Panasonic SL-SW951CPC, SL-SW950P, SL-SW950PC, SL-SW951CP User Manual

Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
Model No. SL-SW950/
SL-SW951C
P PC
Portable CD Player
Operating Instructions
The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provid­ed below and keep for future refer­ence. MODEL NUMBER SERIAL NUMBER
RQT6446-P
F0202YH0
Printed in Japan
Attaching the hand strap
Attach the included hand strap to make it easier to carry while jogging.
1 Thread the strap through the loops on the bottom of
the unit.
2 Adjust the buckle and fix it in place.
Hand strap
While jogging, hold the unit as shown.
Safety
1. Power source— Connect the unit to a power source of the type described in these instructions or as marked on the unit.
2. Polarization— The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug does­n’t fit one way, try reversing it. If the plug still doesn’t fit, contact an electrician to replace the obsolete out­let. Do not attempt to defeat the safety purpose of the plug.
3. Power cord protection—Route the AC power sup­ply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it.
4. Overloading—When connecting the AC power sup­ply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock.
5. Nonuse periods— Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. Leaving the unit connected to a household AC outlet for extended periods can cause battery fluid leakage.
6. Attachments and accessories—Use only the at­tachments and accessories recommended in these operating instructions.
Installation
Placement
1. Foreign material—Ensure objects and liquids do not get into the unit. Avoid exposing the unit to ex­cessive smoke, dust, mechanical vibration, and shock.
2. Magnetism— Situate the unit away from equipment and devices that generate strong magnetic fields.
3. Stacking—Do not place anything on top of this unit.
4. Wall and ceiling mounting—Do not mount the unit
on walls or ceilings unless specified in the instruc­tions.
Environment
1. Water and moisture—Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements.
2. Heat—Situate the unit away from heat sources, such as radiators. Do not leave it in an automobile ex­posed to direct sunlight with the doors and windows closed as this may deform the cabinet.
2. Do not situate where temperatures fall below 5 oC
(41 oF) or rise above 35 oC (95 oF).
Maintenance
(See page 7 for details.) Unplug the unit from the household AC outlet before cleaning. Clean with a damp cloth. Do not use abrasive pads, scouring powders, or sol­vents.
Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
1. (a) The AC power supply cord or AC adaptor has
been damaged; or
1. (b) Objects or liquids have gotten into the unit; or
1. (c) The unit has been exposed to rain; or
1. (d) The unit does not operate normally or exhibits a
marked change in performance; or
1. (e) The unit has been dropped or the cabinet dam-
aged.
2. Servicing—Do not attempt to service the unit be­yond that described in these operating instructions. Refer all other servicing to authorized servicing per­sonnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the man­ufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the ser­vicer to perform safety checks to confirm that the unit is in proper working condition.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instruc­tions handy for future reference.
This manual was printed with soy based ink.
SL-SW951C ONLY
To install this product in a car, please refer to the Installation Instructions”.
Bottom of the unit
Supplied Accessories
Check the packing carton for these accessories.
Stereo headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
For SL-SW950
[L0BAD0000160 (gray) or L0BAD0000161 (blue)]
For SL-SW951C
(L0BAD0000160)
Hand strap (RGQT0006-K1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Car adaptor (SH-CDC12PEY). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Car stereo cassette adaptor (SHCDM10B1PYK) . . . . . . . . . . . . . . . . . . . . 1
Panasonic Consumer Electronics Company,
p
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca © 2002 Matsushita Electric Industrial Co., Ltd.
SL-SW951C ONLY
Use numbers indicated in parentheses when asking for replacement parts.
(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site
(http://www.panasonic.com).
1
Using the AC adaptor (not included)
Use only the recommended AC adaptor. Use of other AC adaptors can damage the unit.
Open the rubber cap and connect the AC adaptor.
Note.
Turn the unit off before connecting or disconnecting the AC adaptor.
Conserving power
To save power when the unit is not to be used for a long time, unplug the AC adaptor from the household AC outlet.
Using the rechargeable batteries (not included)
Obtain the optional rechargeable batteries. Make sure to recharge the batteries before using them. The unit cannot be used to charge rechargeable batter­ies other than those specially designed for it.
Optional batteries: P-3GAVA/2B
Recharging procedure
1 Pull the lock release and open the
lid.
Power Supply Preparations
Refer to the specifications (page 8) for information on operating times when using rechargeable batteries or dry cell batteries.
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufac­tured by Matsushita Electric Industrial Co., Ltd.
Using dry cell batteries (not included)
After disconnecting the AC adaptor, insert two “LR6, AA, UM-3” alkaline batteries.
The procedure for inserting and removing dry cell bat­teries is identical to that for rechargeable batteries.
Battery indicator
This indicator flashes when the batteries are almost out of power. Power is cut off a short while later. Recharge the rechargeable batteries or replace the dry cell batter­ies with new ones.
Note!
The length of time the unit will continue to operate be-
tween when the battery indicator starts flashing and when the power is cut off differs depending on the type of batteries used.
The battery indicator may not flash if rechargeable
batteries other than those designated by Panasonic are used.
Using the car adaptor
SL-SW951C includes a car adaptor. Refer to the sepa­rate Installation Instructions”.
For SL-SW950, obtain the car adaptor (SH-CDC9) available as an optional accessory. The car adaptor can be used to recharge the units bat­teries while in the car.
Use only the recommended car adaptor. Use of other car adaptors can damage the unit.
If the battery lid comes loose
1Insert the right-side
hinge into its hole.
