Panasonic SH-DX1200 User Manual

Audio Mixer

Operating Instructions

Model No.

SH-DX1200

EB GN

Note:

The “ EB ” indication shown on the packing case
indicates United Kingdom.

Before connecting, operating or adjusting this prod­uct, please read these instructions completely.
Please keep this manual for future reference.

RQT5375-B

Dear customer

Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.

Contents

Caution for AC mains lead............................................... 3

Suggestions for safety.....................................................4

Features ............................................................................. 5

Connections ...................................................................... 6

Names of the p a r t s ........................................................... 8

Block diagram ................................................................. 10

Maintenan c e ....................................................................11

Troubleshooting guide................................... Back cover

Specifications ................................................. Back cover

Supplied accessories

Please check and identify the supplied
accessories.
Use numbers indicated in parentheses
when asking for replacement parts.

Sticker ............................................................................1pc.

AC mains le a d ...............................................................1pc.

For United Kingdom (VJA0733)

For Australia and New Zealand (RJA0035-K)

2

RQT5375

Note

The included AC mains lead is for use with this unit only. Do
not use it with other equipment.

Caution for AC mains lead

(For United Kingdom)

(“EB” area code model only)

For your safety, please read the following text care­fully.

This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark m or the BSI mark o on
the body of the fuse.

If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUIT­ABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE RE­MOVED AND THE PLUG CUT OFF AND DIS­POSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRI­CAL SHOCK IF THE CUT OFF PLUG IS IN­SERTED INTO ANY 13-AMPERE SOCKET.

WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL n OR
COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A

If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accor­dance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the col­oured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or col­oured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or
coloured Brown or Red.

Figure B

2. Replace the fuse and close or attach the fuse
cover.

Figure A

Figure B

Fuse cover

Fuse
(5 ampere)

Fuse
(5 ampere)

3

RQT5375

Suggestions for safety

Placement

Avoid placing the unit in areas of:

¡direct sunlight
¡high temperature
¡high humidity
¡excessive vibration
¡uneven surfaces (Place the unit on a flat level surface.)

Such conditions might damage the cabinet and/or other component
parts and thereby shorten the unit’s service life.
To protect the unit against sound distortion and acoustical effects,
please place the unit at least 15 cm away from wall surfaces etc.

Stacking

Never place heavy items on top of the unit or the AC mains lead.

Voltage

¡It is very dangerous to use an AC power source of high voltage

such as for an air conditioner.
A fire might be caused by such a connection.

¡A DC power source can not be used.

Be sure to check the power source carefully, especially if on a
ship or other place where DC is used.

Foreign materials

¡Ensure that no foreign objects, such as needles, coins,

screwdrivers etc., accidentally fall into the unit.
Otherwise, a serious electric shock or malfunction could occur.

¡Be extremely careful about spilling water or liquid on/into the unit,

as a fire or electric shock could occur.
(Disconnect the power plug and contact your dealer immediately if
this occurs.)

¡Avoid spraying insecticides onto the unit as they contain

flammable gases which can be ignited.

¡Insecticides, alcohol, paint thinner and similar chemicals should

never be used to clean the unit as they can cause flaking or
cloudiness to the cabinet finish.

Service

¡Never attempt to repair, disassemble or reconstruct the unit if

there seems to be a problem.
A serious electric shock could result if you ignore this precaution­ary measure.

¡If a problem occurs during operation (the sound is interrupted,

indicators fail to light up, smoke is detected, etc.) contact your
dealer or Authorized Service Center immediately.

¡Disconnect the power supply if the unit will not be used for a long

time. Otherwise the operation life could be shortened.

AC mains lead protection

¡Avoid cuts, scratches or poor connection of the AC mains lead, as

this may result in fire or electric shock.
Excessive bending, pulling or slicing of the AC mains lead should
also be avoided.

¡Do not pull on the AC mains lead when you are disconnecting the

power, as this could cause an electric shock. Grasp the plug firmly
when you disconnect the AC mains lead.

¡Never touch the plug with wet hands or a serious electric shock

could result.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING.

Insertion of connector

Even when the connector is perfectly in­serted, depending on the type of inlet
used, the front part of the connector may
jut out as shown in the drawing.
However there is no problem using the
unit.

Approx. 6 mm
Appliance inlet

Connector

4

RQT5375