Panasonic TC-19LX50N, TC-19LE50N, TC-23LE50N, TC-19LE50, TC-23LX50N User Manual

...
R-STANDBY G-POWER ON
SAP
POWER
DB S
/
C B
L
V
D V
D
V T
CH
O K
VOL VOL
CH
RETURN
MENU
EXIT
GUIDERECALL MUTETV/VIDEO
R-TUNE
PAUSE
ASPECT TV/VCR
123
456
78
9
SLEEP PROG
0
PLAY
FFREW
REC
STOP
VCR/DBS CH
T V
Operating Instructions
LCD Television
Model No.
TC-19LX50 TC-23LX50 TC-19LE50 TC-23LE50
TV screen image is simulated. LCD TV shown above is model TC-23LX50.
For assistance, please call : 1-800-211-PANA (7262)
or visit us at www.panasonic.com/contactinfo (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
English
Espan˜ol
[Resumen]
TQBC0994

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Secure ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not be placed in a built­in installation such as a bookcase unless proper ventilation is provided.
Important Safety Instructions for LCD TV
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
17) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the LCD TV.
2
Important Safety Instructions
18) If an outside antenna is connected to the television is grounded so as to provide some protection
equipment, be sure the antenna system
against voltage surges and built up static charges. In the U.S. Section 810-21 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
19) An outside antenna system should not be located in the vicinity of overhead power lines or other
EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NATIONAL ELECTRICAL CODE
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
ANTENNA LEAD-IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the LCD TV. c. If the LCD TV has been exposed to rain or water. d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to
restore the LCD TV to normal operation. e. If the LCD TV has been dropped or the cabinet has been damaged. f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22) WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE. DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET. (INCLUDING ON SHELVES ABOVE, ETC.)
23) WARNING : KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF
SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS.
24) CAUTION :
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
25) CAUTION : USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
26) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
NOTE :•This equipment is designed to operate in North America and other countries where the
broadcasting system and AC house current are exactly the same as in North America.
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
www.eiae.org.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD TV. To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.
For assistance, please call : 1-800-211-PANA (7262)
or visit us at www.panasonic.com/contactinfo (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Federal Communication Commission Information
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the TV antenna. Increase the separation between TV and other equipment. Connect TV into separate outlet from other equipment. Consult the dealer or an experienced radio / TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
The ENERGY STAR Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) to help customers identify products that can save them money and protect the environment by saving energy. ENERGY STAR consume less energy than similar standard products.
label, a symbol for energy efficiency, was created by the U.S.
compliant products generally
4

Table of Contents

Important Safety Instructions .............................. 2
Maintenance .......................................................... 5
SUPPLIED ACCESSORIES ................................... 6
Remote control battery installation ...................... 6
Installation ............................................................. 7
Connections .......................................................... 8
Antenna Connection ............................................ 8
Cable Box Connection ......................................... 8
Connecting Other Equipment .............................. 9
Connecting Headphones / Earphones ............... 10
Power ON / OFF ................................................... 10
Basic Controls ..................................................... 11
Menu Operations ................................................. 12
Tuning Channels ................................................. 14
LOCK .................................................................... 15
CLOSED CAPTION .............................................. 19
INPUT LABEL ...................................................... 19
OTHER ADJUST .................................................. 20
PICTURE ADJUST ............................................... 21
POSITION/SIZE .................................................... 22
AUDIO ADJUST ................................................... 23
ASPECT Controls ................................................ 24
Operating peripheral equipment using
the remote control............................................ 25
Programming the remote control code .............. 25
Infrared Code Index ........................................... 26
Mode Operational Key Chart ............................. 28
Manuel de instrucciones [ Resumen ]
Instalación .................................................. 29
Instalación de las pilas del mando a distancia
Conexión .................................................... 30
Conexión de antena .................................. 30
Conexión del receptor de TV por cable ..... 30
Conexión de otro equipo ........................... 31
Conexión de auriculares ............................ 32
Conexión / desconexión de la alimentación ...
Controles básicos ...................................... 33
Operaciones con menús ........................... 34
Sintonización de canales .......................... 36
Troubleshooting .................................................. 37
CUSTOMER SERVICES DIRECTORY (for U.S.A.) ............ 38
Specifications ...................................................... 39
..... 29
32