2Slightly bend the lid
and insert the left­side hinge into its hole.
2
1
2
If the unit malfunctions or freezes during use, disconnect the power source (the AC adaptor or batteries). Re-connect the power source and continue operation.
Battery indicator
S-XBS
C
2 Open the battery lid, and insert the
rechargeable batteries.
Be sure to close the battery lid properly.
3 Open the rubber cap and connect
the AC adaptor.
(Refer to Using the AC adaptor.) Recharging starts and the H charging indicator flashes on the display. When the rechargeable batteries are fully re­charged the charging indicator disappears.
4 When recharging is complete, un-
plug the AC adaptor from the house­hold AC outlet and DC IN jack.
Note!
Never mix dry cell and rechargeable batteries.Rechargeable batteries have a service life of approxi-
mately 300 charge-discharge cycles. The batteries have reached the end of their operational life if they last for a noticeably shorter time after recharging, or if they cannot be recharged at all. Replace the batteries.
Recharging may only be performed when the unit is
off.
The AC adaptor and rechargeable batteries may be-
come warm while recharging is in progress. This is not a malfunction.
Leaving the AC adaptor connected can cause the bat-
teries to go flat. After recharging the batteries and dis­connecting the AC adaptor from the household AC outlet, ensure you disconnect the adaptor from the units [
K
DC IN 4.5 V] terminal.
Turn the unit off before replacing the rechargeable
batteries.
HOLD Function
This function enables the unit to ignore short, accidental button presses. (The disc lid can still be opened and closed.)
HOLD function prevents the following:
The unit is powered on accidentally when not in use,
causing the batteries to run down.
A button is accidentally pressed during play, interrupt-
ing the operation.
To use the HOLD function
Set [HOLD] to the HOLD position.
HOLD
( Indication
When the unit is in HOLD mode, pressing any button causes the indication “(” to appear on the display.
When the unit is off:
The “(” indication appears only when [1/;] is pressed.
1
+
-
2
Removing batteries
Push up on the battery in the direction indicat­ed by the arrow, then lift out.
Before operating the buttons
Be sure to move [HOLD] to release the unit from the HOLD mode.
HOLD mode
Side panel of the unit
Be sure to cover the headphone jack and DC IN jack with the rubber caps when they are not in use.
For U.S.A.
To order the optional AC adaptor RP-AC46 contact 1-800-332-5368 or web site (http://www.panason­ic.com).
For Canada
Be sure to obtain the optional AC adaptor RP-AC46. It is available through your Panasonic dealer.
HOLD
DC IN 4.5V
K
DC IN jack (
K
DC IN 4.5 V)
Side panel of the unit
Household AC outlet
AC adaptor
2
K
DC IN 4.5V
HOLD
3
Listening to CDs
Basic Play
3
4
2
1
5
S-XBS
TRAIN
RANDOM
VOL
1
M
C
1
2
L
R
VOL
6
HOLD
Plug type:
3.5 mm (1/8 in.) stereo
IncreaseDecrease
Button Display/referenceOperation
To pause play
To stop play
To turn off the
unit
Skip forward/
backward
(skip function)
Rapid forward/
backward
(search function)
Off mode
Stop mode
Follow steps 1–6.
In step 1: Pull the lock release and open the lid. In step 2: Insert the disc. Close the lid and push the lock release into place. In step 3: Connect the stereo headphones to the headphone jack [Ë]. (Plug in firmly.) In step 6: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when
pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The volume returns to 10 when you disconnect the power source.)
Play stops automatically when all the tracks have been played.If the unit has been connected to the car audio system, set this units volume to 10, then adjust the volume level on
the system.
For your reference: ) indication
This indication appears for about 30 seconds if [1/;] is pressed when no disc is loaded in the unit or if the disc is not properly secured.
* indication
This indication appears for about 10 minutes when the cover is opened. (However, the indication does not ap­pear when the unit is turned off.)
Removing discs
1 Press [] to stop play and disc rotation. 2 Slide [4OPEN] to open the lid. 3
Once the disc has stopped, lift the disc out with your finger.
Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs.
Note
!
Never insert foreign objects into the unit.
Auto-off function
If you leave the unit in stop mode for about 10 minutes (30 seconds if disc is not loaded), it turns off to save the batteries.
During program play (page 4), these buttons are
used to skip forward or backward through the programmed sequence of tracks.
You cannot skip to tracks that have been played
in random or random repeat play (page 4).
During program play, 1-track repeat play, random
play and random repeat play (page 4), search op­eration is limited to the current track only.
Press during play.
Press during play.
Press during stop mode.
Press during play. (Press [:] twice to skip to the beginning of the previous tracks.)
Press again to restart play.
Press and hold during play.
Backward
Forward
S-XBS
TRAIN
RANDOM
VOL
1
M
C
S-XBS
TRAIN
RANDOM
VOL
1
M
C
S-XBS
TRAIN
RANDOM
VOL
1
M
C
Total number of tracks
Total playing time
Resume function notes
Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re-
main active if you replace a disc in the off mode.)
Play may resume from the beginning of the next track if you stopped play near the end of a track.The resume function works automatically and cannot be turned off.
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and CD-RW that have been finalized
§
upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.
§
Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW.
No indicator is shown.
Resume function
Play starts from the beginning of the current track the next time you press [1/;].
Elapsed playing time of each track
Track number in play
Label must face upward. Press near the center so the disc clicks firmly into place.
Loading...
+ 5 hidden pages