Televisión de alta definición de 720p y clase 32” de LCD
(31,5 pulgadas medidas diagonalmente)
Model No.
Número de modelo
TC-L32C12
Quick Start Guide
(See page 8-16)
Guía de inicio rápido
(vea la página 8-16)
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
ó visítenos en www.panasonic.com/contactinfo
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Español
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TM
TQB2AA0819-1
Turn your own living room into a movie theater!
Experience an amazing level of multimedia excitement
Accessories/Optional Accessory ····· 8
Basic Connection ···························10
Identifying Controls ························14
First Time Setup·····························15
Enjoy your TV!
Basic Features
Watching TV ···············································17
Using VIERA TOOLS ································· 19
Viewing from SD Card ·······························20
Watching Videos and DVDs ·······················22
Displaying PC Screen on TV ·····················24
Advanced Features
How to Use Menu Functions
(picture, sound quality, etc.) ·······················26
VIERA LinkTM “HDAVI ControlTM” ················30
Lock ··························································· 36
Editing and Setting Channels·····················38
Closed Caption ·········································· 40
Input Labels ··············································· 41
Using Timer ················································ 42
Recommended AV Connections ················ 43
Quick Start
Guide
ViewingAdvancedFAQs, etc.
This product qualifies for ENERGY STAR
in the “Home” setting and this is the setting
in which energy savings will be achieved.
Any modifications to the “Home” setting or
other factory default settings could result in
greater energy consumption beyond levels
that meet ENERGY STAR qualifications.
FAQs, etc.
Ratings List for Lock ··································44
Technical Information ·································45
Care and Cleaning ·····································49
FAQ ···························································· 50
Specifications ············································· 52
Limited Warranty
(for U.S.A. and Puerto Rico only)···············53
Customer Services Directory
(for U. S. A. and Puerto Rico)
Limited Warranty (for Canada) ···················55
······················54
3
Safety Precautions
The lightning flash with
CAUTION
RISK OF ELECTRIC SHOCK
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
DO NOT OPEN
Note to CATV System Installer
This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Secure Ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space
from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface.
This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to
your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
17) Never push objects of any kind into this LCD TV through cabinet
slots as they may touch dangerous voltage points or short out parts
that could result in a fire or electric shock. Never spill liquid of any
kind on the LCD TV.
18) If an outside antenna is connected to the tele vi sion equipment,
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charg es.
In the U.S. Section 810-21 of the National Electrical Code
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
re quire ments for the grounding electrode.
EXAMPLE OF ANTENNA
GROUNDING AS PER
(NEC) NATIONAL
ELECTRICAL
CODE
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
4
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the
papers with the appliance.
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
19) An outside antenna system should not be lo cat ed in the vicinity of overhead power lines, other electric light, power circuits, or
where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21)
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,
23) WARNING: SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL
24) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
25) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
26) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
27) CAUTION: This LCD TV is for use only with the following optional accessory. Use with any other type of optional
controls may result in damage and will often require extensive work by a qualified technician to restore the LCD
TV to normal operation.
MOISTURE, DRIPPING OR SPLASHING.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET
(INCLUDING ON SHELVES ABOVE, ETC.).
PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS
AND PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN,
CREATING THE POTENTIAL RISK OF SUFFOCATION.
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EX PO SURE.
OR EQUIVALENT TYPE.
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation)
• Wall-hanging bracket: TY-WK3L2RW
Always be sure to ask a qualified technician to carry out set-up.
NOTE: This equipment is designed to operate in North America and other countries where the broadcasting system and AC
house current are exactly the same as in North America.
5
Safety Precautions (Continued)
CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriat ely
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
•One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.
•Carefully read and understand all enclosed instructions for proper use of this product.
•Don’t allow children to climb on or play with furniture and television sets.
•Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
•Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.
•Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
•Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
•Follow all instructions supplied by the display and wall mount manufacturers.
•If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
•Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.
•A minimum of two people are required for installation. Flat panel displays can be heavy.
6
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic
Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TC-L32C12
Responsible Party:Panasonic Corporation of North America
Contact Source:Panasonic Consumer Electronics Company
email:consumerproducts@panasonic.com
One Panasonic Way, Secaucus, NJ 07094
1-877-95-VIERA (958-4372)
7
Accessories/Optional Accessory
Accessories
Check you have all the items shown.