Maintenance

To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, carefully read the instructions that came with the cloth.
CAUTION :
If water or other liquid enters the monitor through the display panel surface, a malfunction may occur.
Mild detergent
5

SUPPLIED ACCESSORIES

Check the accessories before installation.
• Operating Instructions • Remote Control
Transmitter (EUR7613Z90R)
• Batteries for the Remote Control Transmitter (2 × AA size)
• Warranty Card
• Product Registration Card and Customer Care Plan Card (For U.S.A.)
• F-Type Antenna Connector (for 4C-2V) ( × 1)

Remote control battery installation

Requires two AA batteries.
1. Open the battery cover.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environmentally friendly manner.
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.
2. Install the batteries. Note the correct polarity (+ and -).
Two AA size
3. Replace the cover.
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote controls for other equipment at the same time.
• If the TV does not operate even when using the remote control from a close range, it is time to replace the batteries.
6

Installation

Receiver Location
Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 5 ° forward and 10 ° back, and rotated 20 ° to the right / left.
POWER TV/VIDEO – VOL + CH
Optional External Equipment
The Video / Audio connection between components can be made with shielded video and audio cables. For best performance, antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store. Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable youll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to hang the LCD Television on the wall
This LCD Television is for use only with the following optional accessory. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.
Wall-hanging bracket ........................................................ TY-WK22LR1W
Always be sure to ask a qualified technician to carry out set-up.
7

Connections

Note:
Cables and connectors are not supplied with this set.

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. The antenna mode must be set to TV (see page 14, Mode selection).
Back of the TV
Antenna Terminal
ANT
75 Ohm
F-Type Antenna Connector
Coaxial Cable

Cable Box Connection

For reception of cable channels (01 - 125), connect the cable supplied by your local cable company. The antenna mode must be set to CABLE (see page 14, Mode selection).
Certain cable systems offset some channels to reduce interference or view Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local cable company for its compatibility requirements.
Set the TV channel to CH3 or CH4 when using this connection.
UHF AntennaVHF Antenna
Mixer
Cable Box
Back of the TV
Cable Box and VCR
Back of the TV
ANT
ANT
OUTPUT
OUTPUT
ANT OUTPUT ANT INPUT
INPUT
INPUT
Incoming 75 Ohm Cable from Cable Company
CABLE BOX
Incoming 75 Ohm Cable from Cable Company
CABLE BOX
VCR
8

Connecting Other Equipment

Rear Input Terminals
To bundle the cables with the clamper
1. Pull upward.
Note:
To avoid noise do not put the antenna cable and the power cord together.
2. Put the cables in the clamper and close.
Connections
Back of the TV
COMPONENT VIDEO OUT
DVD / STB
Super-VHS VCR
Y
P
P
Audio
OUT
R
COMPONENT VIDEO cable
B
R
L
AUDIO cable
COMPONENT VIDEO INPUT
Y
VIDEO
P
B
PR
L
AUDIO
R
INPUT
21
S-VIDEO
VIDEO
AUDIO OUT
S-VIDEO cable
S-Video
CAMCORDER
OUT
VIDEO cable
Video
OUT
VIDEO GAME CONSOLE
Audio
OUT
R
L
AUDIO cable
Notes:
When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal and the VIDEO input terminal are connected.
Please make inquiries of video game manufacturers concerning component cables to connect with video game console.
Rear Output Terminals
L
Audio
IN
R
AUDIO cable
COMPONENT VIDEO INPUT
Y
VIDEO
B
P
PR
L
AUDIO
R
21
INPUT
S-VIDEO
VIDEO
AUDIO OUT
Back of the TV
9
Connections

