Panasonic Terminal GTWIN Installation Manual
Safety Precautions
Read and understand this specifications, instruction manual, installation manual and ca talog to make
proper use of the product.
WARNING
If critical situations that could lead to user’s death or serious injury is assumed by
mishandling of the product:
- Do not play the accompanying disk on an audio CD player or speakers of a personal comput er.
It could lead to the inj ur y of your ears or t he dam age to the speakers due t o m egavolume.
TRADEMARKS and COPYRIGHT
- You may use this software in accordance with the “Licensing terms for the software”.
- This manual and it s cont ents are copyrighted.
- You may not copy this manual, in whole or part, without written consent of Panasonic E lectric
Works SUNX Co., Ltd.
-Windows and Windows NT are registered trademarks of Microsoft Cor por ation in the United States
and/or other count ri es.
- Ethernet is regi ster ed trademarks of Fuji Xerox Co., Ltd. and Xerox Corp. in t he Unit ed States.
- SDHC logo and SD logo are trademarks.
- All other company names and product names are trademarks or registered trademarks of their
respectiv e owners.
- Panasonic Electri c Wor ks SUNX Co., Ltd. pursues a policy of continuous improv em ent of the
design and perform ance of it s products, therefore, we reserve the right to change the
manual/product without notice.
POTTOOL
Table of Contents
1.1 Preparation .......................................................................................................................... 2
1.1.1 Package Contents .......................................................................................................... 2
1.1.2 Items You Need to Prepare ........................................................................................... 3
1.2 Manuals to be Used ............................................................................................................ 4
1.3 About Windows ................................................................................................................ 5
1.3.1 Usage Environment ....................................................................................................... 5
1.3.2 Precautions when using Windows Vista and Windows7 .......................................... 6
1.4 Installing GTWIN ................................................................................................................. 7
1.5 Installing USB Driver ........................................................................................................ 12
1.5.1 When installing on Windows Vista, XP, 2000 ........................................................... 12
1.5.2 When installing on Windows7 ................................................................................... 15
1.5.3 Setting for Transferring Screens .................................................................................. 18
1.1 Preparation
1.1.1 Package Contents
The following items are supplied with this manual for Terminal GTWIN.
Key Point: User card
Please tear along the perforation line, and fill in and send back "User Registration Card" to us.
As the license number is written on the other "Customer Copy", keep it in a safe place.
2
1.1.2 Items You Need to Prepare
The following parts are not supplied with GTWIN. Please purchase them separately accordin g to your
application.
Screen transfer cable
This cable is required to transfer data from the PC which GTWIN has been installed to GT.
GT02/ GT02L/GT05/GT12/GT32/GT32-E
Between PC(USB) and Programmable Display
USB cable (Commercial product) Applicable model Cable type Length
GT05/GT32/
GT32-E
GT02/GT02L/GT12
Note) Windows2000 or later OS is required for the communication with a USB.
GT01/GT11/GT21
Between PC (RS232C) and Programmable Display
D-sub connector cable
PC side
connector
USB2.0 (or 1.1) AB type Max. 5 m
USB2.0 (or 1.1) cable
A type (Male): miniB type (Male)
GT side
connector
Description Product No.
Max. 5 m
Note) A USB/RS232C conversion cable is necessary to connect with a personal computer without a
serial port using a PC connection cable.
SD memory card (Commercial product)
It is used for the types equipped with the SD memory card slot.
Printed
logo
on GT
Note) Select the capacity of a SD memory card according to the logo printed on the GT and the version
Battery
It is required to use a SD memory card and back up data.
Description Product No.
GT version (Ver.) Usable SD memory card
GT02M2
GT02G2
1.00 or
later
1.00 or
later
1.00 or
later
1.00 or
later
of GT firmware.
GT05 GT12 GT32 GT32-E Card type Capacity
1.39 or
older
1.40 or
later
1.39 or
older
1.40 or
later
For GT11, GT21 1 pc CR2032 (Commercial item)
For GT02M2, GT02G2, GT05, GT12, GT32,
GT32-E
D-sub 9-pin
1.09 or
older
1.10 or
later
1.09 or
older
1.10 or
later
1.49 or
older
1.50 or
later
1.49 or
older
1.50 or
later
Mini DIN round
5-pin
1.00 or
later
1.00 or
later
1.00 or
later
1.00 or
later
SD memory card 32M to 1GB
SD memory card 32M to 2GB
SDHC memory card
CLASS2 and 4
SD memory card 32M to 1GB
SD memory card 32M to 2GB
SDHC memory card 4GB to 32GB
1 pc AFPX-BATT
L type (3 m) AFC8503
Straight type
(3 m)
AFC8503S
4GB to 16GB
3
1.2 Manuals to be Used
This manual describes only the installation of GTWIN. Please prepare the following manuals
separately.
Request for manuals:
For brochures
Please contact your dealer. (Free of charge)
For PDF data
Please contact your dealer, or download the PDF data from our web site.
http://panasonic-denko.co.jp/ac/e/
Manual
Note) The contents of the previous Technical Manual ARCT1F398E and GTWIN Operational Guide
Book ACGM0357V**EN have been thoroughly revised and described in each manual.
Other manuals
- General-purpose Serial Communication Manual ARCT1F356E
This manual is necessary for communicating with the board developed by Panasonic or external devices
such as a PC.
- Connection with other companies' PLCs Manual ARCT1F449E
This manual describes the connection methods with other companies' PLCs. The connection methods
with our PLCs are described in GT series User's Manual.
- Parts Library ARCT1F453E
This manual consists of the parts lists used in GTWIN. It is available only in PDF.
- MODBUS(RTU mode) Slave Manual ARCT1F501E
This manual is necessary for using MODBUS (RTU mode) slave. It is available only in PDF.
(User registration is required. Free of charge)
GT series User's Manual
Manual No. ARCT1F511E
This manual describes the specifications, installation and
connections of GT series.
GT series Reference Manual
Manual No. ACGM0357V**EN
This manual describes the screen creation with GTWIN and
settings of various functions of GT series.
4
1.3 About Windows
1.3.1 Usage Environment
Confirm the environment you use.
Usable environment
OS Windows 7
Windows Vista
Windows XP
Windows 2000
Required hard disk space 400MB or more
Recommended CPU Intel Pentium III 600MHz or more
Recommended system RAM 128MB or mor e
Recommended display resolution 1240 x 768 or more
Recommended display colors 4096 colors or more
Note:
Windows (64-bit edition)
64-bit edition of Windows is not supported.
To use HELP function
Microsoft Internet Explorer 4.0 or later should be installed to use the HELP function of GTWIN. If you do
not have it, please download from Microsoft Web site.
Installation
The software should be installed by the account with administrator authority. If it is installed by other
ways, it will not work properly. GTWIN can be used with administrator or power user authority after
installation.
5
Loading...