Accessories
Remote Control
Transmitter
N2QAYB000321
Batteries for the
Remote Control
Transmitter (2)
Operating Instructions
Quick Setup Guide
Optional Accessory
AA Battery
Cleaning clothPedestal
TBL2AX00261
Accessories
Assembly
screws (4)
M4 × 10
Product Registration Card (U.S.A)
Customer Care Plan Card (U.S.A)
Wall-hanging bracket
TY-WK3L2RW
Please contact your nearest Panasonic dealer to
purchase the recommended wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
Installing the remote’s batteries
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
Do not mix old and new batteries.
•
Do not mix different battery types (such
•
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
•
batteries.
Do not burn or break batteries.
Hook
Open
Close
Note the correct polarity
(+ or -).
8
Attaching the pedestal to TV
Fix securely with assembly screws A. (Total 4 screws)
Tighten screws firmly.
Foam mat or thick
soft cloth
A
A
Quick Start
Guide
Accessories/Optional Accessory
WARNING
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Reference of connection
Antenna terminalPin terminalsHDMI terminal
greenbluered
green
Firmly tighten by hand.
Match colors of plugs and terminals.
Insert firmly.
Insert firmly.
9
To connect the antenna terminal and Cable Box
ANTENNA
Cable In
HDMI 1HDMI 2
Basic Connection
Example 1
TV
Cable TV
Connecting Antenna (To watch TV)
VHF/UHF Antenna
Cable TV
VHF/UHF Antenna
or
VHF/UHF Antenna
NTSC (National Television System Committee):
•
Conventional broadcasting
ATSC (Advanced Television Systems Committee):
•
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.
Back of the TV
AC 110-127 V
60 Hz
Power Cord
(Connect after all the
other connections.)
10
(If no Cable Box)
or
ANT OUTANT IN
Cable Box
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
For additional assistance, visit us at: www.panasonic.com
Cable Box/Cable
You need to subscribe to a cable TV service to enjoy viewing their
•
programming.
If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.
•
You can enjoy high-definition programming by subscribing to a high-
•
definition cable service.
The connection for high-definition can be done with the use of HDMI or
Component Video cable. (p. 13)
To view high-definition programming select the correct video input. (p. 22)
•
www.panasonic.ca
To connect the antenna terminal and DVD recorder or VCR
ANTENNA
Cable In
Y
P
R
PB
R
L
AUDIO
R
L
AUDIO
VIDEO
HDMI 1HDMI 2
COMPONENT IN
VIDEO IN 1
AUDIO IN
PC
DIGITALAUDIO OUT
AUDIO IN
PC
DIGITAL
AUDIO OUT
Example 2
Connecting DVD recorder (VCR) (To record/playback)
TV
AV Equipment
(e.g. DVD Recorder
or VCR)
VHF/UHF Antenna
DVD Recorder
If the source has a higher resolution signal
(480p/720p/1080i), connection can be made with
the use of a Component Video or HDMI cable.
VCR
Connection can be made with the use of an RF
cable and Composite Video/S Video cable. (p. 13)
VHF/UHF Antenna
Power Cord
Back of the TV
AC 110-127 V
60 Hz
A
Quick Start
Guide
Basic Connection (TV + DVD Recorder or VCR)
(Antenna + TV)
AV Equipment
(e.g. DVD Recorder or VCR)
(with TV tuner)
ANT OUTANT IN
B
C
Connecting TV and AV equipment
Please refer to
- C on p. 13
A
11
To connect the antenna terminal and Satellite Receiver and DVD recorder or VCR
ANTENNA
Cable In
Y
P
R
PB
R
L
AUDIO
R
L
AUDIO
VIDEO
HDMI 1HDMI 2
COMPONENT IN
VIDEO IN 1
AUDIO IN
PC
DIGITALAUDIO OUT
AUDIO IN
PC
DIGITAL
AUDIO OUT
Basic Connection (Continued)
Example 3
TV
Connecting DVD recorder (VCR) and satellite receiver
You can enjoy high-definition
programming by subscribing to
high-definition satellite service.
Connection can be done with the
DVD Recorder
or
VCR
Satellite
Receiver
VHF/UHF Antenna
use of HDMI or Component Video
cable. (p. 13)
VHF/UHF Antenna
AC 110-127 V
60 Hz
Power Cord
Back of the TV
A
12
B
C
ANT IN
ANT OUTANT IN
Connecting TV and AV equipment
Please refer to
Satellite ReceiverDVD Recorder or VCR
Note
For details of external equipment connections, please refer to the operating manuals for the equipment.
(with TV tuner)
- C on p. 13.
