Do the procedures with the remote control. You can
also use the buttons on the main unit if they are the
same.
Your system and the illustrations can look differently.
These operating instructions are applicable to the
following system.
SystemSC-MAX370
Main unitSA-MAX370
Front SpeakersSB-MAF370
SubwoofersSB-MAW370,
SB-MAY370
About descriptions in these Operating Instructions
• Titles to be referred to are indicated as “> ±±”.
• Unless otherwise indicated, operations are
described using the remote control.
VQT5K85
2
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or product damage,
- Do not expose this unit to rain, moisture, dripping or
splashing.
- Do not place objects filled with liquids, such as vases, on
this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
• Do not let metal objects fall inside this unit.
CAUTION!
Unit
• To reduce the risk of fire, electric shock or product damage,
- Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
- Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
- Do not place sources of naked flames, such as lighted
candles, on this unit.
• Set this unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and excessive
vibration.
• This unit is intended for use in moderate climates.
• The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged
from the socket outlet immediately.
• This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
• This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Battery
• Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
• When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
• Do not break open or short-circuit the battery.
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Remove the battery if you do not use the remote control for
a long period of time. Keep in a cool, dark area.
CAUTION!
• Use the speakers only with the recommended
system. If not, you can cause damage to the
amplifier and speakers and can cause a fire.
• Consult an approved service personnel if damage
occurs or if there is a sudden apparent change in
performance.
• Do the procedures included in these instructions
when you attach the speakers.
• Be careful when babies or children are near.
Caution for AC mains lead
Figure AFigure B
Fuse cover
Figure AFigure B
Fuse (13 ampere)
Fuse (13 ampere)
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 13-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 13-ampere and that
it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Supplied accessories
Check and identify the supplied accessories.
1 x AC mains lead
1 x AM loop antenna
1 x FM indoor antenna
1 x Antenna plug adaptor
1 x Remote control battery
1 x Remote control
4 x Stacking bracket
Note:
• Product numbers are correct as of May 2014. These may
• Keep the antenna plug adaptor out of reach of children to
Put on the floor or a sturdy shelf to reduce vibration.
CAUTION!
Do not touch the subwoofer cones reverberating
surfaces:
• This may damage the subwoofer cone.
• The subwoofer cone may be hot.
VQT5K85
3
Use only the supplied speakers.
Stacking bracket
SB-MAW370
SB-MAF370
Stacking bracket
SB-MAW370
You can cause damage to the system and decrease the
sound quality if you use other speakers.
Note:
• Keep your speakers more than 10 mm from the main
unit for ventilation.
• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
• When you play at high levels for a long period, it can
cause damage to the speakers and decrease the life of
the speakers.
• Decrease the volume in these conditions to prevent
damage:
- When the sound is distorted.
- When you adjust the sound quality.
Maintenance
To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean
this system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Preparing the remote control
Stacking the speakers
1 Put the stacking bracket on top of the subwoofer
SB-MAW370/SB-MAY370.
Press down the stacking bracket until it is secured in
position.
e.g:
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
VQT5K85
4
2 Stack the speakers according to Setup 1 or
Setup 2. (> “Placement of speakers”).
Example: Stacking of front speaker in Setup 1
arrangement.
Making the connections
SUB
WOOFER
SB-
MAW
370
SBMAW
370
SBMAY
370
SBMAF
370
SBMAY
370
SBMAF
370
SUB
WOOFER
SUB
WOOFER FRONT FRONT
SUB
WOOFER
SB-
MAY370
SB-
MAW370
SB-
MAW370
SB-
MAY370
SB-
MAY370
SB-
MAW370
SB-
MAW370
SB-
MAY370
1a
1b
SUB
WOOFER
SB-
MAW
370
SBMAW
370
SBMAY
370
SBMAF
370
SBMAY
370
SBMAF
370
SUB
WOOFER
SUB
WOOFER FRONTFRONT
SUB
WOOFER
Ta pe
(not supplied)
Antenna plug adaptor
FM outdoor antenna
(not supplied)
To household
mains socket
Connect the AC mains lead only after all the other connections have been made.
1 Connect the speakers.
Connect the speaker cables to the terminals of the same colour.
2 Connect the FM indoor antenna.
Put the antenna where reception is best.
• Use an FM outdoor
antenna if radio
reception is poor.
• Attach the antenna plug
adaptor, when using an
FM outdoor antenna.
3 Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
4 Connect the AC mains lead.
Do not use AC mains lead with other equipment.