Connecting Headphones / Earphones

M3 plug (Not supplied)

Power ON / OFF

Preparation
Connect the plug to the wall outlet.
Note:
The TV consumes some power as long as the power cord is inserted into the wall outlet.
Main POWER switch
Remote control sensor
C.A.T.S. sensor
LCD C.A.T.S. (Contrast Automatic Tracking System) automatically senses the ambient light conditions and adjusts the brightness and gradation accordingly, to optimize contrast. C.A.T.S. is in effect when PIC MODE is set to AUTO (see page 21).
POWER TV/VIDEO – VOL + CH
R-STANDBY G-POWER ON
R-STANDBY G-POWER ON
Power Indicator
On the main unit
On the remote control
POWER
POWER
Back of the TV
AC120V, 60Hz
Power cord
Press to turn the TVs main power on / off.
Power indicator Main power ON: Green Main power OFF: No light
Press to turn the TV on / off.
Power indicator Power ON : Green Power OFF (Standby): Red
This does not work when the main power is off (No light) (see above).
Note:
The screen below is displayed for a few moments when the TV is turned on.
ZOOM
CH 6
STEREO
SAP
MONO
10
POWER
TV
VCR
DBS/
CBL
SAP
DVD
Note:
Select the menu language before operating the TV (see pages 12, 13, LANGUAGE).
Buttons
Buttons

Basic Controls

< Top Side Controls >
POWER TV/VIDEO – VOL + CH
TV/VIDEO button
Volume Up/Down
Main POWER switch
Press to turn the TVs main power on/off.(see page 10)
Channel Up/Down
Power button
Press to turn the TV ON or OFF.
Note:
The TVs power cord must first be plugged into the wall outlet and then the TV can be turned on using the POWER switch.
Direct program number selection buttons
R-TUNE
R-TUNE button
Switches to previously viewed channel or video mode. Not effective under the following conditions:
1. Right after the TV is turned on.
2. After switching TV / CATV (MODE in PROGRAM CHANNELS).
3. Right after the ACP (Automatic channel programming) execution.
4. When the same channel as the present channel is selected.
SLEEP
PROG dash button / SLEEP TIMER button
PROG
Program dash channel numbers for DTV and DBS. Sleep timer (MINUTES)
0306090
ASPECT
ASPECT button
TV/VCR
Change screen size (see page 24).
JUST ZOOM FULL NORMAL
Remote control sensor Within about 23 feet (7 meters) in front of the TV set.
R-STANDBY G-POWER ON
POWER
D
BS/
VCR
V
T
CH
O K
VOL VOL
CH
MENU
123
456
78
R-TUNE
0
PLAY
STOP
PAUSE
ASPECT TV/VCR
VCR/DBS CH
T V
C
BL
SLEEP PROG
REC
9
FFREW
SAP
DVD
RETURN EXIT
GUIDERECALL MUTETV/VIDEO
SAP button
Selects Audio mode (see page 23).
STEREO SAP MONO
Mode Selection buttons
Digital Broadcasting Satellite mode for Remote Control / Cable TV Mode Selection for Remote Control
VCR Mode Selection for Remote Control
VCR
TV
Digital Video Disc Mode Selection for Remote Control
DBS/CBL
DVD
TV Mode Selection for Remote Control
Changes to the next channel up
Moves cursor upward during menu mode.
Reduces volume
Moves cursor to the left during menu mode.
Displays menu
Press to access TV, DTV, DBS or DVD menus.
Increases volume
Moves cursor to the right during menu mode.
CH
O K
VOL VOL
CH
MENU
RETURN EXIT
Press to Return to previous MENU or EXIT from menu.
Changes to the next channel down
Moves cursor downward during menu mode.
Press to display input mode menu. While the menu is displayed, press again to change the input mode. The input mode changes each time this button is pressed.
Press this button to mute the sound, press again to cancel the mute.
GUIDERECALL MUTETV/VIDEO
GUIDE button for DBS.
Press to display the current system status, for example, Aspect mode, Channel number, Stereo mode, TV/ VIDEO and Off timer.
Operation of other Device
Buttons
Buttons
Device
VCR
CABLE/DBS
DVD
Buttons
Buttons
Device
VCR
CABLE/DBS
DVD
VCR REW/FF
Skip Search REW/FF
VCR RECORD
FFREW
-
REC
-
-
PLAY
PLAY
-
PLAY
ASPECT
TV/VCR
TV/VCR Switch STB
-
ASPECT
Open / Close
Pause
-
Pause
VCR/DBS CH
VCR CH up/down
PAGE up/down
Slow +/
--
STOPPAU SE
STOP
-
STOP
11
12
VCR
DVD
1 2 3
4 5 6
7 8
0
9
RETURN EXIT
R-TUNE
SLEEP
PROG
GUIDE
RECALL MUTE
SAP
POWER
CH
DBS/
CBL
TV
CH
VOL
TV/VIDEO

