Panasonic SH-FX85 User Manual

Designed for Panasonic DVD Home Theater Sound Systems that are compatible with the SH-FX85.
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
System
Digital transmitter
Wireless sound system
P PC
p
SH-FX85
SH-FX85T
SB-FX85
Operating Instructions
Wireless Sound System
Model No. SH-FX85

Table of Contents

Introduction

IMPORTANT SAFETY INSTRUCTIONS .................................................................. 3
Maintenance............................................................................................................. 3
Product Service ........................................................................................................ 3
Use
Setup ........................................................................................................................ 4
Connections .......................................................................................................... 4
Control reference guide ............................................................................................ 6
Enjoying audio from the home theater unit............................................................... 6
Using this unit as a stand-alone audio amplifier....................................................... 7
To enjoy audio from an external device ................................................................. 7
To use the iPod
Reference
Limited Warranty (ONLY FOR U.S.A.)...................................................................... 8
Limited Warranty (ONLY FOR CANADA) ............................................................... 10
Troubleshooting guide ............................................................................................ 11
Specifications ......................................................................................................... 12
Accessory
Please check and identify the supplied accessory. Use number indicated in parentheses when asking for replacement part. (Product number correct as of January
2007. This may be subject to change.)
For U.S.A.: To order this accessory, refer to “Accessory Purchases” on page 9. For Canada: To order this accessory, call the dealer from whom you made your purchase.
1 AC power supply cord (K2CB2CB00018)
For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
®
.................................................................................................... 7
RQTX0051-Y
F0107TM0
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO
ENGLISH
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
RQTX0051
2
DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC caution: To maintain compliance with FCC regulations, shielded interface
cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-7262
WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
THE FOLLOWING APPLIES ONLY IN CANADA
This device complies with RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that
may cause undesired operation of the device.

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- If you see this symbol-
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

Maintenance

Clean this unit with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.Before using chemically treated cloth, carefully read the instructions that came with
the cloth.

Product Service

1. Damage requiring service—The unit should be serviced by qualified service
personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 9. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.
ENGLISH
Maintenance / /
Product Service
IMPORTANT SAFETY INSTRUCTIONS
RQTX0051
3

Setup

Preparation
Turn off all equipment before connection and read the appropriate operating instructions.Connect the AC power supply cord after all other connections are complete.
Wireless setup diagram
e.g.
ENGLISH
Main room
Home theater unit
To avoid interference, maintain the following distances between the wireless sound system and other electronic devices that use the same radio frequency (2.4 GHz band).
Wireless sound system
Wireless LAN: approx. 2 m (6-1/2 ft)
Setup
Wireless sound system
Place the wireless sound system within approximately 30 m (98 ft) from the home theater unit.
Other room
[Note[
Do not use the wireless sound system and digital transmitter in a metal cabinet or
bookshelf.
Depending on your wall thickness and material, the operating range may be
reduced.
You can use up to 3 wireless sound systems at the same time, in different rooms.
Connections
Digital transmitter
Refer also to the operating instructions for your home theater unit.
Do not insert or remove while the home theater unit is on.
SH-FX85T digital transmitter
Insert fully until you hear a click. e.g. Rear of the home theater unit
For users using the SH-FX65T transmitter
DIGITAL
RQTX0051
TRANSMITTER
4
card, replace it with the SH-FX85T. your SH-FX65T transmitter card in a cool dry place for later use.
Store
Cordless phone and other electronic devices: approx. 2 m (6-1/2 ft)
The wireless sound system will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator [e.g. “ [W2] ” (SC-PTX7: “ [W1] ”)] flashes on the home theater unit, and there is a brief interruption in audio coming from the wireless sound system.
This is the normal operation of the product working to assure the best possible performance of your home theater unit.
If the interference persists, try moving the other devices to another location outside the range of the wireless sound system, or move the wireless sound system nearer to your home theater unit.
AC cord
Raise the antenna mast for best reception.
To household AC outlet (AC 120 V, 60 Hz)
AC IN
AC power supply cord
Loading...
+ 8 hidden pages