Conserving power
The system consumes approximately 0.3 W when it
is in standby mode. Disconnect the power supply if
you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
VQT5K85
5
Overview of controls
SOUNDPRESET EQ
EDIT
MODE
USB
CD HI-SPEED
MEMORY
MODE
DISPLAY
DIMMER
SLEEP
PLAY/
REC
AUTO OFF
ABC
TUV
JKL
P
QRS
GHI
W
XYZ
MNO
DEF
T
I
T
L
E
S
E
A
R
C
H
P
L
A
Y
L
I
S
T
PRESET EQ
VOCAL CANCEL ECHOKEY-CON
MEMORY PLAYLIST / DJ FUNCTION
123
4
DJ JUKEBOX DJ SAMPLER DJ EFFECT
-KARAOKE
56
MANUAL EQ
ALBUM/ TRACK
TUNE MODE
/MEMORY
- PAIRING
USB / CD
RADIO/EXT-IN
USB REC MEMORY REC
OPEN CLOSE
MULTI CONTROL
D.BASS
- SUPER WOOFER
LOCAL
Remote control
Top v i ew
VQT5K85
6
Front view
PLAY
REC/PLAY
ILLUMINATION
A
B
MIC
MIC
VOL 1
AUX IN4 MIC1MIC2MINMAXMINMAX
VOL 2
- VOLUME +
1 Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Alphanumeric buttons
To select a 2-digit number
Example: 16: [S10]
To set a character
Example: B: [2]
3 Delete a programmed track
Delete a selected track in a playlist
4 Select audio source
5 Basic playback control
6 Select the sound effects
7 Start the title search for internal memory
8 View content information
Press and hold the button: Decrease the
brightness of the display panel and turn off the DJ
function buttons and illumination, etc.
9 Recording operation control
: Set the play timer or record timer
; Set the clock and timer
< Set the sleep timer
Press and hold the button: Automatically switch off
function switches off the system if you do not use the
system for 20 minutes. (Except radio)
>[1]>[6]
>[2]
= Set the programme function
> Adjust the volume of the system
? Mute the sound of the system
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the
volume or when you switch off the system.
@ Set the play menu item
A Internal memory playlist operation
B Select and enter buttons
C Set the edit mode for and internal memory
D Internal memory playlist direct buttons
Press and hold to add a track to the corresponding
playlist.
Press to select the playlist.
DJ function direct buttons
Press [DJ JUKEBOX], [DJ SAMPLER] or [DJ
EFFECT-KARAOKE] to switch on the DJ function.
Press [1] to [6] on main unit to select the desired
function.
To cancel, press the selected [1] to [6] again.
E Switch on the DJ function
To cancel, press the button again.
F Turntable for DJ and multi control
G Browse playlist of the internal memory
Browse tracks or albums
Turn [MULTI CONTROL] to browse the track.
Press [1/;] to start playback from the selection.
Press [ALBUM/TRACK] to select album or track and
then turn [MULTI CONTROL] to browse.
Press [1/;] to start playback from the selection.
H Open or close the disc tray
I Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left and
right
J Display panel
K PLAY
USB port ()
USB status indicator
L REC/PLAY
USB port ()
USB status indicator
M Select the illumination effect
N AUX IN 4 terminal
O Microphone jack
P Adjust the volume of the microphone
Q NFC touch area
R Disc tray
VQT5K85
7
Disc
Playing disc
1
Press [OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [OPEN/CLOSE] again to close the disc
tray.
2 Press [CD] and then press [1/;] to start
playback.
• Stop playback
Press [∫].
• Pause playback
Press [1/;].
Press again to continue playback.
• Skip album
Press [3, 4].
• Skip track
Press [:] or [9]
(main unit: [:/6] or [5/9]).
• Search through track
Press and hold [6] or [5]
(main unit: [:/6] or [5/9]).
Viewing available information
You can view the available information on the display
panel.
Press [DISPLAY-DIMMER] during playback.
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1.0, ver. 1.1 and ver. 2 ID3 tags.
• Text data that the system does not support can show
VQT5K85
differently.
8
Play menu
1 Press [PLAY MENU] to select “PLAYMODE” or
“REPEAT”.
2 Press [2, 1] and then press [OK] to select the
desired mode.
PLAYMODE
•OFF PLAYMODE
Play all tracks.
• 1-TRACK
Play one selected track on the disc.
Press the alphanumeric buttons to select the track.
• 1-ALBUM
Play one selected album on the disc.
Press [3, 4] to select the album.
• RANDOM
Play a disc randomly.
• 1-ALBUM RANDOM
Play all tracks in one selected album randomly.
Press [3, 4] to select the album.
REPEAT
• ON REPEAT
Repeat playback.
“`” appears.
• OFF REPEAT
Cancel repeat playback.
Note:
The setting returns to the default “OFF PLAYMODE” when
you open the disc tray.
Programme playback
This function allows you to programme up to 24 tracks.
1 Press [PROGRAM] in the stop mode.
“PGM” or “PROGRAM” is shown.
2
Press the alphanumeric buttons to select the
desired track.
Do this step again to programme other tracks.
1 Press [3, 4] to select the desired album.
2 Press [9] and then press the alphanumeric
buttons to select the desired track.
3 Press [OK].
Do these steps again to programme other tracks.
3 Press [1/;] to start playback.
• Cancel programme mode
Press [PROGRAM] in the stop mode.
• Check programme contents
Press [:] or [9] when “PGM” is shown in the
stop mode.
• Clear the last track
Press [DEL] in the stop mode.
• Clear all programmed tracks
Press [∫] in the stop mode.
“CLR ALL” is shown.
Within 5 seconds, press [∫] again.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.