Menu Operations

2
or
Press to display MENU screen.
An On Screen Help box is displayed when a menu is displayed on the TV. This Help box indicates which keys on the remote control are used to navigate the menu shown.
ON SCREEN HELP
Instruction box
1
MENU
ADJUST SET UP
LANGUAGE PROGRAM CH LOCK CLOSED CAPTION INPUT LABEL OTHER ADJUST
MENU
ADJUST SET UP
LANGUAGE PROGRAM CH LOCK CLOSED CAPTION INPUT LABEL OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST POSITION / SIZE
AUDIO ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST POSITION / SIZE
AUDIO ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST POSITION / SIZE
AUDIO ADJUST
LANGUAGE
ENGLISH
LANGUAGE
RETURN
CHANGE
TV/VIDEO
Change the input mode.
Press to display the Input selection menu.
Press corresponding number key on the remote control to select the input of your choice.
Note:
Video input can also be selected by pressing , then the CH
buttons,
and push
OK key.
1 TV 2 COMPONENT 3 VIDEO 1 4 VIDEO 2
TV/VIDEO
13
Menu Operations
(See page 21)
To return to the previous screen :
To exit the MENU screen: This returns TV to normal viewing.
Press to select the MENU screen (ADJUST or SET UP).
Press to select the sub-menu feature.
Press to display the sub-menu screen.
(See pages 15-18)
(See page 23)
Select the menu language.
(See page14)
(See page 19)
(See page 20)
(See page 19)
(See page 22)
OFF ON
COOLCOOL
NORMAL PIC MODE BACK LIGHT PICTURE BRIGHTNESS COLOR TINT SHARPNESS AI PICTURE
+ 20 + 20
0 0 0 0
OFF ON
STANDARD
PICTURE ADJUST PAGE 1/2
CH
CH
VOL VOL
O
K
RETURN EXIT
MENU
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
AUDIO ADJUST
NORMAL
5 + 3
0
STANDARD
PAGE 1/2
OFF ON
MODE BASS TREBLE BALANCE AI SOUND SURROUND STEREO SAP MONO
OFF ON
OFF ON
P O S IT ION / SI ZE
NORMAL
P O S IT ION
NORMALIZE SIZE 15
RETURN
LANGUAGE
ENGLISH
LANGUAGE
ENGLISH FRANÇAIS
ESPAÑOL
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
PROGRAM CHANNELS
COMPONENT VIDEO1 VIDEO2
COMPONENT
VIDEO1 VIDEO2
INPUT LABEL
OTHER ADJUST PAGE 1/2
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
OFF ON
MPEG NR
OFF ON
CLOSED CAPTION
MODE
OFF
C1 C2
OFF
Loading...
+ 28 hidden pages