plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause ﬁ re. If the plug is damaged or the wall socket plate is loose, they shall not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modiﬁ cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause ﬁ re and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Plasma TV is not going to be used for any prolonged length of time, unplug the power cord plug from the wall outlet.

Safety Precautions

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Plasma TV, immediately unplug the power cord plug from the wall outlet.

• If you continue to use the Plasma TV in this condition, ﬁ re or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Plasma TV yourself is extremely dangerous, and should never be attempted.

If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damages, disconnect the power cord plug immediately.

• A short circuit may occur, which could cause ﬁ re. Contact your local Panasonic dealer for any repairs that need to be made.

CAUTION

When using the Plasma TV

Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV.

• Heated air comes out from the ventilation holes at the top of Plasma TV will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Plasma TV.

• If the Plasma TV is moved while some of the cables are still connected, the cables may become damaged, and ﬁ re or electric shock could result.

Disconnect the power cord plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ﬁ re.

Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reﬂ ected light from your Plasma TV.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with ﬁ ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Plasma TV.

If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Accessories

Check that you have the accessories and items shown

Operating Instructions Remote Control Transmitter

(EUR7651090)

123 456 789

Batteries for the Re mote

Clamper × 2 Control Transmitter (2 × R6 (UM3) size)

Mains Lead

Pan European Guarantee Card

Fitting remote control batteries

321

“R6 (UM3)” size

Pull and hold the hook, then open the battery cover.

Insert batteries - note correct polarity ( + and -).

• Make sure that the batteries are ﬁ tted the correct way round.

• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.

Replace the cover.

AC cord connection

How to ﬁ x:

Fix by pushing in till a clicking sound is heard.

How to release:

Pull up while drawing the knob.

Clamp

Cable binding instructions

For using the TY-ST42PX5W

Bind all cables to the plasma television with the cable clamper.

For TH-42PA50E

TH-42PA40E

Cable clamper

Bundle cable using the two cable clampers (left and right) ﬁ tted to the plasma television.

For TH-37PA50E

TH-37PA40E

For using the TY-ST42PA50W

Attach the bands.

Insert the spigot on the two bands into the pedestal.

Band

Fastening band

Fastening

Connect cables.

Example of “connection cable routing”

Mains Lead

To tighten.

Loosening

Pull off.

Keep the knob pressed.

Clamp

Binding strap

Band

Quick Start Guide

Connection and setting up options

Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.

RF cable (Not supplied)

SET TOP BOX

LRL

AUDIO

RF cable (Not supplied)

Connect the mains plug to the wall sock et.

AUDIOAUDIO

RGB

AV1 AV2 AV3

VIDEO

S-VIDEO

COMPONENT

VIDEO

Scart cables

(Not supplied)

VIDEO

RGB

S VIDEO

VCR / DVD

Recorder

Plug in aerial and connect ancillary equipment.

Press the [

] switch on the TV set to turn the

set on.

To switch the TV set to Standby mode, press the

button on the remote control.

The TV set can be switched on by pressing the

button again if it was in Stand by mode.

Note:

This TV will still consume some power as long as the mains plug is still inserted into the wall socket.

123 456 789

Remote control signal sensor

Power Indicator

Standby : Red

On : No Light

Quick Start Guide

Select your country.

For Belgium, Switzerland and E.Eu, select the desired language. If you wish to perform manual tuning, press the Green button. See page 19.

Press the Red button to start Auto Setup.

Auto setup will begin, your stations will be located and stored.

If a compatible recording device is connected to the correct Scart ter mi nal, programme data will be down load ed to the device via Q-Link. See page 20.

Green

Red

Land

Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgien Schweiz ELLADA Polska Česká republika Magyarország E.Eu

SuchlaufStart ATP Abbruch

CH12

AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT

02 78:01 41

Exit

123 456 789

TV to VCR or DVD Recorder Download

If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has been connected to a Scart terminal before starting Step 2, programme information will be downloaded to that device.

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

The programme positions will be downloaded to the recording device, in the same order as stored in the TV. See page 20.

Not all VCRs / DVD Recorders support this download of programme information, some may require to be started manually. Refer to the recording device’s operating instruction book.

If a recording device other than those described above has been connected, then there will be no download operation.

Notes:

• If the recording device has not accepted download data from the TV, you may need to select the Download option from the device’s menu system. Refer to the recording device’s operating instruction book.

• If Q-Link is not operating correctly, check the following:

The Scart cable is connected to the TV’s Scart terminal, AV2 or AV3, and correctly setup in the menu. The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar

technology) Scart terminal.

The Scart cable is a “fully wired” type.

• For further information on Q-Link and connecting equipment, see page 20, 28, 30.

Basic controls: front panel and remote control

On / Off switch

STR (Normalization store)

Used to store tuning and other function settings.

F (Function select) Displays the On Screen Display functions, use repeatedly to select from the available functions - Volume, Contrast,

Brightness, Colour, Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Tuning mode.

Standby On / Off button Switches TV On or Off (Standby mode).

GUIDE button

Displays the Programme table. Move the cursor to choose the position, then press the OK button to the viewing screen.

Menu button Press to access the Picture, Sound and Setup menus. (see page 12-14)

Press to conﬁ rm selections and choices.

Coloured buttons used for the selection, navigation and operation of various functions.

TEXT

TV/AV button (see page 27)

Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.

DIRECT TV REC

TV/AVGUIDE

EXIT

F.P. INDEX HOLD

Sound mute On / Off

DIRECT TV Record button

(see page 20)

Switch between viewing TV or AV input. (see page 27)

Cursor buttons to make selections and adjustments.

Exit the mode.

Text Hold / Picture Still button (see page 24, 26)

Text Index button (see page 26)

Teletext button (see page 24-26)

Text F.P. button (see page 25)

Direct channel access During normal TV viewing or when in the Tuning, Programme edit or Manual tuning menus, press and then enter channel number using the numeric buttons.

Channel up / down button

ASPECT control button (see page 21, 22)

N (Normalize) button Resets all settings to their default levels.

123 456 789

ASPECT

PROGRAMME

REC

VCR

VCR DVD

Programme / channel change buttons (0-

9) and Teletext page buttons. (see page 24-26) When in Standby mode, switches TV On.

Status button Press to display status information for the current Programme position, Programme name, Channel number, MPX mode, Receiving system and ASPECT mode. Press again to remove the information.

Volume up / down button

VCR / DVD buttons (see page 23)

+ 22 hidden pages