Panasonic SU-Bi-polar User Manual
Radial Lead Type
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
Series:
SU(Bi-polar)
Typ e:
A
■ Features
Endurance : 85 °C 2000 h
●
RoHS directive compliant
●
■ Specifi cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 6.3 V. DC t o 50 V.DC
Nominal Cap. Range 0.47 µF to 6800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.03 CV +3 (µA) After 5 minutes
tan
δ
Endurance
Shelf Life
After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Capacitance change ± 20 % of initial measured value
tan
δ
DC leakage current< initial specifi ed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Please see the attached standard products list.
150 % of initial specifi ed value
<
■ Di men sions in mm (not to scale)
[mm]
Pressure relief
(φ6.3<)
Sleeve
✽L
✽ L<16:L±1.0
L>20:L±2.0
φd±0.05
14 min.
3 min.
Body Dia. φD5 6.3 8 1012.516 18
Lead Dia. φd0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φ5toφ8
φD±0.5
F±0.5
φ10<
φD±0.5
(mm)
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Mar. 2008
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
■ Standard Prod ucts (Bi-polar)
Case size Specifi cation Lead Length
W.V.
Cap.
(±20 %)
Dia. Length
Ripple
Current
(120 Hz)
(+8 5 °C
(V) (µF) (mm) (mm)
(mA r.m.s.)
330 8 11.5 250 0.30 0.6 3.5 5.0
470 10 12.5 310 0.30 0.6 5.0 5.0
1000 10 20 430 0.30 0.6 5.0 5.0
6.3
2200 12.5 25 660 0.32 0.6 5.0 5.0
3300 16 25 760 0.34 0.8 7.5 7.5
4700 16 31.5 1170 0.36 0.8 7.5
6800 18 35.5 1450 0.40 0.8 7.5
47 5 11 90 0. 25 0.5 2.0 5.0 2.5
100 6.3 11.2 130 0.25 0.5 2.5 5.0 2.5
220 8 11.5 200 0.25 0.6 3.5 5.0
330 10 16 280 0.25 0.6 5.0 5.0
10
470 10 16 340 0.25 0.6 5.0 5.0
1000 12.5 20 470 0.25 0.6 5.0 5.0
2200 16 25 690 0.27 0.8 7.5 7.5
3300 16 31.5 1090 0.29 0.8 7.5
4700 18 3 5.5 1200 0.31 0.8 7.5
10 5 11 40 0.20 0.5 2.0 5.0 2.5
22 5 11 60 0.20 0.5 2.0 5.0 2.5
33 5 11 80 0.20 0.5 2.0 5.0 2.5
47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5
16
220 10 12.5 260 0.20 0.6 5.0 5.0
330 10 16 330 0.20 0.6 5.0 5.0
470 10 20 380 0.20 0.6 5.0 5.0
1000 12.5 25 560 0.20 0.6 5.0 5.0
2200 16 31.5 750 0.22 0.8 7.5
3300 18 35.5 900 0.24 0.8 7.5
10 5 11 45 0.15 0.5 2.0 5.0 2.5
22 5 11 60 0.15 0.5 2.0 5.0 2.5
33 6.3 11.2 90 0.150.5 2.5 5.0 2.5
47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5
25
100 8 11.5 180 0.15 0.6 3.5 5.0
220 10 16 320 0.15 0.6 5.0 5.0
330 12.5 20 350 0.15 0.6 5.0 5.0
470 12.5 20 4 30 0.15 0.6 5.0 5.0
1000 16 25 680 0.15 0.8 7.5 7.5
2200 18 35.5 900 0.17 0.8 7.5
10 5 11 43 0.15 0.5 2.0 5.0 2.5
22 6.3 11.2 80 0.150.5 2.5 5.0 2.5
33 8 11.5 100 0.15 0.6 3.5 5.0
35
47 8 11.5 120 0.15 0.6 3.5 5.0
100 10 16 230 0.15 0.6 5.0 5.0
220 12.5 20 360 0.15 0.6 5.0 5.0
330 12.5 20 450 0.15 0.6 5.0 5.0
470 12.5 25 590 0.15 0.6 5.0 5.0
Endurance: 85 °C 2000 h (1000 hours for each polarity)
When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.
The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide.
tan
(120 Hz)
(+20 ° C)
)
Lead
δ
Dia.
Straight
Lead Space
Tap ing
B
✽
Tap ing
i
✽
Part No.
(액)(mm)(mm) (mm) (mm) (pcs) (pcs)
ECEA0JN331U( )
ECEA0JN471X( )
ECEA0JN102U( )
ECEA0JN222U( )
ECEA0JN332U( )
ECEA0JN472U
ECEA0JN682U
ECEA1AN470U( )
ECEA1AN101X( )
ECEA1AN221U( )
ECEA1AN331U( )
ECEA1AN471U( )
ECEA1AN102X( )
ECEA1AN222U( )
ECEA1AN332U
ECEA1AN472U
ECEA1CN100U( )
ECEA1CN220U( )
ECEA1CN330U( )
ECEA1CN470U( )
ECEA1CN221X( )
ECEA1CN331U( )
ECEA1CN471U( )
ECEA1CN102U( )
ECEA1CN222U
ECEA1CN332U
ECEA1EN100U ( )
ECEA1EN220X( )
ECEA1EN330U( )
ECEA1EN470U( )
ECEA1EN101U( )
ECEA1EN221U( )
ECEA1EN331U( )
ECEA1EN471U( )
ECEA1EN102U( )
ECEA1EN222U
ECEA1VN100U ( )
ECEA1VN220U( )
ECEA1VN330U( )
ECEA1VN470U( )
ECEA1VN101U( )
ECEA1VN221U( )
ECEA1VN331U( )
ECEA1VN471U( )
Min. Packaging Q'ty
Straight
Leads
Tap ing
200 1000
200 500
200 500
200 500
100 250
100
50
200 2000
200 2000
200 1000
200 500
200 500
200 500
100 250
100
50
200 2000
200 2000
200 2000
200 2000
200 500
200 500
200 500
200 500
100
50
200 2000
200 2000
200 2000
200 2000
200 1000
200 500
200 500
200 500
100 250
50
200 2000
200 2000
200 1000
200 1000
200 500
200 500
200 500
200 500
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Loading...