A
High-Definition
Standard-Definition
A
HDMI 1HDMI 2
Y
P
R
P
B
R
L
AUDIO
COMPONENT IN
R
L
AUDIO
VIDEO
VIDEO IN 1
To use HDMI terminals
AV cable connections
HDMI
AV OUT
Connecting to the HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
AV Equipment
e.g. Blu-ray Disc
player
For “VIERA LinkTM connections”, please refer to p. 31.
B
To use COMPONENT terminals
Y
green
blue
red
white
red
green
blue
red
white
red
P
PR
L
R
B
COMPONENT
VIDEO OUT
AUDIO
OUT
AV Equipment
e.g. Blu-ray Disc
player
green
blue
red
white
red
Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)
C
To use COMPOSITE terminals
AV Equipment
Quick Start
Guide
Basic Connection (AV cable connections)
(TV + DVD Recorder or VCR + Satellite Receiver)
Note
Some programs contain a copyright protection signal to prevent recording.
When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
For more details on the external equipment’s connections, please refer to the operating manuals of this equipment.
yellow
white
red
yellow
white
red
yellow
white
red
L
COMPOSITE
OUT
R
e.g. DVD Recorder
or
e.g. VCR
13
Identifying Controls
TV controls/indicators
Front of the TV
Selects channels in sequence
Volume up/down
Menu navigations
Changes the input mode
Power indicator
( on: red,
off: no light)
Remote control sensor
Within about 23 feet (7 meters) in front of the TV set.
Note
The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
Do not place any objects between the TV remote control sensor and remote control.
Remote control
Chooses menu and submenu entries.
POWER button
Closed caption On/Off (p. 17)
Switches TV On or Off (Standby)
Changes the input mode (p. 22)
VIERA Link menu (p. 34-35)
Displays Sub Menu (p. 17, 28)
Colored buttons
(used for various functions)
(for example, p. 16, 20, 34)
Volume up/down
Sound mute On/Off
Changes aspect ratio (p. 18)
Switches to previously viewed channel
or input modes.
External equipment operations
(p. 35)
Selects Audio Mode for TV viewing (p. 17)
Exits from menu screen
Displays Main Menu (p. 26)
Displays VIERA TOOLS (p. 19)
Viewing from SD Card (p. 20-21)
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel
banner (p. 18)
Operates the Favorite channel list
function. (p. 18)
Numeric keypad to select any channel
(p. 17) or press to enter alphanumeric input
in menus. (p. 16, 22, 34, 36, 38, 41, 42)
Use for digital channels. (p. 17)
14
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 28-29) is set to “No”.
Turn the TV On with the POWER button
or
or
(Remote)(TV)
Press to exit from
■
a menu screen
Press to return
■
to the previous
screen
* This setting will be skipped next time if you select “Home”.
Select your language
Language
EnglishFrançaisEspañol
select
ok
Be sure to select “Home”
Please select your viewing environment
HomeStore
Please confirm your selection (Home) before pressing OK button.
If you select “Store” by mistake in , confirmation screen will be
■
select
ok
displayed.
You are selecting the mode for store demonstration
YesNo
Select “No” and return to previous screen .
If you select “Yes”, Screen enters store demonstration mode.
To display the “Please select your viewing environment” screen again as shown
above and select “Home”, do one of the following:
• Press and hold down the side POWER button.
• Unplug the TV and plug it again.
select
ok
Adjust the clock
First time setup
Language
Clock
ANT/Cable setup
Input labels
Clock
Year
Month
Day
Hour
Minute
2009
1
7
10 AM
10
next
select
set
select item
Year: Select the year
Month: Select the month
Day: Select the day
Hour: Adjust the hour
Minute: Adjust the minute
Quick Start
Guide
First Time Setup
Identifying Controls
15
First Time Setup (Continued)
GAME
Select
OK
RETURN
DeleteABC → abc
GY
Video 2
PC
G A A
Auto channel setup
Select “ANT/Cable setup”
First time setup
Language
Clock
ANT/Cable setup
Input labels
next
select
16
Press to exit from
■
a menu screen
Note
To change setting
(Language/Clock/
ANT/Cable setup/
Input labels) later, go
to Menu screen
(p. 28)
About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
Select “ANT in”
ANT/Cable setup
ANT in
Auto program
Cable
set
select
ANT in
Cable: Cable TV
Antenna
Not used
: Antenna
: Skip TV tuning go to
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
Typical when Cable/Satellite box is connected to a TV input.
Prevents accidental tuning to an unavailable signal.